Items where Kingston Author is "Wang, Jian"

Up a level
Export as [feed] Atom [feed] RSS
Group by: Item Type | No Grouping
Number of items: 94.

Article

Lin, Yujing, Wang, Jian and Augousti, Andy (2024) Embedded large eddy simulation of boundary layer transition behind a micro-ramp. Engineering Applications of Computational Fluid Mechanics, 18(1), p. 2350745. ISSN (print) 1994-2060

Wang, Qiao, Lin, Xiaodan, Lin, Yujing, Ma, Junlin, Xiao, Jingping, Wu, Yingchun and Wang, Jian (2021) Effects of surface roughness on splashing characteristics of large droplets with digital inline holographic imaging. Cold Regions Science and Technology, 191, p. 103373. ISSN (print) 0165-232X

Bhatia, Dinesh, Zhao, Yingxue, Yadav, Devinder and Wang, Jian (2021) Drag reduction using biomimetic sharkskin denticles. Engineering, Technology and Applied Science Research, 11(5), pp. 7665-7672. ISSN (print) 2241-4487

Lin, Yujing, Wang, Jian and Savill, Mark (2021) Embedded large eddy simulation of transitional flow over NACA0012 aerofoil. Proceedings of the Institution of Mechanical Engineers, Part G, Journal of Aerospace Engineering, 235(2), pp. 189-204. ISSN (print) 0954-4100

Bhatia, Dinesh, Li, Guangning, Sun, Jing and Wang, Jian (2021) Laminar flow control and drag reduction using biomimetically inspired forward facing steps. Journal of Applied and Computational Mechanics, 7(2), pp. 752-763. ISSN (online) 2383-4536

Bhatia, D., Li, G., Lin, Y., Sun, P., Li, H. and Wang, J. (2020) Transition delay and drag reduction using biomimetically inspired surface waves. Journal of Applied Fluid Mechanics, 13(4), pp. 1207-1222. ISSN (print) 1735-3572

Li, Guangning, Bhatia, Dinesh and Wang, Jian (2020) Compressive properties of min-mod-type limiters in modelling shockwave-containing flows. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, p. 290. ISSN (print) 1678-5878

Farzaneh, R, Dansoh, C, Augousti, A and Wang, J (2020) A review of UAE native seaweed as potential bio-refinery feedstock for jet fuel and high value chemicals. Advance in Environmental Waste Management & Recycling, 3(1), pp. 10-15. ISSN (online) 2641-1784

Bhatia, D and Wang, J (2019) Biomimetics : a potential solution to drag reduction in modern aerodynamics. Global Journal of Engineering Sciences, 3(4), ISSN (online) 2641-2039

Wang, Kehao, Venetsanos, Demetrios, Wang, Jian and Pierscionek, Barbara K. (2018) Combined use of parallel-plate compression and finite element modeling to analyze the mechanical properties of intact porcine lens. Journal of Mechanics in Medicine and Biology, 18(7), p. 1840013. ISSN (print) 0219-5194

Ismail, Mohd Azmi and Wang, Jian (2018) Effect of nozzle rotation angles and sizes on thermal characteristic of swirl anti-icing. Journal of Mechanical Science and Technology, 32(9), pp. 4485-4493. ISSN (print) 1738-494X

Vienescu, D.N., Wang, J., Le-Gresley, A. and Nixon, J.D. (2018) A life cycle assessment of options for producing synthetic fuel via pyrolysis. Bioresource Technology, 249, pp. 626-634. ISSN (print) 0960-8524

Wang, Kehao, Venetsanos, Demetrios T., Wang, Jian, Augousti, Andy T. and Pierscionek, Barbara K. (2017) The importance of parameter choice in modelling dynamics of the eye lens. Scientific Reports, 7, p. 16688. ISSN (online) 2045-2322

Li, Zheng, Bai, Fengyu, Zhang, Wei and Wang, Jian (2017) Mechanical properties of LY-12 connecting structure : influence of corrosion and quenching. Science of Advanced Materials, 9(6), pp. 999-1014. ISSN (print) 1947-2935

Wang, Kehao, Venetsanos, Demetrios, Wang, Jian and Pierscionek, Barbara (2016) Gradient moduli lens models : how material properties and application of forces can affect deformation and distributions of stress. Scientific Reports, 6, p. 31171. ISSN (online) 2045-2322

Ozdemir, Nazli G., Zhang, Tao, Hadavinia, Homayoun, Aspin, Ian and Wang, Jian (2015) Rheological properties, cure characteristics, and morphology of acrylonitrile-based nanorubber modified epoxy. Journal of Applied Polymer Science, 132(18), ISSN (print) 0021-8995

Bhatia, Dinesh, Yang, Guang Jun, Sun, Jing and Wang, Jian (2014) Effect of leading edge geometry on boundary layer transition : an experimental approach. Applied Mechanics and Materials, 590, pp. 53-57. ISSN (print) 1660-9336

Ives, Anthony O., Wang, Jian, Raghunathan, Srinivasan and Sloan, Patrick (2011) Heat transfer through a idealised bias flow acoustic liner. Journal of Thermophysics and Heat Transfer, 25(3), pp. 404-423. ISSN (print) 0887-8722

Ives, Anthony O., Wang, Jian, Raghunathan, Srinivasan and Sloan, Patrick (2011) Heat transfer through a single hole bias flow acoustic liner. Journal of Thermophysics and Heat Transfer, 25(3), pp. 409-423. ISSN (print) 0887-8722

David-West, O. S., Wang, J. and Cooper, R. (2011) Model updating of an enclosure using imaginary elements. Applied Mechanics and Materials, 70, pp. 309-314. ISSN (print) 1662-7482

David-West, O. S., Wang, J. and Cooper, R. (2010) Finite element model updating of a thin wall enclosure under impact excitation. Applied Mechanics and Materials, 24-25, pp. 337-342. ISSN (print) 1660-9336

Lu, Zhenzhou, Song, Jun, Song, Shufang, Yue, Zhufeng and Wang, Jian (2010) Reliability sensitivity by method of moments. Applied Mathematical Modelling, 34(10), pp. 2860-2871. ISSN (print) 0307-904X

Xia, Changho, Wang, Jian and McMenemy, Karen (2010) Short, medium and long term load forecasting model and virtual load forecaster based on radial basis function neural networks. International Journal of Electrical Power & Energy Systems, 32(7), pp. 743-750. ISSN (print) 0142-0615

HAN, Tong-wei, He, Peng-fei, Wang, Jian and Wu, Ai-hui (2010) Molecular dynamics simulation of single graphene sheet under tension. New Carbon Materials, 25(4), pp. 261-266. ISSN (print) 1872-5805

Sloan, B, Wang, J, Spence, S, Raghunathan, S and Riordan, D (2010) Aerodynamic performance of bypass engine with nozzle exit area change by warped chevrons. Proceedings of the Institution of Mechanical Engineers, Part G, Journal of Aerospace Engineering, 224(6), pp. 731-743. ISSN (print) 0954-4100

Li, Wenqiang, Li, Yan, Wang, Jian and Liu, Xiaoying (2010) The process model to aid innovation of products conceptual design. Expert Systems with Applications, 37(5), pp. 3574-3587. ISSN (print) 0957-4174

Chang, N., Wang, W., Yang, W. and Wang, J. (2010) Ply stacking sequence optimization of composite laminate by permutation discrete particle swarm optimization. Structural and Multidisciplinary Optimization, 41(2), pp. 179-187. ISSN (print) 1615-147X

Tongwei, HAN, Pengfei, HE, Wang, J and Aihui, WU (2010) The effect of vacancy defects on the tensile mechanical properties of single graphene sheets. Journal of Tongji University, 38(8), pp. 1210-1214.

Li, W, Li, Y, Wang, J and Xiong, Y (2009) Functional solving process model toward product innovation design based on a functional solving model with multiple elements and evolutions. Proceedings of the Institution of Mechanical Engineers, Part B Journal of Engineering Manufacture, 223(12), pp. 1601-1614. ISSN (print) 0954-4054

Han, T. W., He, P. F., Wang, J. and Wu, A.H. (2009) Numerical simulation of temperature dependence of tensile mechanical properties for single graphene sheet. Journal of Tongji University (Natural Science), 37(12), ISSN (print) 0253-374X

Han, T. W., He, P. F., Wang, J., Zheng, B. L. and Wu, A. H. (2009) Strain rate dependences of tensile failure process for single graphene sheet: a molecular dynamics study. Science in China Series G: Physics, Mechanics & Astronomy, 39(9), pp. 1312-1319. ISSN (print) 1672-1780

Han, T.W., He, P.F., Wang, J. and Zheng, B.L. (2009) Molecular dynamics simulation of beta-SiC nanowire under uniaxial tension. Chinese Journal of Materials Research, 23(4), pp. 337-342. ISSN (print) 1005-3093

Tan, Xincai, Chen, Xiaogang, Wang, Jian and Raghunathan, Srinivasan (2009) Energy absorption and deformation in textile composite cellular structures. AIAA Journal: devoted to aerospace research and development, 47(3), pp. 790-795. ISSN (print) 0001-1452

Lu, Zhenzhou, Song, Shufang, Yue, Zhufeng and Wang, Jian (2008) Reliability sensitivity method by line sampling. Structural Safety, 30(6), pp. 517-532. ISSN (print) 0167-4730

Tan, Xincai, Yan, Xiu-Tan, Juster, Neal P., Raghunathan, Srinivasan and Wang, Jian (2008) Dynamic friction model and its application in flat rolling. Journal of Materials Processing Technology, 207(1-3), pp. 222-234. ISSN (print) 0924-0136

Ji, Hua, Li, Yi and Wang, Jian (2008) A software oriented CNC system based on Linux/RTLinux. International Journal of Advanced Manufacturing Technology, 39(3-4), pp. 291-301. ISSN (print) 0268-3768

Cassidy, Matthew, Cooper, Richard, Gault, Richard and Wang, Jian (2008) Evaluation of standards for transmission loss tests. Journal of the Acoustical Society of America, 123(5), p. 3190. ISSN (print) 0001-4966

Chen, Jian, Li, Yan and Wang, Jian (2008) Simultaneous optimization of fuel consumption and emissions for a parallel hybrid electric SUV using fuzzy logic control. International Journal of Vehicle Design, 46(2), pp. 204-218. ISSN (print) 0143-3369

Xu, B.X., Yue, Z.F. and Wang, J. (2007) Indentation fatigue behaviour of polycrystalline copper. Mechanics of Materials, 39(12), pp. 10667-1080. ISSN (print) 0167-6636

Wang, Y.F., Yue, Z.F. and Wang, J. (2007) Experimental and numerical study of the superelastic behaviour on NiTi thin-walled tube under biaxial loading. Computational Materials Science, 40(2), pp. 246-254. ISSN (print) 0927-0256

Li, Yan, Wang, Jian, Li, Xianglong and Zhao, Wu (2007) Design creativity in product innovation. International Journal of Advanced Manufacturing Technology, 33(3-4), pp. 213-222. ISSN (print) 0268-3768

Wang, Y.F., Yue, Z.F. and Wang, J. (2007) Numerical study of effect of surface roughness on superelastic behaviour of shape memory alloys. Materials Science and Engineering: A, 458(1-2), pp. 312-318. ISSN (print) 0921-5093

Tian, Y. S., Wang, J and Lu, T. J. (2007) Axial load capacity of cold-formed steel wall stud with sheathing. Thin-Walled Structure, 45(5), pp. 537-551. ISSN (print) 0263-8231

Boyle, Mark, Cassidy, Matthew, Cooper, Richard, Gault, Richard and Wang, Jian (2007) An investigation into the relationship between sound intensity and normal surface velocity. Journal of the Acoustical Society of America, 121(5), p. 3155. ISSN (print) 0001-4966

Wang, Y.F., Yue, Z.F. and Wang, J. (2007) The effect of grain orientation on the tensile-compressive asymmetry of polycrystalline NiTi shape memory alloy. Material science and engineering technology, 38(4), pp. 294-298. ISSN (print) 0933-5137

Jiang, Y.P., Guo, W. L., Yue, Z. F. and Wang, J. (2006) On the study of the effects of notch shape on creep damage development under constant loading. Materials Science and Engineering A, 437(2), pp. 340-347. ISSN (print) 0921-5093

Wang, J., Lu, T.J., Woodhouse, J., Langley, R.S. and Evans, J. (2005) Sound transmission through lightweight double-leaf partitions: theoretical modelling. Journal of Sound & Vibration, 286(4-5), pp. 817-847. ISSN (print) 0022-460X

Wang, J., Tian, Y. S. and Lu, T. J. (2005) The role of frame members and sheathing in partition wall panels subject to compression. Thin-Walled Structure, 43(6), pp. 983-1002. ISSN (print) 0263-8231

Qiu, Hua, Lin, Chang-Jun, Li, Zi-Ye, Ozaki, Hiroaki, Wang, Jian and Yue, Yong (2005) A universal optimal approach to cam curve design using uniform B-splines. Mechanism and Machine Theory, 40(6), pp. 669-692. ISSN (print) 0094-114X

Yao, H., Butterfield, J., Raghunathan, S., Wang, J., Cooper, R. and Benard, E. (2005) Optimization design for thrust reverser cascade with a view to reduce noise. Multidiscipline Modelling in Materials and Structures, 1(1), pp. 63-72. ISSN (print) 1573-6105

Tian, Y. S., Wang, J. and Lu, T. J. (2004) Racking strength and stiffness of cold-formed steel wall frames. Journal of Constructional Steel Research, 60(7), pp. 1069-1093. ISSN (print) 0143-974X

Tian, Y. S., Wang, J., Lu, T. J. and Barlow, C. Y. (2004) An experimental study on the axial behaviour of cold-formed steel wall studs and panels. Thin-Walled Structures, 42(4), pp. 557-573. ISSN (print) 0263-8231

Qiu, H., Li, Y.-B., Cheng, K., Li, Y. and Wang, J. (2000) A study on an evaluation method for form deviations of 2D contours from coordinate measurement. The International Journal of Advanced Manufacturing Technology, 16(6), pp. 413-423. ISSN (print) 0268-3768

Qiu, H, Li, Y, Cheng, K, Li, Y. B. and Wang, J (2000) An approach to form deviation evaluation for CMM measurement of 2D curve contours. Journal of Materials Processing Technology, 107(1-3), pp. 119-126. ISSN (print) 0924-0136

Conference or Workshop Item

Mussa, Ifrah, Wang, Qiao, Lin, Yujing and Wang, Jian (2021) Comparison criteria for ice accretion on an aerofoil surface. In: 14th World Congress of Computational Mechanics and ECCOMAS Congress; 11-15 Jan 2021, Held online.

Lin, Yujing and Wang, Jian (2021) Effect of step surface imperfections on boundary layer transition. In: 14th World Congress of Computational Mechanics and ECCOMAS Congress; 11-15 Jan 2021, Held online.

Sharif Moghadam, Sharon, Lin, Yujing and Wang, Jian (2020) Computational investigation on airframe noise generation around high-lift devices. In: AIAA AVIATION 2020 Forum; 15 - 19 Jun 2020, Online.

Abbadi, Muram, Mussa, Ifrah, Lin, Yujing and Wang, Jian (2020) Preliminary analysis of ice accretion prediction on wind turbine blades. In: AIAA Scitech 2020 Forum; 06 - 10 Jan 2020, Orlando, U.S..

David-West, O. S., Wang, J and Cooper, R. (2011) Model updating of an enclosure using imaginary elements. In: EMex 2011, the BSSM’s annual Exhibition of Experimental Mechanics; 7-9 September 2011, Edinburgh, UK.. (Submitted)

David-West, O. S., Wang, J. and Cooper, R. (2011) Model updating of an enclosure using imaginary elements. In: 8th International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation for Validation; 7-9 Sep 2011, Edinburgh, Scotland. (Unpublished)

David-West, O. S., Wang, J and Cooper, R. (2010) Finite element model updating of a thin wall enclosure under impact excitation. In: 7th BSSM International Conference on Advances in Experimental Mechanics,; 07 - 09 September 2010, Liverpool, U.K..

Bell, M, Cooper, R., Houston, G. and Wang, J (2010) Numerical modelling of acoustic sources. In: RAeS Aerodynamics Conference Applied Aerodynamics: Capabilities and Future Requirements; 27-28 Jul 2010, Bristol, U.K..

Chang, N., Yang, W., Wang, J. and Wang, W. (2010) Design optimization of composite wing box for flutter and stiffness. In: 48th AIAA Aerospace Sciences Meeting, Including the New Horizons Forum and Aerospace Exposition; 4 - 7 Jan 2010, Orlando, Florida, U.S.. (Unpublished)

Chen, J., Wang, J. and Cassidy, M. (2009) Experiment study and design of moveable partition wall. In: 3rd International Conference on Integrity, Reliability and Failure; 20-24 Jul 2009, Porto, Portugal. (Unpublished)

Gault, R., Cooper, R., David-West, O. S., Wang, J. and Tournour, M. (2009) Near-field acoustic holography applied to a loudspeaker pseudo engine source. In: The Sixteenth International Congress on Sound and Vibration; 5-9 July 2009, Krakow, Poland. (Unpublished)

Gault, R., Cooper, R., Boyle, M., Wang, J. and Tournour, M. (2009) A comparative study of near-field acoustic holography and intensity techniques applied to a loudspeaker source. In: The Sixteenth International Congress on Sound and Vibration; 5-9 July 2009, Krakow, Poland. (Unpublished)

David-West, O. S., Wang, J., Gault, R. and Cooper, R. (2009) Numerical and experimental based comparison of the dynamic properties of enclosures with and without hole. In: The Sixteenth International Congress on Sound and Vibration; 5-9 July 2009, Krakow, Poland. (Unpublished)

Li, T., Li, Y. and Wang, J. (2009) Innovative form design based on functional attribute. In: 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 17th AIAA/ASME/AHS Adaptive Structures Conference, 11th AIAA Non-Deterministic Approaches Conference, 10th AIAA Gossamer Spacecraft Forum; 4 - 7 May 2009, Palm Springs, California, U.S.. (Unpublished)

Tan, Xincai, Wang, Jian, Xu, Yuchun, Curran, Ricky, Raghunathan, Srinivasan, Gore, David and Doherty, John (2008) Risk analysis in lifecycle costing of aluminium. In: 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference; 10-12 September 2008, British Columbia, Canada.

Tan, Xincai, Xu, Yunchun, Wang, Jian, Curran, Ricky, Raghunathan, Raghu, Gore, David and Doherty, John (2008) Life Cycle Assessment of Aluminium for Engineering Application. In: The 8th AIAA Aviation Technology, Integration, and Operations (ATIO) Conference,; 14 - 19 Sep 2008, Anchorage, Alaska.

Xu, Y ., Tan, X., Wang, J., Curran, R., Raghunathan, S., Doherty, J. and Gore, D. (2008) Manufacturing cost modeling for technology assessment. In: The 6th International Conference on Manufacturing Research; 09 - 11 Sep 2008, Uxbridge, U.K..

Wen, Jennifer, Dembele, Siaka, Yang, Manjiang, Tam, Vincent and Wang, Jian (2008) Numerical investigation on the effectiveness of water spray deluge in providing cooling, smoke dilution and radiation attenuation in fires. In: Ninth International Symposium on Fire Safety Science; 21 - 26 Sept 2008, Karlsruhe, Germany.

Xu, Y., Wang, J., Tan, X. and Curran, R. (2008) Cost-efficient materials in aerospace: composite vs aluminium. In: 15th ISPE International Conference on Concurrent Engineering (CE2008); 18-22 Aug 2008, Belfast, Northern Ireland.

Cassidy, Matthew, Gault, Richard, Cooper, Richard and Wang, Jian (2008) Design for sound transmission loss through an enclosure of a generator set. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Gault, Richard, Cooper, Richard, Wang, J and Collin, Graham (2008) Design tool methodology for simulation of enclosure cooling performance. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Boyle, Mark, Gault, Richard, Cooper, Richard and Wang, Jian (2008) Modelling correlated and uncorrelated sound sources. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Chen, Jian, Wang, Jian and Muckian, Gerard (2008) Sound transmission loss of movable double-leaf partition wall. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Gault, R., Cooper, R., Wang, J. and Collin, G. (2008) Using virtual engineering techniques to aid with design trade-off studies for an enclosed generator set. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Xu, Yuchen, Wang, Jian, Tan, Xincai, Curran, Ricky, Raghunathan, Srinivasan, Doherty, John and Gore, Dave (2008) A generic life cycle cost modeling approach for aircraft system. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Sloan, Brendan, Wang, Jian, Spence, Stephen and Raghunathan, Srinivasan (2008) Parametric analysis of variable nacelle nozzle throat area using warped chevrons. In: Gas turbine Technical Congress and Exposition: ASME Turbo Expo 2008; 9-13 Jun 2008, Berlin, Germany.

Wang, J., Lu, T. J., Gault, R.I., Tian, Y. S., Li, Y., Xia, C.H. and Tan, X.C. (2008) Sound Transmission Through Lightweight Double-Leaf Partitions: Systematic Parametric Analysis,. In: 5th International conference on thin-walled structures; 18-20 June 2008, Brisbane, Australia,. ISBN 9781741072396

Wang, J., Gault, R.I., McCaughan, C., Ives, A., Tian, Y. S., Lu, T. J., He, P. and Xia, C.H. (2008) Sound transmision through lightweight double-leaf partitions: 3D modelling. In: 5th International conference on thin-walled structures; 18-20 June 2008, Brisbane, Australia,. ISBN 9781741072396

Tan, X., Chen, X., Wang, J. and Raghunathan, S. (2008) Modelling energy absorption in textile composite cellular structures. In: 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference; 7-10 April, 2008, IL, USA.

Xu, Y, Wang, J, Tan, X, Early, J., Curran, R, Raghunathan, S, Doherty, J and Gore, D (2008) Life cycle cost modelling for aircraft wing using object-oriented systems engineering approach. In: 46th AIAA Aerospace Sciences Meeting and Exhibit; 7 - 10 Jan 2008, Reno, Nevada.

Liu, Y., Feng, Z., Yu, K., Yue, Z. and Wang, J. (2007) Influence of fuel pump failure on the fuel feeding stability of an aircraft fuel system. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Sloan, B., Wang, J., Raghunathan, S., Benard, E., Cooper, R. and Spence, S. (2007) Performance and acoustic optimisation of nacelle nozzle throat area. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Ives, A. O., Wang, J, Raghunathan, S, Benard, E. and Sloan, P. (2007) Three dimensional numerical solution of heat transfer in a honeycomb cell. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Tan, X., Xu, Y., Early, J., Wang, J., Curran, R. and Raghunathan, S. (2007) A framework for systematically estimating life cycle cost for integrated wing. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Curran, R., Gilmour, M., McAlleenan, C., Price, M., Kelly, P. and Wang, J. (2007) Development of a cost management system for evolving product definition. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Early, J., Wang, J., Curran, R., Price, M. and Raghunathan, S. (2007) Dynamic feedback models for whole life cost prediction. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Yu, K., Yue, Z. and Wang, J. (2007) Parametric modelling and multidisciplinary design optimization of 3-D internally cooled turbine blades. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Moore, R., Murphy, A., Price, M and Wang, J (2007) Analysis driven design and optimization methods for aircraft structures using finite element analysis. In: 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference; 23-26 Apr 2007, Waikiki, Hawaii.

Wang, Jian, Yao, Hui, Benard, Emmanuel, Cooper, Richard, Raghunathan, Srinivasan, Tweedie, James and Riordan, David (2005) Identification of aircraft noise at landing. In: 11th AIAA/CEAS Aeroacoustics Conference (26th AIAA Aeroacoustics Conference),; 23-25 May 2005, California, USA. ISBN 9781624100529

Monograph

Fern, A., Mason-Jones, A., Pham, D. T. and Wang, J. (1999) Design and Performance Predictability of Valve Stem Seals Using FEA. (Technical Report) Warrendale, PA., U.S. : SAE International. (SAE Technical Paper 1999-01-0883)

This list was generated on Fri Oct 11 06:01:55 2024 BST.