Items where Faculty is "Faculty of Science, Engineering and Computing > School of Mechanical and Automotive Engineering"

Kingston University Faculties, Schools and Research Centres (22165)
- Faculty of Science, Engineering and Computing (2354)
  - School of Mechanical and Automotive Engineering (222)

Group by: First Author/Editor | Item Type | Year | No Grouping

Number of items at this level: 222.

Article

Ahmadi, H, Liaghat, GH. and Hadavinia, H. (2016) Investigation on tensile properties of plain and nanoclay reinforced syntactic foams. International Journal of Composite Materials, 6(1), pp. 34-41. ISSN (print) 2166-479X

Ahmadi, H, Liaghat, GH, Shokrieh, M M, Hadavinia, H, Ordys, A and Aboutorabi, A (2015) Quasi-static and dynamic compressive properties of ceramic microballoon filled syntactic foam. Journal of Composite Materials, 49(10), pp. 1255-1266. ISSN (print) 0021-9983

Ahmadi, H., Liaghat, G.H., Shokreih, M. M., Aboutorabi, A., Hadavinia, H. and Ordys, A. (2014) Compressive properties of nanoclay-reinforced syntactic foams at quasi-static and high strain rate loading. Polymer-Plastics Technology and Engineering, 53(10), pp. 990-999. ISSN (print) 0360-2559

Al-Ja'afreh, T., Zweiri, Y., Seneviratne, L. and Althoefer, K. (2008) A new soft-tissue indentation model for estimating circular indenter 'force-displacement' characteristics. Institution of Mechanical Engineers. Proceedings. Part H: Journal of Engineering in Medicine, 222(1), 805 - 815. ISSN (print) 0954-4119

Al-Khazali, H. A. H. and Askari, M. R. (2011) Experimental technique to investigate vibration monitoring in revolving structures using oscilloscopic/modal testing. International Journal of Engineering Science and Technology, 3(10), pp. 7799-7814. ISSN (online) 0975-5462

Al-Khazali, H.A. and Askari, M.R. (2011) Modal analysis design to exposure gyroscopic effect in rotating machinery using experimental and analytical/computational techniques. International Journal of Engineering Science and Technology, 3(9), pp. 7234-7243. ISSN (online) 0975-5462

Al-Khazali, Hisham A. and Askari, Mohamad R. (2011) Computer simulation to investigate system identification and vibration monitoring in rotor dynamic analysis. International Journal of Advances in Science and Technology, 3(4), pp. 1-15. ISSN (print) 2229-5216

Al-Khudairi, O., Hadavinia, H., Waggott, A., Lewis, E. and Little, C. (2015) Characterising Mode I/Mode II Fatigue Delamination Growth in Unidirectional Fibre Reinforced Polymer Laminates. Materials & Design, 66(A), pp. 93-102. ISSN (print) 0264-1275

Althoefer, K., Lara, B., Zweiri, Y. H. and Seneviratne, L. D. (2008) Automated failure classification for assembly with self-tapping threaded fastenings using artificial neural networks. Journal Of Mechanical Engineering Science - Part C, 222(6), pp. 1081-1095. ISSN (print) 0954-4062

Althoefer, Kaspar, Tan, Choo Par, Zweiri, Yahya H. and Seneviratne, Lakmal D. (2009) Hybrid soil parameter measurement and estimation scheme for excavation automation. IEEE Transactions on Instrumentation and Measurement, 58(10), pp. 3633-3641. ISSN (print) 0018-9456

Alvarenga, Jessica, Vitzilaios, Nikolaos I, Rutherford, Matthew J. and Valavanis, Kimon P (2015) Survey of Unmanned Helicopter Model-Based Navigation and Control Techniques. Journal of Intelligent and Robotic Systems, 80(1), pp. 87-138. ISSN (print) 0921-0296

Augousti, Andy T. and Pierscionek, Barbara K. (2016) Gravity does not affect accommodative amplitude. Investigative Opthalmology & Visual Science, 57(11), p. 4570. ISSN (online) 1552-5783

Ayten, K. Koray, Sahinkaya, M. Necip and Dumlu, Ahmet (2016) Optimum trajectory generation for redundant/hyper-redundant manipulators. IFAC-PapersOnLine, 49(21), pp. 493-500. ISSN (online) 2405-8963

Bao, Yuqing, Zhang, Tao and Gawne, David T. (2012) Process modelling of thermal spraying for thermoset coatings. Progress in Organic Coatings, 73(2-3), pp. 225-231. ISSN (print) 0300-9440

Barbosa, Luiz Filipe, Trunins, Jevgenijs, Zweiri, Yahya H., Claus, Malcolm and Kamm, Niklaus (2015) Development and testing of the Mars Rover Mobility Platform for educational and research purposes. IARJSET, 2(10), pp. 99-104. ISSN (print) 2394-1588

Bulat, P.V., Ilyina, T.E., Volkov, K.N., Silnikov, M.V. and Chernyshov, M.V. (2016) Interaction of a shock wave with an array of particles and effect of particles on the shock wave weakening. Acta Astronautica, ISSN (print) 0094-5765 (Epub Ahead of Print)

Burrows, C. R., Keogh, P. S. and Sahinkaya, M. N. (2009) Progress towards smart rotating machinery through the use of active bearings. Journal Of Mechanical Engineering Science - Part C, 223(12), pp. 2849-2860. ISSN (print) 0954-4062

Burrows, C.R. and Sahinkaya, M.N. (1985) Assessment of techniques for estimating oil-film bearing coefficients. Tribology International, 18(5), pp. 267-274. ISSN (print) 0301-679X

Burrows, C.R., Sahinkaya, M.N., Kucuk, N.C. and Tong, M.L. (1988) Comparison of algorithms for in situ estimation of squeeze-film bearing characteristics. Journal Of Tribology, 110(2), pp. 382-385. ISSN (print) 0742-4787

Burrows, C.R. and Sahinkaya, M.N. (1982) Frequency-domain estimation of linearized oil-film coefficients. Journal of Lubrication Technology, 104(2), pp. 210-215. ISSN (print) 0022-2305

Burrows, C.R., Sahinkaya, M.N. and Kucuk, N.C. (1986) Modeling of oil-film forces in squeeze-film bearings. Journal Of Tribology, 108(2), pp. 262-269. ISSN (print) 0742-4787

Burrows, C.R., Sahinkaya, M.N. and Turkay, O.S. (1984) An adaptive squeeze-film bearing. Journal Of Tribology, 106(1), pp. 145-151. ISSN (print) 0742-4787

Burrows, C.R. and Sahinkaya, M.N. (1983) A modified algorithm for determining structural controllability. International Journal of Control, 37(6), pp. 1417-1431. ISSN (print) 0020-7179

Burrows, C.R. and Sahinkaya, M.N. (1981) A new algorithm for determining structural controllability. International Journal of Control, 33(2), pp. 379-392. ISSN (print) 0020-7179

Cade, Iain S., Keogh, Patrick .S. and Sahinkaya, M.Necip (2005) Fault identification in rotor/magnetic bearing systems using discrete time wavelet coefficients. IEEE/ASME Transactions on Mechatronics, 10(6), pp. 648-657. ISSN (print) 1083-4435

Cade, Iain S., Sahinkaya, M. Necip, Burrows, Clifford R. and Keogh, Patrick S. (2009) On the use of actively controlled auxiliary bearings in magnetic bearing systems. Journal Of Engineering For Gas Turbines And Power, 131(2), 022507. ISSN (print) 0742-4795

Cade, Iain S., Keogh, Patrick S. and Sahinkaya, M. Necip (2007) Rotor/active magnetic bearing transient control using wavelet predictive moderation. Journal of Sound and Vibration, 302(1-2), pp. 88-103.

Cade, Iain S., Keogh, Patrick S. and Sahinkaya, M. Necip (2006) Transient rotor/active magnetic bearing control using sampled wavelet coefficients. Journal of Engineering for Gas Turbines and Power, 129(2), 549- 555. ISSN (print) 0742-4795

Cade, Iain S., Sahinkaya, M. Necip, Burrows, Clifford R. and Keogh, Patrick S. (2010) An active auxiliary bearing control strategy to reduce the onset of asynchronous periodic contact modes in rotor/magnetic bearing systems. Journal of Engineering for Gas Turbines and Power, 132(5),

Cedillos-Barraza, Omar, Manara, Dario, Boboridis, Konstantinos, Watkins, Tyson, Grasso, Salvatore, Jayaseelan, Daniel, Konings, Rudy, Reece, Michael and Lee, William (2016) Investigating the highest melting temperature materials : a laser melting study of the TaC-HfC system. Scientific Reports, 6, p. 37962. ISSN (online) 2045-2322

Chan, K. Y., Ordys, A., Duran, O., Volkov, K. and Deng, J. (2014) Minimizing engine emissions using state-feedback control with LQR and artificial intelligence fuel estimator. International Journal of Innovative Research in Science, Engineering and Technology, 2(3), pp. 1-9. ISSN (print) 2319-8753

Cole, M. O. T., Keogh, P. S., Burrows, C. R. and Sahinkaya, M. N. (2006) Adaptive control of rotor vibration using compact wavelets. Journal Of Vibration And Acoustics, 128(5), pp. 653-665. ISSN (print) 1048-9002

Cole, Matthew O.T., Keogh, Patrick S., Sahinkaya, Mehmet N. and Burrows, Clifford R. (2004) Towards fault-tolerant active control of rotor-magnetic bearing systems. Control Engineering Practice, 12(4), pp. 491-501. ISSN (print) 0967-0661

Cox, Sophie C, Jamshidi, Parastoo, Eisenstein, Neil M, Webber, Mark A, Hassanin, Hany, Attallah, Moataz M, Shepherd, Duncan E T, Addison, Owen and Grover, Liam M (2016) Adding functionality with additive manufacturing : fabrication of titanium-based antibiotic eluting implants. Materials Science & Engineering C - Materials for Biological Applications, 64, pp. 407-415. ISSN (print) 0928-4931

D'Arsie, Lorenzo, Esconjauregui, Santiago, Weatherup, Robert S., Wu, Xingyi, Arter, William E., Sugime, Hisashi, Cepek, Cinzia and Robertson, John (2016) Stable, efficient p-type doping of graphene by nitric acid. RSC Advances, 6(114), pp. 113185-113192. ISSN (online) 2046-2069

Davar, A., Khalili, S.M.R. and Hadavinia, H. (2013) Free vibrations of functionally graded circular cylindrical shells under internal pressure. International Journal of Advanced Design and Manufacturing Technology, 6(4), pp. 49-58. ISSN (print) 2252-0406

Deng, Jiamei (2013) Dynamic neural networks with hybrid structures for nonlinear system identification. Engineering Applications of Artificial Intelligence, 26(1), pp. 281-292. ISSN (print) 0952-1976

Deng, Jiamei, Maass, B. and Stobart, R. (2012) Minimum data requirement for neural networks based on power spectral density analysis. IEEE Transactions on Neural Networks and Learning Systems, 23(4), pp. 587-595. ISSN (print) 2162-237X

Dinkelacker, F., Manickam, B. and Muppala, S.P.R. (2011) Modelling and simulation of lean premixed turbulent methane/hydrogen/air flames with an effective Lewis number approach. Combustion and Flame, 158(9), pp. 1742-1749. ISSN (print) 0010-2180

Dogan, Fatih, Hadavinia, Homayoun, Donchev, Todor and Bhonge, Prasannakumar S. (2012) Delamination of impacted composite structures by cohesive zone interface elements and tiebreak contact. Central European Journal of Engineering, 2(4), pp. 612-626. ISSN (print) 1896-1541

Dombrovskiy, Leonid A., Dembele, Siaka and Wen, Jennifer X. (2016) Shielding of fire radiation with the use of multi-layered water mist curtains : preliminary estimates. Computational Thermal Sciences, 8(4), pp. 371-380. ISSN (print) 1940-2503

Dombrovsky, Leonid A., Dembele, Siaka and Wen, Jennifer (2016) A simplified model for the shielding of fire thermal radiation by water mists. International Journal of Heat and Mass Transfer, 96, pp. 199-209. ISSN (print) 0017-9310

Domun, Nadiim, Hadavinia, H., Zhang, T., Sainsbury, T., Liaghat, G.H. and Vahid, S. (2015) Improving the fracture toughness and the strength of epoxy using nanomaterials : a review of the current status. Nanoscale, 7(23), pp. 10294-10329. ISSN (print) 2040-3364

Drew, B., Plummer, A. R. and Sahinkaya, M. N. (2009) A review of wave energy converter technology. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 223(8), pp. 887-902. ISSN (online) 2041-2967

Duc, Nguyen Dinh, Hadavinia, Homayoun, Thu, Pham Van and Quan, Tran Quoc (2015) Vibration and nonlinear dynamic response of imperfect three-phase polymer nanocomposite panel resting on elastic foundations under hydrodynamic loads. Composite Structures, 131, pp. 229-237. ISSN (print) 0263-8223

Duran, Olga (2012) Multi sensor platforms for sewer inspection. Water and Sewerage Journal, 3, p. 17.

Duran, Olga and Petrou, Maria (2011) Robust endmember extraction in the presence of anomalies. IEEE Transactions on Geoscience and Remote Sensing, 49(6), pp. 1986-1996. ISSN (print) 0196-2892

Duran, Olga and Petrou, Maria (2014) Subpixel temporal spectral imaging. Pattern Recognition Letters, 48, pp. 15-23. ISSN (print) 0167-8655

El-Sayed, M. A., Hassanin, Hany and Essa, Khamis (2016) Bifilm defects and porosity in Al cast alloys. The International Journal of Advanced Manufacturing Technology, ISSN (print) 0268-3768 (In Press)

El-Sayed, M. A., Hassanin, Hany and Essa, Khamis (2015) Effect of casting practice on the reliability of Al cast alloys. International Journal of Cast Metals Research, The, ISSN (print) 1364-0461 (In Press)

Elmarakbi, Ahmed, Fielding, Niki and Hadavinia, Homayoun (2011) Finite element simulation of axial crush of thin-walled tubes with different cross-sections: vehicle/pole impact applications. International Journal of Vehicle Structures and Systems, 3(3), ISSN (print) 0975-3060

Emelyanov, V.N., Teterina, I.V., Volkov, K.N. and Garkushev, A.U. (2016) Pressure oscillations and instability of working processes in the combustion chambers of solid rocket motors. Acta Astronautica, ISSN (print) 0094-5765 (Epub Ahead of Print)

Essa, Khamis, Khan, Raja, Hassanin, Hany, Attallah, Moataz M. and Reed, Roger (2015) An iterative approach of hot isostatic pressing tooling design for net-shape IN718 superalloy parts. The International Journal of Advanced Manufacturing Technology, ISSN (print) 0268-3768 (Epub Ahead of Print)

Fountas, N., Vaxevanidisa, N., Stergiou, C. and Benhadj-Djilali, R. (2015) Evaluation of 3- and 5-axis sculptured surface machining in CAM environment through design of experiments. International Journal of Computer Integrated Manufacturing, 28(3), pp. 278-296. ISSN (print) 0951-192X

Fountas, N. A., Vaxevanidis, N. M., Stergiou, C. I. and Benhadj-Djilali, R. (2016) A virus-evolutionary multi-objective intelligent tool path optimization methodology for 5-axis sculptured surface CNC machining. Engineering with Computers, ISSN (print) 0177-0667 (Epub Ahead of Print)

Fountas, Nikolaos, Vaxevanidis, Nikolaos, Stergiou, Constantinos and Benhadj-Djilali, Redha (2014) Development of a software-automated intelligent sculptured surface machining optimization environment. The International Journal of Advanced Manufacturing Technology, 75(5-8), pp. 909-931. ISSN (print) 0268-3768

Fountas, Nikolaos A., Vaxevanidis, Nikolaos M., Stergiou, Constantinos I. and Benhadj-Djilali, Redha (2016) Precision sculptured surface CNC machining using cutter location data. Key Engineering Materials, 686, pp. 224-233. ISSN (print) 1013-9826

Gillmore, Gavin K, Crockett, Robin, Denman, Tony, Flowers, Alan and Harris, Richard (2012) Radium dial watches, a potentially hazardous legacy? Environment International, 45, pp. 91-98. ISSN (print) 0160-4120

Ginzinger, L., Sahinkaya, M. N., Heckmann, B., Keogh, P. and Ulbrich, H. (2011) On the optimization problem of model-based monitoring. Science China Technological Sciences, 54(5), pp. 1095-1106. ISSN (print) 1674-7321

Godbolt, Bryan, Vitzilaios, Nikolaos I. and Lynch, Alan F. (2013) Experimental Validation of a Helicopter Autopilot Design using Model-Based PID Control. Journal of Intelligent and Robotic Systems, 70(1), pp. 385-399. ISSN (print) 0921-0296

Hadavinia, Homa and Ashcroft, Ian (2012) Forward to Special Issue on blast and impact of engineering structures. Central European Journal of Engineering, 2(4), pp. 471-472. ISSN (print) 1896-1541

Hassanin, Hany, Essa, Khamis, El-Sayed, Mahmoud Ahmed and Attallah, Moataz M. (2016) Enhancement of student learning and feedback of large group engineering lectures using audience response systems. Journal of Materials Education, 38(5-6), pp. 175-190. ISSN (print) 0738-7989

Hassanin, Hany, Modica, Francesco, El-Sayed, Mahmoud Ahmed, Liu, Jian and Essa, Khamis (2016) Manufacturing of Ti-6Al-4V Micro-Implantable Parts using hybrid selective laser melting and micro-electrical discharge machining. Advanced Engineering Materials, ISSN (print) 1438-1656 (Epub Ahead of Print)

Hassanin, Hany, Essa, Khamis, Qiu, Chunlei, Abdelhafeez, Ali M., Adkins, Nicholas J.E. and Attallah, Moataz M. (2016) Net-shape manufacturing using hybrid selective laser melting/hot isostatic pressing. Rapid Prototyping Journal, ISSN (print) 1355-2546 (In Press)

Hedayatian, M., Liaghat, G.H., Rahimi, Gh, Pol, M.H., Hadavinia, H. and Zamani, R. (2015) Investigation of the high velocity impact behavior of grid cylindrical composite structures. Polymer Composites, ISSN (print) 0272-8397 (Epub Ahead of Print)

Heidari, A. and Wen, J. (2016) Numerical simulation of detonation failure and re-initiation in bifurcated tubes. International Journal of Hydrogen Energy, ISSN (print) 0360-3199 (Epub Ahead of Print)

Heidari, Ali and Wen, Jennifer (2014) Flame acceleration and transition from deflagration to detonation in hydrogen explosions. International Journal of Hydrogen Energy, 39(11), pp. 6184-6200. ISSN (print) 0360-3199

Heidari, Ali and Wen, Jennifer X. (2014) Numerical simulation of flame acceleration and deflagration to detonation transition in hydrogen-air mixture. International Journal of Hydrogen Energy, 39(36), pp. 21317-21327. ISSN (print) 0360-3199

Horne, Jim and Rumbold, John (2015) Sleep-related road collisions. Medicine, Science and the Law, 55(3), pp. 183-185. ISSN (print) 0025-8024

Hutangkabodee, Suksun, Zweiri, Yahya, Seneviratne, Lakmal and Althoefer, Kaspar (2008) Soil parameter identification and driving force prediction for wheel-terrain interaction. International Journal of Advanced Robotic Systems, 5(4), 425 - 432. ISSN (print) 1729-8814

Hutangkabodee, Suksun, Zweiri, Yahya Hashem, Seneviratne, Lakmal Dasarath and Althoefer, Kaspar (2006) Soil parameter identification for wheel-terrain interaction dynamics and traversability prediction. International Journal of Automation and Computing, 3(3), pp. 244-251. ISSN (print) 1476-8186

Izzard, V. G., Hadavinia, H., Morris, V.J., Foot, P.J.S., Wilson, L. and Hewson, K. (2012) Compression and recovery behaviour of polyamide-6 based foams. Polymer & Polymer Composites, 20(5), p. 425. ISSN (print) 0967-3911

Keogh, P.S, Cole, M.O.T, Sahinkaya, M.N. and Burrows, C.R. (2004) On the control of synchronous vibration in rotor/magnetic bearing systems involving auxiliary bearing contact. Journal Of Engineering For Gas Turbines And Power, 126(2), pp. 366-372. ISSN (print) 0742-4795

Kock, Peter, Weller, Ralf, Ordys, Andrzej W. and Collier, Gordana (2015) Validation Methods for Digital Road Maps in Predictive Control. IEEE Transactions on Intelligent Transportation Systems, 16(1), pp. 339-351. ISSN (print) 1524-9050

Li, Sheng, Hassanin, Hany, Attallah, Moataz, Adkins, Nicholas and Essa, Khamis (2016) The development of TiNi-based negative poisson's ratio structure using selective laser melting. Acta Materialia, 105, pp. 75-83. ISSN (print) 1359-6454

Liaghat, GH., Shanazari, H., Tahmasebi, M., Aboutorabi, A. and Hadavinia, H. (2013) A Modified Analytical Model for Analysis of Perforation of Projectile into Ceramic Composite Targets. International Journal of Composite Materials, 3(6B), pp. 17-22. ISSN (print) 2166-479X

Liu, Jian, Yang, Yang, Hassanin, Hany, Jumbu, Neeraj, Deng, Sunan, Zuo, Qian and Jiang, Kyle (2016) Graphene-Alumina Nanocomposites with Improved Mechanical Properties for Biomedical Applications. ACS applied materials & interfaces, ISSN (print) 1944-8244 (Epub Ahead of Print)

Liu, Jian, Hassanin, Hany, Ni, Zhenyu, Yang, Yi, Yang, Gang and Jiang, Kyle (2016) Production of high precision micro metallic components by electroforming process. Materials and Manufacturing Processes, ISSN (print) 1042-6914 (Epub Ahead of Print)

Lusty, Chris, Sahinkaya, Necip and Keogh, Patrick (2016) A novel twin-shaft rotor layout with active magnetic couplings for vibration control. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 230(3), pp. 266-276. ISSN (print) 0959-6518

Manickam, Bhuvaneswaran, Franke, Joerg, Muppala, Sivva P. R. and Dinkelacker, Friedrich (2012) Large-eddy simulation of triangular-stabilized lean premixed turbulent flames: quality and error assessment. Flow, Turbulence and Combustion, 88(4), pp. 563-596. ISSN (print) 1386-6184

Moeinifard, Majid, Liaghat, Gholamhossein, Rahimi, Gholamhossein, Talezadehlari, Ali and Hadavinia, Homayoun (2016) Experimental investigation on the energy absorption and contact force of unstiffened and grid-stiffened composite cylindrical shells under lateral compression. Composite Structures, 152, pp. 626-636. ISSN (print) 0263-8223

Nixon, Jonathan, Kumar Dey, Prasanta and Davies, Philip (2013) An interdisciplinary approach to designing and evaluating a hybrid solar-biomass power plant. International Journal of Energy Sector Management, 7(3), pp. 321-337. ISSN (online) 1750-6220

Ozdemir, N. G., Zhang, T., Aspian, I, Scarpa, F, Hadavinia, H. and Song, Y (2016) Toughening of carbon fibre reinforced polymer composites with rubber nanoparticles for advanced industrial applications. eXPRESS Polymer Letters, 10(5), pp. 394-407. ISSN (online) 1788-618X

Ozdemir, Nazli G., Zhang, Tao, Hadavinia, Homayoun, Aspin, Ian and Wang, Jian (2015) Rheological properties, cure characteristics, and morphology of acrylonitrile-based nanorubber modified epoxy. Journal of Applied Polymer Science, 132(18), ISSN (print) 0021-8995

Petkova, Diana, Donchev, Ted and Wen, Jennifer (2014) Experimental study of the performance of CFRP strengthened small scale beams after heating to high temperatures. Construction and Building Materials, 68, pp. 55-61. ISSN (print) 0950-0618

Petkune, Natalja, Donchev, Ted, Hadavinia, Homayoun, Limbachiya, Mukesh and Wertheim, David (2016) Performance of pristine and retrofitted hybrid steel / fibre reinforced polymer composite shear walls. Construction and Building Materials, 117, pp. 198-208. ISSN (print) 0950-0618

Pol, M Hossein, Liaghat, Gholamhossein, Zamani, E and Ordys, A (2015) Investigation of the ballistic impact behavior of 2D woven glass/epoxy/nanoclay nanocomposites. Journal of Composite Materials, 49(12), pp. 1449-1460. ISSN (print) 0021-9983

Riyadi, T.W.B., Zhang, T., Marchant, D. and Zhu, X. (2014) Synthesis and fabrication of NiAl coatings with Ti underlayer using induction heating. Surface and Coatings Technology, 258, pp. 154-159. ISSN (print) 0257-8972

Rumbold, John and Seaton, Sarah (2016) Mid Staffs : disaster by numbers (or 'How to create a drama out of a Statistic')? Journal of Medical Law and Ethics, 4(1), pp. 57-70. ISSN (print) 2213-5405

Sagias, Vasileios, Stergiou, Constantinos, Evangelos, Ganiaris and Benhadj-Djilali, Redha (2014) Hybrid methodology of reverse 3D beams geometry analysis with embedded quality tools within the boundaries of a modern CAD system. World Transactions on Engineering and Technology Education, 12(3), pp. 443-448. ISSN (print) 1446-2257

Sahinkaya, M. N. and Burrows, C. R. (1985) Control of stability and the synchronous vibration of a flexible rotor supported on oil-film bvearings. Journal Of Dynamic Systems, Measurement, And Control, 107(2), pp. 139-144. ISSN (print) 0022-0434

Sahinkaya, M. N. and Plummer, A. R. (2009) Special issue on dynamics and control of parallel manipulators. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 223(1), ISSN (print) 0959-6518

Sahinkaya, M. N. (2007) Virtual non-linear disturbance observer by dual inverse dynamic modelling. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 221(6), pp. 677-688. ISSN (print) 0954-4062

Sahinkaya, M. Necip, Abulrub, Abdul-Hadi G., Keogh, Patrick S. and Burrows, Clifford R. (2011) Experiments on the transient performance of an adaptive multi-objective controller for rotating machinery. Journal Of Engineering For Gas Turbines And Power, 133(2), ISSN (print) 0742-4795

Sahinkaya, M. Necip and Hartavi, Ahu E. (2007) Variable bias current in magnetic bearings for energy optimization. IEEE Transactions on Magnetics, 43(3), pp. 1052-1060. ISSN (print) 0018-9464

Sahinkaya, M. Necip, Abulrub, Abdul-Hadi G. and Burrows, Clifford R. (2011) An adaptive multi-objective controller for flexible rotor and magnetic bearing systems. Journal Of Dynamic Systems, Measurement, And Control, 133(3), ISSN (print) 0022-0434

Sahinkaya, M. Necip, Abulrub, Abdul-Hadi G., Burrows, Clifford R. and Keogh, Patrick S. (2010) A multiobjective adaptive controller for magnetic bearing systems. Journal Of Engineering For Gas Turbines And Power, 132(12), p. 125503. ISSN (print) 0742-4795

Sahinkaya, M.N., Cole, M.O.T. and Burrows, C.R. (2001) Fault detection and tolerance in synchronous vibration control of rotor-magnetic bearing systems. Journal Of Mechanical Engineering Science - Part C, 215(12), pp. 1401-1416. ISSN (print) 0954-4062

Sahinkaya, M.N. (2001) Input shaping for vibration-free positioning of flexible systems. Proceedings of the Institution of Mechanical Engineers Part I. Journal Of Systems And Control Engineering, 215(5), pp. 467-482. ISSN (print) 0959-6518

Sahinkaya, M.N. (2004) Inverse dynamic analysis of multiphysics systems. Proceedings of the Institution of Mechanical Engineers Part I, 218(1), pp. 13-26. ISSN (print) 0959-6518

Sahinkaya, Mehmet N., Wang, Pengfei and Akehurst, Sam (2013) Causal inversion of non-minimum-phase systems for hardware-in-the-loop transmission testing. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 227(I3), pp. 298-307. ISSN (print) 0959-6518

Sarjito, and Marchant, Denis (2013) A study of a multi-stage downdraught evaporative cooling device using CFD to assess the effect of the primary inlet to mixing stack area ratio: Preliminary work to establish the baseline performance of the device. Applied Mechanics and Materials, 465-6, pp. 248-254. ISSN (print) 1660-9336

Sedyono, Joko, Hadavinia, Homayoun, Venetsanos, Demetrios and Marchant, Denis R. (2015) Enumeration search method for optimisation of stacking sequence of laminated composite plates subjected to buckling. Open Engineering, 5(1), ISSN (online) 2391-5439

Seneviratne, Lakmal, Zweiri, Yahya, Hutangkabodee, Suksun, Song, Zibin, Song, Xiaojing, Chhaniyara, Savan, Milli, Said Al and Althoefer, Kaspar (2009) The modelling and estimation of driving forces for unmanned ground vehicles in outdoor terrain. International Journal of Modelling, Identification and Control (IJMIC), 6(1), pp. 40-50. ISSN (print) 1746-6172

Shakouri, P., Ordys, A. and Askari, M.R. (2012) Adaptive cruise control with stop&go function using the state-dependent nonlinear model predictive control approach. ISA Transactions, 51(5), pp. 622-631. ISSN (print) 0019-0578

Shakouri, Payman and Ordys, Andrzej (2014) Nonlinear Model Predictive Control approach in design of Adaptive Cruise Control with automated switching to cruise control. Control Engineering Practice, 26, pp. 160-177. ISSN (print) 0967-0661

Shi, Zhenyu, Liu, Zhanqiang, Song, Hao and Zhang, Xianzhi (2016) Prediction of contact angle for hydrophobic surface fabricated with micro-machining based on minimum Gibbs free energy. Applied Surface Science, 364, pp. 597-603. ISSN (print) 0169-4332

Song, Z-B, Zweiri, Y H, Seneviratne, L D and Althoefer, K (2008) Non-linear observer for slip estimation of tracked vehicles. Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 222(4), pp. 515-533. ISSN (print) 0954-4070

Song, Z. B., Seneviratne, L. D., Althoefer, K., Song, X. J. and Zweiri, Y. H. (2009) Slip parameter estimation of a single wheel using a non-linear observer. Robotica, 27(06), pp. 801-811. ISSN (print) 0263-5747

Torabmostaedi, H. and Zhang, T. (2014) Effect of nozzle geometry and processing parameters on the formation of nanoparticles using FSP. Chemical Engineering Research and Design, 92(11), pp. 2470-2478. ISSN (print) 0263-8762

Torabmostaedi, Hosein and Zhang, Tao (2014) Computational study of the effect of processing parameters on the formation and growth of ZrO2 nanoparticles in FSP process. Chemical Engineering and Processing: Process Intensification, 78, pp. 1-10. ISSN (print) 0255-2701

Torabmostaedi, Hosein and Zhang, Tao (2014) Numerical optimization of quenching efficiency and particle size control in flame synthesis of zro2 nanoparticles. Journal of Thermal Spray Technology, 23(8), pp. 1478-1492. ISSN (print) 1059-9630

Vendra, C. Madhav Rao, Wen, J.X. and Tam, V.H.Y. (2013) Numerical simulation of turbulent flame-wall quenching using a coherent flame model. Journal of Loss Prevention in the Process Industries, 26(2), pp. 363-368. ISSN (print) 0950-4230

Vincent, I. F. V., Sahinkaya, M. N. and O'Shea, W. (2007) A woodpecker hammer. Journal Of Mechanical Engineering Science - Part C, 221(10), pp. 1141-1147. ISSN (print) 0954-4062

Vitzilaios, Nikos I. and Tourveloudis, Nikos C. (2009) An Experimental Test Bed for Small Unmanned Helicopters. Journal of Intelligent and Robotic Systems, 54(5), pp. 769-794. ISSN (print) 0921-0296

Volkov, K (2014) Formulation of wall boundary conditions in turbulent flow computations on unstructured meshes. Computational Mathematics and Mathematical Physics, 54(2), pp. 353-367. ISSN (print) 0965-5425

Volkov, K. N. and Emelyanov, V. N. (2011) Large-eddy simulation of turbulence-induced aero-optic effects in free shear flows. Journal of Physics Conference Series, 318(4), 042062. ISSN (print) 1742-6588

Wang, Kehao, Venetsanos, Demetrios, Wang, Jian and Pierscionek, Barbara (2016) Gradient moduli lens models : how material properties and application of forces can affect deformation and distributions of stress. Scientific Reports, 6, p. 31171. ISSN (online) 2045-2322

Wen, Jennifer (2012) Editorial for special issues on hydrogen safety. International Journal Of Hydrogen Energy, 37(22), p. 17350. ISSN (print) 0360-3199

Wen, Ke, Du, Fuzhou and Zhang, Xianzhi (2016) Algorithm and experiments of six-dimensional force/torque dynamic measurements based on a Stewart platform. Chinese Journal of Aeronautics, ISSN (print) 1000-9361 (Epub Ahead of Print)

Xu, B.P. and Wen, J.X. (2014) The effect of tube internal geometry on the propensity to spontaneous ignition in pressurized hydrogen release. International Journal Of Hydrogen Energy, 39(35), pp. 20503-20508. ISSN (print) 0360-3199

Xu, Hu, Bao, Yuqing, Gawne, David T. and Zhang, Tao (2016) Process control for thermal-spray deposition of thermoset coatings using computer simulation. Progress in Organic Coatings, 101, pp. 407-415. ISSN (print) 0300-9440

Zweiri, Y. H., Whidborne, J. F. and Seneviratne, L. D. (2001) Detailed analytical model of a single-cylinder diesel engine in the crank angle domain. Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 215(D11), 1197 - 1216. ISSN (print) 0954-4070

Zweiri, Y. H. and Seneviratne, L. D. (2006) Diesel engine indicated and load torque estimation using a non-linear observer. Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 220(6), pp. 775-785. ISSN (print) 0954-4070

Zweiri, Y. H., Whidborne, J. F., Seneviratne, L. D. and Althoefer, K. (2002) A comparison of dynamic models of various complexity for diesel engines. Mathematical and Computer Modelling of Dynamical Systems, 8(3), 273 - 289. ISSN (print) 1387-3954

Zweiri, Y. H., Whidborne, J. F. and Seneviratne, L. D. (2003) A three-term backpropagation algorithm. Neurocomputing, 50, 305 - 318. ISSN (print) 0925-2312

Zweiri, Yahya, Whidborne, J. F. and Seneviratne, L. D. (1999) Dynamic simulation of a single-cylinder diesel engine including dynamometer modelling and friction. Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 213(4), pp. 391-402. ISSN (print) 0954-4070

Zweiri, Yahya H. (2008) Identification schemes for unmanned excavator arm parameters. International Journal of Automation and Computing, 5(2), pp. 185-192. ISSN (print) 1476-8186

Zweiri, Yahya H., Seneviratne, Lakmal D. and Althoefer, Kaspar (2006) Modelling of closed-chain manipulators on an excavator vehicle. Mathematical and Computer Modelling of Dynamical Systems, 12(4), 329 - 345. ISSN (print) 1387-3954

Zweiri, Yahya H., Whidbourne, James F. and Seneviratne, Lakmal D. (2000) Numerical inversion of the dynamic model of a single-cylinder diesel engine. Communications in Numerical Methods in Engineering, 16(7), 505 - 517. ISSN (print) 1069-8299

Zweiri, Yahya H., Lakmal D. Seneviratne, Lakmal D. and Althoefer, Kaspar (2005) Stability analysis of a three-term backpropagation algorithm. Neural Networks, 18(10), 1341 - 1347. ISSN (print) 0893-6080

Book

Ueno, Satoshi and Sahinkaya, Mehmet (2011) Adaptive bias current control in active magnetic bearings for energy optimization. American Society of Mechanical Engineers. (2011 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC2011)-Volume 1, Parts A & B, no. 47868)

Volkov, K. N. and Emelyanov, V. N. (2013) Computational technologies in problems of gas and fluid mechanics. Moscow, Russia : BINOM Knowledge Laboratory. ISBN 9785922114387

Volkov, K. N., Emelyanov, V. N. and Zazimko, V. A. (2013) Turbulent jet: statistical models and large-eddy simulation. Moscow, Russia : Fizmatlit. 360p. ISBN 9785922115261

Volkov, Konstantin, ed. (2012) Efficiency, performance and robustness of gas turbines. Rijeka, Croatia : InTech Open. 238p. ISBN 9789535104643

Book Section

Abulrub, Abdul-Hadi G., Sahinkaya, Necip, Burrows, Clifford R. and Keogh, Patrick S. (2009) Performance assessment of a multi-frequency controller applied to a flexible rotor magnetic bearing system - contact dynamics. In: Ulbrich, Heinz and Ginzinger, Lucas, (eds.) Motion and Vibration Control: Selected Papers from MOVIC 2008. London, U.K. : Springer. pp. 11-20. ISBN 9781402094378

Alvarenga, Jessica, Vitzilaios, Nikolaos I., Rutherford, Matthew J. and Valavanis, Kimon P. (2016) Modeling and Frequency-Domain Parameter Identification of a Small-Scale Flybarless Unmanned Helicopter. In: Blockley, Richard and Shyy, Wei, (eds.) The Encyclopedia of Aerospace Engineering. Wiley. ISBN 9780470686652

Anderson, Deborah and Morgan, Michelle (2016) Summary. In: Morgan, Michelle and Anderson, Deborah, (eds.) Good practice guide : developing and acquiring employability skills, competencies and attitudes at postgraduate taught STEM level through collaboration. Kingston upon Thames, U.K. : Postgraduate Experience Project. pp. 76-77.

Bhatti, Jawaad, Plummer, Andrew R., Sahinkaya, Necip, Iravani, Pejman, Guglielmino, Emanuele and Caldwell, Darwin G. (2012) Fast and adaptive hopping height control of single-legged robot. In: UNSPECIFIED, (ed.) ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis. American Society of Mechanical Engineers. pp. 303-309. ISBN 9780791844861

Fountas, Nikolaos A., Vaxevanidis, Nikolaos M., Stergiou, Constantinos I. and Benhadj-Djilali, Redha (2015) Intelligent CNC tool path optimization for sculptured surface machining through a virus-evolutionary genetic algorithm. In: Davim, J. Paulo, (ed.) Modern manufacturing engineering. Cham, Switzerland : Springer International Publishing. pp. 143-177. (Materials forming, machining and tribology) ISSN (print) 2195-0911 ISBN 9783319201511

Hutangkalodee, S., Zweiri, Y. H., Seneviratne, L. D. and Altho, K. (2006) Multi-solution problem for track-terrain interaction dynamics and lumped soil parameter identification. In: Corke, P. and Sukkariah, S., (eds.) Field and service robotics. Berlin ; Heidelberg : Springer-Verlag. pp. 517 - 528. (Springer tracts in advanced robotics, no. 25) ISBN 9783540334521

Iravani, P. and Sahinkaya, M. N. (2010) Variable-velocity exponential input shaping for position controlled robotic systems. In: UNSPECIFIED, (ed.) ASME 2010 Dynamic Systems and Control Conference. Massachusetts, USA : American Society of Mechanical Engineers. pp. 345-351. ISBN 9780791844182

Kusztelan, A., Marchant, Denis, Yao, Yufeng and Wang, Yawei (2013) Investigating the effects on the low speed response of a pressure charged IC engine through the application of a twin-entry turbine housing. In: Yang, Gi-Chul , Ao, Sio-long and Gelman, Len, (eds.) IAENG Transactions on Engineering Technologies. Springer Netherlands. pp. 201-213. (Lecture Notes in Electrical Engineering) ISSN (print) 1876-1100 ISBN 9789400761902

Morgan, Michelle and Anderson, Deborah (2016) Introduction. In: Morgan, Michelle and Anderson, Deborah, (eds.) Good practice guide : developing and acquiring employability skills, competencies and attitudes at postgraduate taught STEM level through collaboration. Kingston upon Thames, U.K. : Postgraduate Experience Project. pp. 5-9.

Rayner, Robert, Sahinkaya, M. Necip and Hicks, Ben (2009) Combining inverse dynamics with traditional mechanism synthesis to improve the performance of high speed machinery. In: UNSPECIFIED, (ed.) Proceedings of the ASME dynamic systems and control conference.; Dynamic systems and control. Michigan, USA : American Society of Mechanical Engineers. pp. 393-400. ISBN 9780791843352

Rayner, Robert A. C. and Sahinkaya, M. Necip (2008) Synthesis of velocity reference cam functions for smooth operation of high speed mechanisms. In: Felipe, J. , Cetto, J.A. and Ferrier, J.L., (eds.) ICINCO 2008: Proceedings of the fifth international conference on informatics in control, automation and robotics, vol SPSMC: signal processing, systems modeling and control. Institute for Systems and Technologies of Information, Control and Communication. pp. 183-187. ISBN 9789898111326

Sahinkaya, M. Necip and Li, Yanzhi (2005) Inverse dynamic analysis and linearisation of a high speed parallel mechanism. In: UNSPECIFIED, (ed.) 29th Mechanisms and Robotics Conference, Parts A and B. American Society of Mechanical Engineers. pp. 175-181. ISBN 0791847446

Sahinkaya, M. Necip, Rayner, Robert M. C., Vernon, Geoff, Shirley, Graham and Aggarwal, Raj K. (2007) Synthesis of demand signals for high speed operation of a packaging mechanism. In: UNSPECIFIED, (ed.) Proceedings of the ASME Design Engineering Technical Conferences ; Biennial conference on mechanical vibration and noise. Nevada, USA : American Soceity of Mechanical Engineers. pp. 2267-2273. ISBN 9780791848029

Shakouri, P., Ordys, A. and Collier, G. (2014) Robotic Implementation of the Adaptive Cruise Control-Comparison of Three Control Methods. In: Březina, Tomáš and Jabloński, Ryszard, (eds.) Mechatronics 2013. Switzerland : Springer. pp. 633-640. ISBN 9783319022932

Volkov, K. (2013) Large-eddy simulation of turbulence-induced aero-optical effects in free shear and wall bounded flows. In: Driss, Zied, (ed.) Turbulent flows: prediction, modeling and analysis. Hauppauge, U.S. : Nova Science. pp. 27-69. (Physics research and technology) ISBN 9781624177422

Volkov, Konstantin (2012) Introductory chapter: overview. In: Volkov, Konstantin, (ed.) Efficiency, performance and robustness of gas turbines. Rijeka, Croatia : InTech Open. pp. 1-4. ISBN 9789535104643

Wang, Pengfei, Sahinkaya, M. Necip and Akehurst, Sam (2009) Pseudo-causal tracking control of a nonminimum phase system. In: UNSPECIFIED, (ed.) ASME 2009 Dynamic Systems and Control Conference. American Society of Mechanical Engineers. pp. 289-296. ISBN 9780791848937

Conference or Workshop Item

Aghajani, Hamed, Dembele, Siaka and Wen, Jennifer (2013) Modelling of Sprinkler Sprays using Deterministic and Stochastic Approaches. In: 7th International Seminar on Fire and Explosion Hazards (ISFEH); 5 – 10 May 2013, Providence, USA. ISBN 9789810759407

Alam, Maqsood, Dembele, Siaka, Madhav Rao, Vendra C. and Wen, Jennifer (2016) Numerical prediction of liquid pool fires burning rate with a CFD approach. In: Interflam 2016 : 14th International International Conference and Exhibition on Fire Science and Engineering; 04 - 06 Jul 2016, Windsor, U.K..

Aljaafreh, Talal, Zweiri, Yahya, Seneviratne, Lakmal and Althoefer, Kaspar (2006) Force displacement modelling of soft tissue-tool interactions using circular indentors during indentation test. In: International Conference on Autonomous Robots and Agents (ICARA); 12-14 Dec 2006, Palmerston North, New Zealand. (Proceedings of the 3rd International Conference on Autonomous Robots and Agents)

Alvarenga, Jessica, Vitzilaios, Nikolaos I., Rutherford, Matthew J. and Valavanis, Kimon P. (2015) Scaled control performance benchmarks and maneuvers for Small-Scale Unmanned Helicopters. In: 54th IEEE Conference on Decision and Control; 15–18 Dec, 2015, Osaka, Japan. ISBN 9781479978847

Bittar, Adriano, Vitzilaios, Nikolaos I., Rutherford, Matthew J. and Valavanis, Kimon P. (2015) An integrated framework for Cooperative Ground and Aerial Vehicles Missions utilizing Matlab and X-Plane. In: 9th Annual IEEE International Systems Conference (SysCon); 13-16 April 2015, Vancouver, BC, Canada.

Chan, Kinyip, Ordys, Andrzej, Duran, Olga, Volkov, Konstantin and Deng, Jiamei (2014) Adaptive neuro-fuzzy method to estimate virtual SI engine fuel composition using residual gas parameters. In: 10th International Conference on Control (Control 2014); 9 - 11 Jul 2014, Loughborough.

Chhaniyara, Savan, Althoefer, Kaspar, Zweiri, Yahya H. and Seneviratne, Lakmal D. (2007) A novel approach for self-localization based on computer vision and artificial marker deposition. In: International Conference on Networking, Sensing and Control; 15 - 17 Apr 2007, London, U. K.. (International Conference on Networking, Sensing and Control, no. 2007) ISBN 1424410762

ChooPar, Tan, Zweiri, Yahya H., Althoefer, Kaspar and Seneviratne, Lakmal D. (2005) Online soil-bucket interaction identification for autonomous excavation. In: International Conference on Robotics and Automation (ICRA); 18 - 22 Apr 2005, Barcelona, Spain. (Proceedings of the International Conference on Robotics and Automation, no. 2005) ISBN 078038914X

Choopar, Tan, Zweiri, Yahya H., Althoefer, Kaspar and Seneviratne, Lakmal D. (2004) Hybrid model in a real-time soil parameter identification scheme for autonomous excavation. In: International Conference on Robotics and Automation (ICRA); 26 Apr - 1 May 2004, New Orleans, USA. (Proceedings of the International Conference on Robotics and Automation, no. 2004) ISBN 0780382323

Conyers, Stephen A., Vitzilaios, Nikolaos I., Rutherford, Matthew J. and Valavanis, Kimon P. (2015) A mobile self-leveling landing platform for VTOL UAVs. In: 2015 IEEE International Conference on Robotics and Automation (ICRA); 26-30 May 2015, Seattle, WA, U.S.A.. ISSN (print) 1050-4729

Dombrovskiy, Leonid A., Dembele, Siaka and Wen, Jennifer X. (2016) Shielding of fire radiation with the use of multi-layered water mist curtains : preliminary estimates. In: 8th International Symposium on Radiative Transfer RAD-16; 06 - 10 Jun 2016, Cappadocia, Turkey. (Unpublished)

Duran, O, Althoefer, K and Seneviratne, L (2002) Automated sewer inspection using image processing and a neural classifier. In: International Joint Conference in Neural Networks (IJCNN02); 12-17 May 2002, Honolulu, Hawaii, USA. (Proceedings of the 2002 International Joint Conference on Neural Networks, no. 2)

Duran, O (2014) Subpixel tracking using spectral data and Kalman filter. In: 6th Workshop on Hyperspectral Image and Signal Processing: Evolution in Remote Sensing (WHISPERS); 24-27 June 2014, Lausanne, Switzerland.

Fountas, Nikolaos A., Kechagias, John, Benhadj-Djilali, Redha, Stergiou, Constantinos I. and Vaxevanidis, Nikolaos M. (2014) Optimizing 5-axis sculptured surface finish machining through design of experiments and neural networks. In: 12th Biennial Conference on Engineering Systems Design and Analysis; 5-27 Jun 2014, Copenhagen, Denmark. (ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1) ISBN 9780791845837

Fountas, Nikolaos A., Vaxevanidis, Nikolaos M., Stergiou, Constantinos I. and Benhadj-Djilali, Redha (2015) Quality research on the performance of a virus-evolutionary genetic algorithm for optimized sculptured surface CNC machining, through standard benchmarks. In: 9th International Quality Conference May 2015 Center for Quality, Faculty of Engineering, University of Kragujevac; 04 - 05 Jun 2015, Kragujevac, Serbia. ISBN 9788663350151

Godbolt, Bryan, Vitzilaios, Nikolaos, Bergen, Chris and Lynch, Alan F. (2013) Experimental Validation of a Helicopter Autopilot: Time-Varying Trajectory tracking. In: International Conference on Unmanned Aircraft Systems (ICUAS); 28-31 May, 2013, Atlanta, GA, U.S.A.. ISBN 9781479908158

Hartavi, A. E., Tuncay, R. N. and Sahinkaya, M. N. (2006) The effect of current control strategies on power consumption of a magnetically levitated turbomolecular pump. In: IPEMC 2006: CES/IEEE 5TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE; Aug 14-16 2006, Shanghai, China. (IEEE International Power Electronics and Motion Control Conference IPEMC) ISBN 9781424404483

Heidari, A. and Wen, J.X. (2011) Flame acceleration and transition from deflagration to detonation in hydrogen explosions. In: 4th International Conference on Hydrogen Safety, ICHS; 12 - 14 Sept 2011, San Francisco, U.S.A..

Heidari, Ali, Xu, Baopeng, Jie, Hongen and Wen, Jennifer (2012) Numerical simulation of carbon dioxide dispersion from vertical vent release. In: Third International Forum on Transportation of CO2 by Pipeline; 20-21 June 2012, Newcastle, U.K..

Heidari, Ali and Wen, Jennifer (2015) Numerical simulation of detonation failure and re-initiation in bifurcated tubes. In: The 6th International Conference on Hydrogen Safety (ICHS 2015); 19-21 Oct, 2015, Yokohama, Japan.

Heidari, Ali and Wen, Jennifer (2015) Numerical simulation of diverging detonation in hydrogen air mixtures. In: The 6th International Conference on Hydrogen Safety (ICHS 2015); 19-21 Oct 2015, Yokohama, Japan.

Hutangkabodee, Suksun, Zweiri, Yahya H., Seneviratne, Lakmal D. and Althoefer, Kaspar (2006) Performance prediction of a wheeled vehicle on unknown terrain using identified soil parameters. In: International Conference on Robotics and Automation (ICRA); 15 - 19 May 2006, Orlando, USA. (Proceedings of the International Conference on Robotics and Automation) ISSN (print) 1050-4729 ISBN 0780395050

Kanistras, Konstantinos, Chander Saka, Pranith, Valavanis, Kimon P., Vitzilaios, Nikolaos and Rutherford, Matthew J. (2015) Design and Development of an Air Supply Unit for Circulation Control Wing-Based UAVs. In: 2015 IEEE Aerospace Conference; 7-14 March 2015, Big Sky, MT, U.S.A.. ISSN (print) 1095-323X ISBN 9781479953790

Kanistras, Konstantinos, Rutherford, Matthew J., Vitzilaios, Nikolaos and Valavanis, Kimon P. (2014) Experimental Study of Circulation Control Wings at Low Reynolds Numbers. In: 32nd AIAA Applied Aerodynamics Conference; 16–20 June, 2014, Atlanta, GA, U.S.A..

Kanistras, Konstantinos, Chander Saka, Pranith, Valavanis, Kimon P., Vitzilaios, Nikolaos I. and Rutherford, Matthew J. (2015) Low Speed Wind Tunnel Investigation of a Circulation Control Wing for Enhanced Lift. In: 33rd AIAA Applied Aerodynamics Conference; 22–26 June, 2015, Dallas, TX, U.S.A..

Katzourakis, Diomidis, Vitzilaios, Nikolaos I. and Tsourveloudis, Nikos C. (2009) Vision Aided Navigation for Unmanned Helicopters. In: 17th IEEE Mediterranean Conference on Control and Automation (MED 2009); 24–26 June, 2009, Thessaloniki, Greece. ISBN 9781424446858

KhodadadiAzadboni, R, Wen, J, Heidari, A, Muppala, S and Wang, C (2016) Numerical simulation of flame acceleration and transition from deflagration to detonation using OpenFOAM. In: The 11th OpenFOAM Workshop; 26 - 30 Jun 2016, Guimaraes, Portugal.

Kusztelan, A, Marchant, D.R., Yao, Y., Wang, Y., Selcuk, S and Gaikwad, A (2012) Increases in Low Speed Response of an IC Engine using a Twin-entry Turbocharger. In: World Congress of Engineering; 4-6 July 2012, London, U.K.. ISBN 9789881925220

Macchi, M., Wen, J., Volkov, K., Heidari, A. and Chung, Y. (2015) Modelling liquid fuel cascades with OpenFOAM. In: 11th Global Congress on Process Safety; 27-29 Apr 2015, Texas, USA.

Maleki, Ahmad, Donchev, Ted, Hadavinia, Homayoun and Limbachiya, Mukesh (2011) Numerical modelling and experimental investigation of GFRP-steel sandwich shear walls. In: ICTWS 2011 The 6th International Conference on Thin Walled Structures ICTWS 2011; 05 - 07 Sep 2011, Timisoara, Romania. (Unpublished)

Martin, F., Duran, O. and Aguado, Jose A. (2012) Assessment of emerging faults in wind turbine power transformers using the S transform. In: European Workshop on Renewable Energy Systems,; 17-28 Sep 2012, Antalya, Turkey.

Morgan, Michelle and Ordys, Andrew (2014) Engineering postgraduate courses: Exploring expectations and attitudes towards postgraduate study. In: Engineering Professors’ Council Congress 2014; 08 Apr 2014, Glasgow, U.K.. (Unpublished)

Nanayakkara, Visakha, Ataka, Ahmad, Venetsanos, Demetrios, Duran, Olga, Vitzilaios, Nikolaos, Nanayakkara, Thrishantha and Sahinkaya, Necip (2016) Kinematic Analysis of the Human Thumb with Foldable Palm. In: 17th Towards Autonomous Robotic Systems (TAROS-16); 28–30 June 2016, Sheffield, UK. (Lecture Notes in Computer Science, no. 9716) ISSN (print) 0302-9743 ISBN 9783319403786

Noonan, David P., Liu, Hongbin, Zweiri, Yahya H., Althoefer, Kaspar A. and Seneviratne, Lakmal D. (2007) A dual-function wheeled probe for tissue viscoelastic property identification during minimally invasive surgery. In: IEEE International Conference on Robotics and Automation; 10 - 14 Apr 2007, Rome, Italy. (Proceedings of the International Conference on Advanced Robotics) ISSN (print) 1050-4729

Raju, V, Balu, K, Collier, G and Duran, O (2011) Automated testing of satellite data configuration modules using Labview. In: 2nd International Conference on Space Technology; 15 - 17 Sept 2011, Athens, Greece.

Song, Xiaojing, Seneviratne, L. D, Althoefer, K., Song, Zibin and Zweiri, Y. H. (2007) Visual odometry for velocity estimation of UGVs. In: International Conference on Mechatronics and Automation (ICMA); 5 - 8 Aug 2007, Harbin, Heilongjiang, China. (International Conference on Mechatronics and Automation, no. 2007) ISBN 9781424408283

Song, Z.B., Zweiri, Yahya H., Seneviratne, Lakmal D. and Althoefer, Kaspar (2005) Driver support system based on a non-linear slip observer for off road vehicles. In: 16th IFAC World Congress; 4-8 July 2005, Prague, Czech Republic. (Proceedings of the 16th IFAC World Congress, no. 16, 1) ISBN 9783902661753

Song, Zibin, Zweiri, Yahya H. and Seneviratne, Lakmal D. (2006) Non-linear observer for slip estimation of skid-steering vehicles. In: International Conference on Robotics and Automation (ICRA); 15 - 19 May 2006, Orlando, USA. (Proceedings of the International Conference on Robotics and Automation, no. 2006) ISBN 0780395050

Song, Zibin, Song, Xiaojing, Altheoer, K., Zweiri, Yahya and Seneviratne, L. (2007) Non-linear observer for slip parameter estimation of unmanned wheeled vehicles. In: International Conference on Mechatronics and Automation (ICMA); 5 - 7 Aug 2007, Harbin, Heilongjiang, China. ISBN 9781424408283

Tsourveloudis, Nikos C and Vitzilaios, Nikos I. (2009) UAS for Fire Management: State-of-the-art, Early Warning and Trends. In: 17th IEEE Mediterranean Conference on Control and Automation; 24-26 June 2009, Thessaloniki, Greece. ISBN 9781424446841

Turner, D, Yao, Y. and Marchant, D. (2012) Motorcycle Aerodynamic Performance Improvement through Belly Pan Design Evaluation and Testing. In: SAE 2012 World Congress; 24-26 Apr 2012, Detroit, Michigan, U.S.A..

Udechukwu, Izunna, Dembele, Siaka, Heidari, Ali, Volkov, Konstantin and Wen, Jennifer (2014) Investigation of liquefied natural gas (LNG) dispersion using computational fluid dynamics. In: 6th. European Conference on Computational Fluid Dynamics (ECFD VI); 20-25 Jul 2014, Barcelona, Spain.

Udechukwu, Izunna D, Dembele, Siaka, Heidari, Ali, Volkov, Konstantin N and Wen, Jennifer X (2014) Computational fluid dynamics simulation of LNG dispersion using openFOAM. In: 22nd Annual Conference of the CFD Society of Canada; 1-4 Jun 2014, Toronto, Canada.

Vitzilaios, Nikos and Tsourveloudis, Nikos (2009) Safe Test Flights for Small Rotorcrafts. In: 5th International Conference on Informatics in Control, Automation and Robotics; 11–15 May, 2008, Madeira, Portugal. (Lecture Notes in Electrical Engineering, no. 37) ISSN (online) 1876-1100 ISBN 9783642002700

Vitzilaios, Nikos I. and Tsourveloudis, Nikos C (2008) Altitude Control of Small Helicopters Using a Prototype Test Bed. In: 5th International Conference on Informatics in Control, Automation and Robotics; 11–15 May, 2008, Madeira, Portugal. ISBN 9789898111319

Zia, M.T, Curley, A., Duran, O. and Razmkhah, O. (2011) Application of LabView and cRIO for high precision positioning of Mars Rover using DC motors. In: 2nd International Conference on Space Technology (ICST 2011); 15-17 Sep 2011, Athens, Greece. (Unpublished)

Zweiri, Yahya H. and Seneviratne, Lakmal D. (2007) Diesel engine indicated torque estimation based on artificial neural networks. In: IEEE/ACS International Conference on Computer Systems and Applications (AICCSA); 13 - 16 May 2007, Amman, Jordan. (IEEE/ACS International Conference on Computer Systems and Applications, no. 2007) ISBN 1424410304

Monograph

Morgan, Michelle [Editor] and Anderson, Deborah [Editor] (2016) Good practice guide : developing and acquiring employability skills, competencies and attitudes at postgraduate taught STEM level through collaboration. (Discussion Paper) Kingston upon Thames, U.K. : Postgraduate Experience Project. 79 p.

Patent

Abde Qader Alzu'bi, Hamzeh Mahmoud, Abd Allateef, Imad Abd, Zweiri, Yahya, Alkhateeb, Basim and Al-Majali, Yahya Taha Ayed (2015) Abde Qader Alzu'bi; Hamzeh Mahmoud, Allateef; Imad Abd, Zweiri; Yahya, Alkhateeb; Basim, Ayed Al-Majali; Yahya Taha Sided performance coaxial vertical take-off and landing UAV and pitch stability technique using oblique active tilting. US 8,931,729 B2.

Alzu'bi, Hamzeh Mahmoud Abde Quader [Inventor], Allateef, Imad Abd [Inventor], Zweiri, Yahya [Inventor], Alkhateeb, Basim [Inventor] and Al-Masarwah, Ibrahem Mubarak Saleem [Inventor] (2013) King Abdullah II Design and Development Bureau Quad tilt rotor vertical take off and landing (vtol) unmanned aerial vehicle (uav) with 45 degree rotors. US20130105635.