Items where Research Area is "Mechanical, aeronautical and manufacturing engineering"

Up a level
Export as [feed] Atom [feed] RSS
  • Research Areas (21965)
    • Mechanical, aeronautical and manufacturing engineering (781)
Group by: First Author/Editor | Item Type | Year
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 781.

A

AINI, R., RAHNEJAT, H. and GOHAR, R. (1990) A five degrees of freedom analysis of vibrations in precision spindles. International Journal Of Machine Tools & Manufacture, 30(1), pp. 1-18. ISSN (print) 0890-6955

Abde Qader Alzu'bi, Hamzeh Mahmoud, Abd Allateef, Imad Abd, Zweiri, Yahya, Alkhateeb, Basim and Al-Majali, Yahya Taha Ayed (2015) Abde Qader Alzu'bi; Hamzeh Mahmoud, Allateef; Imad Abd, Zweiri; Yahya, Alkhateeb; Basim, Ayed Al-Majali; Yahya Taha Sided performance coaxial vertical take-off and landing UAV and pitch stability technique using oblique active tilting. US 8,931,729 B2.

Abde Quader Alzu'bi, Hamzeh Mahmoud [Inventor], Abd Allateef, Imad [Inventor], Zweiri, Yahya [Inventor], Alkhateeb, Basim [Inventor] and Al-Majali, Yahya Taha Ayed [Inventor] (2013) King Abdullah II Design and Development Bureau Sided performance coaxial vertical takeoff and landing (vtol) uav and pitch stability technique using oblique active tilting (oat). US20130105620.

Aboutorabi, A., Ghasemnejad, H. and Hadavinia, H. (2010) Analytical approach for progressive failure crushing modes of woven FRP composite box structures. World Journal of Engineering, 7(3), pp. 154-162. ISSN (print) 1708-5284

Abulrub, Abdul-Hadi G., Sahinkaya, Necip, Burrows, Clifford R. and Keogh, Patrick S. (2009) Performance assessment of a multi-frequency controller applied to a flexible rotor magnetic bearing system - contact dynamics. In: Ulbrich, Heinz and Ginzinger, Lucas, (eds.) Motion and Vibration Control: Selected Papers from MOVIC 2008. London, U.K. : Springer. pp. 11-20. ISBN 9781402094378

Abulrub, Abdul-Hadi G., Sahinkaya, M. Necip and Burrows, Clifford R. (2009) An adaptive weighting control strategy to avoid magnetic bearing contact. In: ASME 2009 Dynamic Systems and Control Conference; 12–14 Oct 2009, Hollywood, California, USA. (ASME 2009 Dynamic Systems and Control Conference) ISBN 9780791848920

Abulrub, Abdul-Hadi G., Sahinkaya, M. Necip, Keogh, Patrick S. and Burrows, Clifford R. (2005) Effective model reduction for magnetically levitated flexible rotors including contact dynamics. In: International Design Engineering Technical Conferences and Computers and Information in Engineering Conference; 24-28 Sep 2005, Long Beach, California, USA. (ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Volume 1) ISBN 0791847381

Adjali, H., Davies, M., Rees, R.W. and Littler, J. (1999) The testing of a numerical model's ability to simulate heat transfer from slab-on-grade floors and the implication for low-energy design. In: Proceedings of the National Passive Solar Conference 1999; 12 -16 Jun 1999, Portland, U.S.A.. ISBN 9780895531711

Adjali, H., Davies, M. and Littler, J. (1998) Three-dimensional earth-contact heat flows: a comparison of simulated and measured data for a buried structure. In: World Renewable Energy Conference; Sept, 1998, Florence, Italy.

Adjali, M.H., Davies, M., Ni Riain, C. and Littler, J.G. (2000) In-situ measurements and numerical simulation of heat transfer beneath a heated ground floor slab. Energy and Buildings, 33(1), pp. 75-83. ISSN (print) 0378-7788

Adjali, M.H., Davies, M. and Littler, J. (1998) Review paper - Earth-contact heat flows: Review and application of design guidance prediction. Building Services Engineering Research and Technology, 19(3), pp. 111-121. ISSN (print) 0143-6244

Adnan, Adnan (2011) Development of outsourcing decision models for small and medium sized manufacturing companies. (PhD thesis), Kingston University.

Aghajani, Hamed, Dembele, Siaka and Wen, Jennifer (2013) Modelling of Sprinkler Sprays using Deterministic and Stochastic Approaches. In: 7th International Seminar on Fire and Explosion Hazards (ISFEH); 5 – 10 May 2013, Providence, USA. ISBN 9789810759407

Aghajani, Hamed (2013) Modelling the initial spray characteristics of fire sprinklers. (PhD thesis), Kingston University.

Aghajani, Hamed, Dembele, Siaka and Wen, Jennifer (2011) Modeling sprinkler sprays. In: FM Global Open Source CFD Fire Modelling Workshop 2011; 9-10 May 2011, Norwood, USA. (Unpublished)

Ahmadi, H, Liaghat, GH, Shokrieh, M M, Hadavinia, H, Ordys, A and Aboutorabi, A (2015) Quasi-static and dynamic compressive properties of ceramic microballoon filled syntactic foam. Journal of Composite Materials, 49(10), pp. 1255-1266. ISSN (print) 0021-9983

Ahmadi, H., Liaghat, G.H., Shokreih, M. M., Aboutorabi, A., Hadavinia, H. and Ordys, A. (2014) Compressive properties of nanoclay-reinforced syntactic foams at quasi-static and high strain rate loading. Polymer-Plastics Technology and Engineering, 53(10), pp. 990-999. ISSN (print) 0360-2559

Al-Ja'afreh, T., Zweiri, Y., Seneviratne, L. and Althoefer, K. (2008) A new soft-tissue indentation model for estimating circular indenter 'force-displacement' characteristics. Institution of Mechanical Engineers. Proceedings. Part H: Journal of Engineering in Medicine, 222(1), 805 - 815. ISSN (print) 0954-4119

Al-Khazali, H. and Askari, M. (2013) Gyroscopic effects on a cantilever rotor system – a comparative analysis. In: NWC2013, NAFEMS 14th World Congress; 9-12 June 2013, Salzburg, Austria. (Unpublished)

Al-Khazali, H. and Askari, M. (2012) Dynamic investigational using the spectral chart wizard and modal testing data in rotors systems. International Review of Modelling and Simulations (IREMOS), 5(3), pp. 1360-1367. ISSN (print) 1974-9821

Al-Khazali, H. and Askari, M. (2012) Significance of fault diagnosis and reduced shock module in rotating machinery by data collectors using trending software and modal analysis. In: 3rd International Conference on Modelling and Simulations (ICOMOS 2012 - VF); 16-30 July 2012, Naples, Italy.

Al-Khazali, H. and Askari, M. (2012) Significance of fault diagnosis and reduced shock module in rotating machinery by data collectors using trending software and modal analysis. International Review of Modelling and Simulations, 5(4), pp. 1867-1875. ISSN (online) 1974-983X

Al-Khazali, H. and Askari, M. (2011) Condition monitoring and fault diagnosis in rotating machinery using modal test & finite element analysis. In: The 4th International Conference: Computational Mechanics and Virtual Engineering COMEC 2011; 20-22 Oct 2011, Brasov, Romania. (Unpublished)

Al-Khazali, H. A. H. and Askari, M. R. (2011) Application of modal testing and finite element modelling in rotating structures. In: 2nd International Conference on Modelling and Simulations (ICOMOS - VF) Virtual Forum 2011; 11-25 Jul 2011, Naples, Italy. (Unpublished)

Al-Khazali, H. A. H. and Askari, M. R. (2011) Experimental technique to investigate vibration monitoring in revolving structures using oscilloscopic/modal testing. International Journal of Engineering Science and Technology, 3(10), pp. 7799-7814. ISSN (online) 0975-5462

Al-Khazali, H.A. and Askari, M.R. (2012) Importance of using vibration signal characteristics for the diagnosis of rotor vibrations. In: ICAST 2012, 23rd International Conference on Adaptive Structures and Technologies; 11-13 October 2012, Nanjing, China. (Unpublished)

Al-Khazali, H.A. and Askari, M.R. (2011) Accurate identification of performance for rotor-bearing systems using the modified modelling under gyroscopic effect. International Journal of Modern Engineering Research, 1(2), pp. 527-537. ISSN (online) 2249-6645

Al-Khazali, H.A. and Askari, M.R. (2011) Modal analysis design to exposure gyroscopic effect in rotating machinery using experimental and analytical/computational techniques. International Journal of Engineering Science and Technology, 3(9), pp. 7234-7243. ISSN (online) 0975-5462

Al-Khazali, H.A.H. and Askari, M.R. (2013) Improvement of safety engineering design in rotating structures by detection of resonance frequency signals. In: SEM 2013 Annual Conference & Exposition on Experimental and Applied Mechanics; 3-5 June 2013, Lombard, USA. (Unpublished)

Al-Khazali, H.A.H. and Askari, M.R. (2012) Detect resonance frequency in rotor machines for improve safety engineering design. In: 7th International IET System Safety Conference, incorporating the Cyber Security Conference 2012; 15-18 October 2012, Edinburgh, UK. (Unpublished)

Al-Khazali, H.A.H. and Askari, M.R. (2012) Investigate balancing in rotating structures using modal testing and analysis results for structural health monitoring purpose and design. International Review of Modelling and Simulations (IREMOS), 5(5 A), pp. 2104-2118. ISSN (print) 1974-9821

Al-Khazali, H.A.H. and Askari, M.R. (2012) Investigational analysis using Lissajous figures in rotating machinery. International Journal of Mechanical Engineering and Materials Science, 5(2), pp. 77-82. ISSN (print) 0974-584x (Submitted)

Al-Khazali, H.A.H. and Askari, M.R. (2012) System Identification in Rotating Structures using Vibration and Modal Analysis. In: Allemang, R. , De Clerck, J. , Niezrecki, C. and Blough, J.R., (eds.) Topics in Modal Analysis I, Volume 5. New York, U.S. : Springer-Verlag. pp. 481-497. (Conference Proceedings of the Society for Experimental Mechanics, no. 30) ISSN (print) 2191-5644 ISBN 9781461424246

Al-Khazali, H.A.H. and Askari, M.R. (2012) System identification in rotating structures using vibration and modal analysis. In: IMAC XXX Conference and Exposition on Structural Dynamics, 30 years of Modal Analysis, From laboratory to real world.; 30 Jan - 02 Feb 2012, Florida, U.S.. (Unpublished)

Al-Khazali, H.A.H. and Askari, M.R. (2011) Detection of gyroscopic effect in rotating machinery from the modal data. In: National Symposium on Rotordynamics (NSRD-2011); 19-21 Dec 2011, Madras, India. (Unpublished)

Al-Khazali, H.A.H. and Askari, M.R. (2011) Validation of modal data in rotating machinery using finite element analysis. In: ICAST 2011, 22nd International conference on adaptive structures and technologies, University of Patras, Greece; 10-12 Oct 2011, Corfu, Greece. (Unpublished)

Al-Khazali, Hisham and Askari, Mohamad (2012) Thermal effects for shaft–pre-stress on rotor dynamic system. International Journal of Research and Reviews in Applied Sciences, 11(2), pp. 285-290. ISSN (print) 2076-734X

Al-Khazali, Hisham (2011) Establish a system identification methodology of modal testing using the analytical/computational techniques in rotating machinery. In: 2011 ANSYS UK User Conference; 09 Nov 2011, Gaydon, U.K.. (Unpublished)

Al-Khazali, Hisham A. and Askari, Mohamad R. (2011) Computer simulation to investigate system identification and vibration monitoring in rotor dynamic analysis. International Journal of Advances in Science and Technology, 3(4), pp. 1-15. ISSN (print) 2229-5216

Al-Khazali, Hisham A.H. and Askari, Mohamad R. (2012) Analyzing rotating data for machines rotor with high speeds using the spectral map wizard. International Journal of Scientific and Engineering Research, 3(6), pp. 1-11. ISSN (print) 2229-5518

Al-Khazali, Hisham A.H. and Askari, Mohamad R. (2012) Defect diagnosis in rotors systems by vibrations data collectors using trending software. International Journal of Advanced Computer Science and Applications, 3(5), pp. 33-43. ISSN (print) 2158-107X

Al-Khazali, Hisham A.H. and Askari, Mohamad R. (2012) Determination and simulation of modal parameter on revolving machines using vibration analysis. In: EACS 2012 5th European Conference on Structural Control; 18-20 June 2012, Genoa, Italy.

Al-Khazali, Hisham A.H. and Askari, Mohama R. (2012) Geometrical and graphical representations analysis of lissajous figures in rotor dynamic system. IOSR Journal of Engineering, 2(5), pp. 971-978. ISSN (online) 2250-3021

Al-Khazali, Hisham A.H. and Askari, Mohamad R. (2012) Improvement modal testing in dynamics revolves structures to investigate the gyroscope effect performance. International Journal of Science and Technology, 1(3), pp. 151-163. ISSN (online) 2049-7318

Al-Khazali, Hisham A.H. and Askari, Mohamad R. (2012) The experimental analysis of vibration monitoring in system rotor dynamic with validate results using simulation data. ISRN Mechanical Engineering, 2012, ISSN (print) 2090-5122

Al-Khazali, Hisham Ahmad Humadi (2012) Application of modal testing methods in rotating machinery. (PhD thesis), Kingston University.

Al-Khazali, Hisham Ahmad Humadi (2011) Balancing in rotating machinery using system identification/modal analysis. In: Faculty of Science, Engineering and Computing Research Seminar; 30 Nov 2011, London, U.K.. (Unpublished)

Al-Khazali, Hisham Ahmad Humadi (2011) Discover gyroscopic effect in rotating structures using experimental modal analysis and finite element data. In: Conference of Engineering Sciences; 01-02 Oct 2011, London, UK. (Unpublished)

Al-Khudairi, O., Hadavinia, H., Waggott, A., Lewis, E. and Little, C. (2015) Characterising Mode I/Mode II Fatigue Delamination Growth in Unidirectional Fibre Reinforced Polymer Laminates. Materials & Design, 66(A), pp. 93-102. ISSN (print) 0264-1275

Al-Khudairi, O. and Ghasemnejad, H. (2015) To improve failure resistance in joint design of composite wind turbine blade materials. Renewable Energy, 81, pp. 936-951. ISSN (print) 0960-1481

Al-Khudairi, Othman, Hadavinia, Homa, Lewis, Eoin, Osborne, Barnaby and Bryars, Lee S. (2014) Building delamination fracture envelope under Mode I / Mode II loading for FRP composite materials. In: Elmarakbi, Ahmed, (ed.) Advanced composite materials for automotive applications: structural integrity and crashworthiness. Chichester, U.K. : John Wiley & Sons. pp. 293-310. (Automotive Series) ISBN 9781118423868

Al-Khudairi, Othman (2014) Structural performance of horizontal axis wind turbine blade. (PhD thesis), Kingston University.

Alam, Maqsood, Dembele, Siaka, Madhav Rao, Vendra C. and Wen, Jennifer (2016) Numerical prediction of liquid pool fires burning rate with a CFD approach. In: Interflam 2016 : 14th International International Conference and Exhibition on Fire Science and Engineering; 04 - 06 Jul 2016, Windsor, U.K..

Aljaafreh, Talal, Zweiri, Yahya, Seneviratne, Lakmal and Althoefer, Kaspar (2006) Force displacement modelling of soft tissue-tool interactions using circular indentors during indentation test. In: International Conference on Autonomous Robots and Agents (ICARA); 12-14 Dec 2006, Palmerston North, New Zealand. (Proceedings of the 3rd International Conference on Autonomous Robots and Agents)

Allouis, E., Ellery, A. and Welch, C.S. (2006) Entry descent and landing systems for small planetary missions: parametric comparison of parachutes and inflatable systems for the proposed Vanguard Mars mission. Acta Astronautica, 59(8-11), pp. 911-922. ISSN (online) 0094-5765

Allouis, E., Ellery, A. and Welch, C.S. (2003) Entry descent and landing systems for small planetary missions: parametric comparison of parachutes and inflatable systems for the proposed Vanguard Mars mission. In: Fifth IAA International Conference on Low-Cost Planetary Missions; 24 - 26 Sep 2003, Noordwijk, Netherlands.

Almansour, F.A., Dhakal, H.N., Zhang, Z.Y. and Ghasemnejad, H. (2015) Effect of hybridization on the mode II fracture toughness properties of flax/vinyl ester composites. Polymer Composites, ISSN (print) 0272-8397 (Epub Ahead of Print)

Althoefer, K., Lara, B., Zweiri, Y. H. and Seneviratne, L. D. (2008) Automated failure classification for assembly with self-tapping threaded fastenings using artificial neural networks. Journal Of Mechanical Engineering Science - Part C, 222(6), pp. 1081-1095. ISSN (print) 0954-4062

Althoefer, Kaspar, Tan, Choo Par, Zweiri, Yahya H. and Seneviratne, Lakmal D. (2009) Hybrid soil parameter measurement and estimation scheme for excavation automation. IEEE Transactions on Instrumentation and Measurement, 58(10), pp. 3633-3641. ISSN (print) 0018-9456

Althoefer, Kaspar [Inventor], Zweiri, Yahya H. [Inventor], Seneviratne, Lakmal [Inventor] and Tan, Choo Par [Inventor] (2005) Kings College London Method of estimating parameters of a medium to be moved by a digging apparatus. WO2005/103396.

Alvarenga, Jessica, Vitzilaios, Nikolaos I., Rutherford, Matthew J. and Valavanis, Kimon P. (2016) Modeling and Frequency-Domain Parameter Identification of a Small-Scale Flybarless Unmanned Helicopter. In: Blockley, Richard and Shyy, Wei, (eds.) The Encyclopedia of Aerospace Engineering. Wiley. ISBN 9780470686652

Alvarenga, Jessica, Vitzilaios, Nikolaos I, Rutherford, Matthew J. and Valavanis, Kimon P (2015) Survey of Unmanned Helicopter Model-Based Navigation and Control Techniques. Journal of Intelligent and Robotic Systems, 80(1), pp. 87-138. ISSN (print) 0921-0296

Alvarenga, Jessica, Vitzilaios, Nikolaos I., Rutherford, Matthew J. and Valavanis, Kimon P. (2015) Scaled control performance benchmarks and maneuvers for Small-Scale Unmanned Helicopters. In: 54th IEEE Conference on Decision and Control; 15–18 Dec, 2015, Osaka, Japan. ISBN 9781479978847

Alzu'bi, Hamzeh Mahmoud Abde Quader [Inventor], Allateef, Imad Abd [Inventor], Zweiri, Yahya [Inventor], Alkhateeb, Basim [Inventor] and Al-Masarwah, Ibrahem Mubarak Saleem [Inventor] (2013) King Abdullah II Design and Development Bureau Quad tilt rotor vertical take off and landing (vtol) unmanned aerial vehicle (uav) with 45 degree rotors. US20130105635.

Amiri-Rad, Ahmad, Mashayekhi, Mohammad, van der Meer, Frans P. and Hadavinia, Homa (2015) A two-scale damage model for high cycle fatigue delamination in laminated composites. Composites Science and Technology, 120(4), pp. 32-38. ISSN (print) 0266-3538

Antoniadis, I.A., Venetsanos, D. T. and Papaspyridis, F.G. (2014) Dynamic non-linear energy absorbers based on properly stretched in-plane elastomer structures. Nonlinear Dynamics, 75(1), pp. 367-386. ISSN (print) 0924-090X

Arachchige, B., Ghasemnejad, H. and Augousti, A. T. (2016) Theoretical approach to predict transverse impact response of variable-stiffness curved composite plates. Composites Part B Engineering, 89, pp. 34-43. ISSN (print) 1359-8368

Askari, M.R. and Davis, R. (1998) Development and application of computer software for simulation of vibration analysis in education. In: International Conference on Simulation; 30 Sep - 02 Oct 1998, York, UK. ISSN (online) 0537-9989

Ayati, Seyedeh Bentolhoda (2009) Control algorithm for emission tests. (MSc(R) thesis), Kingston University.

Ayten, K. Koray, Sahinkaya, M. Necip and Dumlu, Ahmet (2016) Optimum trajectory generation for redundant/hyper-redundant manipulators. IFAC-PapersOnLine, 49(21), pp. 493-500. ISSN (online) 2405-8963

B

Babahaji Meibodi, Amir (2015) On-site concrete waste minimisation in Iran. (PhD thesis), Kingston University.

Balbis, L and Ordys, A (2005) Hybrid predictive control design for optimal load sharing. In: Methods and models in automation and robotics; 29 Aug - 1 Sept 2005, Miedzyzdroje, Poland. (MMAR - CD-ROM Edition) ISBN 8360140855

Balbis, Luisella, Ordys, Andrzej W., Grimble, Michael J. and Pang, Yan (2007) Tutorial introduction to the modelling and control of hybrid systems. International Journal of Modelling, Identification and Control (IJMIC), 2(4), pp. 259-272. ISSN (print) 1746-6172

Balbis, Luisella, Katebi, Reza and Ordys, Andrzej (2006) Model predictive control design for industrial applications. In: International Control Conference (ICC2006); 28 Aug - 1 Sep 2006, Glasgow, Scotland. (Unpublished)

Balbis, Luisella, Katebi, Reza, Ordys, Andrzej, Dunia, Ricardo and Grimble, Michael J. (2006) Nonlinear predictive control for real time applications. In: IEEE International Symposium on Intelligent Control; 4-6 October 2006, Munich, Germany.

Bao, Y., Zhang, T. and Gawne, D.T. (2005) Influence of composition and process parameters on the thermal spray deposition of UHMWPE coatings. Journal of Materials Science, 40(1), pp. 77-85. ISSN (print) 0022-2461

Bao, Y., Zhang, T. and Gawne, D.T. (2004) Computational model for the prediction of the temperatures in the coating during thermal spray. In: International Thermal Spray Conference; 10-12 May 2004, Osaka, Japan. (Proceedings of the International Thermal Spray Conference) ISBN 0871708094

Bao, Y., Zhang, T. and Gawne, D.T. (1998) Analysis of residual stress generated during plasma spraying of glass coatings. In: 15th International Thermal Spray Conference; 25-29 May 1998, Nice, France. (Proceedings of the 15th International Thermal Spray Conference)

Bao, Y., Zhang, T. and Gawne, D.T. (1998) The mechanism of crack formation in plasma sprayed enamel. Transactions of the Institute of Metal Finishing, 76(6), pp. 213-216. ISSN (print) 0020-2967

Bao, Yuqing, Zhang, Tao and Gawne, David T. (2012) Process modelling of thermal spraying for thermoset coatings. Progress in Organic Coatings, 73(2-3), pp. 225-231. ISSN (print) 0300-9440

Barbosa, Luiz Filipe, Trunins, Jevgenijs, Zweiri, Yahya H., Claus, Malcolm and Kamm, Niklaus (2015) Development and testing of the Mars Rover Mobility Platform for educational and research purposes. IARJSET, 2(10), pp. 99-104. ISSN (print) 2394-1588

Barnes, S., Flower, Ray, Self, A., Mason, P.J. and Newman, T. (2002) Foundation Degree in Aircraft Engineering - a new degree for a new age. Engineering Education 2002: Professional Engineering Scenarios, 1(7336702), 7/1- 7/5.

Bell, M, Cooper, R., Houston, G. and Wang, J (2010) Numerical modelling of acoustic sources. In: RAeS Aerodynamics Conference Applied Aerodynamics: Capabilities and Future Requirements; 27-28 Jul 2010, Bristol, U.K..

Bengherbia, T., Yao, Y. F., Bauer, P. and Knowlen, C. (2011) Numerical study of gaseous reactive flow over a ram accelerator projectile in subdetonative velocity regime. European Physical Journal - Applied Physics (The), 55(1), 11102 -11113. ISSN (print) 1286-0042

Bengherbia, T., Bauer, P., Yao, Y. and Knowlen, C. (2010) One-dimensional performance modelling of the ram accelerator in subdetonative regime. Journal of Aerospace Science, Technologies and Systems, 88(1), pp. 3-13.

Bengherbia, T., Yao, Y., Bauer, P. and Knowlen, C. (2010) Thrust prediction in thermally choked ram accelerator. In: AIAA 48th Aerospace Sciences Meeting; 04-07 Jan 2010, Orlando, FL, USA.

Bengherbia, T. and Bauer, P. (2009) Numerical investigation of thermally choked ram accelerator in sub-detonative regime. In: 47th AIAA Aerospace Sciences Meeting and The New Horizons Forum and Aerospace Exhibit 2009; 5-8 Jan 2009, Orlando, Florida.

Bengherbia, Tarek, Yao, Yufeng, Bauer, Pascal, Giraud, Marc and Knowlen, Carl (2011) Improved one-dimensional unsteady modeling of thermally choked ram accelerator in sub-detonative velocity regime. In: 26th International Symposium on Ballistics; 12-16 Sep 2011, Miami, USA. (Unpublished)

Bengherbia, Tarek, Yao, Yufeng, Bauer, Pascal, Giraud, Marc and Knowlen, Carl (2011) Improved one-dimensional unsteady modelling of thermally choked ram accelerator in sub-detonative velocity regime. Journal Of Applied Mechanics, 78(5), 051004. ISSN (print) 0021-8936

Bengherbia, Tarek, Yao, Yufeng, Bauer, Pascal and Knowlen, Carl (2010) Equations of state for 1-D modelling of ram accelerator thrust in thermally choked propulsion mode. International Journal of Engineering Systems Modelling and Simulations, 2(3), pp. 154-161. ISSN (print) 1755-9758

Benhadj-Djilali, R. and Ouazzane, K. (2003) Binary image coding algorithm using tactile data information. In: International Conference on Imaging Science, Systems and Technology, CSST 03; 23-26 Jun 2003, Las Vegas, USA. (Proceedings of the International Conference on Imaging Science, Systems and Technology, no. 2) ISBN 9781892512475

Benhadj-Djilali, R., Sadeque, S. and Rahnajet, H. (1988) A knowledge based system for sensor interaction for real-time component control. The International Journal of Advanced Manufacturing Technology, 3(1), pp. 77-102. ISSN (print) 0268-3768

Benhadj-Djilali, R., Rahnajet, H. and Safa, M. (1987) High resolution pneumatic proximity tactile sensing device. The International Journal of Advanced Manufacturing Technology, 2(3), pp. 59-72. ISSN (print) 0268-3768

Benhadj-Djilali, Redha (1992) Development of a high resolution pneumatic proximity to tactile sensing device for parts identification. (PhD thesis), Kingston University.

Besseris, George J. (2016) Screening dense and noisy DOX-datasets with NN-blending and "dizzy" swarm intelligence : profiling a water quality process. Swarm and Evolutionary Computation, ISSN (print) 2210-6502 (Epub Ahead of Print)

Bhatia, Dinesh Devraj (2016) Effects of surface features and vibration of flat plate on boundary layer transition. (PhD thesis), Kingston University.

Bhatti, Jawaad, Plummer, Andrew R., Sahinkaya, Necip, Iravani, Pejman, Guglielmino, Emanuele and Caldwell, Darwin G. (2012) Fast and adaptive hopping height control of single-legged robot. In: UNSPECIFIED, (ed.) ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis. American Society of Mechanical Engineers. pp. 303-309. ISBN 9780791844861

Bittar, Adriano, Vitzilaios, Nikolaos I., Rutherford, Matthew J. and Valavanis, Kimon P. (2015) An integrated framework for Cooperative Ground and Aerial Vehicles Missions utilizing Matlab and X-Plane. In: 9th Annual IEEE International Systems Conference (SysCon); 13-16 April 2015, Vancouver, BC, Canada.

Blackman, B.R.K., Hadavinia, H., Kinloch, A. J. and Paraschi, M. (1999) Determining the adhesive fracture energy of bonded joints. In: UNSPECIFIED, (ed.) Adhesion Conference. The Institute of Materials, Minerals and Mining. pp. 425-430. (In Press)

Bostanci, Sevket Can (2015) Low carbon sustainable concrete design and construction. (PhD thesis), Kingston University.

Boyle, Mark, Gault, Richard, Cooper, Richard and Wang, Jian (2008) Modelling correlated and uncorrelated sound sources. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Boyle, Mark, Cassidy, Matthew, Cooper, Richard, Gault, Richard and Wang, Jian (2007) An investigation into the relationship between sound intensity and normal surface velocity. Journal of the Acoustical Society of America, 121(5), p. 3155. ISSN (print) 0001-4966

Brandon, P., Patel, A., Karwatzki, J. and Ordys, A. (2007) Adaptive Damper Modelling and Experimentation. In: 3rd Institution of Engineering and Technology Conference on Automotive Electronics; 28-29 June 2007, Warwick, U.K.. ISBN 9780863418150

Brandon, P.E. and White, N (2007) Quantification of the combined damping characteristics of damper and top mount systems, to aid the optimisation of ride performance for road vehicles. (Technical Report) USA : Society of Automotive Enginners International. (SAE Technical Paper)

Breidi, Salah Eddine (2014) Development of methods to determine analytes in a variety of matrices with applications to forensic science. (PhD thesis), Kingston University.

Bulat, P.V., Ilyina, T.E., Volkov, K.N., Silnikov, M.V. and Chernyshov, M.V. (2016) Interaction of a shock wave with an array of particles and effect of particles on the shock wave weakening. Acta Astronautica, ISSN (print) 0094-5765 (Epub Ahead of Print)

Bulbut, B, Shawky, A, Grimble, M.J. and Ordys, A.W. (2002) Application of efficient nonlinear predictive control to a flexible manipulator system. In: Methods and models in automation and robotics; 2-5 Sept 2002, Szczecin, Poland. (Proceedings of the International Symposium on Methods and Models in Automation And Robotics, no. 2) ISBN 8388764519

Bulbut, B, Ordys, A.W. and Grimble, M.J. (2002) Application of efficient nonlinear predictive control to a hot strip finishing mill. In: International conference on control applications; 18-20 Sept 2002, Glasgow, Scotland. (Proceedings of the IEEE International Conference on Control Applications) ISSN (print) 1085-1992 ISBN 0780373863

Bulbut, B, Uduehi, D, Ordys, A.W. and Grimble, M.J. (2001) Application of process control loop benchmarking to an oil production platform. In: American Control Conference; June 25-27 2001, Arlington, USA. (Proceedings of the American Control Conference) ISSN (print) 0743-1619

Burrows, C. R., Keogh, P. S. and Sahinkaya, M. N. (2009) Progress towards smart rotating machinery through the use of active bearings. Journal Of Mechanical Engineering Science - Part C, 223(12), pp. 2849-2860. ISSN (print) 0954-4062

Burrows, C. R., Kucuk, N. C., Sahinkaya, M. N. and Stanway, R. (1990) Linearized squeeze-film dynamics: model structure and the interpretation of experimentally derived parameters. Journal Of Mechanical Engineering Science - Part C, 204(4), pp. 263-272. ISSN (print) 0954-4062

Burrows, C. R., Sahinkaya, M. N. and Clements, S. (1989) Active vibration control of flexible rotors: an experimental and theoretical study. Proceedings A. Mathematical, Physical and Engineering Sciences, 422(1862), pp. 123-146. ISSN (print) 1364-5021

Burrows, C. R., Sahinkaya, M. N. and Clements, S. (1988) Electromagnetic control of oil-film supported rotors using sparse measurements. Journal of Vibration, Acoustics, Stress and Reliability in Design, 110(3), pp. 295-299. ISSN (print) 0739-3717

Burrows, C. R., Sahinkaya, M. N., Kucuk, N. C. and Tong, M. L. (1988) In situ estimation of the dynamic characteristics of an uncavitated squeeze-film damper. Journal Of Tribology, 110(1), pp. 162-166. ISSN (print) 0742-4787

Burrows, C. R., Sahinkaya, M. N. and Kucuk, N. C. (1987) A new model to predict the behaviour of cavitated squeeze-film bearings. Proceedings A. Mathematical, Physical and Engineering Sciences, 411(1841), pp. 445-466. ISSN (print) 1364-5021

Burrows, C. R. and Sahinkaya, M. N. (1982) Parameter estimation of multi-mode rotor-bearing systems. Proceedings A. Mathematical, Physical and Engineering Sciences, 379(1777), pp. 367-387. ISSN (print) 1364-5021

Burrows, C. R. and Sahinkaya, M. N. (1983) Vibration control of multi-mode rotor-bearing systems. Proceedings A. Mathematical, Physical and Engineering Sciences, 386(1790), pp. 77-94. ISSN (print) 1364-5021

Burrows, C.R., Sahinkaya, M.N., Kucuk, N.C. and Tong, M.L. (1988) Comparison of algorithms for in situ estimation of squeeze-film bearing characteristics. Journal Of Tribology, 110(2), pp. 382-385. ISSN (print) 0742-4787

Burrows, C.R., Sahinkaya, M.N. and Kucuk, N.C. (1986) Modeling of oil-film forces in squeeze-film bearings. Journal Of Tribology, 108(2), pp. 262-269. ISSN (print) 0742-4787

Burrows, C.R. and Sahinkaya, M.N. (1985) Assessment of techniques for estimating oil-film bearing coefficients. Tribology International, 18(5), pp. 267-274. ISSN (print) 0301-679X

Burrows, C.R., Sahinkaya, M.N. and Turkay, O.S. (1984) An adaptive squeeze-film bearing. Journal Of Tribology, 106(1), pp. 145-151. ISSN (print) 0742-4787

Burrows, C.R., Sahinkaya, M.N. and Turkay, O.S. (1984) An adaptive squeeze-film bearing. Journal Of Tribology, 106(1), pp. 145-151. ISSN (print) 0742-4787

Burrows, C.R. and Sahinkaya, M.N. (1983) A modified algorithm for determining structural controllability. International Journal of Control, 37(6), pp. 1417-1431. ISSN (print) 0020-7179

Burrows, C.R. and Sahinkaya, M.N. (1982) Frequency-domain estimation of linearized oil-film coefficients. Journal of Lubrication Technology, 104(2), pp. 210-215. ISSN (print) 0022-2305

Burrows, C.R. and Sahinkaya, M.N. (1981) A new algorithm for determining structural controllability. International Journal of Control, 33(2), pp. 379-392. ISSN (print) 0020-7179

Bwalya, A.C., Sabir, H.M. and Raine, M. (2001) Induced annular water film evaporator for air to refrigerant heat exchange enhancement in a Lithium Bromide - Water absorption refrigeration system. In: 2nd International Heat Powered Cycles Conference; 5 - 7 Sept 2001, Paris, France.

C

Cade, Iain S., Sahinkaya, M. Necip, Burrows, Clifford R. and Keogh, Patrick S. (2010) An active auxiliary bearing control strategy to reduce the onset of asynchronous periodic contact modes in rotor/magnetic bearing systems. Journal of Engineering for Gas Turbines and Power, 132(5),

Cade, Iain S., Sahinkaya, M. Necip, Burrows, Clifford R. and Keogh, Patrick S. (2009) On the use of actively controlled auxiliary bearings in magnetic bearing systems. Journal Of Engineering For Gas Turbines And Power, 131(2), 022507. ISSN (print) 0742-4795

Cade, Iain S., Keogh, Patrick S. and Sahinkaya, M. Necip (2007) Rotor/active magnetic bearing transient control using wavelet predictive moderation. Journal of Sound and Vibration, 302(1-2), pp. 88-103.

Cade, Iain S., Keogh, Patrick S., Sahinkaya, M. Necip and Burrows, Clifford R. (2007) Wavelet coefficient characteristics during rotor/auxiliary bearing contact in active magnetic bearing systems. In: UNSPECIFIED, (ed.) ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. New York, U.S.A. : American Society of Mechanical Engineers. pp. 1327-1334. ISBN 0791848027

Cade, Iain S., Keogh, Patrick S. and Sahinkaya, M. Necip (2006) Transient rotor/active magnetic bearing control using sampled wavelet coefficients. Journal Of Engineering For Gas Turbines And Power, 129(2), pp. 549-555. ISSN (print) 0742-4795

Cade, Iain S., Keogh, Patrick S. and Sahinkaya, M. Necip (2006) Transient rotor/active magnetic bearing control using sampled wavelet coefficients. Journal of Engineering for Gas Turbines and Power, 129(2), 549- 555. ISSN (print) 0742-4795

Cade, Iain S., Keogh, Patrick .S. and Sahinkaya, M.Necip (2005) Fault identification in rotor/magnetic bearing systems using discrete time wavelet coefficients. IEEE/ASME Transactions on Mechatronics, 10(6), pp. 648-657. ISSN (print) 1083-4435

Cade, Lain S., Sahinkaya, M. Necip, Burrows, Clifford R. and Keogh, Patrick S. (2010) Destabilization of forward rub in rotor magnetic bearing systems using actively controlled auxiliary bearings. In: UNSPECIFIED, (ed.) ASME Turbo Expo 2010: Power for Land, Sea, and Air. New York, U.S.A. : American Society of Mechanical Engineers. pp. 273-282. ISBN 9780791844014

Campbell, I., Uduehi, D., Ordys, A. and Van der Molen, G. (2001) pH level process control system benchmarking. In: American Control Conference; 25-27 June 2001, Arlington, USA. (Proceedings of the 2001 American Control Conference, no. 6)

Cassidy, Matthew, Gault, Richard, Cooper, Richard and Wang, Jian (2008) Design for sound transmission loss through an enclosure of a generator set. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Cassidy, Matthew, Cooper, Richard, Gault, Richard and Wang, Jian (2008) Evaluation of standards for transmission loss tests. Journal of the Acoustical Society of America, 123(5), p. 3190. ISSN (print) 0001-4966

Castagna, J., Yao, Y. and Yao, J. (2012) Numerical simulation of a turbulenct flow over an axisymmetric hill. In: 50th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition 2012; 9-10 Jan 2012, Nashville, Tennessee.

Castagna, Jony and Yao, Yufeng (2010) Development of a multi-block high-order DNS code for turbulent flow simulations. IOP Conference Series: Materials Science and Engineering, 10(012027), ISSN (print) 1757-8981

Castagna, Jony and Yao, Yufeng (2010) Development of a multi-block high-order DNS code for turbulent flow simulations. In: 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics; 19-23 Jul 2009, Sydney, Australia. (Unpublished)

Castagna, Jony, Yao, Yufeng and Yao, Jun (2009) DNS of turbulent flow around an axisymmetric hill. In: 50th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition 2012; 9-10 Jan 2012, Nashville, Tennessee.

Castagna, Jony and Yao, Yufeng (2007) DNS of turbulent flow over longitudinally ridged walls. In: 60th Annual Meeting of the Divison of Fluid Dynamics; 18-20 Nov 2007, Salt Lake City, Utah, U.S.A..

Cazan, A, Gohar, R and Safa, M M A (2002) Externally pressurised gas bearings in a mixed configuration. Proceeding of the Institute of Mechanical Engineering, Part K, Journal of Multibody Dynamics, 216(2), pp. 181-189. ISSN (print) 1464-4193

Cazan, A., Gohar, R. and Safa, M.M.A. (2002) Externally pressurized gas bearings in a mixed configuration. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 216(2), pp. 181-189. ISSN (print) 1464-4193

Cazan, A., Safa, M. and Gohar, R. (2000) High-stability externally pressurized gas bearing. In: 16th National Conference on Manufacturing Research; 5-7 Sept 2000, London, UK. (Advances in Manufacturing Technology, no. 14) ISBN 9781860582677

Cazan, Adrian Mirel (2002) Reduction of whirl instability in externally pressurised gas journal bearings. (PhD thesis), Kingston University.

Chan, K Y, Ordys, A. and Duran, O (2010) A system to measure gap distance between two vehicles using license plate character height. In: Bolc, Leonard , Tadeusiewicz, Ryszard , Chmielewski, Leszek J. and Wojciechowski, Konrad, (eds.) Computer Vision and Graphics: International Conference, ICCVG 2010 Warsaw, Poland, September 2010 Proceedings, Part 1. Berlin, Germany : Springer. pp. 249-256. (Lecture Notes in Computer Science, no. 6374) ISSN (print) 0302-9743 ISBN 9783642159091

Chan, Kin Yip, Ordys, Andrzej, Volkov, Konstantin and Duran, Olga (2013) Comparison of engine simulation software for development of control system. Modelling and Simulation in Engineering, 2013(401643), ISSN (print) 1687-5591

Chan, KinYip (2014) Control algorithms for optimisation of engine combustion process with continuously changing fuel composition. (PhD thesis), Kingston University.

Chang, N., Yang, W., Wang, J. and Wang, W. (2010) Design optimization of composite wing box for flutter and stiffness. In: 48th AIAA Aerospace Sciences Meeting, Including the New Horizons Forum and Aerospace Exposition; 4 - 7 Jan 2010, Orlando, Florida, U.S.. (Unpublished)

Chang, N., Wang, W., Yang, W. and Wang, J. (2010) Ply stacking sequence optimization of composite laminate by permutation discrete particle swarm optimization. Structural and Multidisciplinary Optimization, 41(2), pp. 179-187. ISSN (print) 1615-147X

Chau, M., Hoffmann, Joerg, Blundell, M.V., Ordys, A. and Hadavinia, H. (2010) Effect of side-wall reinforcement on energy absorption of thin-wall cylindrical damper. Key Engineering Materials, 417-18, pp. 785-788. ISSN (print) 1013-9826

Chau, M., Hoffmann, J., Blundell, M.V., Ordys, A. and Hadavinia, H. (2009) Effect of side-wall reinforcement on energy absorption of thin-wall cylindrical damper. In: 8th International Conference on Fracture and Damage Mechanics; 8-10 Sep 2009, Malta. (Key Engineering Materials, no. 417-418)

Chen, Jian, Li, Yan and Wang, Jian (2008) Simultaneous optimization of fuel consumption and emissions for a parallel hybrid electric SUV using fuzzy logic control. International Journal of Vehicle Design, 46(2), pp. 204-218. ISSN (print) 0143-3369

Chen, Jian, Wang, Jian and Muckian, Gerard (2008) Sound transmission loss of movable double-leaf partition wall. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Chen, Z.B., Wen, J.X., Xu, B.P. and Dembele, S. (2011) The extension of the eddy dissipation concept (EDC) to the LES framework in FireFOAM. In: FM Global Open Source CFD Fire Modeling Workshop; 9-10 May 2011, Norwood, USA. (Unpublished)

Chen, Z.B., Dembele, S., Wen, J.X. and Tam, V.H.Y. (2009) Towards large eddy simulation of LNG pool fires. In: 21st Institution of Chemical Engineers Symposium on Hazards 2009: Hazards XXI: Process Safety and Environmental Protection; 10 -12 November 2009, Manchester, England. ISSN (print) 0307-0492

Chen, Zezhi and Wallace, Andrew M. (2007) Improved Object Tracking Using an Adaptive Colour Model. In: Yuille, Alan L. , Song-Chun, Zhu , Cremers, Daniel and Wang, Yongtian, (eds.) Energy Minimization Methods in Computer Vision and Pattern Recognition. Springer Berlin Heidelberg. pp. 280-294. (Lecture Notes in Computer Science, no. 4679) ISBN 9783540741954

Chen, Zhibin (2012) Extension of the eddy dissipation concept and laminar smoke point soot model to the large eddy simulation of fire dynamics. (PhD thesis), Kingston University.

Chen, Zhibin, Wen, Jennifer, Xu, Baopeng and Dembele, Siaka (2011) Large eddy simulation of fire dynamics with the improved eddy dissipation concept. In: 10th International IAFSS Symposium; 19-24 June 2011, Maryland, USA. (Unpublished)

Chhaniyara, S., Bunnun, P., Zweiri, Y.H., Seneviratne, L.D. and Althoefer, K. (2006) Feasibility of velocity estimation for all terrian ground vehicles using an optical flow algorithm. In: 3rd International Conference on Autonomous Robots and Agents; 12-14 Dec 2006, Palmerston North, New Zealand.

Chhaniyara, Savan, Althoefer, Kaspar, Zweiri, Yahya H. and Seneviratne, Lakmal D. (2007) A novel approach for self-localization based on computer vision and artificial marker deposition. In: International Conference on Networking, Sensing and Control; 15 - 17 Apr 2007, London, U. K.. (International Conference on Networking, Sensing and Control, no. 2007) ISBN 1424410762

Chhaniyara, Savan Bhagvanji [Inventor], Zweiri, Yahya Hashem [Inventor], Althoefer, Kaspar Alexander [Inventor] and Seneviratne, Lakmal Dasarath [Inventor] (2006) Kings College London Vehicle Location. WO2006/087542.

ChooPar, Tan, Zweiri, Yahya H., Althoefer, Kaspar and Seneviratne, Lakmal D. (2005) Online soil-bucket interaction identification for autonomous excavation. In: International Conference on Robotics and Automation (ICRA); 18 - 22 Apr 2005, Barcelona, Spain. (Proceedings of the International Conference on Robotics and Automation, no. 2005) ISBN 078038914X

Choopar, Tan, Zweiri, Yahya H., Althoefer, Kaspar and Seneviratne, Lakmal D. (2004) Hybrid model in a real-time soil parameter identification scheme for autonomous excavation. In: International Conference on Robotics and Automation (ICRA); 26 Apr - 1 May 2004, New Orleans, USA. (Proceedings of the International Conference on Robotics and Automation, no. 2004) ISBN 0780382323

Ciuraru, C. and Ghasemnejad, H. (2012) Analysis of the wind energy sector in Romania. In: International Symposium on Environment Friendly Energies and Applications (EFEA 2012); 25-27 June 2012, Newcastle, UK.

Claus, Malcolm (2001) Jet interaction effects on a hypersonic interceptor. (PhD thesis), Kingston University.

Cockell, C.S. and Ellery, A.A. (2003) The human exploration of the Martian pole part 1 - Four phases from early expedition to a permanent station. Journal of the British Interplanetary Society, 56(1-2), pp. 33-42. ISSN (print) 0007-084X

Cole, M. O. T., Keogh, P. S., Burrows, C. R. and Sahinkaya, M. N. (2006) Adaptive control of rotor vibration using compact wavelets. Journal Of Vibration And Acoustics, 128(5), pp. 653-665. ISSN (print) 1048-9002

Cole, M. O. T., Keogh, P. S., Burrows, C. R. and Sahinkaya, M. Necip (2006) Wavelet domain control of rotor vibration. Journal Of Mechanical Engineering Science - Part C, 220(2), pp. 167-184. ISSN (print) 0954-4062

Cole, Matthew O.T., Keogh, Patrick S., Sahinkaya, Mehmet N. and Burrows, Clifford R. (2004) Towards fault-tolerant active control of rotor-magnetic bearing systems. Control Engineering Practice, 12(4), pp. 491-501. ISSN (print) 0967-0661

Conyers, Stephen A., Vitzilaios, Nikolaos I., Rutherford, Matthew J. and Valavanis, Kimon P. (2015) A mobile self-leveling landing platform for VTOL UAVs. In: 2015 IEEE International Conference on Robotics and Automation (ICRA); 26-30 May 2015, Seattle, WA, U.S.A.. ISSN (print) 1050-4729

Curley, AJ, Hadavinia, H, Kinloch, AJ and Taylor, AC (2000) Predicting the service-life of adhesively-bonded joints. International Journal of Fracture, 103(1), pp. 41-69. ISSN (print) 0376-9429

Curley, AJ, Williams, KJ, Le, T and Patel, H (1999) The cyclic fatigue behaviour of ball grid arrays. Microelectronics International, 16(3), pp. 43-45. ISSN (online) 1356-5362

Curley, AJ, Jethwa, JK, Kinloch, AJ and Taylor, AC (1998) The fatigue and durability behaviour of automotive adhesives part III: predicting the service life. Journal of Adhesion, 66(1-4), pp. 39-59. ISSN (print) 0021-8464

Curran, R., Gilmour, M., McAlleenan, C., Price, M., Kelly, P. and Wang, J. (2007) Development of a cost management system for evolving product definition. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Czechowski, Piotr and Ordys, Andrzej (2006) Testing RapidMVC - A real-time predictive control package for fast systems. In: International Control Conference (ICC2006); 30 Aug - 1 Sept 2006, Glasgow, Scotland. ISBN 0947649549

D

Davar, A., Khalili, S.M.R. and Hadavinia, H. (2013) Free vibrations of functionally graded circular cylindrical shells under internal pressure. International Journal of Advanced Design and Manufacturing Technology, 6(4), pp. 49-58. ISSN (print) 2252-0406

David-West, O. S., Wang, J and Cooper, R. (2011) Model updating of an enclosure using imaginary elements. In: EMex 2011, the BSSM’s annual Exhibition of Experimental Mechanics; 7-9 September 2011, Edinburgh, UK.. (Submitted)

David-West, O. S., Wang, J. and Cooper, R. (2011) Model updating of an enclosure using imaginary elements. Applied Mechanics and Materials, 70, pp. 309-314. ISSN (print) 1662-7482

David-West, O. S., Wang, J. and Cooper, R. (2011) Model updating of an enclosure using imaginary elements. In: 8th International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation for Validation; 7-9 Sep 2011, Edinburgh, Scotland. (Unpublished)

David-West, O. S., Banks, W. M. and Pethrick, R. A. (2011) A study of the effect of strain rate and temperature on the characteristics of quasi-unidirectional natural fibre-reinforced composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 225(L3), pp. 133-148. ISSN (print) 1464-4207

David-West, O. S., Wang, J. and Cooper, R. (2010) Finite element model updating of a thin wall enclosure under impact excitation. Applied Mechanics and Materials, 24-25, pp. 337-342. ISSN (print) 1660-9336

Davies, M., Zoras, S. and Adjali, M.H. (2000) Development and inter-model comparative testing of a novel earth-contact heat-transfer simulation method. Building Services Engineering Research and Technology, 21(1), pp. 19-25. ISSN (print) 0143-6244

Davies, Michael, Zoras, Stamatis and Adjali, Hicham (1999) A potentially fast, flexible, and accurate earth-contact heat-transfer simulation method. In: Building Simulation; 13 - 15 Sept 1999, Kyoto, Japan.

Dembele, S, Wen, JX and Sacadura, JF (2000) Analysis of the two-flux model for predicting water spray transmittance in fire protection application. Journal Of Heat Transfer, 122(1), pp. 183-186. ISSN (print) 0022-1481

Dembele, S and Wen, J.X. (2000) Investigation of a spectral formulation for radiative heat transfer in one-dimensional fires and combustion systems. International Journal of Heat and Mass Transfer, 43(21), pp. 4019-4030. ISSN (print) 0017-9310

Dembele, S, Delmas, A and Sacadura, JF (1996) Shielding fire thermal radiation by water spray curtains: some improvements in radiative transfer modelling. In: Industrial Fires III Proceedings; 17-18 Sep 1996, Roskilde, Denmark. (EUR 17477) ISBN 8755022871

Dembele, S., Rosario, R.A.F., Wang, Q.S., Warren, P.D. and Wen, J.X. (2010) Thermal and stress analysis of glazing in fires and glass fracture modeling with a probabilistic approach. Numerical Heat Transfer Part B, 58(6), pp. 419-439. ISSN (print) 1040-7790

Dembele, S., Rosario, R.A.F., Wen, J., Warren, P.D. and Dale, S. (2008) Numerical study of glazing behaviour in fire conditions. In: 3rd International Symposium on The 21st Century Center of Excellence Program; 10-11 March 2008, Tokyo, Japan.

Dembele, S., Rosario, R., Wen, J., Warren, P. and Dale, S. (2008) Simulation of glazing behavior in fires using computational fluids dynamics and spectral radiation modeling. In: 9th International Fire Safety Science Symposium; September 2005, Beijing, China. (Fire Safety Science, no. 9)

Dembele, S., Tam, V.H.Y., Ferraris, S., Rosario, A.F. and Wen, J.X. (2007) Effectiveness of water deluge in fire suppression and mitigation. In: 12th International Symposium on Loss Prevention and Safety Promotion in the Process Industries; 22-24 May 2007, Edinburgh, Scotland. (Institution of Chemical Engineers Symposium Series, no. 153) ISBN 9780852955086

Dembele, S., Zhang, J. and Wen, J. (2007) Exploratory study of underexpanded sonic hydrogen jets. In: 5th International Seminar on Fire and Explosion Hazards; 23-27 Apr 2007, Edinburgh, UK. (Proceedings of the 5th International Seminar on Fire and Explosion Hazards)

Dembele, S. and Wen, J.X. (2000) Predicting the mass burning rates of liquid pool fires using CFD techniques. International Symposium on Combustion, Abstracts of Accepted Papers, B, p. 67. ISSN (print) 1540-7489

Dembele, Siaka, Rosario, Ricardo, Wen, Jennifer, Warren, Paul and Dale, Stuart (2008) Simulation of glazing behavior in fires using computational fluids dynamics and spectral radiation modeling. In: 9th International IAFSS Symposium; 21-26 Sept 2008, Karlsruhe, Germany.

Deng, J., Bastian, M. and Stobart, R.K. (2012) Particulate matter prediction of both steady state and transient operation in diesel engines. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 226(2), pp. 260-274. ISSN (print) 0954-4070

Deng, Jiamei (2013) Dynamic neural networks with hybrid structures for nonlinear system identification. Engineering Applications of Artificial Intelligence, 26(1), pp. 281-292. ISSN (print) 0952-1976

Deng, Jiamei, Maass, B. and Stobart, R. (2012) Minimum data requirement for neural networks based on power spectral density analysis. IEEE Transactions on Neural Networks and Learning Systems, 23(4), pp. 587-595. ISSN (print) 2162-237X

Deng, Jiamei, Maass, Bastian, Stobart, Richard, Winward, Edward and Yang, Zhijia (2011) Accurate and continuous fuel flow rate measurement prediction for real time application. SAE International Journal of Engines, 4(1), pp. 1724-1737. ISSN (print) 1946-3936

Deng, Jiamei, Becerra, Victor M. and Stobart, Richard (2009) Input constraint handling in a MPC/Feedback linearization scheme. International Journal of Applied Mathematics and Computer Science, 19(2), pp. 219-232. ISSN (print) 1641-876X

Dinkelacker, F., Manickam, B. and Muppala, S.P.R. (2011) Modelling and simulation of lean premixed turbulent methane/hydrogen/air flames with an effective Lewis number approach. Combustion and Flame, 158(9), pp. 1742-1749. ISSN (print) 0010-2180

Dogan, Faith, Barton, Stephen, Hadavinia, Homayoun, Mason, Peter and Foot, Peter J. S. (2012) Experimental studies on conducting polyaniline. Recent Patents on Materials Science, 5(3), pp. 241-255. ISSN (print) 1874-4648

Dogan, Faith, Hadavinia, Homayoun, Barton, Stephen J and Mason, Peter J. (2010) Applications of intrinsically conducting polymers. Recent Patents on Mechanical Engineering, 3(3), pp. 174-182. ISSN (print) 2212-7976

Dogan, Fatih, Hadavinia, Homayoun, Donchev, Todor and Bhonge, Prasannakumar S. (2012) Delamination of impacted composite structures by cohesive zone interface elements and tiebreak contact. Central European Journal of Engineering, 2(4), pp. 612-626. ISSN (print) 1896-1541

Dombrovskiy, Leonid A., Dembele, Siaka and Wen, Jennifer X. (2016) Shielding of fire radiation with the use of multi-layered water mist curtains : preliminary estimates. Computational Thermal Sciences, 8(4), pp. 371-380. ISSN (print) 1940-2503

Dombrovskiy, Leonid A., Dembele, Siaka and Wen, Jennifer X. (2016) Shielding of fire radiation with the use of multi-layered water mist curtains : preliminary estimates. In: 8th International Symposium on Radiative Transfer RAD-16; 06 - 10 Jun 2016, Cappadocia, Turkey. (Unpublished)

Dombrovsky, Leonid A., Dembele, Siaka and Wen, Jennifer (2016) A simplified model for the shielding of fire thermal radiation by water mists. International Journal of Heat and Mass Transfer, 96, pp. 199-209. ISSN (print) 0017-9310

Domun, Nadiim, Hadavinia, H., Zhang, T., Sainsbury, T., Liaghat, G.H. and Vahid, S. (2015) Improving the fracture toughness and the strength of epoxy using nanomaterials : a review of the current status. Nanoscale, 7(23), pp. 10294-10329. ISSN (print) 2040-3364

Drew, B., Plummer, A. R. and Sahinkaya, M. N. (2009) A review of wave energy converter technology. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 223(8), pp. 887-902. ISSN (online) 2041-2967

Duc, Nguyen Dinh, Hadavinia, Homayoun, Thu, Pham Van and Quan, Tran Quoc (2015) Vibration and nonlinear dynamic response of imperfect three-phase polymer nanocomposite panel resting on elastic foundations under hydrodynamic loads. Composite Structures, 131, pp. 229-237. ISSN (print) 0263-8223

Duddempudi, Deepthi, Yao, Yufeng, Edmondson, David, Yao, Jun and Curley, Andy (2007) Computational study of flow over generic fan-wing airfoil. Aircraft Engineering & Aerospace Technology, 79(3), pp. 238-244. ISSN (print) 1748-8842

Duran, O, Althoefer, K and Seneviratne, L.D. (2007) Automated pipe defect detection and categorization using camera/laser-based profiler and artificial neural network. IEEE Transactions on Automation, Science and Engineering, 4(1), pp. 118-126. ISSN (print) 1545-5955

Duran, O., Onasoglou, E. and Petrou, M. (2009) Fusion of Kalman filter and anomaly detection for multispectral and hyperspectral target tracking. In: IEEE International Geoscience and Remote Sensing Symposium; 12 - 17 July 2009, Cape Town, South Africa. ISBN 9781424433940

Duran, O. and Petrou, M. (2009) Robust endmember extraction in the presence of anomalies. In: IEEE International Geoscience and Remote Sensing Symposium; 12 - 17 July 2009, Cape Town, South Africa. ISBN 9781424433940

Duran, O. and Petrou, M. (2009) Spectral unmixing with negative and superunity abundances for subpixel anomaly detection. IEEE Geoscience and Remote Sensing Letters, 6(1), 152 -156. ISSN (print) 1558-0571

Duran, O. and Petrou, M. (2007) A time-efficient method for anomaly detection in hyperspectral images. IEEE Transactions on Geoscience and Remote Sensing, 45(12), pp. 3894-3904. ISSN (print) 0196-2892

Duran, O., Althoefer, K. and Seneviratne, L.D. (2003) Pipe inspection using a laser-based transducer and automated analysis techniques. IEEE/ASME Transactions on Mechatronics, 8(3), 401 -409. ISSN (print) 1083-4435

Duran, O., Althoefer, K. and Seneviratne, L.D. (2002) State of the art in sensor technologies for sewer inspection. IEEE Sensors Journal, 2(2), pp. 73-81. ISSN (print) 1530-437X

Duran, Olga and Petrou, Maria (2014) Subpixel temporal spectral imaging. Pattern Recognition Letters, 48, pp. 15-23. ISSN (print) 0167-8655

Duran, Olga (2012) Multi sensor platforms for sewer inspection. Water and Sewerage Journal, 3, p. 17.

Duran, Olga and Petrou, Maria (2011) Robust endmember extraction in the presence of anomalies. IEEE Transactions on Geoscience and Remote Sensing, 49(6), pp. 1986-1996. ISSN (print) 0196-2892

Duran, Olga and Petrou, Maria (2007) Anomaly detection using spectral unmixing with negative and superunity abundance weights. In: IEEE International Geoscience and Remote Sensing Symposium (IGARSS07); 23-28 Jul 2007, Barcelona, Spain.

Duran, Olga (2004) Automated laser and pipe inspection. (PhD thesis), Kings's College, London.

Dutka, A.S., Ordys, A.W. and Grimble, M.J. (2005) Optimized discrete-time state dependent Riccati equation regulator. In: American Control Conference; 8-10 June 2005, Portland, USA. (Proceedings of the American Control Conference, no. 4) ISSN (print) 0743-1619 ISBN 0780390989

Dutka, Arkadiuz S., Ordys, Andrzej W. and Grimble, Michael John (2003) Non-linear predictive control of 2 dof helicopter model. In: 42nd IEEE Conference on Decisions and Control; 9-12 Dec 2003, Maui, USA. ISSN (online) 0191-2216 ISBN 0780379241

E

Eames, IW and Sabir, HM (1997) Potential benefits of electrohydrodynamic enhancement of two-phase heat transfer in the design of refrigeration systems. APPLIED THERMAL ENGINEERING, 17(1), pp. 79-92. ISSN (print) 1359-4311

Eames, IW, Marr, NJ and Sabir, HM (1997) The evaporation coefficient of water. International Journal of Heat and Mass Transfer, 40(12), pp. 2963-2973. ISSN (print) 0017-9310

Early, J., Wang, J., Curran, R., Price, M. and Raghunathan, S. (2007) Dynamic feedback models for whole life cost prediction. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Edelmann, C.A., Roberts, G.T., Krishnan, L., Sandham, N.D. and Yao, Y. (2007) The influence of wall temperature on shock-induced separation. In: Hannemann, Klaus and Seiler, Friedrich, (eds.) Shock Waves. Springer Berlin Heidelberg. pp. 1303-1308. ISBN 9783540851806

Effendy, M., Yao, Y.F., Yao, J. and Marchant, D.R. (2016) DES study of blade trailing edge cutback cooling performance with various lip thicknesses. Applied Thermal Engineering, 99, pp. 434-445. ISSN (print) 1359-4311

Effendy, Marwan (2014) Investigation of turbine blade trailing edge cooling and thermal mixing characteristics. (PhD thesis), Kingston University.

El-Sayed, M. A., Hassanin, Hany and Essa, Khamis (2016) Bifilm defects and porosity in Al cast alloys. The International Journal of Advanced Manufacturing Technology, ISSN (print) 0268-3768 (In Press)

El-Sayed, M. A., Hassanin, Hany and Essa, Khamis (2015) Effect of casting practice on the reliability of Al cast alloys. International Journal of Cast Metals Research, The, ISSN (print) 1364-0461 (In Press)

Elfituri, Ahmed A. (2014) Optimisation of resources deployment in a call centre by using stochastic data in simulation models. (PhD thesis), Kingston University.

Ellery, A., Barnes, D., Buckland, R., Welch, C., Garry, J., Zarnecki, J., Gebbie, J., Green, A., Smith, M., Hall, D., McInnes, C., Winfield, A., Nehmzow, U. and Ball, A. (2003) The UK space and planetary robotics network. Journal of the British Interplanetary Society, 56(9-10), pp. 328-337. ISSN (print) 0007-084X

Ellery, A., Richter, L., Parnell, J. and Baker, A. (2003) A low-cost approach to the exploration of Mars through a robotic technology demonstrator mission. In: 5th IAA International Conference on Low-Cost Planetary Missions; 24-26 September 2003, Noordwijk, Netherlands. (Proceedings of the fifth IAA international conference on low-cost planetary missions) ISBN 9290928530

Ellery, A.A. and Cockell, C.S. (2003) The human exploration of the Martian pole part 2 - Support technologies. Journal of the British Interplanetary Society, 56(1-2), pp. 43-55. ISSN (print) 0007-084X

Ellery, Alex, Richter, Lutz, Parnell, John and Baker, Adam (2006) A low-cost approach to the exploration of Mars through a robotic technology demonstrator mission. Acta Astronautica, 59(8-11), pp. 742-749. ISSN (print) 0094-5765

Ellery, Alex, Ball, Andrew J, Cockell, Charles, Dickensheets, David, Edwards, Howell, Kolb, Christof, Lammer, Helmut, Patel, Manish and Richter, Lutz (2005) Vanguard: a European robotic astrobiology-focussed Mars sub-surface mission proposal. Acta Astronautica, 56(3), pp. 397-407. ISSN (print) 0094-5765

Ellery, Alex and Wynn-Williams, David (2003) Why Raman spectroscopy on Mars? : a case of the right tool for the right job. Astrobiology, 3(3), pp. 565-579. ISSN (print) 1531-1074

Elmarakbi, Ahmed, Fielding, Niki and Hadavinia, Homayoun (2011) Finite element simulation of axial crush of thin-walled tubes with different cross-sections: vehicle/pole impact applications. International Journal of Vehicle Structures and Systems, 3(3), ISSN (print) 0975-3060

Emelyanov, V.N., Karpenko, A.G., Kozelkov, A.S., Teterina, I.V., Volkov, K.N. and Yalozo, A.V. (2016) Analysis of impact of general-purpose graphics processor units in supersonic flow modeling. Acta Astronautica, ISSN (print) 0094-5765 (Epub Ahead of Print)

Emelyanov, V.N., Teterina, I.V., Volkov, K.N. and Garkushev, A.U. (2016) Pressure oscillations and instability of working processes in the combustion chambers of solid rocket motors. Acta Astronautica, ISSN (print) 0094-5765 (Epub Ahead of Print)

Essa, Khamis, Khan, Raja, Hassanin, Hany, Attallah, Moataz M. and Reed, Roger (2015) An iterative approach of hot isostatic pressing tooling design for net-shape IN718 superalloy parts. The International Journal of Advanced Manufacturing Technology, ISSN (print) 0268-3768 (Epub Ahead of Print)

Evangelou, LD, Self, A and Allen, J (2000) The F-16 departure phenomena. Aircraft Engineering and Aerospace Technology, 72(2), pp. 102-108. ISSN (print) 1748-8842

Evangelou, Leonidas (2000) Identification of the F-16 in flight handling qualities at high angles of attack using a total systems simulation approach. (MPhil thesis), Kingston University.

F

Fern, A., Mason-Jones, A., Pham, D. T. and Wang, J. (1999) Design and Performance Predictability of Valve Stem Seals Using FEA. (Technical Report) Warrendale, PA., U.S. : SAE International. (SAE Technical Paper 1999-01-0883)

Ferraris, S., Wen, J.X. and Dembele, S. (2005) Large-eddy simulation of a large-scale methane pool fire. Fire Safety Science, 8, pp. 963-974.

Foot, Peter J.S. (2015) Principles and prospects of high-energy magnesium-ion batteries. Science Progress, 98(3), pp. 264-275. ISSN (print) 0036-8504

Fountas, N. A., Vaxevanidis, N. M., Stergiou, C. I. and Benhadj-Djilali, R. (2016) A virus-evolutionary multi-objective intelligent tool path optimization methodology for 5-axis sculptured surface CNC machining. Engineering with Computers, ISSN (print) 0177-0667 (Epub Ahead of Print)

Fountas, N.A., Vaxevanidis, N.M., Stergiou, C.I. and Benhadj-Djilali, R. (2013) Optimum CNC free-form surface machining through design of experiments in CAM software. In: Davim, J. Paulo, (ed.) Modern mechanical engineering: research, development and education. Springer. pp. 243-284. (Materials Forming, Machining and Tribology) ISBN 9783642451751

Fountas, N.A., Vaxevanidis, N.M., Stergiou, C.I. and Benhadj-Djilali, R. (2013) Surface error investigation on finish-machined sculptured models simulated in CAM software. In: 13th International Conference ″Research and Development in Mechanical Industry″ RaDMI 2013; 12-15 Sept 2015, Kopaonik, Serbia. ISBN 9788660750428

Fountas, Nikolaos, Vaxevanidis, Nikolaos, Stergiou, Constantinos and Benhadj-Djilali, Redha (2014) Development of a software-automated intelligent sculptured surface machining optimization environment. The International Journal of Advanced Manufacturing Technology, 75(5-8), pp. 909-931. ISSN (print) 0268-3768

Fountas, Nikolaos A., Vaxevanidis, Nikolaos M., Stergiou, Constantinos I. and Benhadj-Djilali, Redha (2016) Precision sculptured surface CNC machining using cutter location data. Key Engineering Materials, 686, pp. 224-233. ISSN (print) 1013-9826

Fountas, Nikolaos A., Vaxevanidis, Nikolaos M., Stergiou, Constantinos I. and Benhadj-Djilali, Redha (2015) Intelligent CNC tool path optimization for sculptured surface machining through a virus-evolutionary genetic algorithm. In: Davim, J. Paulo, (ed.) Modern manufacturing engineering. Cham, Switzerland : Springer International Publishing. pp. 143-177. (Materials forming, machining and tribology) ISSN (print) 2195-0911 ISBN 9783319201511

Fountas, Nikolaos A., Vaxevanidis, Nikolaos M., Stergiou, Constantinos I. and Benhadj-Djilali, Redha (2015) Quality research on the performance of a virus-evolutionary genetic algorithm for optimized sculptured surface CNC machining, through standard benchmarks. In: 9th International Quality Conference May 2015 Center for Quality, Faculty of Engineering, University of Kragujevac; 04 - 05 Jun 2015, Kragujevac, Serbia. ISBN 9788663350151

Fountas, Nikolaos A., Kechagias, John, Benhadj-Djilali, Redha, Stergiou, Constantinos I. and Vaxevanidis, Nikolaos M. (2014) Optimizing 5-axis sculptured surface finish machining through design of experiments and neural networks. In: 12th Biennial Conference on Engineering Systems Design and Analysis; 5-27 Jun 2014, Copenhagen, Denmark. (ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1) ISBN 9780791845837

G

Gao, J., Zhang, T., Bao, Y. and Gawne, D.T. (2010) Plasma-scan sintering of aluminosilicate sol-gel films. Journal of the European Ceramic Society, 30(4), pp. 847-855. ISSN (print) 0955-2219

Gault, Richard, Cooper, Richard, Wang, J and Collin, Graham (2008) Design tool methodology for simulation of enclosure cooling performance. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Gawne, D.T., Zhang, T. and Bao, Y. (2001) Heating effect of flame impingement on polymer coatings. In: International Thermal Spray Conference; 28-30 May 2001, Singapore, Singapore. (Proceedings of the International Thermal Spray Conference)

Gawne, D.T., Zhang, T. and Bao, Y. (1998) Degradation of in-flight PMMA particles during thermal spraying. In: 15th International Thermal Spray Conference; 25-29 May 1998, Nice, France. (Proceedings of the 15th International Thermal Spray Conference)

Ghafari-Namini, N. and Ghasemnejad, H. (2015) Controllable crack propagation in off-axis crushing of stitched composite absorbers. Open Journal of Composite Materials, 5(4), pp. 93-100. ISSN (print) 2164-5612

Ghafari-Namini, N., Ghasemnejad, H. and Limbachiya, M. (2012) Advanced finite element analysis to predict off-axis crushing behaviour of composite aero-structures. Key Engineering Materials, 488-89, pp. 41-44. ISSN (online) 1662-9795

Ghafari-Namini, N. and Ghasemnejad, H. (2012) Effect of natural stitched composites on the crashworthiness of box structures. Materials & design, 39, pp. 484-494. ISSN (print) 0264-1275

Ghafari-Namini, N., Ghasemnejad, H. and Limbachiya, M. (2011) Advanced finite element analysis to predict off-axis crushing behaviour of composite aero-structures. In: 10th International Conference on Fracture and Damage Mechanics; 19 - 21 Sep 2011, Dubrovnik, Croatia.

Ghafari-Namini, Nasrin (2013) Design of new composite crash absorbers stitched by natural fibres to improve effective crack growth. (PhD thesis), Kingston University.

Ghasemnejad, H. (2014) Explicit finite element methods in modelling of crushing process of FRP composite absorbers. In: 7th International Conference on Finite Differences, Finite Elements, Finite Volumes and Boundary Elements (F-and-B '14); 15-17 May 2014, Gdansk - Poland.

Ghasemnejad, H., Ghafari-Namini, N. and Ravanpak, Z (2014) Failure Analysis of Off-Axis Crushing of Stitched Composite Absorbers. In: The 5th International Conference on Theoretical and Applied Mechanics (TAM '14); 30 Oct - 01 Nov 2014, Lisbon, Portugal. ISBN 9789604743964

Ghasemnejad, H. and Mirzaii, H. (2014) A robust finite element technique to model interlaminar damage in composite wind turbine blade materials. In: World Renewable Energy Congress XIII and Exhibition 2014; 3-8 Aug 2014, London, UK.

Ghasemnejad, H., Barrington, P.E. and Roshan, G. (2013) Advanced crash absorbers stitched by natural fibres to improve effective crack growth resistance. In: International Conference on Composite Materials (ICCM19); 28 Jul - 2 Aug 2013, Montreal, Canada. (Unpublished)

Ghasemnejad, H., Argentiero, Y., Tez, T.A. and Barrington, P.E. (2013) Impact damage response of natural stitched single lap-joint in composite structures. Materials and Design, 51, pp. 552-560. ISSN (print) 0264-1275

Ghasemnejad, H. and Ghafari-Namini, N. (2012) Protection of offshore wind turbine blades against extreme conditions. In: In International Symposium on Environment Friendly Energies and Applications (EFEA 2012); 25-26 June 2012, Newcastle, UK.

Ghasemnejad, H. (2012) To improve crashworthy behaviour of FRP composite structures using natural flax yarn. In: Composites Engineering Conference 2012; 6 Nov 2012, Birmingham, U.K.. (Unpublished)

Ghasemnejad, H., Soroush, V.R., Mason, P.J. and Weager, B. (2012) To improve impact damage response of single and multi-delaminated FRP composites using natural Flax yarn. Materials & Design, 36, pp. 865-873. ISSN (print) 0264-1275

Ghasemnejad, H., Thomas, V. and Hadavinia, H. (2011) Mixed-mode delamination failure of z-pinned hybrid laminated composites. In: 9th International Conference on Fracture and Damage Mechanics; 20-22 Sep 2010, Nagasaki, Japan. (Key Engineering Materials, no. 452-453) ISSN (print) 1013-9826

Ghasemnejad, H., Occhineri, L. and Swift-Hook, D.T. (2011) Post-buckling failure in multi-delaminated composite wind turbine blade materials. Materials & Design, 32(10), pp. 5106-5112. ISSN (print) 0264-1275

Ghasemnejad, H. and Maheri, A, (2010) Buckling analysis for design of horizontal axis wind turbine (HAWT) composite blades. In: Composites UK 10th Annual Conference: Innovation in Composites; 05 - 06 May 2010, Birmingham, U.K.. (Unpublished)

Ghasemnejad, H. and Aboutorabi, A. (2010) Cohesive zone modelling of Mode-I & Mode-II interlaminar crack propagation in laminated composite. In: ICCE-18; 04 - 10 July 2010, Anchorage, Alaska, U.S..

Ghasemnejad, H., Hadavinia, H. and Aboutorabi, A. (2010) Effect of delamination failure in crashworthiness analysis of hybrid composite box structures. Materials & Design, 31(3), pp. 1105-1116. ISSN (print) 0264-1275

Ghasemnejad, H., Hadavinia, H. and Ordys, A. (2009) Coupling of interlaminar fracture toughness and crashworthiness in woven CFRP composite box structures. In: Composites 2009 - 2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites; 1-3 April, Imperial College, London, UK. (Unpublished)

Ghasemnejad, H., Hadavinia, H. and Lewis, E. (2008) Crushing behaviour of CFRP composite structure. Key Engineering Materials, 385-38, pp. 85-88. ISSN (print) 1013-9826

Ghasemnejad, H., Hadavinia, H., Marchant, D. and Aboutorabi, A. (2008) Energy absorption of thin-walled corrugated crash box in axial crushing. Structural Durability & Health Monitoring, 4(1), pp. 29-46. ISSN (print) 1930-2983

Ghasemnejad, H., Hadavinia, H. and ABOUTORABI, A. (2008) Study on energy absorption of GFRP composite crash box. In: Jones, N and Brebbia, C.A., (eds.) Structures Under Shock and Impact X. Ashurst, Southampton : WIT press. pp. 177-184. ISBN 9781845641078

Ghasemnejad, H., Hadavinia, H. and Aboutorabi, A. (2008) Study on energy absorption of GFRP composite crash box. In: Tenth International Conference on Structures Under Shock and Impact; 14 - 16 May 2008, Algarve, Portugal. (WIT Transactions on the Built Environment, no. 98) ISSN (print) 1743-3509

Ghasemnejad, H., Hadavinia, H. and Simpson, G.B. (2007) Crashworthiness optimization of crash box in automotive structure. In: 6th International Conference on Fracture and Damage Mechanics (FDM07); 17-19 Jul 2007, Maderia, Portugal.

Ghasemnejad, Hessam and Mirzaii, Hossein (2014) To improve mixed-mode interlaminar fracture toughness of composite sub-structures. Open Journal of Composite Materials, 4(1), pp. 32-39. ISSN (print) 2164-5612

Ghasemnejad, Hessam and Aboutorabi, Akbar (2014) The response of natural fibre composites to impact damage: a case study. In: UNSPECIFIED, (ed.) Natural fibre composites: materials, processes and properties. Cambridge, U.K. : Woodhead Publishing Ltd. pp. 345-363. (Woodhead Publishing Series in Composites Science and Engineering, no. 47) ISBN 9780857095244

Ghasemnejad, Hessam and Weager, B. (2011) Damage resistance of natural z-pinned composite lap-joints under impact loading. In: Ecocomp 2011: 4th International Conference on Sustainable Materials, Polymers and Composites; 06 - 07 Jul 2011, Birmingham, U.K.. (Unpublished)

Ghasemnejad, Hessammaddin (2011) Avoid catastrophic failure in wind turbine blades: a study of delamination under various loading conditions. Windtech International, ISSN (print) 1574-2415

Ghasemnejad, Hessammaddin and Aboutorabi, Akbar (2011) Cohesive zone modeling (CZM) in prediction of delamination failure in laminated composite structures. Journal of Materials Science and Engineering, 5(1), pp. 61-64. ISSN (print) 1934-8959

Ghasemnejad, Hessammaddin (2009) Effects of delamination failure in crashworthiness of laminated composite box structures. (PhD thesis), Kingston University.

Giaccone, PR, Jones, GA, Minelly, S and Curley, AJ (1999) Motion-compensated multichannel noise reduction of colour film sequences. Journal of Electronic Imaging, 8(3), pp. 246-254. ISSN (online) 1017-9909

Gillmore, Gavin K, Crockett, Robin, Denman, Tony, Flowers, Alan and Harris, Richard (2012) Radium dial watches, a potentially hazardous legacy? Environment International, 45, pp. 91-98. ISSN (print) 0160-4120

Ginzinger, L., Sahinkaya, M. N., Heckmann, B., Keogh, P. and Ulbrich, H. (2011) On the optimization problem of model-based monitoring. Science China Technological Sciences, 54(5), pp. 1095-1106. ISSN (print) 1674-7321

Giovanini, Leonardo, Ordys, Andrzej W. and Grimble, Michael J. (2006) Adaptive predictive control using multiple models, switching and tuning. International Journal of Control, Automation and Systems, 4(6), pp. 669-681. ISSN (print) 1598-6446

Godbolt, Bryan, Vitzilaios, Nikolaos I. and Lynch, Alan F. (2013) Experimental Validation of a Helicopter Autopilot Design using Model-Based PID Control. Journal of Intelligent and Robotic Systems, 70(1), pp. 385-399. ISSN (print) 0921-0296

Godbolt, Bryan, Vitzilaios, Nikolaos, Bergen, Chris and Lynch, Alan F. (2013) Experimental Validation of a Helicopter Autopilot: Time-Varying Trajectory tracking. In: International Conference on Unmanned Aircraft Systems (ICUAS); 28-31 May, 2013, Atlanta, GA, U.S.A.. ISBN 9781479908158

Gohar, R. and Safa, M. (2010) Fluid film lubrication. In: Rahnejat, H., (ed.) Tribology and dynamics of engine and powertrain. Cambridge, U.K. : Woodhead Publishing. pp. 132-170. ISBN 9781845693619

Gohar, R. and Safa, M. (2010) Measurement of contact pressure under elastohydrodynamic lubrication conditions. In: Rahnejat, H., (ed.) Tribology and dynamics of engine and powertrain. Cambridge, U.K. : Woodhead Publications. pp. 222-245. ISBN 9781845693619

Gordnian, K., Hadavinia, H., Simpson, G. and Aboutorabi, A. (2007) Calculation of energy release rate in mode I delamination of angle ply laminated composites. In: ICCES07 International Conference on Computational & Experimental Engineering and Sciences; 3-8 Jan 2007, Florida, U.S.. (International Conference on Computational and Experimental Engineering and Sciences, no. 1) ISSN (online) 1933-2815

Gorry, B., Chen, Z., Hammond, K., Wallace, A. and Michaelson, G. (2007) Using mean-shift tracking algorithms for real-time tracking of moving images on an autonomous vehicle testbed platform. In: Conference of the World Academy of Science Engineering and Technology; 23 - 25 Nov 2007, Venice, Italy.

Gorry, Benjamin, Chen, Zezhi, Hammond, Kevin, Wallace, Andy and Michaelson, Greg (2007) Using mean-shift tracking algorithm for real-time tracking of moving images on an autonomous vehicle testbed platform. International Journal of Computer Science and Engineering, 1(3), pp. 165-170.

Grant, R J and Smart, J (1997) A parametric study of the elastic stress distribution in pin-loaded tubes. Journal of Strain Analysis for Engineering Design, 32(3), pp. 213-228. ISSN (print) 0309-3247

Grant, RJ and Smart, J (2000) A comparison of the SPATE stress analysis technique and finite element results for pin-loaded tubular joints. In: 9th International Scientific Conference on Achievements in Mechanical and Materials Engineering; 11-14 Oct 2000, Gdansk, Sopot, Poland. (AMME 2000) ISBN 8391445801

Grant, RJ and Smart, J (1999) Crack growth in pin-loaded tubes: part 1: numerical analysis. The Journal of Strain Analysis for Engineering Design, 34(4), pp. 253-269. ISSN (print) 0309-3247

Grant, RJ and Smart, J (1999) Crack growth in pin-loaded tubes: part 2: comparison of experimental data with numerical results. The Journal of Strain Analysis for Engineering Design, 34(4), pp. 271-284. ISSN (print) 0309-3247

Grimble, M.J. and Ordys, A.W. (2001) Nonlinear predictive control for manufacturing and robotic applications. In: 7th International Conference on Methods and Models in Automation and Robotics; 28-21 Aug 2001, Miedzyzdroje, Poland. (Proceedings of the International Symposium on Methods and Models in Automation and Robotics, no. 2) ISBN 9788388764752

Grimble, M.J. and Ordys, Andrzej W. (2001) Predictive control for industrial applications. Annual Reviews in Control, 25, pp. 13-24. ISSN (print) 1367-5788

H

Hadavinia, H. and Elmarakbi, A. (2011) Special issue on structural impact and crashworthiness: part I a preface. International Journal of Vehicle Structures and Systems, 3(2), ii. ISSN (print) 0975-3060

Hadavinia, H. (2007) Determination of mode II fracture toughness in delamination of angle-ply composite beams. In: World Congress on Engineering 2007 (; 2-4 Jul 2007, London, UK. (Unpublished)

Hadavinia, H., Kawashita, L., Kinloch, A. J., Moore, D. R. and Williams, J.G. (2006) A numerical analysis of the elastic-plastic peel test. Engineering Fracture Mechanics, 73(16), pp. 2324-2335. ISSN (print) 0013-7944

Hadavinia, H., Kinloch, A. J., Little, M.S.G. and Taylor, A.C. (2002) Prediction of fatigue crack growth in adhesive joints under environmental attack. In: 8th International Fatigue Conference; 2-7 Jun 2002, Stockholm, Sweden. (Fatigue 2002 - Proceedings of the 8th International Fatigue Conference, no. 8) ISBN 9781901537307

Hadavinia, H., Travis, R.P. and Fenner, R.T. (2000) C1-continuous generalised parabolic blending elements in the Boundary Element Method. Mathematical and Computer Modelling, 31(8-9), 17-34.. ISSN (print) 0895-7177

Hadavinia, H., Blackman, B.R., Kinloch, A. J., Ring-Groth, M. and Williams, J.G. (1999) The peel testing of adhesively-bonded joints. In: UNSPECIFIED, (ed.) Adhesion Conference. The Institute of Materials, Minerals and Mining. pp. 243-250. (In Press)

Hadavinia, H., Steidler, S, Durodola, J. and Beevers, A. (1998) Stiffness Sensitivity of Adhesive bonded coach joints in automotive structures. In: Structural adhesives in engineering. 5th International Conference; 1-3 April 1998, Bristol, UK. ISBN 9781861250667

Hadavinia, Homa and Ashcroft, Ian (2012) Forward to Special Issue on blast and impact of engineering structures. Central European Journal of Engineering, 2(4), pp. 471-472. ISSN (print) 1896-1541

Hadavinia, Homayoun, Dogan, Fatih, Elmarakbi, Ahmed and Khalili, S.M.R. (2011) Modelling of low velocity impact of laminated composite substructures. International Journal of Vehicle Structures and Systems, 3(2), pp. 96-106. ISSN (print) 0975-3060

Hadavinia, Homayoun (2008) Design aspect of composite blades for wind turbine- delamination. In: International Workshop on natural and low-cost materials in wind energy technologies; 10 - 12 Nov 2008, Dhulikel, Nepal.

Hadavinia, Homayoun (1995) Boundary element with blending shape functions for potential problems. (PhD thesis), Imperial College London (University of London).

Hamzeei, M. and Zanjirani Farahani, R. (2007) Two optimal algorithms for finding bi-directional shortest path design problem in a block layout. Journal of Industrial Engineering International, 4(3), pp. 24-34. ISSN (print) 1735-5702

Hamzeei, Mahdi, Zanjirani Farahani, Reza and Rashidi-Bejgan, Hannaneh (2013) An exact and a simulated annealing algorithm for simultaneously determining flow path and the location of P/D stations in bidirectional path. Journal of Manufacturing Systems, 32(4), pp. 648-654. ISSN (print) 0278-6125

Hamzheei, Mahdi, Zanjirani Farahani, Reza and Rashidi, Hannaneh (2013) An ant colony-based algorithm for finding the shortest bidirectional path for automated guided vehicles in a block layout. The International Journal of Advanced Manufacturing Technology, 64(1-4), pp. 399-409. ISSN (print) 0268-3768

Han, T. W., He, P. F., Wang, J. and Wu, A.H. (2009) Numerical simulation of temperature dependence of tensile mechanical properties for single graphene sheet. Journal of Tongji University (Natural Science), 37(12), ISSN (print) 0253-374X

Han, T. W., He, P. F., Wang, J., Zheng, B. L. and Wu, A. H. (2009) Strain rate dependences of tensile failure process for single graphene sheet: a molecular dynamics study. Science in China Series G: Physics, Mechanics & Astronomy, 39(9), pp. 1312-1319. ISSN (print) 1672-1780

Han, T.W., He, P.F., Wang, J. and Zheng, B.L. (2009) Molecular dynamics simulation of beta-SiC nanowire under uniaxial tension. Chinese Journal of Materials Research, 23(4), pp. 337-342. ISSN (print) 1005-3093

Haque, MN, Ransom, ECP and Self, A (1997) High performance supersonic aircraft intake design. In: UNSPECIFIED, (ed.) 20th Congress of the International Council of the Aeronautical Sciences. Reston, VA, U.S.A. : American Institute of Aeronautics and Astronautics. pp. 1004-1014. (AIAA Conference Proceedings Series, no. ICAS 199) ISBN 1563472198

Haque, MN, Ransom, ECP and Self, A (1996) High performance supersonic aircraft intake design. In: 20th Congress of the International Council of the Aeronautical Sciences; 8-13 Sep 1996, Sorrento, Italy. (AIAA Conference Proceedings Series) ISBN 1563472198

Harjoprayitno, W.W., Hadavinia, H. and Kinloch, A. J. (1999) Epoxy-moulded products: studying and increasing the interfacial adhesion. In: UNSPECIFIED, (ed.) Adhesion Conference. The Institute of Materials, Minerals and Mining. pp. 341-346. (In Press)

Hartavi, A. E., Tuncay, R. N. and Sahinkaya, M. N. (2006) The effect of current control strategies on power consumption of a magnetically levitated turbomolecular pump. In: IPEMC 2006: CES/IEEE 5TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE; Aug 14-16 2006, Shanghai, China. (IEEE International Power Electronics and Motion Control Conference IPEMC) ISBN 9781424404483

Hassanin, Hany, Essa, Khamis, El-Sayed, Mahmoud Ahmed and Attallah, Moataz M. (2016) Enhancement of student learning and feedback of large group engineering lectures using audience response systems. Journal of Materials Education, 38(5-6), pp. 175-190. ISSN (print) 0738-7989

Hassanin, Hany, Modica, Francesco, El-Sayed, Mahmoud Ahmed, Liu, Jian and Essa, Khamis (2016) Manufacturing of Ti-6Al-4V Micro-Implantable Parts using hybrid selective laser melting and micro-electrical discharge machining. Advanced Engineering Materials, ISSN (print) 1438-1656 (Epub Ahead of Print)

Hassanin, Hany, Essa, Khamis, Qiu, Chunlei, Abdelhafeez, Ali M., Adkins, Nicholas J.E. and Attallah, Moataz M. (2016) Net-shape manufacturing using hybrid selective laser melting/hot isostatic pressing. Rapid Prototyping Journal, ISSN (print) 1355-2546 (In Press)

Hedayatian, M., Liaghat, G.H., Rahimi, Gh, Pol, M.H., Hadavinia, H. and Zamani, R. (2015) Investigation of the high velocity impact behavior of grid cylindrical composite structures. Polymer Composites, ISSN (print) 0272-8397 (Epub Ahead of Print)

Heidari, A. and Wen, J. (2016) Numerical simulation of detonation failure and re-initiation in bifurcated tubes. International Journal of Hydrogen Energy, ISSN (print) 0360-3199 (Epub Ahead of Print)

Heidari, A. and Wen, J.X. (2011) Flame acceleration and transition from deflagration to detonation in hydrogen explosions. In: 4th International Conference on Hydrogen Safety, ICHS; 12 - 14 Sept 2011, San Francisco, U.S.A..

Heidari, Ali and Wen, Jennifer (2015) Numerical simulation of detonation failure and re-initiation in bifurcated tubes. In: The 6th International Conference on Hydrogen Safety (ICHS 2015); 19-21 Oct, 2015, Yokohama, Japan.

Heidari, Ali and Wen, Jennifer (2015) Numerical simulation of diverging detonation in hydrogen air mixtures. In: The 6th International Conference on Hydrogen Safety (ICHS 2015); 19-21 Oct 2015, Yokohama, Japan.

Heidari, Ali and Wen, Jennifer (2014) Flame acceleration and transition from deflagration to detonation in hydrogen explosions. International Journal of Hydrogen Energy, 39(11), pp. 6184-6200. ISSN (print) 0360-3199

Heidari, Ali and Wen, Jennifer X. (2014) Numerical simulation of flame acceleration and deflagration to detonation transition in hydrogen-air mixture. International Journal of Hydrogen Energy, 39(36), pp. 21317-21327. ISSN (print) 0360-3199

Heidari, Ali, Xu, Baopeng, Jie, Hongen and Wen, Jennifer (2012) Numerical simulation of carbon dioxide dispersion from vertical vent release. In: Third International Forum on Transportation of CO2 by Pipeline; 20-21 June 2012, Newcastle, U.K..

Heidari, Ali, Ferraris, Sergio, Wen, Jennifer and Tam, Vincent (2008) Flame acceleration around obstacles: numerical simulation with OPENFOAM. In: 41st Meeting United Kingdom Explosion Liaison Group; 13 May 2008, Thornton, U.K.. (Unpublished)

Heidari, Ali and Mazaheri, Kiumars (2007) Determination of detonation equilibrium parameters using genetic algorithm. In: 15th Annual Conference (International) on Mechanical Engineering; 15 - 17 May 2007, Tehran, Iran.

Holland, F. J. and Welch, C. S. (2002) Olfactory environment design for human spacecraft. In: 53rd International Astronautical Congress of the International Astronautical Federation; 10-19 Oct 2002, Houston, Texas, USA.

Holt, Andrew (2009) Environmental management accounting: empirical evidence from the UK manufacturing sector. In: Management Accounting Research Group (MARG) Conference: Innovation and Sustainability in Management Accounting; 1 Apr 2009, London, U.K. (Unpublished)

Hope, Lancelot John (1993) The fountain flow effects created by a pair of impinging gas jets. (PhD thesis), Kingston University.

Horikiri, Kana (2015) Numerical simulation and indoor airflow and heat transfer study for thermal comfort. (PhD thesis), Kingston University.

Horne, Jim and Rumbold, John (2015) Sleep-related road collisions. Medicine, Science and the Law, 55(3), pp. 183-185. ISSN (print) 0025-8024

Hosseini, Seyedmohsen, Abdolah, Rushed and Khani, Amir (2008) Investigation of the idea of active suspension system application in hybrid electric vehicles. In: World Congress on Engineering 2008; 2-4 Jul 2008, London, U.K..

Hosseini, Seyedmohsen, Abdolah, Rushed and Khani, Amir (2008) A developed quasi-dimensional combustion model in spark-ignition engines. In: World Congress on Engineering 2008; 2-4 Jul 2008, London, U.K..

Hutangkabodee, Suksun, Zweiri, Yahya, Seneviratne, Lakmal and Althoefer, Kaspar (2008) Soil parameter identification and driving force prediction for wheel-terrain interaction. International Journal of Advanced Robotic Systems, 5(4), 425 - 432. ISSN (print) 1729-8814

Hutangkabodee, Suksun, Zweiri, Yahya H., Seneviratne, Lakmal D. and Althoefer, Kaspar (2006) Performance prediction of a wheeled vehicle on unknown terrain using identified soil parameters. In: International Conference on Robotics and Automation (ICRA); 15 - 19 May 2006, Orlando, USA. (Proceedings of the International Conference on Robotics and Automation) ISSN (print) 1050-4729 ISBN 0780395050

Hutangkabodee, Suksun, Zweiri, Yahya Hashem, Seneviratne, Lakmal Dasarath and Althoefer, Kaspar (2006) Soil parameter identification for wheel-terrain interaction dynamics and traversability prediction. International Journal of Automation and Computing, 3(3), pp. 244-251. ISSN (print) 1476-8186

Hutangkabodee, Suksun, Zweiri, Yahya H., Seneviratne, Lakmal D. and Althoefer, Kaspar (2005) Traversability prediction for unmanned ground vehicles based on identified soil parameters. In: 16th IFAC World Congress; 4-8 July 2005, Czech Republic. ISBN 9783902661753

Hutangkalodee, S., Zweiri, Y. H., Seneviratne, L. D. and Altho, K. (2006) Multi-solution problem for track-terrain interaction dynamics and lumped soil parameter identification. In: Corke, P. and Sukkariah, S., (eds.) Field and service robotics. Berlin ; Heidelberg : Springer-Verlag. pp. 517 - 528. (Springer tracts in advanced robotics, no. 25) ISBN 9783540334521

I

Iravani, P. and Sahinkaya, M. N. (2010) Variable-velocity exponential input shaping for position controlled robotic systems. In: UNSPECIFIED, (ed.) ASME 2010 Dynamic Systems and Control Conference. Massachusetts, USA : American Society of Mechanical Engineers. pp. 345-351. ISBN 9780791844182

Ismail, Mohd Azmi bin (2014) Enhancement of heat transfer performance on nacelle lip-skin for swirl anti-icing. (PhD thesis), Kingston University.

Ives, A. O., Wang, J, Raghunathan, S, Benard, E. and Sloan, P. (2007) Three dimensional numerical solution of heat transfer in a honeycomb cell. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Ives, Anthony O., Wang, Jian, Raghunathan, Srinivasan and Sloan, Patrick (2011) Heat transfer through a idealised bias flow acoustic liner. Journal of Thermophysics and Heat Transfer, 25(3), pp. 404-423. ISSN (print) 0887-8722

Ives, Anthony O., Wang, Jian, Raghunathan, Srinivasan and Sloan, Patrick (2011) Heat transfer through a single hole bias flow acoustic liner. Journal of Thermophysics and Heat Transfer, 25(3), pp. 409-423. ISSN (print) 0887-8722

Izzard, V. G., Hadavinia, H., Morris, V.J., Foot, P.J.S., Wilson, L. and Hewson, K. (2012) Compression and recovery behaviour of polyamide-6 based foams. Polymer & Polymer Composites, 20(5), p. 425. ISSN (print) 0967-3911

Izzard, V.G., Bradsell, C.H., Hadavinia, H., Morris, V.J., Foot, P. J. S., Wilson, L.M. and Hewson, K. (2012) Performance of nylon based polymer foams at elevated temperature under tensile loading. Key Engineering Materials, 488-48, pp. 286-289. ISSN (print) 1013-9826

Izzard, Vanessa (2012) Dynamic performance and recovery properties of polyamide foams. (PhD thesis), Kingston University.

Izzard, Vanessa, Bradsell, Colin, Hadavinia, H., Morris, Valerie, Foot, P.J.S. and Witten, N. (2010) Investigation of the compression recovery properties of Polyamide-6 cellular solid over the temperature range of -5°C to 90°C. Key Engineering Materials, 417-18, pp. 933-936. ISSN (print) 1013-9826

J

Jafari, D., Moattar Husseini, S. M., Fazel Zarandi, M. H. and Zanjirani Farahani, R. (2009) Coordination of order and production policy in buyer-vendor chain using PROSA holonic architecture. The International Journal of Advanced Manufacturing Technology, 45(9-10), pp. 1033-1050. ISSN (print) 0268-3768

Ji, Hua, Li, Yi and Wang, Jian (2008) A software oriented CNC system based on Linux/RTLinux. International Journal of Advanced Manufacturing Technology, 39(3-4), pp. 291-301. ISSN (print) 0268-3768

Jiang, Y.P., Guo, W. L., Yue, Z. F. and Wang, J. (2006) On the study of the effects of notch shape on creep damage development under constant loading. Materials Science and Engineering A, 437(2), pp. 340-347. ISSN (print) 0921-5093

Jie, Hongen (2013) CFD modelling of transient two-phase flows for high pressure pipeline decompression. (PhD thesis), Kingston University.

Jung, C.K., Lee, J.B., Wang, X.Y. and Song, Y.H. (2007) Wavelet based noise cancellation technique for fault location on underground power cables. Electric Power Systems Research, 77(10), pp. 1349-1362. ISSN (print) 0378-7796

K

Kang, Yun (2004) Large eddy simulation of turbulent diffusion flames and pool fires. (PhD thesis), Kingston University.

Kanistras, Konstantinos, Chander Saka, Pranith, Valavanis, Kimon P., Vitzilaios, Nikolaos and Rutherford, Matthew J. (2015) Design and Development of an Air Supply Unit for Circulation Control Wing-Based UAVs. In: 2015 IEEE Aerospace Conference; 7-14 March 2015, Big Sky, MT, U.S.A.. ISSN (print) 1095-323X ISBN 9781479953790

Kanistras, Konstantinos, Chander Saka, Pranith, Valavanis, Kimon P., Vitzilaios, Nikolaos I. and Rutherford, Matthew J. (2015) Low Speed Wind Tunnel Investigation of a Circulation Control Wing for Enhanced Lift. In: 33rd AIAA Applied Aerodynamics Conference; 22–26 June, 2015, Dallas, TX, U.S.A..

Kanistras, Konstantinos, Rutherford, Matthew J., Vitzilaios, Nikolaos and Valavanis, Kimon P. (2014) Experimental Study of Circulation Control Wings at Low Reynolds Numbers. In: 32nd AIAA Applied Aerodynamics Conference; 16–20 June, 2014, Atlanta, GA, U.S.A..

Kapadoukas, G.G. and Self, A. (1995) Taxonomy of aircraft ground modal behaviour: a brief report. Simulation, 65(4), pp. 257-266. ISSN (print) 0037-5497

Kapadoukas, GG and Self, A (2000) A taxonomy of aircraft ground handling modes. Aircraft Engineering and Aerospace Technology, 72(4), pp. 328-333. ISSN (print) 1748-8842

Kapadoukas, GG, Self, AW and Marteau, F (1997) The simulation of aircraft landing gears during usual and unusual manoeuvers. In: UNSPECIFIED, (ed.) 20th Congress of the International Council of the Aeronautical Sciences. Reston, VA, U.S.A. : American Institute of Aeronautics & Astronautics. pp. 2678-2688. (AIAA Conference Proceedings Series, no. ICAS 199) ISBN 1563472198

Kapadoukas, GG, Self, AW and Marteau, F (1996) The simulation of aircraft landing gears during usual and unusual manoeuvres. In: 20th Congress of the International Council of the Aeronautical Sciences; 8-13 Sep 1996, Sorrento, Italy. (AIAA Conference Proceedings Series) ISBN 1563472198

Katzourakis, Diomidis, Vitzilaios, Nikolaos I. and Tsourveloudis, Nikos C. (2009) Vision Aided Navigation for Unmanned Helicopters. In: 17th IEEE Mediterranean Conference on Control and Automation (MED 2009); 24–26 June, 2009, Thessaloniki, Greece. ISBN 9781424446858

Kennedy, T., Self, D., Self, A. and Safa, M. (1998) The use of simulation techniques in the design and manufacture ofsatellites. In: Simulation '98; 30 Sept - 2nd Oct 1998, York, UK. (IEE Conference Publication Series, no. 457) ISSN (print) 0537-9989 ISBN 0852967098

Kennedy, T., Self, D. G., Self, A and Safa, M. (1997) The manufacture of a low cost instrument for the Mars 96 mission. In: Factory 2000 - The Technology Exploitation Process, Fifth International Conference; 2-4 April 1997, London, UK. (IEE Conference Publication, no. 435) ISSN (print) 0537-9989 ISBN 0852966822

Keogh, P.S, Cole, M.O.T, Sahinkaya, M.N. and Burrows, C.R. (2004) On the control of synchronous vibration in rotor/magnetic bearing systems involving auxiliary bearing contact. Journal Of Engineering For Gas Turbines And Power, 126(2), pp. 366-372. ISSN (print) 0742-4795

Khali, E. and Yao, Y. (2012) RANS-based Numerical Simulation of a Rectangular Turbulent Jet in Crossflow. In: Seventh International Symposium On Turbulence, Heat and Mass Transfer; 24-27 Sept 2012, Palermo, Italy.

Khalili, S. M. R., Tavakolian, M. and Sarabi, A. (2010) Mechanical properties of nanoclay reinforced epoxy adhesive bonded joints made with composite materials. In: 3rd International Conference of Adhesion Science and Technology on Advanced Computational Engineering and Experimenting (ACE-X 2009); 22-23 Jun 2009, Rome, Italy. (Unpublished)

Khalili, S.M.R., Ghaja, R., Sadeghinia, M, Mittalc, R. K. and Mason, P. (2010) Effect of patching on charpy impact response of repaired notched plate - Experimental study. Journal of Adhesion, 86(5 & 6), pp. 561-585. ISSN (print) 0021-8464

KhodadadiAzadboni, R, Wen, J, Heidari, A, Muppala, S and Wang, C (2016) Numerical simulation of flame acceleration and transition from deflagration to detonation using OpenFOAM. In: The 11th OpenFOAM Workshop; 26 - 30 Jun 2016, Guimaraes, Portugal.

Kinloch, A. J., Hadavinia, H., Blackman, B.R.K., Ring-Groth, M., Williams, J.G. and Busso, E.P. (2000) The peel behaviour of adhesive joints. In: UNSPECIFIED, (ed.) Proceedings of the Annual Meeting of the Adhesion Society. Adhesion Society. pp. 25-28. ISSN (print) 1086-9506

Kinloch, A.J., Hadavinia, H., Kawashita, L., Moore, D. R. and Williams, J.G. (2006) A novel numerical method for analyzing peel tests. In: Adhesion Society: 29th Annual Meeting; 19-27 Feb 2006, Jacksonville, USA. (Proceedings of the Annual Meeting - Adhesion Society) ISSN (print) 1086-9506

Kock, P., Welfers, H.J., Passenberg, P., Gnatzig, S., Stursberg, O. and Ordys, A. (2008) Energieeinsparung beim Betrieb von Nutzfahrzeugen durch pradiktive Regelungsstrategien in der Langsdynamikregelung. In: Energieeinsparung durch Elektronik im Fahrzeug; 15 -16 Oct 2008, Baden-Baden, Germany.

Kock, P., Welfers, H-J, Passenberg, B., Gnatzig, S., Stursberg, O. and Ordys, A.O. (2008) Saving energy through predictive control of longitudinal dynamics of heavy trucks. In: Energieeinsparung durch Elektronik im Fahrzeug; 15-16 Oct 2008, Baden-Baden, Germany.

Kock, Peter, Weller, Ralf, Ordys, Andrzej W. and Collier, Gordana (2015) Validation Methods for Digital Road Maps in Predictive Control. IEEE Transactions on Intelligent Transportation Systems, 16(1), pp. 339-351. ISSN (print) 1524-9050

Kock, Peter (2013) Prediction and predictive control for economic optimisation of vehicle operation. (PhD thesis), Kingston University.

Koenders, M.A. (1990) Localized deformation using higher order stress/strain theory. Journal Of Energy Resources Technology, 112(1), pp. 51-53. ISSN (print) 0195-0738

Krishnan, L., Yao, Y., Sandham, N.D. and Roberts, G.T. (2005) On the response of shock-induced separation bubble to small amplitude disturbances. Modern Physics Letters B (mplb), 19(28-29), pp. 1495-1498. ISSN (print) 0217-9849

Kusztelan, A, Marchant, D.R., Yao, Y., Wang, Y., Selcuk, S and Gaikwad, A (2012) Increases in Low Speed Response of an IC Engine using a Twin-entry Turbocharger. In: World Congress of Engineering; 4-6 July 2012, London, U.K.. ISBN 9789881925220

Kusztelan, A., Marchant, Denis, Yao, Yufeng and Wang, Yawei (2013) Investigating the effects on the low speed response of a pressure charged IC engine through the application of a twin-entry turbine housing. In: Yang, Gi-Chul , Ao, Sio-long and Gelman, Len, (eds.) IAENG Transactions on Engineering Technologies. Springer Netherlands. pp. 201-213. (Lecture Notes in Electrical Engineering) ISSN (print) 1876-1100 ISBN 9789400761902

Kusztelan, Alexander (2015) An experimental and computational study of a twin-entry turbo charger for downsized internal combustion engines. (PhD thesis), Kingston University.

L

Laila, D. and Gruenbacher, E. (2007) Discrete-time control design for set point tracking of a combustion engine test bench. In: 46th IEEE Conference on Decision and Control; 12-14 Dec. 2007, New Orleans, U.S.A.. ISSN (print) 0191-2216 ISBN 9781424414970

Laila, D. S. and Gruenbacher, E. (2008) Discrete-time nonlinear observer and output feedback design for a combustion engine test bench. In: 47th IEEE Conference on Decision and Control; 9-11 Dec 2008, Cancun, Mexico.

Laila, D. S., Gruenbacher, E. and del Re, L. (2007) Discrete-time model reference controller design for a combustion engine test bench. In: 7th IFAC Symposium on Nonlinear Control Systems (NOLCOS); 22-24 Aug 2007, Pretoria, South Africa.

Laila, D.S. and Nesic, D. (2003) Discrete-time Lyapunov-based small-gain theorem for parameterized interconnected ISS systems. IEEE Transactions on Automatic Control, 48(10), pp. 1783-1788. ISSN (print) 0018-9286

Laila, Dina Shona, Lovera, Marco and Astolfi, Alessandro (2011) A discrete-time observer design for spacecraft attitude determination using an orthogonality-preserving algorithm. Automatica, 47(5), pp. 975-980. ISSN (print) 0005-1098

Laila, Dina Shona (2010) A note on human body weight dynamics and control based on the macronutrient and energy flux balance. In: 2010 American Control Conference (ACC); 30 Jun - 2 Jul 2010, Baltimore, Maryland, USA. (Unpublished)

Laila, Dina Shona and Astolfi, Alessandro (2006) Construction of discrete-time models for port-controlled Hamiltonian systems with applications. Systems and Control Letters, 55(8), pp. 673-680. ISSN (print) 0167-6911

Laing, D., Uduehi, D. and Ordys, A. (2001) Financial benefits of advanced control: benchmarking and optimization of a crude oil production platform. In: American Control Conference; 25-27 June 2001, Arlington, USA. (Proceedings of the 2001 American Control Conference, no. 6)

Laporet, Gilbert, Zanjirani Farahani, Reza and Miandoabchi, Elnaz (2006) Designing an efficient method for tandem AGV network design problem using tabu search. Applied Mathematics and Computation, 183(2), pp. 1410-1421. ISSN (print) 0096-3003

Lawrence, David (2016) British Rail Designed 1948-97. London, U.K. : Ian Allan Publishing. 272p. ISBN 9780711038370

Lawrence, David, ed. (2014) Omnibus : a social history of the London bus. London, U.K. : London Transport Museum. 292p. ISBN 9781871829235

Leung, Patrick (2002) Flexible just in time modelling. (PhD thesis), Kingston University.

Leveque, Nicolas Didier Robert Rober (2012) Feasability of lidar missions in low altitude orbits maintained by electric propulsion. (PhD thesis), Kingston University.

Levermore, Thomas, Sahinkaya, Necip, Zweiri, Yahya and Neaves, Ben (2017) Real-time velocity optimization to minimize energy use in passenger vehicles. Energies, 10(1), p. 30. ISSN (online) 1996-1073

Li, T., Li, Y. and Wang, J. (2009) Innovative form design based on functional attribute. In: 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 17th AIAA/ASME/AHS Adaptive Structures Conference, 11th AIAA Non-Deterministic Approaches Conference, 10th AIAA Gossamer Spacecraft Forum; 4 - 7 May 2009, Palm Springs, California, U.S.. (Unpublished)

Li, W, Li, Y, Wang, J and Xiong, Y (2009) Functional solving process model toward product innovation design based on a functional solving model with multiple elements and evolutions. Proceedings of the Institution of Mechanical Engineers, Part B Journal of Engineering Manufacture, 223(12), pp. 1601-1614. ISSN (print) 0954-4054

Li, Wenqiang, Li, Yan, Wang, Jian and Liu, Xiaoying (2010) The process model to aid innovation of products conceptual design. Expert Systems with Applications, 37(5), pp. 3574-3587. ISSN (print) 0957-4174

Li, Yan, Wang, Jian, Li, Xianglong and Zhao, Wu (2007) Design creativity in product innovation. International Journal of Advanced Manufacturing Technology, 33(3-4), pp. 213-222. ISSN (print) 0268-3768

Liaghat, GH., Shanazari, H., Tahmasebi, M., Aboutorabi, A. and Hadavinia, H. (2013) A Modified Analytical Model for Analysis of Perforation of Projectile into Ceramic Composite Targets. International Journal of Composite Materials, 3(6B), pp. 17-22. ISSN (print) 2166-479X

Lilley, P. A., Mason, P.J. and Blunn, G. W. (1998) In vitro generation of replacement knee wear by simulation. In: International Conference on Simulation; 30 Sept - 2 Oct 1998, York, U.K.. ISSN (print) 0537-9989 ISBN 0852967098

Lima, Kwenda L. Merkel (2010) Development and assessment of an unstructured discrete ordinates method for radiative heat transfer in non-gray media. (PhD thesis), Kingston University.

Liu, B., Zhang, T., Bao, Y. and Gawne, D.T. (2002) Numerical modelling of motion and heating of particles during plasma spraying. Surface Engineering, 18(5), pp. 350-357. ISSN (print) 0267-0844

Liu, B., Zhang, T. and Gawne, D.T. (2000) Computational analysis of the influence of process parameters on the flow field of a plasma jet. Surface and Coatings Technology, 132(2-3), pp. 202-216. ISSN (print) 0257-8972

Liu, F. and Wen, J.X. (1999) Development and validation of an advanced turbulence model for buoyancy driven flows in enclosures. International Journal of Heat and Mass Transfer, 42(21), pp. 3967-3981. ISSN (print) 0017-9310

Liu, J., Zhang, T., Bao, Y. and Gawne, D.T. (2010) Sintering behaviour of glass-silicon nitride composites for thermal spray precursor powders. Advances in Applied Ceramics: Structural, Functional and Bioceramics Journal - Advances in Psychiatric Treatment, 109(2), pp. 71-78. ISSN (print) 1743-6753

Liu, Jian, Yang, Yang, Hassanin, Hany, Jumbu, Neeraj, Deng, Sunan, Zuo, Qian and Jiang, Kyle (2016) Graphene-Alumina Nanocomposites with Improved Mechanical Properties for Biomedical Applications. ACS applied materials & interfaces, ISSN (print) 1944-8244 (Epub Ahead of Print)

Liu, Jian, Hassanin, Hany, Ni, Zhenyu, Yang, Yi, Yang, Gang and Jiang, Kyle (2016) Production of high precision micro metallic components by electroforming process. Materials and Manufacturing Processes, ISSN (print) 1042-6914 (Epub Ahead of Print)

Liu, Y., Feng, Z., Yu, K., Yue, Z. and Wang, J. (2007) Influence of fuel pump failure on the fuel feeding stability of an aircraft fuel system. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Lo, Sing Hon, Voke, Peter R. and Rockliff, Nicole J. (2000) Eddy structures in a simulated low Reynolds number turbulent boundary layer. Flow, Turbulence and Combustion, 64(1), pp. 1-28. ISSN (print) 1386-6184

Lu, Zhenzhou, Song, Jun, Song, Shufang, Yue, Zhufeng and Wang, Jian (2010) Reliability sensitivity by method of moments. Applied Mathematical Modelling, 34(10), pp. 2860-2871. ISSN (print) 0307-904X

Lu, Zhenzhou, Song, Shufang, Yue, Zhufeng and Wang, Jian (2008) Reliability sensitivity method by line sampling. Structural Safety, 30(6), pp. 517-532. ISSN (print) 0167-4730

Lukina, Elena, Kollerov, Mikhail, Meswania, Jay, Wertheim, David, Mason, Peter, WAGSTAFF, Paul, Laka, Aleksander, Noordeen, Hilali, Yoon, Wai Weng and Blunn, Gordon (2015) Analysis of retrieved growth guidance sliding LSZ-4D devices for early onset scoliosis and investigation of the use of nitinol rods for this system. Spine, 40(1), pp. 17-24. ISSN (print) 0362-2436

Lukina, Elena, Laka, Aleksandr, Kollerov, Mikhail, Sampiev, Mykhamad, Mason, Peter, Wagstaff, Paul, Noordeen, Hilali, Yoon, Wai Weng and Blunn, Gordon (2015) Metal concentrations in the blood and tissues after implantation of titanium growth guidance sliding instrumentation. The Spine Journal, ISSN (print) 1529-9430 (In Press)

Lukina, Elena (2014) An investigation of nitinol and titanium alloys for the correction of spinal scoliosis. (PhD thesis), Kingston University.

Lung, A. and Mebrahtu, H. (1996) Using expert system to aid interpreting manufacturing simulation results. In: 12th International Conference on CAD/CAM Robotics and Factories of the Future; 14-16 Aug 1996, London, U.K.. ISBN 9781898253037

Lung, A. and Mebrahtu, H. (1994) Integrated real-time manufacturing simulation with expert advice. In: 10th National Conference on Manufacturing Research; 5 - 7 Sept 1995, Loughborough, U.K.. ISBN 0748402543

Lung, A.W.M. (1998) Benefits of a systematic approach for problem analysis on manufacturing simulation modelling. In: International Conference on Simulation; 30 Sep - 2 Oct 1998, York, U.K.. ISSN (print) 0537-9989 ISBN 0852967098

Lung, Andy (1995) Develop a systematic methodology to aid stimulation modelling. In: 11th National Conference on Manufacturing Research; 12 - 14 Sept 1995, Leicester, U.K.. ISBN 0748404007

Lung, Andy and Mebrahtu, Habtom (1995) Using expert algorithm in a manufacturing simulator for continuous scheduling optimisation. In: 11th National Conference on Manufacturing Research; 12 - 14 Sept 1995, Leicester, U.K.. ISBN 0748404007

Lusty, Chris, Sahinkaya, Necip and Keogh, Patrick (2016) A novel twin-shaft rotor layout with active magnetic couplings for vibration control. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 230(3), pp. 266-276. ISSN (print) 0959-6518

M

Macchi, M., Wen, J., Volkov, K., Heidari, A. and Chung, Y. (2015) Modelling liquid fuel cascades with OpenFOAM. In: 11th Global Congress on Process Safety; 27-29 Apr 2015, Texas, USA.

Macchi, Marco, Wen, Jennifer X., Volkov, Konstantin, Heidari, Ali and Chung, Yongmann M. (2015) Modeling liquid fuel cascades with OpenFOAM. Process Safety Progress, ISSN (print) 1066-8527 (Epub Ahead of Print)

Maddah, S.R., Gough, T., Pierscionek, B. and Bruun, H.H. (2002) Investigation of slat heel effect on the flow field over multi-element aerofoils. Experimental Thermal and Fluid Science, 25(8), pp. 651-658. ISSN (print) 0894-1777

Maidi, M. and Yao, Y. (2008) Numerical visualization of vortex flow behavior in square jets in cross-flow. Journal of Visualization, 11(4), pp. 319-327. ISSN (print) 1343-8875

Maidi, Mohamed, Yao, Yufeng and Yao, Jun (2007) Numerical simulation of circular and non circular jets in cross-flow. In: Fifth International Conference on Fluid Mechanics; 15-19 Aug, 2007, Shanghai, China. ISBN 9783540759942

Maidi, Mohamed, Yao, Yufeng and Yao, Jun (2007) Numerical simulation of laminar circular and noncircular jets in cross-flow. In: 5th International Conference on Fluid Mechanics; 15 - 19 Aug 2007, Shanghai, China. ISBN 9783540759942

Maidi, Mohamed and Yao, Yufeng (2007) On the flow characteristics of normal and inclined square jets in cross-flow: a numerical study. In: 5th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics; 25 - 27 Aug 2007, Vouliagmeni, Greece. ISBN 9789608457997

Maidi, Mohamed and Yao, Yufeng (2007) On the flow interactions of multiple jets in cross-flow. In: 5th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics; 25 - 27 Aug 2007, Vouliagmeni, Greece.

Maidi, Mohamed (2006) Estimation of aerodynamic noise generated by forced compressible round jets. Comptes Rendus Mecanique, 334(5), pp. 285-291. ISSN (print) 1631-0721

Maleki, A, Donchev, T., Hadavinia, H. and Cheah, A (2010) Behaviour of steel shear wall systems with cut-outs and stiffeners. In: International Conference on Structures & Architecture; 21 -23 July 2010, Guimaraes, Portugal. ISBN 9780415492492

Manickam, Bhuvaneswaran, Franke, Joerg, Muppala, Sivva P. R. and Dinkelacker, Friedrich (2012) Large-eddy simulation of triangular-stabilized lean premixed turbulent flames: quality and error assessment. Flow, Turbulence and Combustion, 88(4), pp. 563-596. ISSN (print) 1386-6184

Mansouri, H., Monshi, A. and Hadavinia, H. (2004) Effect of local induction heat treatment on the residual stresses in the web region of a welded rail. The Journal of Strain Analysis for Engineering Design, 39(3), pp. 271-283. ISSN (print) 0309-3247

Martin, F., Duran, O. and Aguado, Jose A. (2012) Assessment of emerging faults in wind turbine power transformers using the S transform. In: European Workshop on Renewable Energy Systems,; 17-28 Sep 2012, Antalya, Turkey.

Mashayekhi, M., Ziaei-Rad, S., Parvizian, J., Hadavinia, H. and Nikbin, K. (2005) Influence of triaxial stress state on damage evolution in solids. In: 13th Annual (International) Mechanical Engineering Conference; 15 - 17 May 2005, Isfahan, Iran. (Unpublished)

Masinghe, Waruna D (2013) A biomechanical approach to analyse the kinematics and dynamics of the tennis serve. (MSc(R) thesis), Kingston University.

Mason, Peter (2007) A historical perspective of engineering maintenance training. In: Maintenance Engineering Training - Meeting future airworthiness challenges; 5 - 6 Sept 2007, London, U.K..

Mazaheri, K. and Heidari, A. (2006) Determining the equilibrium composition of combustion products. In: 1th National Iranian Congress of Chemical Engineering; 28 - 30 Nov 2006, Tehran, Iran.

Meddah, M S and Tagnit-Hamou, A (2008) Effect of mineral admixtures on shrinkage measured on massive concrete elements. In: Creep, Shrinkage and Durability Mechanics of Concrete and Concrete Structures, Proceeding of the 8th International Conference, CONCREEP8; 02 Sep - 02 Oct 2008, Ise-Shima, Japan.

Mehdigoli, H., Rahnejat, H. and Gohar, R. (1990) Vibration response of wavy surfaced disk in elastohydrodynamic rolling contact. Wear, 139(1), pp. 1-15. ISSN (print) 0043-1648

Miandoabchi, Elnaz and Zanjirani Farahani, Reza (2009) Solving the tandem AGV network design problem using tabu search: cases of maximum workload and workload balance with fixed and non-fixed number of loops. Journal of Industrial Engineering International, 5(8), pp. 37-51. ISSN (print) 1735-5702

Minelly, S., Curley, A., Giaccone, P.R. and Jones, G.A. (1998) Multi-channel adaptive signal processing of colour cinematographic imagery. In: Noblesse Workshop on Non-Linear Model Based Image Analysis; 1-3 Jul 1998, Glasgow, U.K.. (Proceedings of NMBIA) ISBN 9783540762584

Moeinifard, Majid, Liaghat, Gholamhossein, Rahimi, Gholamhossein, Talezadehlari, Ali and Hadavinia, Homayoun (2016) Experimental investigation on the energy absorption and contact force of unstiffened and grid-stiffened composite cylindrical shells under lateral compression. Composite Structures, 152, pp. 626-636. ISSN (print) 0263-8223

Mohamedy, Alaa, Ordys, Andrzej and Grimble, Michael (2002) Nonlinear predictive control of flexible manipulator systems. In: Fifteenth International Symposium on Mathematical Theory of Networks and Systems; 12-16 Aug 2002, Indiana, USA.

Monekosso, Ndedi (1999) On-board reasoning for an autonomous spacecraft. (PhD thesis), University of Surrey.

Moore, R., Murphy, A., Price, M and Wang, J (2007) Analysis driven design and optimization methods for aircraft structures using finite element analysis. In: 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference; 23-26 Apr 2007, Waikiki, Hawaii.

Muppala, S. P. Reddy (2006) A modelling approach for hydrogen-doped lean premixed turbulent combustion. In: ASME International mechanical engineering congress and exposition; 5 - 10 Nov 2006, Chicago, U.S.A..

Muppala, Siva Prasad Reddy (2005) Modelling of turbulent premixed high-pressure combustion with application towards gas turbine combustors. (PhD thesis), Friedrich-Alexander-Universitat Erlangen-Nurnberg.

N

Nanayakkara, Visakha, Ataka, Ahmad, Venetsanos, Demetrios, Duran, Olga, Vitzilaios, Nikolaos, Nanayakkara, Thrishantha and Sahinkaya, Necip (2016) Kinematic Analysis of the Human Thumb with Foldable Palm. In: 17th Towards Autonomous Robotic Systems (TAROS-16); 28–30 June 2016, Sheffield, UK. (Lecture Notes in Computer Science, no. 9716) ISSN (print) 0302-9743 ISBN 9783319403786

Nasr Esfahani, M M, Ghasemnejad, H and Barrington, P E (2010) Experimental and numerical buckling analysis of delaminated hybrid composite beam structures. In: 7th BSSM International Conference on Advances in Experimental Mechanics; 07 - 09 Sep 2010, Liverpool, U.K..

Nixon, J. D. and Davies, P. A. (2016) Construction and experimental study of an elevation linear Fresnel reflector. Journal Of Solar Energy Engineering, 138(3), 031001-031001. ISSN (print) 0199-6231

Nixon, Jonathan, Kumar Dey, Prasanta and Davies, Philip (2013) An interdisciplinary approach to designing and evaluating a hybrid solar-biomass power plant. International Journal of Energy Sector Management, 7(3), pp. 321-337. ISSN (online) 1750-6220

Nixon, Jonathan D, Dey, Prasanta K, Davies, Philip A, Sagi, Sudakar and Berry, Robert F (2014) Supply chain optimisation of pyrolysis plant deployment using goal programming. Energy, 68, pp. 262-271. ISSN (print) 0360-5442

Nixon, Jonathan D, Dey, P.K. and Davies, P.A. (2013) Design of a novel solar thermal collector using a multi-criteria decision-making methodology. Journal of Cleaner Production, 59, pp. 150-159. ISSN (print) 0959-6526

Nixon, Jonathan D, Dey, P.K., Ghosh, S.K. and Davies, P.A. (2013) Evaluation of options for energy recovery from municipal solid waste in India using the hierarchical analytical network process. Energy, 59, pp. 215-223. ISSN (print) 0360-5442

Nixon, Jonathan D, Wright, D.G., Dey, P.K., Ghosh, S.K. and Davies, P.A. (2013) A comparative assessment of waste incinerators in the UK. Waste Management, 33(11), pp. 2234-2244. ISSN (print) 0956-053X

Noonan, David P., Liu, Hongbin, Zweiri, Yahya H., Althoefer, Kaspar A. and Seneviratne, Lakmal D. (2007) A dual-function wheeled probe for tissue viscoelastic property identification during minimally invasive surgery. In: IEEE International Conference on Robotics and Automation; 10 - 14 Apr 2007, Rome, Italy. (Proceedings of the International Conference on Advanced Robotics) ISSN (print) 1050-4729

O

O'Brien, M, Camillieri, F, Vilanova, R and Ordys, A (2005) Gain scheduled predictive control for integrated wastewater systems in storm conditions. In: 10th International Conference on Urban Drainage; 21-26 Aug 2005, Copenhagen, Denmark.

O'Brien, Marie and Ordys, Andrzej W. (2006) Nonlinear predictive control of a wastewater model. In: International Control Conference (ICC2006); 30 Aug - 1 Sept 2006, Glasgow, Scotland. ISBN 0947649549

Occhineri, Lorenzo, Ghasemnejad, Hessam and Mirzaii, Hossein (2011) Use of natural Flax yarn to control post-buckling failure in multi-delaminated HAWT blade sub-structures. In: EWEA2011; 14-17 Mar 2011, Brussels, Belgium. (Unpublished)

Olugbemiga, Caroline Teniola (2003) Heterocyclic ladder polymers and oligomers for electronic devices. (PhD thesis), Kingston University.

Omer, J R, Delpak, R and Robinson, R B (2002) Instrumented load tests in mudstone: pile capacity and settlement prediction. Canadian Geotechnical Journal, 39(6), pp. 1254-1272. ISSN (print) 0008-3674

Ordys, A., Karwatzki, J. and Curley, A (2006) Practical aspects of predictive control algorithms. In: 5th WSEAS International Conference on System Science and Simulation in Engineering (ICOSSE 2006); 16-18 Dec 2006, Tenerife, Canary Islands, Spain. (Proceedings of the 5th WSEAS Int. Conf. on System Science and Simulation in Engineering) ISSN (print) 1790-5117 ISBN 9608457572

Ordys, Andrzej and Kock, Peter (2008) HIL simulations with dSpace. In: Automotive Control SIG Meeting; 23 Apr 2008, Nuneaton, U.K.. (Unpublished)

Ordys, Andrzej, Grimble, Michael J. and Kocaarslan, Ilhan (2004) Combined cycle and combined heat and power processes. In: Unbehauen, Heinz, (ed.) Encyclopedia of Life Support Systems. EOLSS Publishers, Oxford.

Ordys, Andrzej and Bentsman, Joseph (2004) Models of stochastic systems. In: Unbehauen, Heinz, (ed.) Encyclopedia of Life Support Systems. EOLSS PUblishers Oxford.

Ordys, Andrzej W. and Kock, Peter (2007) Software tests for model based applications in the automotive industry. In: 7th WSEAS International Conference on Systems Theory and Scientific Computation (ISTASC '07); 24 - 26 Aug 2007, Athens, Greece. (Unpublished)

Ordys, Andrzej W., Giovanini, Leonardo and Czechowski, Piotr (2006) Testing the algorithms of inverse simulation. In: IEEE International Conference on Control Applications (CCA '06)/IEEE International Symposium on Intelligent Control (ISIC); 04 - 06 Oct 2006, Munich, Germany.

Ouazzane, A.K, Zerzour, K., Marir, F. and Benhadj-Djilali, R. (2002) Neural network technique to improve carbon content of fly ash measurement using a laser instrument. In: 2nd WSEAS International Conference on Instrumentation, Measurement, Control, Circuits and Systems 2002 (IMCCAS 2002); May 12-16 2002, Cancun, Mexico.

Ouazzane, A.K, Zerzour, K., Marrir, F and Benhadj-Djilali, R. (2002) The use of CAD system for improving flow conditioner design to reduce installation effects on orifice meterin. In: 2nd WSEAS International Conference on Instrumentation, Measurement, Control, Circuits and Systems 2002 (IMCCAS 2002); May 12-16 2002, Cancun, Mexico.

Ouazzane, Abdel K. and Benhadj-Djilali, Redha (2002) Laser probe design for carbon content in ash measurement. Sensor Review: the International Journal of Sensing for Industry, 22(4), pp. 341-347. ISSN (print) 0260-2288

Ozdemir, Nazli G., Zhang, Tao, Hadavinia, Homayoun, Aspin, Ian and Wang, Jian (2015) Rheological properties, cure characteristics, and morphology of acrylonitrile-based nanorubber modified epoxy. Journal of Applied Polymer Science, 132(18), ISSN (print) 0021-8995

Ozdemir, Nazli Gulsine (2015) Toughening of epoxy matrix composites with nanorubber for advanced industrial applications. (PhD thesis), Kingston University.

P

Padhra, Anil (2014) Quantifying the operational benefits of aircraft surface coatings. In: Flight and Airport Operations Conference; 09-10 June 2014, Prague, Czech Republic.

Pang, Yan, Grimble, Michael John, Ordys, Andrzej W. and Reed, Jim (2007) Condition monitoring of the nuclear graphite core using benchmarking techniques. In: European Control Conference 2007 (ECC'07); 2-5 July 2007, Kos, Greece.

Papadopoulos, C., Self, A. and Kapadoukas, G. (1998) The development of a total system aircraft landing control scheme. In: International Conference on Simulation; 30 Sep - 2 Oct 1998, York, United Kingdom. (IEE Conference Publications, no. 457) ISSN (print) 0537-9989 ISBN 0852967098

Papadopoulos, Christopher A. (2000) Aileron augmented directional control and braking. (PhD thesis), Kingston University.

Papadopoulos, F., Aiyappa, D., Shapriya, R., Sotirchos, E., Ghasemnejad, H. and Benhadj-Djilali, R. (2013) Advanced natural stitched composite materials in skin-stiffener of wind turbine blade structures. Key Engineering Materials, 525-26, pp. 45-48. ISSN (print) 1013-9826

Papadopoulos, F., Aiyappa, D., Shapriya, R., Sotirchos, E., Ghasemnejad, H. and Benhadj-Djilali, R. (2012) Advanced natural stitched composite materials in skin-stiffener of wind turbine blade structures. In: 11th International Conference on Fracture and Damage Mechanics; 18-21 Sept 2012, Xian, China. (Unpublished)

Pereira, J., Tam, V., Ghasemnejad, H., Shariff, H., Wen, J. and Donchev, T. (2011) Numerical and experimental investigations on the blast resistance of lightweight metal boxes. FABIG Newsletter(57),

Petkova, Diana, Donchev, Ted and Wen, Jennifer (2014) Experimental study of the performance of CFRP strengthened small scale beams after heating to high temperatures. Construction and Building Materials, 68, pp. 55-61. ISSN (print) 0950-0618

Petkova, Diana (2010) Behaviour of RC beams strengthened with CFRP laminates at elevated temperatures. (PhD thesis), Kingston University.

Petkova, Diana, Donchev, T., Wen, J., Etebar, K. and Hadavinia, H. (2007) Effect of elevated temperatures on the bond between FRP and concrete. In: Interflam 2007: 11th International Fire Science and Engineering Conference; 3-5 Sept 2007, London, U.K.. (Conference Proceedings Volumes 1 & 2 interflam 2007) ISBN 9780955654800

Petkune, Natalja, Donchev, Ted, Hadavinia, Homayoun, Limbachiya, Mukesh and Wertheim, David (2016) Performance of pristine and retrofitted hybrid steel / fibre reinforced polymer composite shear walls. Construction and Building Materials, 117, pp. 198-208. ISSN (print) 0950-0618

Phipps, M.A., Pritchard, G. and Aboutorabi, A. (1995) The role of particle strength and filler volume fraction in the fracture of alumina-trihydrate filled epoxy-resins. Polymers and Polymer Composites, 3(2), pp. 71-77. ISSN (print) 0967-3911

Pol, M Hossein, Liaghat, Gholamhossein, Zamani, E and Ordys, A (2015) Investigation of the ballistic impact behavior of 2D woven glass/epoxy/nanoclay nanocomposites. Journal of Composite Materials, 49(12), pp. 1449-1460. ISSN (print) 0021-9983

Q

Qiu, H, Li, Y, Cheng, K, Li, Y. B. and Wang, J (2000) An approach to form deviation evaluation for CMM measurement of 2D curve contours. Journal of Materials Processing Technology, 107(1-3), pp. 119-126. ISSN (print) 0924-0136

Qiu, H., Li, Y.-B., Cheng, K., Li, Y. and Wang, J. (2000) A study on an evaluation method for form deviations of 2D contours from coordinate measurement. The International Journal of Advanced Manufacturing Technology, 16(6), pp. 413-423. ISSN (print) 0268-3768

Qiu, Hua, Lin, Chang-Jun, Li, Zi-Ye, Ozaki, Hiroaki, Wang, Jian and Yue, Yong (2005) A universal optimal approach to cam curve design using uniform B-splines. Mechanism and Machine Theory, 40(6), pp. 669-692. ISSN (print) 0094-114X

R

Rahmani, O., Khalili, S.M.R. and Malekzadeh, K. (2010) Free vibration response of composite sandwich cylindrical shell with flexible core. Composite Structures, 92(5), pp. 1269-1281. ISSN (print) 0263-8223

Rahmani, O., Khalili, S.M.R., Malekzadeh, K. and Hadavinia, H. (2009) Free vibration analysis of sandwich structures with a flexible functionally graded syntactic core. Composite Structures, 91(2), pp. 229-235. ISSN (print) 0263-8223

Raju, V, Balu, K, Collier, G and Duran, O (2011) Automated testing of satellite data configuration modules using Labview. In: 2nd International Conference on Space Technology; 15 - 17 Sept 2011, Athens, Greece.

Rayner, Robert, Sahinkaya, M. Necip and Hicks, Ben (2009) Combining inverse dynamics with traditional mechanism synthesis to improve the performance of high speed machinery. In: UNSPECIFIED, (ed.) Proceedings of the ASME dynamic systems and control conference.; Dynamic systems and control. Michigan, USA : American Society of Mechanical Engineers. pp. 393-400. ISBN 9780791843352

Rayner, Robert A. C. and Sahinkaya, M. Necip (2008) Synthesis of velocity reference cam functions for smooth operation of high speed mechanisms. In: Felipe, J. , Cetto, J.A. and Ferrier, J.L., (eds.) ICINCO 2008: Proceedings of the fifth international conference on informatics in control, automation and robotics, vol SPSMC: signal processing, systems modeling and control. Institute for Systems and Technologies of Information, Control and Communication. pp. 183-187. ISBN 9789898111326

Razmkhah, O. and Ghasemnejad, H. (2014) Explicit finite element analysis to predict impact damage response of osteoporosis hip bone. Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization, ISSN (print) 2168-1163 (Epub Ahead of Print)

Razmkhah, O., Ghasemnejad, H., Argyriou, V. and Aboutorabi, A. (2013) Advanced finite element analysis to predict impact damage behaviour of fractured hip. In: 19th Congress of the European Society of Biomechanics (ESB 2013); Aug 25-28 2013, Patras, Greece. (Unpublished)

Razmkhah, O. and Ghasemnejad, H. (2013) Impact damage response of osteoporosis hip bone. In: 4th European Conference of Mechanical Engineering (ECME' 13); 29-31 Oct 2013, Paris, France. (Recent Advances in Mechanical Engineering Applications, no. 8) ISSN (print) 2227-4596 ISBN 9789604743452

Razmkhah, O. and Ghasemnejad, H. (2012) Green composites for advanced green structures. In: International Symposium on Environment Friendly Energies and Applications (EFEA 2012); 25-27 June 2012, Newcastle, UK.

Razmkhah, Omid (2014) Effect of sideways impact fall on the osteoporosis fractures of proximal femur. (PhD thesis), Kingston University.

Rezapour, Shabnam, Zanjirani Farahani, Reza and Miandoabchi, Elnaz (2011) A machine-to-loop assignment and layout design methodology for tandem AGV systems with single-load vehicles. International Journal of Production Research, 49(12), pp. 3605-3633. ISSN (print) 0020-7543

Riyadi, T.W.B., Zhang, T., Marchant, D. and Zhu, X. (2014) Synthesis and fabrication of NiAl coatings with Ti underlayer using induction heating. Surface and Coatings Technology, 258, pp. 154-159. ISSN (print) 0257-8972

Riyadi, Tri Widodo Besar (2013) High performance intermetallic and ceramic formed by SHS process. (PhD thesis), Kingston University.

Roberts, J. B., Holmes, R. and Mason, P.J. (1986) Estimation of squeeze‐film damping and inertial coefficients from experimental free–decay data. Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science, 200(C2), pp. 123-133. ISSN (print) 0263-7154

Roberts, J. B. and Mason, P.J. (1986) An experimental investigation of pressure distributions in a journal bearing operating in the transition regime. Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science, 200(C4), pp. 251-264. ISSN (print) 0263-7154

Rosario, Ricardo A.F. (2009) Modelling of the behaviour of glazing systems exposed to fires. (PhD thesis), Kingston University.

Rose, Abigail, Crabb, Eleanor M., Qian, Yangdong, Ravikumar, M.K., Wells, Peter P., Wiltshire, Richard J.K., Yao, Jun, Bilsborrow, Robert, Mosselmans, Fred and Russell, Andrea E. (2007) Potential dependence of segregation and surface alloy formation of a Ru modified carbon supported Pt catalyst. Electrochimica Acta, 52(18), pp. 5556-5564.

Rumschinski, P, Laila, D. S., Borchers, S. and Findeisen, R. (2010) Influence of discretization errors on set based parameter estimation. In: 49th IEEE Conference on Decision and Control; 15-17 Dec. 2010, Altlanta, Georgia, USA. ISBN 9781424477456

S

Sabir, H. M. and Eames, I. W. (1999) Performance of film absorbers under the effect of a contaminant non-absorbable gas. Applied Energy, 63(4), pp. 255-267. ISSN (print) 0306-2619

Sabir, H.M. (2001) A novel GAX-R heat driven refrigeration/heat pump cycle. In: 2nd International Heat Powered Cycles Conference; 5 - 7 Sept 2001, Paris, France.

Sabir, H.M., Eames, I.W. and Suen, K.O. (1999) The effect of non-condensable gases on the performance of film absorbers in vapour absorption systems. Applied Thermal Engineering, 19(5), pp. 531-541. ISSN (print) 1359-4311

Sabir, H.M. and Eames, I.W. (1998) Theoretical comparison between lithium bromide/water vapour resorption and absorption cycles. Applied Thermal Engineering, 18(8), pp. 683-692. ISSN (print) 1359-4311

Sabir, HM, Suen, KO and Vinnicombe, GA (1996) Investigation of effects of wave motion on the performance of a falling film absorber. International Journal of Heat and Mass Transfer, 39(12), pp. 2463-2472. ISSN (print) 0017-9310

Saez, Doris, Milla, Freddy and Ordys, Andrzej W. (2007) Hybrid predictive supervisory control based on genetic algorithms for a gas turbine of combined cycle power plants. In: European Control Conference 2007 (ECC'07); 2-5 July 2007, Kos, Greece.

Saez, Doris and Ordys, Andrzej (2006) Comparison of optimal control strategies for supervisory and regulatory level. In: International Conference: Control 2006; 30 Aug - 1 Sep 2006, Glasgow, Scotland, UK.

Safa, M. M. A, Leather, J. A. and Anderson, J. C. (1979) Thin film microtransducers for elastohydrodynamic lubrication studies. Thin Solid Films, 64(2), pp. 257-262. ISSN (print) 0040-6090

Safa, M.M.A. (1982) Elastohydrodynamic studies using thin film transducers. (PhD thesis), Imperial College of Science and Technology, London.

Sagias, Vasileios, Stergiou, Constantinos, Evangelos, Ganiaris and Benhadj-Djilali, Redha (2014) Hybrid methodology of reverse 3D beams geometry analysis with embedded quality tools within the boundaries of a modern CAD system. World Transactions on Engineering and Technology Education, 12(3), pp. 443-448. ISSN (print) 1446-2257

Sahinkaya, M. N. and Plummer, A. R. (2009) Special issue on dynamics and control of parallel manipulators. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 223(1), ISSN (print) 0959-6518

Sahinkaya, M. N., Abulrub, A. H., Keogh, P. and Burrows, C. (2009) A multiobjective adaptive controller for magnetic bearing systems. In: 54th ASME Turbo Expo 2009; 08 - 12 Jun 2009, Orlando, U.S..

Sahinkaya, M. N. (2007) Virtual non-linear disturbance observer by dual inverse dynamic modelling. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 221(6), pp. 677-688. ISSN (print) 0954-4062

Sahinkaya, M. N. and Burrows, C. R. (1985) Control of stability and the synchronous vibration of a flexible rotor supported on oil-film bvearings. Journal Of Dynamic Systems, Measurement, And Control, 107(2), pp. 139-144. ISSN (print) 0022-0434

Sahinkaya, M. N. and Burrows, C. R. (1984) Estimation of linearized oil-film parameters from the out-of-balance response. Journal Of Mechanical Engineering Science - Part C, 198(2), pp. 131-135. ISSN (print) 0954-4062

Sahinkaya, M. N., Turkay, O. S. and Burrows, C. R. (1984) Minimization of the variance in oil-film damping coefficient estimates. Journal Of Dynamic Systems, Measurement, And Control, 106(4), pp. 342-349. ISSN (print) 0022-0434

Sahinkaya, M. Necip, Abulrub, Abdul-Hadi G., Keogh, Patrick S. and Burrows, Clifford R. (2011) Experiments on the transient performance of an adaptive multi-objective controller for rotating machinery. Journal Of Engineering For Gas Turbines And Power, 133(2), ISSN (print) 0742-4795

Sahinkaya, M. Necip, Abulrub, Abdul-Hadi G. and Burrows, Clifford R. (2011) An adaptive multi-objective controller for flexible rotor and magnetic bearing systems. Journal Of Dynamic Systems, Measurement, And Control, 133(3), ISSN (print) 0022-0434

Sahinkaya, M. Necip, Abulrub, Abdul-Hadi G., Burrows, Clifford R. and Keogh, Patrick S. (2010) A multiobjective adaptive controller for magnetic bearing systems. Journal Of Engineering For Gas Turbines And Power, 132(12), p. 125503. ISSN (print) 0742-4795

Sahinkaya, M. Necip, Abulrub, Abdul-Hadi G., Keogh, Patrick S. and Burrows, Clifford R. (2007) Multiple sliding and rolling contact dynamics for a flexible rotor/magnetic bearing system. IEEE/ASME Transactions on Mechatronics, 12(2), pp. 179-189. ISSN (print) 1083-4435

Sahinkaya, M. Necip, Rayner, Robert M. C., Vernon, Geoff, Shirley, Graham and Aggarwal, Raj K. (2007) Synthesis of demand signals for high speed operation of a packaging mechanism. In: UNSPECIFIED, (ed.) Proceedings of the ASME Design Engineering Technical Conferences ; Biennial conference on mechanical vibration and noise. Nevada, USA : American Soceity of Mechanical Engineers. pp. 2267-2273. ISBN 9780791848029

Sahinkaya, M. Necip and Hartavi, Ahu E. (2007) Variable bias current in magnetic bearings for energy optimization. IEEE Transactions on Magnetics, 43(3), pp. 1052-1060. ISSN (print) 0018-9464

Sahinkaya, M. Necip and Li, Yanzhi (2005) Inverse dynamic analysis and linearisation of a high speed parallel mechanism. In: UNSPECIFIED, (ed.) 29th Mechanisms and Robotics Conference, Parts A and B. American Society of Mechanical Engineers. pp. 175-181. ISBN 0791847446

Sahinkaya, M.N. (2004) Inverse dynamic analysis of multiphysics systems. Proceedings of the Institution of Mechanical Engineers Part I, 218(1), pp. 13-26. ISSN (print) 0959-6518

Sahinkaya, M.N., Cole, M.O.T. and Burrows, C.R. (2001) Fault detection and tolerance in synchronous vibration control of rotor-magnetic bearing systems. Journal Of Mechanical Engineering Science - Part C, 215(12), pp. 1401-1416. ISSN (print) 0954-4062

Sahinkaya, M.N. (2001) Input shaping for vibration-free positioning of flexible systems. Proceedings of the Institution of Mechanical Engineers Part I. Journal Of Systems And Control Engineering, 215(5), pp. 467-482. ISSN (print) 0959-6518

Sahinkaya, Mehmet N., Wang, Pengfei and Akehurst, Sam (2013) Causal inversion of non-minimum-phase systems for hardware-in-the-loop transmission testing. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 227(I3), pp. 298-307. ISSN (print) 0959-6518

Salin, A., Yao, Y. and Lo, S. (2011) Flow topology of symmetric crossing shock wave boundary layer interactions. In: 28th International Symposium on Shock Waves (ISSW 28); 17 - 22 Jul 2011, Manchester, U.K.. (Submitted)

Salin, Andrea (2014) Numerical modelling of swept and crossing shock-wave turbulent boundary-layer interactions. (PhD thesis), Kingston University.

Sarjito, and Marchant, Denis (2013) A study of a multi-stage downdraught evaporative cooling device using CFD to assess the effect of the primary inlet to mixing stack area ratio: Preliminary work to establish the baseline performance of the device. Applied Mechanics and Materials, 465-6, pp. 248-254. ISSN (print) 1660-9336

Sarjito, (2012) An investigation of the design and performance of a multi-stage downdraught evaporative cooler. (PhD thesis), Kingston University.

Sedyono, J., Hadavinia, H., Deng, J., Marchant, D.R. and Garcia, J. (2012) Optimization of the stacking sequence of laminated composite plates under buckling loads. In: XVII International Conference: Mechanics of Composite Materials; 28 May - 1 Jun 2012, Riga, Latvia.

Sedyono, Joko, Hadavinia, Homayoun, Venetsanos, Demetrios and Marchant, Denis R. (2015) Enumeration search method for optimisation of stacking sequence of laminated composite plates subjected to buckling. Open Engineering, 5(1), ISSN (online) 2391-5439

Sedyono, Joko (2014) Optimisation of stacking sequence of fibre reinforced plastic laminated composite structures subjected to buckling. (PhD thesis), Kingston University.

Seneviratne, Lakmal, Zweiri, Yahya, Hutangkabodee, Suksun, Song, Zibin, Song, Xiaojing, Chhaniyara, Savan, Milli, Said Al and Althoefer, Kaspar (2009) The modelling and estimation of driving forces for unmanned ground vehicles in outdoor terrain. International Journal of Modelling, Identification and Control (IJMIC), 6(1), pp. 40-50. ISSN (print) 1746-6172

Serpetsidakis, Michail I. (2005) Dynamic analysis of an active furling small wind turbine. (MSc(R) thesis), Kingston University.

Shakouri, P., Ordys, A. and Collier, G. (2014) Robotic Implementation of the Adaptive Cruise Control-Comparison of Three Control Methods. In: Březina, Tomáš and Jabloński, Ryszard, (eds.) Mechatronics 2013. Switzerland : Springer. pp. 633-640. ISBN 9783319022932

Shakouri, P. and Ordys, A. (2011) Application of the state-dependent nonlinear model predictive control in adaptive cruise control system. In: 14th International IEEE Conference on Intelligent Transportation Systems (ITSC); 5-7 October 2011, Washington, DC, USA. (IEEE International Conference on Intelligent Transportation Systems) ISSN (print) 2153-0009 ISBN 9781457721984

Shakouri, Payman and Ordys, Andrzej (2014) Nonlinear Model Predictive Control approach in design of Adaptive Cruise Control with automated switching to cruise control. Control Engineering Practice, 26, pp. 160-177. ISSN (print) 0967-0661

Shakouri, Payman (2012) Designing of the adaptive cruise control system-switching controller. (PhD thesis), Kingston University.

Shakouri, Payman, Ordys, Andrzej, Askari, Mohamad and Laila, Dina (2010) Longitudinal vehicle dynamics using Simulink/Matlab. In: UKACC International Conference on Control; 07 - 11 Sept 2000, Cambridge, U.K..

Shang, Zhi (2009) CFD investigation of vertical rod bundles of supercritical water-cooled nuclear reactor. Nuclear Engineering and Design, 239(11), pp. 2562-2572. ISSN (print) 0029-5493

Shang, Zhi and Yao, Yufeng (2008) CFD investigation of heat transfer in supercritical water-cooled flow through 3×3 fuel rod bundles. In: 16th International Conference on Nuclear Engineering (ICONE16); May 11–15 2008, Orlando, USA.

Shang, Zhi, Yao, Yufeng and Chen, Shuo (2008) Numerical investigation of system pressure effect on heat transfer of supercritical water flows in a horizontal round tube. Chemical Engineering Science, 63(16), pp. 4150-4158. ISSN (print) 0009-2509

Sharp, Samuel John (2013) Improving the accuracy and speed of tracking and motion stabilisation systems. (MSc(R) thesis), Kingston University.

Shawky, A., Grimble, M., Ordys, A. and Petropoulakis, L. (2001) Modelling and control design of a flexible manipulator using state-dependent Riccati equation techniques. In: 7th International Conference on Methods and Models in Automation and Robotics; 28-21 Aug 2001, Miedzyzdroje, Poland. (Proceedings of the International Symposium on Methods and Models in Automation and Robots, no. 2) ISBN 9788388764752

Shawky, Alaa, Ordys, Andrzej, Grimble, Michael J. and Petropoulakis, Lykourgos (2002) End-point control of a flexible-link manipulator using state-dependent Riccati Equation technique. Archives of Control Sciences, 12(3), pp. 191-207. ISSN (print) 1230-2384

Shi, Zhenyu, Liu, Zhanqiang, Song, Hao and Zhang, Xianzhi (2016) Prediction of contact angle for hydrophobic surface fabricated with micro-machining based on minimum Gibbs free energy. Applied Surface Science, 364, pp. 597-603. ISSN (print) 0169-4332

Singh, H, Muetze, A and Eames, PC (2010) Factors influencing the uptake of heat pump technology by the UK domestic sector. Renewable Energy, 35(4), pp. 873-878. ISSN (print) 0960-1481

Singh, H, Redpath, D.A.G., Aboutorabi, A., Kattakayam, T.A. and Griffiths, P.W. (2010) Optimum configuration of compound parabolic concentrator (cpc) solar water heater types for dwellings situated in the northern maritime climate. International Journal of Ambient Energy, 31(1), pp. 47-52. ISSN (print) 0143-0750

Singh, Harjit and Eames, Philip C. (2011) A review of natural convective heat transfer correlations in rectangular cross-section cavities and their potential applications to compound parabolic concentrating (CPC) solar collector cavities. Applied Thermal Engineering, 31(14-15), pp. 2186-2196. ISSN (print) 1359-4311

Singh, Harjit, Eames, PC, Peacock, A and Jenkins, DP (2007) Prediction of the effectiveness of a chilled ceiling coupled borehole heat exchanger system for cooling existing UK office buildings and reducing CO2 emissions. In: Improving Energy Efficiency in Commercial Building Conference (IEECB’08); 10-11 Apr 2007, Frankfurt, Germany.

Sivabavanandan, Sivalingam (2005) Thermal energy storage application for load shifting and electrical demand management in Saudi Arabia. (PhD thesis), Kingston University.

Sloan, B, Wang, J, Spence, S, Raghunathan, S and Riordan, D (2010) Aerodynamic performance of bypass engine with nozzle exit area change by warped chevrons. Proceedings of the Institution of Mechanical Engineers, Part G, Journal of Aerospace Engineering, 224(6), pp. 731-743. ISSN (print) 0954-4100

Sloan, B., Wang, J., Raghunathan, S., Benard, E., Cooper, R. and Spence, S. (2007) Performance and acoustic optimisation of nacelle nozzle throat area. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Sloan, Brendan, Wang, Jian, Spence, Stephen and Raghunathan, Srinivasan (2008) Parametric analysis of variable nacelle nozzle throat area using warped chevrons. In: Gas turbine Technical Congress and Exposition: ASME Turbo Expo 2008; 9-13 Jun 2008, Berlin, Germany.

Sloetjesa, Wim, Haverhalsa, Jaap, Kerkdijka, Kees, Ahmedb, Iman Osman, Sabir, Hisham, Eldinb, Shommo Shaa, Porsiusc, Rob, Stolkc, Ad, El Karibd, Asha, Yousifd, Kahil and Hassane, Hassan Wardi (1988) Operational results of the 13 kW/50 m3 solar driven cold store in Khartoum, The Sudan. Journal of Solar Energy, 41(4), pp. 341-347. ISSN (print) 0038-092X

Sog, Z., Hutangkabodee, S., Zweiri, Y.H., Seneviratne, L.D. and Althoefer, K. (2004) Identification of soil parameters for unmanned ground vehicles track-terrain interaction dynamics. In: SICE 2004 Annual Conference; 4-6 Aug 2004, Sapporo, Japan.

Soleimani Sedehi, Mojtaba and Zanjirani Farahani, Reza (2009) An integrated approach to determine the block layout, AGV flow path and the location of pick-up/delivery points in single-loop systems. International Journal of Production Research, 47(11), pp. 3041-3061. ISSN (print) 0020-7543

Song, Xiaojing, Seneviratne, L. D, Althoefer, K., Song, Zibin and Zweiri, Y. H. (2007) Visual odometry for velocity estimation of UGVs. In: International Conference on Mechatronics and Automation (ICMA); 5 - 8 Aug 2007, Harbin, Heilongjiang, China. (International Conference on Mechatronics and Automation, no. 2007) ISBN 9781424408283

Song, Z-B, Zweiri, Y H, Seneviratne, L D and Althoefer, K (2008) Non-linear observer for slip estimation of tracked vehicles. Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 222(4), pp. 515-533. ISSN (print) 0954-4070

Song, Z. B., Seneviratne, L. D., Althoefer, K., Song, X. J. and Zweiri, Y. H. (2009) Slip parameter estimation of a single wheel using a non-linear observer. Robotica, 27(06), pp. 801-811. ISSN (print) 0263-5747

Song, Z.B., Zweiri, Yahya H., Seneviratne, Lakmal D. and Althoefer, Kaspar (2005) Driver support system based on a non-linear slip observer for off road vehicles. In: 16th IFAC World Congress; 4-8 July 2005, Prague, Czech Republic. (Proceedings of the 16th IFAC World Congress, no. 16, 1) ISBN 9783902661753

Song, Zibin, Song, Xiaojing, Altheoer, K., Zweiri, Yahya and Seneviratne, L. (2007) Non-linear observer for slip parameter estimation of unmanned wheeled vehicles. In: International Conference on Mechatronics and Automation (ICMA); 5 - 7 Aug 2007, Harbin, Heilongjiang, China. ISBN 9781424408283

Song, Zibin, Zweiri, Yahya H. and Seneviratne, Lakmal D. (2006) Non-linear observer for slip estimation of skid-steering vehicles. In: International Conference on Robotics and Automation (ICRA); 15 - 19 May 2006, Orlando, USA. (Proceedings of the International Conference on Robotics and Automation, no. 2006) ISBN 0780395050

Soroush, V.R., Ghasemnejad, Hessam, Marchant, D.R. and Aboutorabi, A. (2011) Advanced application of natural fibres in high performance automotive composite structures. In: The Nineteenth Annual International Conference on COMPOSITES/NANO ENGINEERING (ICCE-19); 24 - 30 Jul 2011, Shanghai, China. (Unpublished)

Steidler, S., Hadavinia, H., Durodola, J. and Beevers, A. (1997) Stiffness characteristics of adhesive joints in vehicle body structures: a comparison between FE models and experimental measurement. In: Mechanical behaviour of adhesive joints: analysis, testing and design. 38th Euromech Colloquium; 4-6 Sept 1997, Nevers, France. (Euromech Colloquium, no. 358)

Su, J-L. and Ordys, A.W. (2010) Collision avoidance manoeuvre for a vehicle - a practical approach. Proceedings of the Institution of mechanical Engineers Part D-Journal of Automobile Engineering, 224(3), pp. 299-312. ISSN (print) 0954-4070

Swan, Martin (1993) Effects of cure on the mechanical properties of bosmaleimide resins. (PhD thesis), Kingston University.

T

Talal, Sina (1999) Effect of long-term compression on rigid polymer foams. (PhD thesis), Kingston University.

Tan, X., Chen, X., Wang, J. and Raghunathan, S. (2008) Modelling energy absorption in textile composite cellular structures. In: 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference; 7-10 April, 2008, IL, USA.

Tan, X., Xu, Y., Early, J., Wang, J., Curran, R. and Raghunathan, S. (2007) A framework for systematically estimating life cycle cost for integrated wing. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Tan, Xincai, Chen, Xiaogang, Wang, Jian and Raghunathan, Srinivasan (2009) Energy absorption and deformation in textile composite cellular structures. AIAA Journal: devoted to aerospace research and development, 47(3), pp. 790-795. ISSN (print) 0001-1452

Tan, Xincai, Yan, Xiu-Tan, Juster, Neal P., Raghunathan, Srinivasan and Wang, Jian (2008) Dynamic friction model and its application in flat rolling. Journal of Materials Processing Technology, 207(1-3), pp. 222-234. ISSN (print) 0924-0136

Tan, Xincai, Xu, Yunchun, Wang, Jian, Curran, Ricky, Raghunathan, Raghu, Gore, David and Doherty, John (2008) Life Cycle Assessment of Aluminium for Engineering Application. In: The 8th AIAA Aviation Technology, Integration, and Operations (ATIO) Conference,; 14 - 19 Sep 2008, Anchorage, Alaska.

Tan, Xincai, Wang, Jian, Xu, Yuchun, Curran, Ricky, Raghunathan, Srinivasan, Gore, David and Doherty, John (2008) Risk analysis in lifecycle costing of aluminium. In: 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference; 10-12 September 2008, British Columbia, Canada.

Tanner, P.G., Fraser, D.A. and Irving, A.D. (2005) Developments in thermionic energy converters. IEE Proceedings - Science, Measurement & Technology, 152(1), pp. 1-6. ISSN (print) 1350-2344

Taylor, A.C., Hadavinia, H., Kinloch, A. J. and Lee, J. H. (2004) Epoxy nanocomposites: measuring and modelling mechanical properties. In: Structural adhesives in engineering (SAEVII); 13-15 July 2004, Bristol, UK. (SAE International Conference, no. 7)

Thomas, T.G., Yao, Y.F. and Sandham, N.D. (2003) Structure and energetics of a turbulent trailing edge flow. Computers & Mathematics with Applications, 46(4), pp. 671-680. ISSN (print) 0898-1221

Thompson, S. J. and Safa, M.M.A. (1997) Development of an automated high accuracy pH measuring instruments with full audit reporting facility. In: Factory 2000 - The Technology Exploitation Process, Fifth International Conference; 2-4 April 1997, Cambridge, UK. (IEE Conference Publications, no. 435) ISSN (print) 0537-9989 ISBN 0852966822

Tian, Y. S., Wang, J and Lu, T. J. (2007) Axial load capacity of cold-formed steel wall stud with sheathing. Thin-Walled Structure, 45(5), pp. 537-551. ISSN (print) 0263-8231

Tian, Y. S., Wang, J. and Lu, T. J. (2004) Racking strength and stiffness of cold-formed steel wall frames. Journal of Constructional Steel Research, 60(7), pp. 1069-1093. ISSN (print) 0143-974X

Tian, Y. S., Wang, J., Lu, T. J. and Barlow, C. Y. (2004) An experimental study on the axial behaviour of cold-formed steel wall studs and panels. Thin-Walled Structures, 42(4), pp. 557-573. ISSN (print) 0263-8231

Tongwei, HAN, Pengfei, HE, Wang, J and Aihui, WU (2010) The effect of vacancy defects on the tensile mechanical properties of single graphene sheets. Journal of Tongji University, 38(8), pp. 1210-1214.

Torabmostaedi, Hosein and Zhang, Tao (2014) Computational study of the effect of processing parameters on the formation and growth of ZrO2 nanoparticles in FSP process. Chemical Engineering and Processing: Process Intensification, 78, pp. 1-10. ISSN (print) 0255-2701

Torabmostaedi, Hosein (2014) Computer simulation of processing controls on the formation and growth of nanoparticles in FSP. (PhD thesis), Kingston University.

Torabmostaedi, Hosein and Zhang, Tao (2014) Numerical optimization of quenching efficiency and particle size control in flame synthesis of zro2 nanoparticles. Journal of Thermal Spray Technology, 23(8), pp. 1478-1492. ISSN (print) 1059-9630

Trunins, Jevgenijs, Curley, Andrew and Osborne, Barnaby (2012) Design of the Mars rover mobility system. Journal of the British Interplanetary Society, 65(02/03), pp. 87-97. ISSN (print) 0007-084X

Tsakiropoulos, P. and Wang, Yawei (2004) A study of particle size and velocities distributions in centrifugal atomisation using mathematical regression techniques. In: TMS 2004 : 133rd Annual Meeting & Exhibition; 14-18 Mar 2004, Charlotte, North Carolina, U.S.. (Unpublished)

Tsakiropoulos, Panos and Wang, Yawei (2003) Fundamental study of the interaction of liquids with rotating disks. In: TMS 2003: 132nd Annual International Meeting & Exhibition; 2-6 March 2003, San Diego, USA.

Tsinas, Angelos (2001) Structural considerations for volume production of constellation satellites. (MPhil thesis), Kingston University.

Tsourveloudis, Nikos C and Vitzilaios, Nikos I. (2009) UAS for Fire Management: State-of-the-art, Early Warning and Trends. In: 17th IEEE Mediterranean Conference on Control and Automation; 24-26 June 2009, Thessaloniki, Greece. ISBN 9781424446841

Turner, D, Yao, Y. and Marchant, D. (2012) Motorcycle Aerodynamic Performance Improvement through Belly Pan Design Evaluation and Testing. In: SAE 2012 World Congress; 24-26 Apr 2012, Detroit, Michigan, U.S.A..

U

Udechukwu, Izunna, Dembele, Siaka, Heidari, Ali, Volkov, Konstantin and Wen, Jennifer (2014) Investigation of liquefied natural gas (LNG) dispersion using computational fluid dynamics. In: 6th. European Conference on Computational Fluid Dynamics (ECFD VI); 20-25 Jul 2014, Barcelona, Spain.

Udechukwu, Izunna D, Dembele, Siaka, Heidari, Ali, Volkov, Konstantin N and Wen, Jennifer X (2014) Computational fluid dynamics simulation of LNG dispersion using openFOAM. In: 22nd Annual Conference of the CFD Society of Canada; 1-4 Jun 2014, Toronto, Canada.

Udechukwu, Izunna David (2015) Development of a model for computational fluid dynamics simulation of liquefied natural gas vapour dispersion. (PhD thesis), Kingston University.

Uduehi, D, Ordys, A. and Grimble, M.J. (2002) Multivariable PID controller design using online generalized predictive control optimisation. In: International conference on control applications; 18-20 Sept 2002, Glasgow, Scotland. (Proceedings of the IEEE International Conference on Control Applications, no. 1) ISSN (print) 1085-1992 ISBN 0780373863

Uduehi, D, Ordys, A. and Grimble, M. (2002) A generalized predictive control benchmark index for SISO systems. In: 41st IEEE Conference on Decision and Control; 10-13 Dec 2002, Las Vegas, USA. (Proceedings of the 41st IEEE Conference on Decision and Control, no. 2) ISSN (print) 0191-2216

Uduehi, D., Ordys, A. and Grimble, M.J. (2002) A generalized predictive control benchmark index for MIMO systems. In: IEEE International Conference on Control Applications; 18-20 Sept 2002, Glasgow, Scotland. ISSN (print) 1085-1992 ISBN 0780373863

Uduehi, Damian, Ordys, Andrzej W. and Grimble, Michael (2004) State estimation and the equivalence of the regulatory and supervisory predictive control law. In: American Control Conference; June 30- 2 July 2004, Boston, USA.

Ueno, Satoshi and Sahinkaya, Mehmet (2011) Adaptive bias current control in active magnetic bearings for energy optimization. American Society of Mechanical Engineers. (2011 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC2011)-Volume 1, Parts A & B, no. 47868)

V

Vautard, R., Maidi, M., Menut, L., Beekmann, M. and Colette, A. (2007) Boundary layer photochemistry simulated with a two-stream convection scheme. Atmospheric Environment, 41(37), pp. 8275-8287. ISSN (print) 1352-2310

Vendra, Chandra Madhav Rao (2014) Large eddy simulations of turbulent flame deflagration with wall interactions. (PhD thesis), Kingston University.

Vincent, I. F. V., Sahinkaya, M. N. and O'Shea, W. (2007) A woodpecker hammer. Journal Of Mechanical Engineering Science - Part C, 221(10), pp. 1141-1147. ISSN (print) 0954-4062

Vitzilaios, Nikos and Tsourveloudis, Nikos (2009) Safe Test Flights for Small Rotorcrafts. In: 5th International Conference on Informatics in Control, Automation and Robotics; 11–15 May, 2008, Madeira, Portugal. (Lecture Notes in Electrical Engineering, no. 37) ISSN (online) 1876-1100 ISBN 9783642002700

Vitzilaios, Nikos I. and Tourveloudis, Nikos C. (2009) An Experimental Test Bed for Small Unmanned Helicopters. Journal of Intelligent and Robotic Systems, 54(5), pp. 769-794. ISSN (print) 0921-0296

Vitzilaios, Nikos I. and Tsourveloudis, Nikos C (2008) Altitude Control of Small Helicopters Using a Prototype Test Bed. In: 5th International Conference on Informatics in Control, Automation and Robotics; 11–15 May, 2008, Madeira, Portugal. ISBN 9789898111319

Volkov, K (2014) Formulation of wall boundary conditions in turbulent flow computations on unstructured meshes. Computational Mathematics and Mathematical Physics, 54(2), pp. 353-367. ISSN (print) 0965-5425

Volkov, K (2011) Interaction of laser pulse with liquid droplet. In: 28th International Symposium on Shock Waves; 17-22 July 2011, Manchester, UK. (Unpublished)

Volkov, K. (2013) Large-eddy simulation of turbulence-induced aero-optical effects in free shear and wall bounded flows. In: Driss, Zied, (ed.) Turbulent flows: prediction, modeling and analysis. Hauppauge, U.S. : Nova Science. pp. 27-69. (Physics research and technology) ISBN 9781624177422

Volkov, K. and Emelyanov, V. (2011) Gas flows induced by fluid injection in energy systems. Moscow, Publishing House of Physical and Mathematical Literature. (In Press)

Volkov, K. N. and Emelyanov, V. N. (2013) Computational technologies in problems of gas and fluid mechanics. Moscow, Russia : BINOM Knowledge Laboratory. ISBN 9785922114387

Volkov, K. N., Emelyanov, V. N. and Zazimko, V. A. (2013) Turbulent jet: statistical models and large-eddy simulation. Moscow, Russia : Fizmatlit. 360p. ISBN 9785922115261

Volkov, K.N. and Emelyanov, V.N. (2011) Large-eddy simulation of turbulence-induced aero-optic effects in free shear flows. In: 13th European Turbulence Conference (ETC13): Statistical aspects, modelling and simulations of turbulence; 12-15 Sept 2011, Warsaw, Poland. (Journal of Physics Conference Series, no. 318) ISSN (print) 1742-6588

Volkov, K.N. (2010) Multigrid techniques as applied to gas dynamic simulation on unstructured meshes. Computational Mathematics and Mathematical Physics, 50(11), pp. 1837-1850. ISSN (print) 0965-5425

Volkov, K.N. (2009) Preconditioning of the Euler and Navier-Stokes equations in low-velocity flow simulation on unstructure grids. Computational Mathematics and Mathematical Physics, 49(10), pp. 1789-1804. ISSN (print) 0965-5425

Volkov, K.N. and Emel'yanov, V.N. (2008) Turbulent flows in channels with injection. Results of large eddy simulation and the two-equation turbulence model. Fluid Dynamics, 43(4), pp. 573-582. ISSN (print) 0015-4628

Volkov, Konstantin, ed. (2012) Efficiency, performance and robustness of gas turbines. Rijeka, Croatia : InTech Open. 238p. ISBN 9789535104643

Volkov, Konstantin (2012) Introductory chapter: overview. In: Volkov, Konstantin, (ed.) Efficiency, performance and robustness of gas turbines. Rijeka, Croatia : InTech Open. pp. 1-4. ISBN 9789535104643

Volkov, Konstantin (2010) Aero-optic effects in turbulent wall-bounded and free shear flows. Engineering Letters, 18(3), pp. 285-290. ISSN (print) 1816-093X

Volkov, Konstantin (2010) Internal turbulent two-phase flows formed by wall injection of fluid and particles. In: 5th European Conference on Computational Fluid Dynamics (ECCOMAS CFD 2010); 14-17 June 2010, Lisbon, Portugal.

Volkov, Konstantin (2010) Large-eddy simulation of free shear and wall-bounded turbulent flows. In: Lang, Peter R. and Lombargo, Frank S., (eds.) Atmospheric Turbulence, Meteorological Modelling and Aerodynamics. Hauppauge NY, U.S.A. : Nova Science. pp. 505-574. ISBN 9781607410911

Volkov, Konstantin N., Hills, Nicholas J. and Chew, John W. (2008) Simulation of turbulent flows in turbine blade passages and disc cavities. In: ASME Turbo Expo 2008: Power for Land, Sea, and Air (GT2008); 9-13 Jun 2008, Berlin, Germany. ISBN 9780791843147

W

Wang, C.J., Wen, J.X., chen, Z.B. and Dembele, S. (2014) Predicting radiative characteristics of hydrogen and hydrogen/methane jet fires using FireFOAM. International Journal of Hydrogen Energy, 39(35), pp. 20560-20569. ISSN (print) 0360-3199

Wang, C.J., Wen, J., Lu, S.X. and Guo, J. (2012) Single-step chemistry model and transport coefficient model for hydrogen combustion. Science China Technological Sciences, 55(8), pp. 2163-2168. ISSN (print) 1674-7321

Wang, C.J., Xu, S.L. and Guo, C.M. (2008) Gaseous detonation propagation in a bifurcated tube. Journal of Fluid Mechanics, 599, pp. 81-110. ISSN (print) 0022-1120

Wang, Changjian, Yan, Weigang, Guo, Jin and Guo, Changming (2011) Computer simulation of blast wall protection under methane-air explosion on an offshore platform. In: Chen, Ran, (ed.) Intelligent Computing and Information Science. Berlin Heidelberg : Springer. pp. 321-326. (Communications in Computer and Information Science, no. 135) ISBN 9783642181337

Wang, Changjian and Guo, Jin (2011) Computer simulation of liquid jet fire with various injection conditions. Procedia Engineering, 15, pp. 3942-3947. ISSN (print) 1877-7058

Wang, Changjian, Yan, Weigang, Guo, Jin and Guo, Changming (2011) Parallel computation of three dimensional gaseous detonation waves. Information: an international interdisciplinary journal, 14(3), pp. 893-898. ISSN (print) 1343-4500

Wang, J., Lu, T. J., Gault, R.I., Tian, Y. S., Li, Y., Xia, C.H. and Tan, X.C. (2008) Sound Transmission Through Lightweight Double-Leaf Partitions: Systematic Parametric Analysis,. In: 5th International conference on thin-walled structures; 18-20 June 2008, Brisbane, Australia,. ISBN 9781741072396

Wang, J., Gault, R.I., McCaughan, C., Ives, A., Tian, Y. S., Lu, T. J., He, P. and Xia, C.H. (2008) Sound transmision through lightweight double-leaf partitions: 3D modelling. In: 5th International conference on thin-walled structures; 18-20 June 2008, Brisbane, Australia,. ISBN 9781741072396

Wang, J., Lu, T.J., Woodhouse, J., Langley, R.S. and Evans, J. (2005) Sound transmission through lightweight double-leaf partitions: theoretical modelling. Journal of Sound & Vibration, 286(4-5), pp. 817-847. ISSN (print) 0022-460X

Wang, J., Tian, Y. S. and Lu, T. J. (2005) The role of frame members and sheathing in partition wall panels subject to compression. Thin-Walled Structure, 43(6), pp. 983-1002. ISSN (print) 0263-8231

Wang, Jian, Yao, Hui, Benard, Emmanuel, Cooper, Richard, Raghunathan, Srinivasan, Tweedie, James and Riordan, David (2005) Identification of aircraft noise at landing. In: 11th AIAA/CEAS Aeroacoustics Conference (26th AIAA Aeroacoustics Conference),; 23-25 May 2005, California, USA. ISBN 9781624100529

Wang, Kehao, Venetsanos, Demetrios, Wang, Jian and Pierscionek, Barbara (2016) Gradient moduli lens models : how material properties and application of forces can affect deformation and distributions of stress. Scientific Reports, 6, p. 31171. ISSN (online) 2045-2322

Wang, Pengfei, Sahinkaya, M. Necip and Akehurst, Sam (2009) Pseudo-causal tracking control of a nonminimum phase system. In: UNSPECIFIED, (ed.) ASME 2009 Dynamic Systems and Control Conference. American Society of Mechanical Engineers. pp. 289-296. ISBN 9780791848937

Wang, X.W., Guild, F.J., Kinloch, A. J., Taylor, A.C. and Hadavinia, H. (2005) Modelling the mechanical behaviour of rubber toughened epoxies. In: 28th Adhesion Society Conference; 13-16 Feb 2005, Mobile, USA. (Proceedings of the Annual Meeting - Adhesion Society) ISSN (print) 1086-9506

Wang, Y.F., Yue, Z.F. and Wang, J. (2007) Experimental and numerical study of the superelastic behaviour on NiTi thin-walled tube under biaxial loading. Computational Materials Science, 40(2), pp. 246-254. ISSN (print) 0927-0256

Wang, Y.F., Yue, Z.F. and Wang, J. (2007) Numerical study of effect of surface roughness on superelastic behaviour of shape memory alloys. Materials Science and Engineering: A, 458(1-2), pp. 312-318. ISSN (print) 0921-5093

Wang, Y.F., Yue, Z.F. and Wang, J. (2007) The effect of grain orientation on the tensile-compressive asymmetry of polycrystalline NiTi shape memory alloy. Material science and engineering technology, 38(4), pp. 294-298. ISSN (print) 0933-5137

Wang, Y.F., Roome, R.L. and Benhadj-Djilali, R. (1998) Selection of rapid prototyping manufactuirng processes. In: 14th National Conference on Manufacturing Research; 7-9 Sept 1998, Derby, UK. (Advances in manufacturing technology, no. 12) ISBN 9781860581724

Wang, YF, Roome, RL and Benhadj-Djilali, R (1998) Development of a rule based expert system for the selection of rapid prototyping processes. In: The 18th SGES International Conference on Knowledge Based Systems and Applied Artificial Intelligence; 14-16 Dec 1998, Cambridge, UK. (ES-98 (Expert Systems-98)) ISBN 1852330872

Wang, Yawei, Zhou, Peilin and Roskilly, Tony (2000) A comparison study of diesel and rapeseed methyl ester droplet vaporisation rates with a high speed video photographic technology. In: CEC/SAE Spring Fuels & Lubricants Meeting & Exposition; June 2000, Paris, France. ISSN (print) 0148-7191

Wang, Yawei (1995) Research on the predicting model for combustion process in direct injection supercharged diesel engines. Transactions of CSICE, 13(3), pp. 224-230. ISSN (print) 1000-0909

Wang, Yun-Feng (2000) The selection of rapid prototyping processes based on feature extraction from STL models. (PhD thesis), Kingston University.

Wanninayake, I. B., Dasgupta, P., Seneviratne, L. D. and Althoefer, K. (2014) Modeling and optimizing output characteristics of intensity modulated optical fiber-based displacement sensors. IEEE Transactions on Instrumentation and Measurement, 64(3), pp. 758-767. ISSN (print) 0018-9456

Wanninayake, I.B., Seneviratne, L.D. and Althoefer, K. (2014) Estimation of tissue stiffness using a prototype of air-float stiffness probe. In: IEEE International Conference on Robotics and Automation; 31 May - 7 June 2014, Hong Kong.

Wanninayake, Indika B., Dasgupta, Prokar, Seneviratne, Lakmal D. and Althoefer, Kaspar (2013) Air-float Palpation Probe for Tissue Abnormality Identification During Minimally Invasive Surgery. IEEE Transactions on Biomedical Engineering, 60(10), pp. 2735-2744. ISSN (print) 0018-9294

Welch, C.S. and Curley, A. (2005) Learning contracts for space industry staff development. In: 2nd International Conference on Recent Advances in Space Technologies (RAST 2005); 9-11 Jun2005, Istanbul, Turkey. (Proceedings of 2nd International Conference on Recent Advances in Space Technologies, 2005. RAST 2005.) ISBN 0780389778

Welch, C.S., Jack, C and Wall, R (2004) Spacefarer solar kites for solar system exploration. In: 55th International Astronautical Congress; 4 - 8 Oct 2004, Vancouver, Canada.

Welch, C.S. (1994) Electric propulsion for servicing polar platforms. In: 45th Congress of the International Astronautical Federation; 09-14 Oct 1994, Jerusalem, Israel.

Welch, CS (2000) Ascending node alteration of polar orbiting spacecraft using low-thrust propulsion. Proceedings of the Institution of Mechanical Engineers, Part G, Journal of Aerospace Engineering, 214(G5), pp. 313-321. ISSN (print) 0954-4100

Welch, Christopher (2009) The only way is up! Space propulsion systems past, present and future. In: World Space Week; 05 Oct 2009, Kingston upon Thames, U.K.. (Unpublished)

Wen, J., Ferraris, S., Hume, B., Fay, J. and Bosley, K. (2007) Computer modelling of basement fires. In: Interflam 2007: 11th International Fire Science and Engineering Conference; 3-5 Sept 2007, London, U.K.. ISBN 9780955654800

Wen, J. X., Xu, B., Dembele, S. and Tam, V. H. Y. (2008) The effect of pressure boundary rupture rate on the spontaneous ignition of pressurized hydrogen release. In: Seventh International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions; 7-11 Jul 2008, St Petersburg, Russia. (Unpublished)

Wen, J.X., Heidari, A., Ferraris, S. and Tam, V.H.Y. (2011) Numerical simulation of propane detonation in medium and large scale geometries. Journal of Loss Prevention in the Process Industries, 24(2), pp. 187-193. ISSN (print) 0950-4230

Wen, J.X., Xu, B.P., Dembele, S., Tam, V.H.Y. and Hawksworth, S.J. (2008) Numerical study on spontaneous ignition of direct release of pressurized hydrogen into air. In: 20th NHA Annual Hydrogen Conference; 30 Mar - 2 Apr 2008, Sacramento, USA. (20th NHA Annual Hydrogen Conference 2008)

Wen, J.X. and Huang, L.Y. (2000) CFD modelling of confined jet fires under ventilation-controlled conditions. Fire Safety Journal, 34(1), pp. 1-24. ISSN (print) 0379-7112

Wen, J.X., Huang, L.Y., Amin, E.M. and Nolan, P. (1998) Modeling sooting jet fires in a large-scale offshore compartment. In: 27th International Symposium on Combustion; 02-07 Aug 1998, Boulder, CO, USA. (Twenty-seventh symposium (international) on combustion, no. 1-2)

Wen, Jennifer (2012) Editorial for special issues on hydrogen safety. International Journal Of Hydrogen Energy, 37(22), p. 17350. ISSN (print) 0360-3199

Wen, Jennifer, Xu, Baopeng, Jie, Hongen, Cooper, Russel and Barnet, Julian (2011) Numerical study of compressed CO2 pipeline decompression characteristics using CFD-DECOM. In: Hazards XXII - process safety and environmental protection; 11-14 Apr 2011, Liverpool, U.K.. (Institution of Chemical Engineers Symposium Series, no. 156) ISBN 9781622767892

Wen, Jennifer (2010) Fire and explosion safety of hydrogen - from fundamental research to prevention, protection and mitigation. In: A Joint Evening Event by the Hazards Forum and The Royal Academy of Engineering: Risks Associated with Alternative Fuels; 22 Sep 2009, London, UK. (Unpublished)

Wen, Jennifer (2007) Numerical study of spontaneous ignition of pressurised hydrogen. In: 40th UKELG; 19-20 Sep 2007, Cardiff, Wales. (Unpublished)

Wen, Jennifer (2006) Under-ventilated compartment fires. In: Enclosure Fire Workshop; 30-31 May 2008, Belfast, U.K..

Wen, Jennifer, Heidari, Ali, Xu, Baopeng and Jie, Hongen (2013) Dispersion of carbon dioxide from vertical vent and horizontal releases - a numerical study. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 227(2), pp. 125-139.

Wen, Ke, Du, Fuzhou and Zhang, Xianzhi (2016) Algorithm and experiments of six-dimensional force/torque dynamic measurements based on a Stewart platform. Chinese Journal of Aeronautics, ISSN (print) 1000-9361 (Epub Ahead of Print)

Williams, J.G. and Hadavinia, H. (2005) A cohesive zone global energy analysis of an impact loaded bi-material strip in shear. In: 11th International Conference on Fracture; 20 - 25 Mar 2005, Torino, Italy. ISBN 140204626x

Williams, J.G. and Hadavinia, H. (2002) Elastic and elastic-plastic correction factors for DCB specimen. In: Neimitz, A. , Rokach, I.V. , Kocanda, D. and Golos, K., (eds.) Postconference Keynote and Plenary Lectures of Proceedings of the 14th European Conference on Fracture Krakow, 8-13th September 2002. EMAS Publishing. (European Conference on Fracture Series, no. 14) ISBN 1901537390

Winward, E., Deng, J. and Stobart, R. (2010) Innovations in experimental techniques for the development of fuel path control in diesel engines. SAE International Journal of Fuels and Lubricants, 3(1), pp. 594-613. ISSN (print) 1946-3952

Wright, S., Andrews, G. and Sabir, H. (2009) A review of heat exchanger fouling in the context of aircraft air-conditioning systems, and the potential for electrostatic filtering. Applied Thermal Engineering, 29(13), pp. 2596-2609. ISSN (print) 1359-4311

X

Xu, Y, Wang, J, Tan, X, Early, J., Curran, R, Raghunathan, S, Doherty, J and Gore, D (2008) Life cycle cost modelling for aircraft wing using object-oriented systems engineering approach. In: 46th AIAA Aerospace Sciences Meeting and Exhibit; 7 - 10 Jan 2008, Reno, Nevada.

Xu, Y ., Tan, X., Wang, J., Curran, R., Raghunathan, S., Doherty, J. and Gore, D. (2008) Manufacturing cost modeling for technology assessment. In: The 6th International Conference on Manufacturing Research; 09 - 11 Sep 2008, Uxbridge, U.K..

Xu, Yuchen, Wang, Jian, Tan, Xincai, Curran, Ricky, Raghunathan, Srinivasan, Doherty, John and Gore, Dave (2008) A generic life cycle cost modeling approach for aircraft system. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Xia, Changho, Wang, Jian and McMenemy, Karen (2010) Short, medium and long term load forecasting model and virtual load forecaster based on radial basis function neural networks. International Journal of Electrical Power & Energy Systems, 32(7), pp. 743-750. ISSN (print) 0142-0615

Xia, H, Majecki, P, Ordys, A and Grimble, M (2003) Controller benchmarking based on economic benefits. In: European control conference; ECC'03; 1-4 September 2003, Cambridge, UK.

Xia, Hao, Majecki, Paweli, Ordys, Andrzej W. and Grimble, Michael John (2004) Performance Assessment of MIMO Systems under Partial Information. In: American Control Conference; June 30- 2 July 2004, Boston, USA.

Xia, Hap, Majecki, Pawel, Ordys, Andrzej and Grimble, Mike (2005) Calculating setpoint range under actuator saturation and stochastic disturbance. In: IEEE Conference on Control Applications; 28-31 August 2005, Toronto, Canada.

Xing, F., Zhang, S. and Yao, Y. (2012) Numerical Simulation of Shock-Induced-Combustion in Three-Dimensional HyShot Scramjet Model. In: 50th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition 2012; 9-10 Jan 2012, Nashville, Tennessee.

Xu, B.P, Zhang, J.P., Wen, J.X., Dembele, S. and Karwatzki, J. (2005) Numerical study of a highly under-expanded hydrogen jet. In: International Conference on Hydrogen Safety; 8-10 September 2005, Pisa, Italy. (Unpublished)

Xu, B.P. and Wen, J.X. (2014) The effect of tube internal geometry on the propensity to spontaneous ignition in pressurized hydrogen release. International Journal Of Hydrogen Energy, 39(35), pp. 20503-20508. ISSN (print) 0360-3199

Xu, B.P., Chen, Z.B., Wen, J.X., Zhubrin, S., Dembele, S., Wang, Y. and Dorofeev, S. (2010) Large eddy simulation of a one meter diameter methane fire using the extended discrete reaction model. In: Sixth International Seminar on Fire and Explosion Hazards; 11-16 April 2010, Leeds, UK. (Unpublished)

Xu, B.X., Yue, Z.F. and Wang, J. (2007) Indentation fatigue behaviour of polycrystalline copper. Mechanics of Materials, 39(12), pp. 10667-1080. ISSN (print) 0167-6636

Xu, Baopeng, Wen, Jennifer, Dembele, Siaka and Tam, Vincent (2008) Predicting spontaneous ignition of under-expanded hydrogen jets: the issue of numerical accuracy. In: Thirty-Second International Symposium on Combustion; 03 - 08 Aug 2008, Montreal, Canada. (Unpublished)

Xu, Hu, Bao, Yuqing, Gawne, David T. and Zhang, Tao (2016) Process control for thermal-spray deposition of thermoset coatings using computer simulation. Progress in Organic Coatings, 101, pp. 407-415. ISSN (print) 0300-9440

Y

Yao, H., Butterfield, J., Raghunathan, S., Wang, J., Cooper, R. and Benard, E. (2005) Optimization design for thrust reverser cascade with a view to reduce noise. Multidiscipline Modelling in Materials and Structures, 1(1), pp. 63-72. ISSN (print) 1573-6105

Yao, J and Yao, Y F (2011) Computational study of hole shape effect on film cooling performance. Journal Of Power And Energy - Part A, 225(4), pp. 505-519. ISSN (print) 0957-6509

Yao, J., Sian, S., Khan, J. and Yao, Y. (2010) Effect of hole shape on blade cooling effectiveness. In: AIAA 48th Aerospace Sciences Meeting; 04-07 Jan 2010, Orlando, FL, USA.

Yao, J., Mouzoun, O., Yao, Y. and Mason, P. (2009) Unsteady RANS calculation of flow over Ahmed car model. In: IUTAM Symposium on Unsteady Separated Flows and their Control; 11 - 22 June 2007, Corfu, Greece. ISBN 9781402098970

Yao, J., Yao, Y., Mason, P.J. and Zhang, T. (2008) CFD modelling of water injection flow for turbine blades cleaning. In: 2nd International Symposium on Physics of Fluids; 09 - 12 Jun 2008, Nanjing, China.

Yao, J., Yao, Y.F., Manson, P.J., Zhang, T., Heyes, F.J.G. and Roach, P.E. (2007) Computational prediction of local distorted flow in turbocharger. In: 5th International Conference on Fluid Mechanics; 15-19 Aug 2007, Shanghai, Peoples Republic of China. (New trends in fluid mechanics research: proceedings of the fifth international conference on fluid mechanics) ISBN 9787302158943

Yao, J., Mouzoun, O., Yao, Y. and Mason, P. (2007) Unsteady RaNS simulation of flow over Ahmed car model. In: IUTAM Symposium Unsteady Separated Flows and their Control; 18 - 22 June 2007, Corfu, Greece. ISBN 9781402098970

Yao, J., Yao, Y.F., Patel, M.K. and Mason, P.J. (2006) Numerical simulation of microchannel cooling and heat transfer. In: 13th International Heat Transfer Conference; 13 - 18 Aug 2006, Sydney, Australia.

Yao, Jun (2010) Numerical and experimental studies of gas/liquid two-phase flow in a turbocharger. (PhD thesis), Kingston University.

Yao, Jun, Sian, Sohan, Yao, Y. and Davis, A.W. (2010) Numerical study of hole shape effect on blade cooling effectiveness. Modern Physics Letters B, 24(13), pp. 1295-1298. ISSN (print) 0217-9849

Yao, Jun, Yao, Yufeng, Mason, Peter, Zhang, Tao, Heyes, F. J. G. and Roach, P. E. (2009) CFD modelling of water injection for turbine blade cleaning. Modern Physics Letters B, 23(3), pp. 341-344. ISSN (print) 0217-9849

Yao, Jun, Yao, Yufeng, Mason, Peter J and Patel, Mayur K (2009) Numerical simulation of heat transfer in rectangular microchannel. Advances in Applied Mathematics and Mechanics, 1(2), pp. 231-241. ISSN (print) 2070-0733

Yao, Jun, Yao, Yufeng, Mason, Peter, Zhang, Tao, Heyes, F. J. G. and Roach, P. E. (2009) Simulation of gas water two-phase flow in diesel turbocharger. In: 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion (ISMF2009); 11-15 Jul 2009, Xi'an, China. (Unpublished)

Yao, Jun, Yao, Yufeng, Mason, Peter and Zhang, Tao (2008) The CFD modelling of water injection flow in turbocharger. In: The Fifth International Conference on Computational Fluid Dynamics (ICCFD5); 7-11 July 2008, Seoul, Korea. (Submitted)

Yao, Jun, Yao, Yufeng, Patel, Mayur and Mason, Peter (2007) On Reynolds number and scaling effects in microchannel flows. The European Physical Journal - Applied Physics, 37(2), pp. 229-235. ISSN (print) 1286-0042

Yao, Jun, Patel, Mayur K., Yao, Yufeng and Mason, Peter J. (2006) Numerical simulation of heat transfer in rectangular microchannel. In: European Conference on Computational Fluid Dynamics; 5 - 8 Sept 2006, Egmond aan Zee, The Netherlands.

Yao, Y. and Maidi, M. (2011) Direct numerical simulation of single and multiple square jets in cross-flow. Journal of Fluids Engineering, 133(3), 031201. ISSN (print) 0098-2202

Yao, Y., Salin, A and Lo, S. (2011) Numerical analysis of wall properties in crossing-shock-qave/turbulent-boundary-layer interactions. In: 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition; 4 - 7 Jan 2011, Orlando, U.S.A..

Yao, Y. and Amos, I.G. (2010) The effect of variable gas property on axial turbine performance. International Journal of Engineering Systems Modelling and Simulations, 2(3), pp. 190-198. ISSN (print) 1755-9758

Yao, Y., Petty, D., Barrington, P., Yao, J. and Mason, P. (2006) Direct numerical simulation of jets in cross-flow. International Journal of Computational Fluid Dynamics, 20(5), pp. 279-285. ISSN (print) 1061-8562

Yao, Y.F., Savill, A.M., Sandham, N.D. and Dawes, W.N. (2002) Simulation and modelling of turbulent trailing-edge flow. Flow, Turbulence and Combustion - (formerly Applied Scientific Research), 68(4), pp. 313-333. ISSN (print) 1386-6184

Yao, Yufeng, Salin, Andrea and Lo, Sing H. (2011) Numerical analysis of wall properties in crossing-shock-wave/turbulent-boundary-layer interactions. AIAA Journal, 2011(860), ISSN (print) 0001-1452 (Submitted)

Yao, Yufeng and Yao, Jun (2011) The effect of hole shape on blade cooling effectiveness. International Journal of Engineering Systems Modelling and Simulations, 2(4), pp. 242-248. ISSN (print) 1755-9758

Yao, Yufeng (2009) Direct numerical simulation of multiple jets in cross-flow. In: The Second International Symposium on Physics of Fluids (ISPF2); 9-12 Jun 2008, Jiuzhaigou, China. (Unpublished)

Yao, Yufeng (2009) Direct simulation of flow interactions in multiple jets in cross-flow. Modern Physics Letters B, 23(3), pp. 249-252. ISSN (print) 0217-9849

Yao, Yufeng (2009) Effect of hole shape on blade cooling effectiveness. In: World Congress on Engineering 2009 (WCE 2009); 1-3 Jul 2009, London, UK. (Unpublished)

Yao, Yufeng and Castagna, Jony (2009) Numerical study of laminar jet interacting with turbulent cross-flow. In: Sixth International Symposium On Turbulence, Heat and Mass Transfer; 14-18 Sep 2009, Rome, Italy.

Yao, Yufeng (1996) High order resolution and parallel implementation on unstructured grids. (PhD thesis), University of Glasgow.

Youssef, A, Ordys, A.W. and Grimble, M (2004) Nonlinear predictive control for fast constrained systems. In: 10th IEEE International Conference on Methods and Models in Automation and Robotics; 30 Aug - 02 Sept 2004, Miedzyzdroje, Poland.

Youssef, A, Grimble, M, Ordys, A, Dutka, A and Anderson, D (2003) Robust nonlinear predictive flight control. In: European control conference; ECC'03; 1-4 September 2003, Cambridge, UK.

Youssef, A, Ordys, A and Grimble, M (2003) A comparison of nonlinear predictive control techniques for a ducted fan model. In: Methods and Models in Automation and Robotics; 25-28 Aug 2003, Miedzyzdroje, Poland. ISBN 9788388764776

Yu, K., Yue, Z. and Wang, J. (2007) Parametric modelling and multidisciplinary design optimization of 3-D internally cooled turbine blades. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Z

Zanjirani Farahani, R., Laporte, G. and Sharifyazdi, M. (2005) A practical exact algorithm for the shortest loop design problem in a block layout. International Journal of Production Research, 43(9), pp. 1879-1887. ISSN (print) 0020-7543

Zanjirani Farahani, R. Z., Pourakbar, M. and Miandoabchi, E. (2007) Developing exact and Tabu search algorithms for simultaneously determining AGV loop and P/D stations in single loop systems. International Journal of Production Research, 45(22), pp. 5199-5222. ISSN (print) 0020-7543

Zanjirani Farahani, Reza, Laporte, Gilbert, Miandoabchi, Elnaz and Bina, Saman (2008) Designing efficient methods for the tandem AGV network design problem using Tabu search and genetic algorithm. The International Journal of Advanced Manufacturing Technology, 36(9-10), pp. 996-1009. ISSN (print) 0268-3768

Zanjirani Farahani, Reza, Karimi, Behrooz and Tamadon, Sara (2007) Designing an efficient method for simultaneously determining the loop and the location of the P/D stations using genetic algorithm. International Journal of Production Research, 45(6), pp. 1405-1427. ISSN (print) 0020-7543

Zhang, J, Zu, B.P., Dembele, S and Wen, J.X. (2007) Exploratory study of under-expanded sonic hydrogen jets and the resulting jet flames. In: 5th International Seminar on Fire and Explosion Hazards; April 2007, Edinburgh, UK.

Zhang, J., Dembele, S. and Wen, J.X. (2005) Effect of radiation models on CFD simulations of upward flame spread. Fire Safety Science, 8, pp. 421-432.

Zhang, J., Ferraris, S., Dembele, S., Wen, J., Goransson, U., Petersson, P. and Holmstedt, G (2004) Numerical and experimental investigation of flame spread over a PMMA surface. In: Fire Science and Engineering Conference; Interflam 2004; 5-7 July 2004, Edinburgh, Scotland. ISBN 0954121635

Zhang, T, Evans, JRG and Bevis, MJ (1998) On the heat balance during double-gated, modulated-pressure injection moulding. International Journal of Heat and Mass Transfer, 41(6-7), pp. 963-974. ISSN (online) 0017-9310

Zhang, T, Gawne, DT and Bao, Y (1997) The influence of process parameters on the degradation of thermally sprayed polymer coatings. Surfaces and Coatings Technology, 96(2-3), pp. 337-344. ISSN (online) 0257-8972

Zhang, T., Bao, Y., Gawne, D.T. and Mason, P.J. (2011) Effect of a moving flame on the temperature of polymer coatings and substrates. Progress in Organic Coatings, 70(1), pp. 45-51. ISSN (print) 0300-9440

Zhang, T., Liu, B., Bao, Y. and Gawne, D.t. (2004) Process optimisation of plasma spraying using statistical modelling. In: International Thermal Spray Conference; 10-12 May 2004, Osaka, Japan. (Proceedings of the International Thermal Spray Conference)

Zhang, T., Liu, B., Gawne, D.T. and Bao, Y. (2003) Model of thermal spraying using a Monte-Carlo approach. In: 2003 International Thermal Spray Conference; 5-8 May 2003, Orlando, Florida, USA. (Thermal Spray 2003 Advancing the Science and Applying the Technology) ISBN 0871707853

Zhang, T., Liu, B., Gawne, D.T. and Bao, Y. (2001) Computer simulation of shrouding on the profile of a plasma jet. In: International Thermal Spray Conference; 28-30 May 2001, Singapore, Singapore. (Proceedings of the International Thermal Spray Conference)

Zhang, T., Gawne, D.T. and Liu, B. (2000) Computer modelling of the influence of process parameters on the heating and acceleration of particles during plasma spraying. Surface and Coatings Technology, 132(2-3), pp. 233-243. ISSN (print) 0257-8972

Zhang, T., Bao, Y. and Gawne, D.T. (2000) Temperature profiles and thermal stress analysis of plasma sprayed glass-composite coatings. In: 1st International Thermal Spray Conference; 8-11 May 2000, Montreal, Quebec, Canada. (Proceedings of the 1st International Thermal Spray Conference)

Zhang, T., Evans, J.R.G. and Bevis, M. (1999) Relaxation patterns in powder injection mouldings made with repeated flow reversals. Journal of the European Ceramic Society, 19(4), pp. 411-417. ISSN (print) 0955-2219

Zhang, T., Blackburn, S. and Bridgwater, J. (1997) Orientation of binders and particles during ceramic injection moulding. Journal of the European Ceramic Society, 17(1), pp. 101-108. ISSN (print) 0955-2219

Zhang, T., Evans, J.R.G. and Bevis, M. (1996) Control of orientation in short fibre-reinforced metal matrix composites. International Journal of Powder Metallurgy, 32(4), pp. 331-339. ISSN (print) 0888-7462

Zhang, T., Blackburn, S. and Bridgwater, J. (1996) Debinding and sintering defects from particle orientation in ceramic injection moulding. Journal of Materials Science, 31(22), pp. 5891-5896. ISSN (print) 0022-2461

Zhang, T., Evans, J.R.G. and Woodthorpe, J. (1995) Injection moulding of silicon carbide using an organic vehicle based on a preceramic polymer. Journal of the European Ceramic Society, 15(8), pp. 729-734. ISSN (print) 0955-2219

Zhang, T., Blackburn, S. and Bridgwater, J. (1994) The properties of ceramic suspensions for injection moulding based on agar water solution binders. British Ceramic Transactions, 93(6), pp. 229-233. ISSN (print) 0967-9782

Zhang, T. and Evans, J.R.G. (1993) Computation of volume flow in modulated pressure ceramic injection moulding. Ceramic International, 19(6), 367 - 373. ISSN (print) 0272-8842

Zhang, T., Evans, J.R.G. and Rees, D.W.A. (1992) The heating effect of electrical resistance strain gauges applied to low thermal conductivity materials. Strain, 28(3), 107 - 112.

Zhang, T. and Evans, J.R.G. (1991) Mechanical properties of injection moulding suspensions as a function of ceramic volume fraction and temperature. Journal of the European Ceramic Society, 7(3), pp. 155-163. ISSN (print) 0955-2219

Zhang, Tao, Evans, J.R.D and Bevis, M. (1996) The control of fibre orientation in ceramic and metal composites by open-ended injection moulding. Composites Science and Technology, 56(8), pp. 921-928. ISSN (print) 0266-3538

Zhou, P.L., Wang, Yawei and Roskilly, T. (2000) An investigation of droplet size and distribution in DI diesel sprays using laser PDA and mathematical regression techniques. Transactions - Institute of Marine Engineers, 112(3/4), pp. 103-113. ISSN (print) 0020-2924

Zhu, X, Zhang, T., Marchant, D. and Morris, V. (2011) The structure and properties of NiAl formed by SHS using induction heating. Materials Science and Engineering A, 528(3), pp. 1251-1260. ISSN (print) 0921-5093

Zhu, X., Zhang, T., Morris, V. and Marchant, D. (2010) Combustion synthesis of NiAl/Al2O3 composites by induction heating. Intermetallics, 18(6), pp. 1197-1204. ISSN (print) 0966-9795

Zhu, Xiaomeng, Zhang, Tao, Marchant, Denis and Morris, Valerie (2012) Combustion synthesis of Ni/Al base composites. Advanced Materials Research, 545, pp. 50-55. ISSN (print) 1022-6680

Zhu, Xiaomeng (2010) Combustion synthesis of Ni, Al and NiAl based composites by induction heating. (PhD thesis), Kingston University.

Zia, M.T, Curley, A., Duran, O. and Razmkhah, O. (2011) Application of LabView and cRIO for high precision positioning of Mars Rover using DC motors. In: 2nd International Conference on Space Technology (ICST 2011); 15-17 Sep 2011, Athens, Greece. (Unpublished)

Zweiri, Y. H. and Seneviratne, L. D. (2006) Diesel engine indicated and load torque estimation using a non-linear observer. Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 220(6), pp. 775-785. ISSN (print) 0954-4070

Zweiri, Y. H., Whidborne, J. F. and Seneviratne, L. D. (2003) A three-term backpropagation algorithm. Neurocomputing, 50, 305 - 318. ISSN (print) 0925-2312

Zweiri, Y. H., Whidborne, J. F., Seneviratne, L. D. and Althoefer, K. (2002) A comparison of dynamic models of various complexity for diesel engines. Mathematical and Computer Modelling of Dynamical Systems, 8(3), 273 - 289. ISSN (print) 1387-3954

Zweiri, Y. H., Whidborne, J. F. and Seneviratne, L. D. (2001) Detailed analytical model of a single-cylinder diesel engine in the crank angle domain. Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 215(D11), 1197 - 1216. ISSN (print) 0954-4070

Zweiri, Y. H., Whidborne, J. F. and Seneviratne, L. D. (2000) Instantaneous friction components model for transient engine operation. Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 214(D7), 809 - 824. ISSN (print) 0954-4070

Zweiri, Y.H., Seneviratne, L.D and Althoefer, K. (2004) Identification methods for excavator arm parameters. In: SICE 2004 Annual Conference; 4-6 Aug 2004, Sapporo, Japan.

Zweiri, Y.H., Seneviratne, L.D. and Althoefer, K. (2002) Modelling and Control of Heavy Duty Vehicles for Excavation Tasks. In: IASTED International Conference on Control and Applications; 20-22 May 2002, Cancun, Mexico.

Zweiri, Yahya, Whidborne, J. F. and Seneviratne, L. D. (1999) Dynamic simulation of a single-cylinder diesel engine including dynamometer modelling and friction. Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 213(4), pp. 391-402. ISSN (print) 0954-4070

Zweiri, Yahya H. (2008) Identification schemes for unmanned excavator arm parameters. International Journal of Automation and Computing, 5(2), pp. 185-192. ISSN (print) 1476-8186

Zweiri, Yahya H. and Seneviratne, Lakmal D. (2007) Diesel engine indicated torque estimation based on artificial neural networks. In: IEEE/ACS International Conference on Computer Systems and Applications (AICCSA); 13 - 16 May 2007, Amman, Jordan. (IEEE/ACS International Conference on Computer Systems and Applications, no. 2007) ISBN 1424410304

Zweiri, Yahya H., Seneviratne, Lakmal D. and Althoefer, Kaspar (2006) Modelling of closed-chain manipulators on an excavator vehicle. Mathematical and Computer Modelling of Dynamical Systems, 12(4), 329 - 345. ISSN (print) 1387-3954

Zweiri, Yahya H., Lakmal D. Seneviratne, Lakmal D. and Althoefer, Kaspar (2005) Stability analysis of a three-term backpropagation algorithm. Neural Networks, 18(10), 1341 - 1347. ISSN (print) 0893-6080

Zweiri, Yahya H., Whidbourne, James F. and Seneviratne, Lakmal D. (2000) Numerical inversion of the dynamic model of a single-cylinder diesel engine. Communications in Numerical Methods in Engineering, 16(7), 505 - 517. ISSN (print) 1069-8299

This list was generated on Tue Feb 14 03:59:17 2017 GMT.