Article

Abdellatif, A., Alfayad, S., Hildebrandt, Arne-Christoph, Ouezdou, F.B., Mechbal, N. and Zweiri, Yahya (2018) Development of a new hydraulic ankle for HYDROID humanoid robot. Journal of Intelligent & Robotic Systems, 92(2), pp. 293-308. ISSN (print) 0921-0296

Abdullahi, Bala, Elsayed, Ahmed, Al-Dadah, Raya, Mahmoud, Sa'ad, Mahrous, Abdel Fateh, Muhammad, Nura Mu'az and Abbakar, Saidu Bello (2018) Experimental and numerical investigation of thermosyphon heat pipe performance at various inclination angles. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 44(1), pp. 85-98. ISSN (online) 2289-7879

Al-Hashimi, Nihad, Begg, Nazish, Alany, Raid G., Hassanin, Hany and Elshaer, Amr (2018) Oral modified release multiple-unit particulate systems : compressed pellets, microparticles and nanoparticles. Pharmaceutics, 10(4), p. 176. ISSN (print) 1999-4923

Atherton, Mark, Jiang, Pingfei, Harrison, David and Malizia, Alessio (2018) Design for invention : annotation of functional geometry interaction for representing novel working principles. Research in Engineering Design, 29(2), pp. 245-262. ISSN (print) 0934-9839

Augousti, A T., Baker, A and Marlow, J-J (2018) Design and test firing of a dual bidirectional double vortex bipropellant rocket engine. Journal of Physics: Conference Series, 1065, p. 262002. ISSN (print) 1742-6588

Augousti, A T., Baker, A, Claus, M and Karaveckas, L (2018) Development of a high flow rate piston pump for rocket engines. Journal of Physics: Conference Series, 1065, p. 262003. ISSN (print) 1742-6588

Augousti, A T. and Trunins, J (2018) Experimental design of a system to investigate chaotic dripping. Journal of Physics: Conference Series, 1065, p. 262001. ISSN (print) 1742-6588

Augousti, Andy T., Gusin, Pawel, Kusmierz, Bartosz, Masajada, Jan and Radosz, Andrzej (2018) On the speed of a test particle inside the Schwarzschild event horizon and other kinds of black holes. General Relativity and Gravitation, 50, p. 131. ISSN (print) 0001-7701

Awad, Mohammad I., Gan, Dongming, Hussain, Irfan, Az-Zu'bi, Ali, Stefanini, Cesare, Khalaf, Kinda, Zweiri, Yahya, Dias, Jorge and Seneviratne, Lakmal D. (2018) Design of a novel passive Binary-Controlled Variable Stiffness Joint (BpVSJ) towards passive haptic interface application. IEEE Access, 6, pp. 63045-63057. ISSN (online) 2169-3536

Awad, Mohammad I., Hussain, Irfan, Gan, Dongming, Az-zu'bi, Ali, Stefanini, Cesare, Khalaf, Kinda, Zweiri, Yahya, Taha, Tarek, Dias, Jorge and Seneviratne, Lakmal (2018) Passive Discrete Variable Stiffness Joint (pDVSJ-II) : modeling, design, characterization, and testing toward passive haptic interface. Journal of Mechanisms and Robotics, 11(1), 011005. ISSN (print) 1942-4302

Bulat, Pavel V., Mitchell, Samuel and Volkov, Konstantin N. (2018) Aerodynamic characteristics of an aerofoil in wide range of angles of attack. Journal of Engineering and Applied Sciences, 13(8 SI), pp. 6451-6461. ISSN (print) 1816-949X

Bulat, Pavel V. and Volkov, Konstantin N. (2018) Fluid/solid coupled heat transfer analysis of a free rotating disc. Archives of Thermodynamics, 39(3), pp. 169-192. ISSN (online) 2083-6023

Chang, Chun, Sciacovelli, Adriano, Wu, Zhiyong, Li, Xin, Li, Yongliang, Zhao, Mingzhi, Deng, Jie, Wang, Zhifeng and Ding, Yulong (2018) Enhanced heat transfer in a parabolic trough solar receiver by inserting rods and using molten salt as heat transfer fluid. Applied Energy, 220, pp. 337-350. ISSN (print) 0306-2619

Dababneh, Odeh, Kipouros, Timoleon and Whidborne, James F. (2018) Application of an efficient gradient-based optimization strategy for aircraft wing structures. Aerospace, 5(1), p. 3. ISSN (online) 2226-4310

Dababneh, Odeh and Kipouros, Timoleon (2018) Influence of high fidelity structural models on the predicted mass of aircraft wing using design optimization. Aerospace Science and Technology, 79, pp. 164-173. ISSN (print) 1270-9638

De Iorio, Antonio, Grasso, Marzio, Penta, Francesco, Pucillo, Giovanni Pio, Rossi, Stefano and Testa, Mario (2018) On the ballast–sleeper interaction in the longitudinal and lateral directions. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 232(2), pp. 620-631. ISSN (print) 0954-4097

Deng, Jie, Furbo, Simon, Kong, Weiqiang and Fan, Jianhua (2018) Thermal performance assessment and improvement of a solar domestic hot water tank with PCM in the mantle. Energy and Buildings, 172, pp. 10-21. ISSN (print) 0378-7788

Dombrovsky, Leonid A., Dembele, Siaka, Wen, Jennifer X. and Sikic, Ivan (2018) Two-step method for radiative transfer calculations in a developing pool fire at the initial stage of its suppression by a water spray. International Journal of Heat and Mass Transfer, 127(B), pp. 717-726. ISSN (print) 0017-9310

ElShaer, Amr, Al-khattawi, Ali, Mohammed, Afzal R., Warzecha, Monika, Lamprou, Dimitrios A. and Hassanin, Hany (2018) Understanding the compaction behaviour of low-substituted HPC : macro, micro, and nano-metric evaluations. Pharmaceutical Development and Technology, 23(5), pp. 442-453. ISSN (print) 1083-7450

Essa, Khamis, Jamshidi, Parastoo, Zou, Ji, Attallah, Moataz M. and Hassanin, Hany (2018) Porosity control in 316L stainless steel using cold and hot isostatic pressing. Materials & Design, 138, pp. 21-29. ISSN (print) 0264-1275

Galatas, Athanasios, Hassanin, Hany, Zweiri, Yahya and Seneviratne, Lakmal (2018) Additive manufactured sandwich composite/ABS parts for unmanned aerial vehicle applications. Polymers, 10(11), p. 1262. ISSN (online) 2073-4360

Gaz, Claudio, Magrini, Emanuele and De Luca, Alessandro (2018) A model-based residual approach for human-robot collaboration during manual polishing operations. Mechatronics, 55(2018), pp. 234-247. ISSN (print) 0957-4158

Grasso, Marzio, Azzouz, Lyes, Ruiz-Hincapie, Paula, Zarrelli, Mauro and Ren, Guogang (2018) Effect of temperature on the mechanical properties of 3D-printed PLA tensile specimens. Rapid Prototyping Journal, 24(8), pp. 1337-1346. ISSN (print) 1355-2546

Grasso, Marzio, Xu, Yigeng, Russo, Roberto and Rosiello, Vincenzo (2018) Mixed mode fatigue crack propagation behaviour of aluminium F357 alloy. Engineering Failure Analysis, 90, pp. 463-475. ISSN (print) 1350-6307

Gusin, Pawel, Augousti, Andy, Formalik, Filip and Radosz, Andrzej (2018) The (a)symmetry between the exterior and interior of a Schwarzschild black hole. Symmetry, 10(9), p. 366. ISSN (online) 2073-8994

Hassanin, Hany, Ahmed El-Sayed, Mahmoud, Elshaer, Amr, Essa, Khamis and Jiang, Kyle (2018) Microfabrication of net shape zirconia/alumina nanocomposite micro parts. Nanomaterials, 8(8), p. 593. ISSN (online) 2079-4991

Ilankoon, I.M.S.K., Tang, Yuan, Ghorbani, Yousef, Northey, Stephen, Yellishetty, Mohan, Deng, Xiangyi and McBride, Diane (2018) The current state and future directions of percolation leaching in the Chinese mining industry : challenges and opportunities. Minerals Engineering, 125, pp. 206-222. ISSN (print) 0892-6875

Imanian Ghazanlou, Siavash, Farhood, Amir Hassan Shafie, Hosouli, Sahand, Ahmadiyeh, Somayeh and Rasooli, Ali (2018) Pulse and direct electrodeposition of Ni–Co/micro and nanosized SiO2 particles. Materials and Manufacturing Processes, 33(10), pp. 1067-1079. ISSN (print) 1042-6914

Ismail, Mohd Azmi and Wang, Jian (2018) Effect of nozzle rotation angles and sizes on thermal characteristic of swirl anti-icing. Journal of Mechanical Science and Technology, 32(9), pp. 4485-4493. ISSN (print) 1738-494X

Javadinejad, Mahdi, Mashayekhi, Mohammad, Karevan, Mehdi and Hadavinia, Homayoun (2018) Using the equivalent fiber approach in two-scale modeling of the elastic behavior of carbon nanotube/epoxy nanocomposite. Nanomaterials, 8(9), p. 696. ISSN (online) 2079-4991

Jiang, Pingfei, Atherton, Mark, Sorce, Salvatore, Harrison, David and Malizia, Alessio (2018) Design for invention : a framework for identifying emerging design–prior art conflict. Journal of Engineering Design, 29(10), pp. 596-615. ISSN (print) 0954-4828

Junaid, Ali, Sanchez, Alejandro, Bosch, Javier, Vitzilaios, Nikolaos and Zweiri, Yahya (2018) Design and implementation of a dual-axis tilting quadcopter. Robotics, 7(4), p. 65. ISSN (online) 2218-6581

Kamliya Jawahar, Hasan, Lin, Yujing and Savill, Mark (2018) Large eddy simulation of airfoil self-noise using OpenFOAM. Aircraft Engineering and Aerospace Technology, 90(1), pp. 126-133. ISSN (print) 1748-8842

Khodadadi, A, Liaghat, GH, Sabet, AR, Hadavinia, H, Aboutorabi, A, Razmkhah, O, Akbari, M and Tahmasebi, M (2018) Experimental and numerical analysis of penetration into Kevlar fabric impregnated with shear thickening fluid. Journal of Thermoplastic Composite Materials, 31(3), pp. 392-407. ISSN (print) 0892-7057

Khodadadi Azadboni, Reza, Heidari, Ali and Wen, Jennifer X. (2018) A computational fluid dynamic investigation of inhomogeneous hydrogen flame acceleration and transition to detonation. Flow, Turbulence and Combustion, 101(4), pp. 1009-1021. ISSN (print) 1386-6184

Kleinschmidt, Ross, Watson, Drew, Janik, Miroslaw and Gillmore, Gavin (2018) The presence and dosimetry of radon and thoron in a historical, underground metalliferous mine. Journal of Sustainable Mining, 17(3), pp. 120-130. ISSN (print) 2300-3960

Klippstein, Helge, Hassanin, Hany, Sanchez, Alejandro Diaz de Cerio, Zweiri, Yahya and Senevirante, Lakmal (2018) Additive manufacturing of porous structures for unmanned aerial vehicles applications. Advanced Engineering Materials, 20(9), p. 1800290. ISSN (print) 1438-1656

Klippstein, Helge, Sanchez, Alejandro Diaz De Cerio, Hassanin, Hany, Zweiri, Yahya and Seneviratne, Lakmal (2018) Fused deposition modelling for unmanned aerial vehicles : a review. Advanced Engineering Materials, 20(2), p. 1700552. ISSN (print) 1438-1656

Matsika, Emmanuel, O'Neill, Conor, Grasso, Marzio and De Iorio, Antonio (2018) Selection and ranking of the main beam geometry of a freight wagon for lightweighting. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 232(2), pp. 495-513. ISSN (print) 0954-4097

Middlehurst, Gary, Yao, Runming, Jiang, Lai, Deng, Jie, Clements-Croome, Derek and Adams, George (2018) A preliminary study on post-occupancy evaluation of four office buildings in the UK based on the Analytic Hierarchy Process. Intelligent Buildings International, 10(4), pp. 234-246. ISSN (print) 1750-8975

Omer, JR and Eghan, Ben A (2018) Numerical analysis of road pavement response. Advancements in Civil Engineering & Technology, 2(2), ISSN (online) 2639-0574

Percival, L.M.E., Jenkyns, H.C., Mather, T.A., Dickson, A.J., Batenburg, S.J., Ruhl, M., Hesselbo, S.P., Barclay, R., Jarvis, Ian, Robinson, S.A. and Woelders, L. (2018) Does large igneous province volcanism always perturb the mercury cycle? Comparing the records of Oceanic Anoxic Event 2 and the end-Cretaceous to other Mesozoic events. American Journal of Science, 318(8), pp. 799-860. ISSN (print) 0002-9599

Pierucci, Giacomo, Hosouli, Sahand, Salvestroni, Michele, Messeri, Matteo, Fagioli, Federico, Taddei, Francesco and De Lucia, Maurizio (2018) Experimental methodology and thermal loss tests on small size absorber tubes for solar applications. Energies, 11(10), p. 2552. ISSN (online) 1996-1073

Prieto-Campos, Antonio, Diaz-Cuevas, Pilar, Fernandez-Nunez, Miriam and Ojeda-Zujar, Jose (2018) Methodology for improving the analysis, interpretation, and geo-visualisation of erosion rates in coastal beaches - Andalusia, Southern Spain. Geosciences, 8(9), p. 335. ISSN (online) 2076-3263

Samad, Shahab, Attaullah, Shah and Limbachiya, Mukesh C. (2018) Assessment of Punching Shear of Flat Slabs Using Ground Slag. ACI Materials Journal, 115(3), pp. 459-469. ISSN (print) 0889-325X

Smith, Matthew, Walford, Nigel Stephen and Jimenez-Bescos, Carlos (2018) Assessing the user response to differences in functionality when visualising 3D models of cultural heritage sites using the Technology Readiness Index. Digital Applications in Archaeology and Cultural Heritage, 10, e00076. ISSN (print) 2212-0548

Sorce, Salvatore, Malizia, Alessio, Jiang, Pingfei, Atherton, Mark and Harrison, David (2018) A novel visual interface to foster innovation in mechanical engineering and protect from patent infringement. Journal of Physics : Conference Series, 1004, 012024. ISSN (print) 1742-6588

Tavri, Purva (2018) Define & conquer. CIWM Journal, pp. 24-26.

Tavri, Purva (2018) It's in the bag... CIWM Journal, pp. 34-35.

Tian, Zhiyong, Perers, Bengt, Furbo, Simon, Fan, Jianhua, Deng, Jie and Dragsted, Janne (2018) A comprehensive approach for modelling horizontal diffuse radiation, direct normal irradiance and total tilted solar radiation based on global radiation under Danish climate conditions. Energies, 11(5), p. 1315. ISSN (online) 1996-1073

Umeokafor, Nnedinma and Windapo, Abimbola (2018) Challenges to and opportunities for establishing a qualitative approach to built environment research in higher education institutions. Journal of Engineering, Design and Technology, 16(4), pp. 557-580. ISSN (online) 1726-0531

Umeokafor, Nnedinma (2018) Community interventions in construction health and safety and the implications. Journal of Financial Management of Property and Construction, 23(3), pp. 312-329. ISSN (online) 1366-4387

Umeokafor, Nnedinma and Windapo, Abimbola Olukemi (2018) Understanding the underrepresentation of qualitative research approaches to built environment research in Nigeria. International Journal of Construction Education and Research, 14(3), pp. 198-217. ISSN (print) 1557-8771

Umeokafor, Nnedinma (2018) An investigation into public and private clients' attitudes, commitment and impact on construction health and safety in Nigeria. Engineering, Construction and Architectural Management, 25(6), pp. 798-815. ISSN (print) 0969-9988

Wang, Kehao, Venetsanos, Demetrios, Wang, Jian and Pierscionek, Barbara K. (2018) Combined use of parallel-plate compression and finite element modeling to analyze the mechanical properties of intact porcine lens. Journal of Mechanics in Medicine and Biology, 18(7), p. 1840013. ISSN (print) 0219-5194

Wei, Hong-Qiu, Chen, Ye, Zhang, Tao, Liu, Liwu, Qiao, Jinliang, Liu, Yanju and Leng, Jinsong (2018) Thermal, mechanical, and shape-memory properties of nanorubber-toughened, epoxy-based shape-memory nanocomposites. Journal of Applied Polymer Science, 135(6), p. 45780. ISSN (print) 0021-8995

Wyllie, Jamalia O.Y., Essah, Emmanuel A. and Ofetotse, Eng L. (2018) Barriers of solar energy uptake and the potential for mitigation solutions in Barbados. Renewable and Sustainable Energy Reviews, 91, pp. 935-949. ISSN (print) 1364-0321

Yogeshwaran, Gayathri, Perera, B.A.K.S. and Ariyachandra, M.R. Mahendrini Fernando (2018) Competencies expected of graduate quantity surveyors working in developing countries. Journal of Financial Management of Property and Construction, 23(2), pp. 202-220. ISSN (print) 1366-4387

Zotti, Aldobenedetto, Zuppolini, Simona, Tabi, Tamas, Grasso, Marzio, Ren, Gougang, Borriello, Anna and Zarrelli, Mauro (2018) Effects of 1D and 2D nanofillers in basalt/poly(lactic acid) composites for additive manufacturing. Composites Part B: Engineering, 153, pp. 364-375. ISSN (print) 1359-8368

Book

Moroz (Frost), I. and Augousti, A.T. (2018) Physics laboratory experiments : a manual for international students. Lviv, Ukraine : Lviv Polytechnic Publishing House. 120p. ISBN 9789669412799

Book Section

Ahmed, Asmau M, Duran, Olga, Zweiri, Yahya and Smith, Mike (2018) Quantitative analysis of petroleum hydrocarbon contaminated soils using spectroscopy, spectral unmixing and deep neural networks. In: Bruzzone, Lorenzo and Bovolo, Francesca, (eds.) Proceedings of SPIE : Image and Signal Processing for Remote Sensing XXIV. Washington, U.S. : SPIE. 10789 ISSN (print) 0277-786X ISBN 9781510621619

Brown, Kerry A., Gordon, Adam, Carvalho, Fabio and Yesuf, Gabriel (2018) Madagascar protected area prioritization : a road map for conservation. In: Goodman, Steven M. , Raherilalao, Marie Jeanne and Wohlhauser, Sebastien, (eds.) The terrestrial protected areas of Madagascar: their history, description, and biota. Antananarivo, Madagascar : Association Vahatra. pp. 1693-1705. ISBN 9782953892390

Dansoh, Clifford (2018) The use of renewable energy for the provision of power to operate reverse osmosis desalination facilities at Massawa. In: Eyvaz, Murat, (ed.) Desalination and Water Treatment. London, U.K. : Intech Open. pp. 177-197. ISBN 9781789237580

Howard, Donald, Duran, Olga and Hunter, Gordon (2018) A low-cost multi-modal sensor network for the monitoring of honeybee colonies/hives. In: Chatzigiannakis, Ioannis , Tobe, Yoshito , Novais, Paulo and Amft, Oliver, (eds.) Intelligent Environments 2018. Amsterdam, Netherlands : IOS Press BV. pp. 69-78. (Ambient Intelligence and Smart Enviroments, (23)) ISBN 9781614998730

Johnson, Steig E. and Brown, Kerry A. (2018) The specialist capuchin? Using ecological niche models to compare niche breadth in Mesoamerican primates. In: Kalbitzer, Urs and Jack, Katharine M., (eds.) Primate Life Histories, Sex Roles, and Adaptability : Essays in Honour of Linda M. Fedigan. Cham, Switzerland : Springer. pp. 311-329. (Developments in Primatology : Progress and Prospects) ISSN (print) 1574-3489 ISBN 9783319982854

Muppala, Siva and Madhav Rao, Vendra C. (2018) Numerical implementation and validation of turbulent premixed combustion model for lean mixtures. In: Mebel, A. and Azyazov, V., (eds.) MATEC Web of Conferences: International Conference on Combustion Physics and Chemistry (ComPhysChem'18). EDP Sciences. pp. 00004. 209 ISSN (online) 2261-236X

Radosz, Andrzej, Augousti, Andy T. and Gusin, Pawel (2018) Black but Not Dark. In: Capistrano, Abraao Jesse, (ed.) Essentials on Dark Matter. IntechOpen. pp. 43-63. ISBN 9781789236811

Conference or Workshop Item

A. Namadi, Sa'id, Pasquire, Christine and Manu, Emmanuel (2018) Positioning Quantity Surveyors in a collaborative production system. In: RICS COBRA 2018; 23 - 24 April 2018, London, U.K..

Ahmed, Sa'id, Pasquire, Christine and Manu, Emmanuel (2018) Evaluating why quantity surveyors conflict with collaborative project delivery system. In: 26th Annual Conference of the International Group for Lean Construction (IGLC); 16 - 20 Jul 2018, Chennai, India.

Cacciotti, Niccolo, Cifonelli, Antonio, Gaz, Claudio, Paduano, Valerio, Russo, Antonio V. and Vendittelli, Marilena (2018) Enhancing force feedback in teleoperated needle insertion through on-line identification of the needle-tissue interaction parameters. In: 2018 7th IEEE International Conference on Biomedical Robotics and Biomechatronics (Biorob); 26 - 29 Aug 2918, Enschede, The Netherlands.

Daniel, Doni, Iasi, Cristiano, Valenzuela, Erin, Cedillos-Barraza, Omar, Grasso, Salvatore, Zapata Solvas, Eugenio and Lee, Bill (2018) Structural stability of UHTCs in extreme environments. In: ICC7 : 7th International Congress on Ceramics : Ceramizing the Future for a Sustainable Society; 17 - 21 Jun 2018, Foz do Ighaçú, Brazil. (Unpublished)

Dansoh, Cliff (2018) Adding realism to the subject. In: Simply Better : Researching Assessment Practices – Improving Student Outcomes; 13 Sep 2018, Southampton, U.K.. (Unpublished)

Divall, S., Stallebrass, S.E., Goodey, R.J. and Ritchie, E.P. (2018) Development of layered models for geotechnical centrifuge tests. In: 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018); London, U.K., 17-20 Jul 2018.

Dombrovsky, Leonid, Dembele, Siaka, Wen, Jennifer X. and Sikic, Ivan (2018) Two-step iterative method for radiative transfer calculations in axisymmetric flames containing absorbing and scattering particles. In: 16th International Heat Transfer Conference; 10 - 15 Aug 2018, Beijing, China. (Unpublished)

Effendy, Marwan, Yao, Yufeng, Yao, Jun and Marchant, Denis R. (2018) Pin-fin shape and orientation effects on wall heat transfer predictions of gas turbine blade. In: The 5th International Conference on Engineering, Technology and Industrial Application; 12 - 13 Dec 2018, Surakarta, Indonesia.

Goodey, R.J. (2018) Physical modelling applied to infrastructure development. In: 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018); 17-20 Jul 2018, London, U.K..

Hughes, Annie, Downward, Stuart, Kyei, Chantal and Michener, Christina (2018) Exploring differential levels of confidence in assessment and feedback literacies amongst a diverse student body : a case-study of year 1 students at the start of their Higher Education experience in a post-1992 University. In: Simply Better : Researching Assessment Practices – Improving Student Outcomes; 13 Sep 2018, Southampton, U.K.. (Unpublished)

Le, B.T., Nadimi, S., Goodey, R.J. and Taylor, R.N. (2018) A study on performance of three-dimensional imaging system for physical models. In: 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018); 17-20 Jul 2018, London, U.K..

Muppala, Siva (2018) Problem based learning. In: Advance HE Teaching & Learning Conference 2018 : Teaching in the spotlight: Learning from global communities; 03 - 05 Jul 2018, Birmingham, U.K.. (Unpublished)

Muppala, Siva and Chandramohan, Balasubramanyam (2018) Teaching adaptations to student diversity. In: Festival of Learning (KUFoL18) : Supporting Student Success through Excellence in Learning and Teaching; 27 Jun 2018, Kingston, U.K.. (Unpublished)

Omer, Joshua R. (2018) Model tests on piled rafts-measured settlement compared with predictions from finite element and empirical methods. In: International Foundation Congress and Equipment Expo (IFCEE) 2018 Conference; 05-10 Mar 2018, Orlando, U.S..

Panchal, J.P., McNamara, A.M. and Goodey, R.J. (2018) Influence of geometry on the bearing capacity of sheet piled foundations. In: 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018); London, U.K., 17-20 Jul 2018.

Pierucci, G., Hosouli, Sahand, Messeri, M., Salvestroni, M., Fagioli, F., Taddei, F., Pourreza, A., Rashidi, H. and De Lucia, M. (2018) Realization of a test rig for small solar collectors and preliminary test. In: SolarPACES 2018 : International Conference on Concentrating Solar Power and Chemical Energy Systems; 02–05 Oct 2018, Casablanca, Morocco.

Sagias, V.D., Giannakopoulos, K.I. and Stergiou, C. (2018) Mechanical properties of 3D printed polymer specimens. In: 1st International Conference of the Greek Society of Experimental Mechanics of Materials; 10-12 May 2018, Athens, Greece.

Salvestroni, M., Pierucci, G., Fagioli, F., Pourreza, A., Messeri, M., Taddei, F., Hosouli, S., Rashidi, H. and Lucia, M. De (2018) Design of a seasonal storage for a solar district heating in Florence. In: 9th Edition of the International SOLARIS Conference (SOLARIS2018); 30–31 Aug 2018, Chengdu, China. (IOP Conference Series: Materials Science and Engineering, no. 556) ISSN (print) 1757-8981

Salvestroni, M., Pierucci, G., Fagioli, F., Pourreza, A., Messeri, M., Taddei, F., Hosouli, S., Rashidi, H. and Lucia, M. De (2018) Design of a small size PTC : computational model for the receiver tube and validation with heat loss test. In: 9th Edition of the International SOLARIS Conference (SOLARIS2018); 30–31 Aug 2018, Chengdu, China. (no. 1) ISSN (print) 1757-8981

Tanghetti, G., Goodey, R.J., McNamara, A.M. and Halai, H. (2018) Plate bearing tests for working platforms. In: 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018); 17-20 Jul 2018, London, U.K..

Udousoro, D. A. and Dansoh, Cliff (2018) Production of hydrogen using solar-powered electrolysis. In: World Renewable Energy Congress - WREC 2018; 31 Jul - 03 Aug 2018, Kingston, U.K..

Umar, Tariq (2018) A review of Occupational Safety and Health regulations in Oman. In: The 1st National Conference on Civil and Architectural Engineering; 26 - 28 Mar 2018, Muscat, Oman.

Umeokafor, Nnedinma (2018) Construction health and safety research in Nigeria : towards a sustainable future. In: Joint CIB W099 and TG59 International Safety, Health, and People in Construction Conference : Coping with the Complexity of Safety, Health and Wellbeing in Construction; 01 - 03 Aug 2018, Salvador, Brazil.

Zanni, Mariangela, Sharpe, Tim, Lammers, Philipp, Arnold, Leo and Pickard, James (2018) Standardization of whole life cost estimation for early design decision-making utilizing BIM. In: 35th CIB W78 2018 Conference : IT in Design, Construction, and Management; 01 - 03 Oct 2018, Chicago, Illinois, U.S..

Thesis

Dakhel, Mohammad (2018) Improving energy dissipation capacity of FRP and hybrid shear walls. (PhD thesis), Kingston University, .

Domun, Nadiim (2018) Improving ballistic impact performance of fibre reinforced polymer composite materials using nano-modified polymer matrix. (PhD thesis), Kingston University, .

Lyras, Konstantinos (2018) Numerical modelling of superheated jet atomisation. (PhD thesis), Kingston University, .

Nanayakkara, Visakha Kumari (2018) Investigation of the thumb and foldable palm interaction for optimum design of thumb assistive mechanisms. (PhD thesis), Kingston University, .