Items where Kingston Author is "Marchant, Denis"

Up a level
Export as [feed] Atom [feed] RSS
Group by: Item Type | No Grouping
Number of items: 28.


Effendy, M., Yao, Y.F., Yao, J. and Marchant, D.R. (2019) Detached eddy simulation of blade trailing-edge cutback cooling performance at various ejection slot angles. International Journal of Heat and Fluid Flow, 80, p. 108487. ISSN (print) 0142-727X

Riyadia, Tri Widodo Besar, Zhang, Tao, Marchant, Denis and Zhu, Xiaomeng (2019) NiAl–TiC–Al[sub]2O[sub]3 composite formed by self-propagation high-temperature synthesis process : combustion behaviour, microstructure, and properties. Journal of Alloys and Compounds, 805, pp. 104-112. ISSN (print) 0925-8388

Sarjito, Yogananda, Risky, Qomarun, Yao, Yufeng and Marchant, Denis (2019) Numerical simulation and experimental studies on residential home using evaporative cooling and vertical ventilation. International Journal of Mechanical Engineering and Technology, 10(3), pp. 89-101. ISSN (print) 0976-6340

Sarjito, Marchant, Denis, Yao, Yufeng and Binyamin (2019) The impact of multi-nozzles array on entrainment mass flow rate and homogeneity of the speed and profiles of heat. International Journal of Engineering & Technology, 8(1.1), pp. 66-70. ISSN (online) 2227-524X

Effendy, M., Yao, Y.F., Yao, J. and Marchant, D.R. (2016) DES study of blade trailing edge cutback cooling performance with various lip thicknesses. Applied Thermal Engineering, 99, pp. 434-445. ISSN (print) 1359-4311

Sedyono, Joko, Hadavinia, Homayoun, Venetsanos, Demetrios and Marchant, Denis R. (2015) Enumeration search method for optimisation of stacking sequence of laminated composite plates subjected to buckling. Open Engineering, 5(1), ISSN (online) 2391-5439

Riyadi, T.W.B., Zhang, T., Marchant, D. and Zhu, X. (2014) Synthesis and fabrication of NiAl coatings with Ti underlayer using induction heating. Surface and Coatings Technology, 258, pp. 154-159. ISSN (print) 0257-8972

Sarjito and Marchant, Denis (2013) A study of a multi-stage downdraught evaporative cooling device using CFD to assess the effect of the primary inlet to mixing stack area ratio: Preliminary work to establish the baseline performance of the device. Applied Mechanics and Materials, 465-6, pp. 248-254. ISSN (print) 1660-9336

Zhu, Xiaomeng, Zhang, Tao, Marchant, Denis and Morris, Valerie (2012) Combustion synthesis of Ni/Al base composites. Advanced Materials Research, 545, pp. 50-55. ISSN (print) 1022-6680

Zhu, X, Zhang, T., Marchant, D. and Morris, V. (2011) The structure and properties of NiAl formed by SHS using induction heating. Materials Science and Engineering A, 528(3), pp. 1251-1260. ISSN (print) 0921-5093

Kusztelan, A, Yao, Y., Marchant, D.R. and Wang, Y. (2011) A Review of Novel Turbocharger Concepts for Enhancements in Energy Efficiency. International Journal of Thermal & Environmental Engineering, 2(2), pp. 75-82.

England, J., Hadavinia, H., Marchant, D.R. and Aboutorabi, A. (2010) Design of Automotive Metal and Composite Chassis Structures. Recent Patents on Mechanical Engineering, 3(3), pp. 211-225. ISSN (print) 2212-7976

Zhu, X., Zhang, T., Marchant, D. and Morris, V. (2010) Combustion synthesis of TiC-NiAl composite by induction heating. Journal of the European Ceramic Society, 30(13), pp. 2781-2790. ISSN (print) 0955-2219

Zhu, X., Zhang, T., Morris, V. and Marchant, D. (2010) Combustion synthesis of NiAl/Al2O3 composites by induction heating. Intermetallics, 18(6), pp. 1197-1204. ISSN (print) 0966-9795

Kusztelan, A, Hadavinia, H. and Marchant, D.R. (2010) Recent Patents in Automotive Gull-Wing Door Hinge Mechanisms. Recent Patents on Mechanical Engineering, 3(1), pp. 51-64.

Ghasemnejad, H., Hadavinia, H., Marchant, D. and Aboutorabi, A. (2008) Energy absorption of thin-walled corrugated crash box in axial crushing. Structural Durability & Health Monitoring, 4(1), pp. 29-46. ISSN (print) 1930-2983

Book Section

Kusztelan, A., Marchant, Denis, Yao, Yufeng and Wang, Yawei (2013) Investigating the effects on the low speed response of a pressure charged IC engine through the application of a twin-entry turbine housing. In: Yang, Gi-Chul , Ao, Sio-long and Gelman, Len, (eds.) IAENG Transactions on Engineering Technologies. Springer Netherlands. pp. 201-213. (Lecture Notes in Electrical Engineering, 229) ISSN (print) 1876-1100 ISBN 9789400761902

Conference or Workshop Item

Effendy, Marwan, Yao, Yufeng, Yao, Jun and Marchant, Denis R. (2018) Pin-fin shape and orientation effects on wall heat transfer predictions of gas turbine blade. In: The 5th International Conference on Engineering, Technology and Industrial Application; 12 - 13 Dec 2018, Surakarta, Indonesia.

Hadavinia, Homayoun and Marchant, Denis (2015) Fatigue performance of fibre reinforced plastic (FRP) and the "lesson" learnt for automotive chassis design. In: Lightweight Chassis & Frame Design; 18-20 May 2015, Wiesbaden,Germany. (Unpublished)

Effendy, Marwan, Yao, Yufeng, Yao, Jun and Marchant, Denis R. (2014) Predicting film cooling performance of trailing-edge cutback turbine blades by detached eddy simulation. In: 52nd Aerospace Sciences Meeting; 13 -17 Jan 2014, National Harbor, Maryland, U.S..

Marchant, Denis, Kusztelan, Alex, Yao, Yufeng and Wang, Yawei (2013) Comparative study of turbine shaft speed for two alternative turbocharger types fitted to a light-duty CI engine. In: Trans & MOTAUTO'13 - XXI International Scientific and Technical Conference on Transport, Road-Building, Agricultural, Hoisting & Hauling and Military Technics and Technologies; 01 - 02 Jul 2013, Varna, Bulgaria.

Sarjito, S and Marchant, Denis (2013) Effect of downdraught mass flow rate generated and the uniformity of the velocity and temperature profiles downstream of the multi-array nozzles. In: 13th International Conference on Quality in Research (QiR) 2013, Yogyakarta, Indonesia; 25 - 28 Jun 2013, Yogyakarta, Indonesia. (Proceeding of the 13th International Conference on QIR (Quality in Research)) ISSN (online) 1411-1284

Kusztelan, A, Marchant, D.R., Yao, Y., Wang, Y., Selcuk, S and Gaikwad, A (2012) Increases in Low Speed Response of an IC Engine using a Twin-entry Turbocharger. In: World Congress of Engineering; 04 - 06 Jul 2012, London, U.K.. ISBN 9789881925220

Sedyono, J., Hadavinia, H., Deng, J., Marchant, D.R. and Garcia, J. (2012) Optimization of the stacking sequence of laminated composite plates under buckling loads. In: XVII International Conference: Mechanics of Composite Materials; 28 May - 1 Jun 2012, Riga, Latvia.

Turner, D, Yao, Y. and Marchant, D. (2012) Motorcycle Aerodynamic Performance Improvement through Belly Pan Design Evaluation and Testing. In: SAE 2012 World Congress; 24-26 Apr 2012, Detroit, Michigan, U.S..

Soroush, V.R., Ghasemnejad, Hessam, Marchant, D.R. and Aboutorabi, A. (2011) Advanced application of natural fibres in high performance automotive composite structures. In: The Nineteenth Annual International Conference on COMPOSITES/NANO ENGINEERING (ICCE-19); 24 - 30 Jul 2011, Shanghai, China. (Unpublished)

Kusztelan, A, Yao, Y., Marchant, D.R. and Wang, Y. (2011) Increasing low speed engine response of a downsized CI engine equipped with a Twin-entry Turbocharger. In: Ricardo User Conference 2011; 2011 (5th April), Germany. (Submitted)

Kusztelan, A, Yao, Y., Marchant, D.R. and Wang, Y. (2010) A Review of Novel Turbocharger Concepts for Enhancements in Energy Efficiency. In: International Conference on Energy, Water, and Environment; 2010 (Dec 12-15), Amman, Jordan.

This list was generated on Tue Sep 22 05:22:22 2020 BST.