Items where Faculty is "Faculty of Science, Engineering and Computing > School of Engineering"

Up a level
Export as [feed] Atom [feed] RSS
Group by: First Author/Editor | Item Type | Year | No Grouping
Jump to: A | B | D | E | G | H | I | J | K | L | M | N | O | P | R | S | U | W | Z
Number of items: 63.


Abdellatif, A., Alfayad, S., Hildebrandt, Arne-Christoph, Ouezdou, F.B., Mechbal, N. and Zweiri, Yahya (2018) Development of a new hydraulic ankle for HYDROID humanoid robot. Journal of Intelligent & Robotic Systems, 92(2), pp. 293-308. ISSN (print) 0921-0296

Abdullahi, Bala, Elsayed, Ahmed, Al-Dadah, Raya, Mahmoud, Sa'ad, Mahrous, Abdel Fateh, Muhammad, Nura Mu'az and Abbakar, Saidu Bello (2018) Experimental and numerical investigation of thermosyphon heat pipe performance at various inclination angles. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 44(1), pp. 85-98. ISSN (online) 2289-7879

Ahmed, Asmau M, Duran, Olga, Zweiri, Yahya and Smith, Mike (2018) Quantitative analysis of petroleum hydrocarbon contaminated soils using spectroscopy, spectral unmixing and deep neural networks. In: Bruzzone, Lorenzo and Bovolo, Francesca, (eds.) Proceedings of SPIE : Image and Signal Processing for Remote Sensing XXIV. Washington, U.S. : SPIE. ISSN (print) 0277-786X ISBN 9781510621619

Al-Hashimi, Nihad, Begg, Nazish, Alany, Raid G., Hassanin, Hany and Elshaer, Amr (2018) Oral modified release multiple-unit particulate systems : compressed pellets, microparticles and nanoparticles. Pharmaceutics, 10(4), p. 176. ISSN (print) 1999-4923

Augousti, A T., Baker, A and Marlow, J-J (2018) Design and test firing of a dual bidirectional double vortex bipropellant rocket engine. Journal of Physics: Conference Series, 1065, p. 262002. ISSN (print) 1742-6588

Augousti, A T., Baker, A, Claus, M and Karaveckas, L (2018) Development of a high flow rate piston pump for rocket engines. Journal of Physics: Conference Series, 1065, p. 262003. ISSN (print) 1742-6588

Augousti, A T. and Trunins, J (2018) Experimental design of a system to investigate chaotic dripping. Journal of Physics: Conference Series, 1065, p. 262001. ISSN (print) 1742-6588

Augousti, Andy T., Gusin, Pawel, Kusmierz, Bartosz, Masajada, Jan and Radosz, Andrzej (2018) On the speed of a test particle inside the Schwarzschild event horizon and other kinds of black holes. General Relativity and Gravitation, 50(131), ISSN (print) 0001-7701

Awad, Mohammad I., Gan, Dongming, Hussain, Irfan, Az-Zu'bi, Ali, Stefanini, Cesare, Khalaf, Kinda, Zweiri, Yahya, Dias, Jorge and Seneviratne, Lakmal D. (2018) Design of a novel passive Binary-Controlled Variable Stiffness Joint (BpVSJ) towards passive haptic interface application. IEEE Access, 6, pp. 63045-63057. ISSN (online) 2169-3536

Awad, Mohammad I., Hussain, Irfan, Gan, Dongming, Az-zu'bi, Ali, Stefanini, Cesare, Khalaf, Kinda, Zweiri, Yahya, Taha, Tarek, Dias, Jorge and Seneviratne, Lakmal (2018) Passive Discrete Variable Stiffness Joint (pDVSJ-II) : modeling, design, characterization, and testing toward passive haptic interface. Journal of Mechanisms and Robotics, 11(1), 011005. ISSN (print) 1942-4302


Brown, Kerry A., Gordon, Adam, Carvalho, Fabio and Yesuf, Gabriel (2018) Madagascar protected area prioritization : a road map for conservation. In: Goodman, Steven M. , Raherilalao, Marie Jeanne and Wohlhauser, Sebastien, (eds.) The terrestrial protected areas of Madagascar: their history, description, and biota. Antananarivo, Madagascar : Association Vahatra. pp. 1693-1705. ISBN 9782953892390

Bulat, Mikhail, Bulat, Pavel, Denissenko, Petr, Esakov, Igor, Grachev, Lev, Volkov, Konstantin and Volobuev, Igor (2019) Experimental study of microwave streamer discharge ignition of premixed air/fuel mixtures. IEEE Transactions on Plasma Science, 47(1), pp. 57-61. ISSN (print) 0093-3813

Bulat, Pavel V., Mitchell, Samuel and Volkov, Konstantin N. (2018) Aerodynamic characteristics of an aerofoil in wide range of angles of attack. Journal of Engineering and Applied Sciences, 13(8 SI), pp. 6451-6461. ISSN (print) 1816-949X

Bulat, Pavel V. and Volkov, Konstantin N. (2018) Fluid/solid coupled heat transfer analysis of a free rotating disc. Archives of Thermodynamics, 39(3), pp. 169-192. ISSN (online) 2083-6023


Dansoh, Cliff (2018) Adding realism to the subject. In: Simply Better : Researching Assessment Practices – Improving Student Outcomes; 13 Sep 2018, Southampton, U.K.. (Unpublished)

Dansoh, Clifford (2018) The use of renewable energy for the provision of power to operate reverse osmosis desalination facilities at Massawa. In: Eyvaz, Murat, (ed.) Desalination and Water Treatment. London, U.K. : Intech Open. pp. 177-197. ISBN 9781789237580

De Iorio, Antonio, Grasso, Marzio, Penta, Francesco, Pucillo, Giovanni Pio, Rossi, Stefano and Testa, Mario (2018) On the ballast–sleeper interaction in the longitudinal and lateral directions. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 232(2), pp. 620-631. ISSN (print) 0954-4097

Dombrovsky, Leonid, Dembele, Siaka, Wen, Jennifer X. and Sikic, Ivan (2018) Two-step iterative method for radiative transfer calculations in axisymmetric flames containing absorbing and scattering particles. In: 16th International Heat Transfer Conference; 10 - 15 Aug 2018, Beijing, China. (Unpublished)

Dombrovsky, Leonid A., Dembele, Siaka, Wen, Jennifer X. and Sikic, Ivan (2018) Two-step method for radiative transfer calculations in a developing pool fire at the initial stage of its suppression by a water spray. International Journal of Heat and Mass Transfer, 127(B), pp. 717-726. ISSN (print) 0017-9310


Effendy, Marwan, Yao, Yufeng, Yao, Jun and Marchant, Denis R. (2018) Pin-fin shape and orientation effects on wall heat transfer predictions of gas turbine blade. In: The 5th International Conference on Engineering, Technology and Industrial Application; 12 - 13 Dec 2018, Surakarta, Indonesia.

ElShaer, Amr, Al-khattawi, Ali, Mohammed, Afzal R., Warzecha, Monika, Lamprou, Dimitrios A. and Hassanin, Hany (2018) Understanding the compaction behaviour of low-substituted HPC : macro, micro, and nano-metric evaluations. Pharmaceutical Development and Technology, 23(5), pp. 442-453. ISSN (print) 1083-7450


Galatas, Athanasios, Hassanin, Hany, Zweiri, Yahya and Seneviratne, Lakmal (2018) Additive manufactured sandwich composite/ABS parts for unmanned aerial vehicle applications. Polymers, 10(11), p. 1262. ISSN (online) 2073-4360

Grasso, Marzio, Azzouz, Lyes, Ruiz-Hincapie, Paula, Zarrelli, Mauro and Ren, Guogang (2018) Effect of temperature on the mechanical properties of 3D-printed PLA tensile specimens. Rapid Prototyping Journal, 24(8), pp. 1337-1346. ISSN (print) 1355-2546

Grasso, Marzio, Xu, Yigeng, Russo, Roberto and Rosiello, Vincenzo (2018) Mixed mode fatigue crack propagation behaviour of aluminium F357 alloy. Engineering Failure Analysis, 90, pp. 463-475. ISSN (print) 1350-6307

Gusin, Pawel, Augousti, Andy, Formalik, Filip and Radosz, Andrzej (2018) The (a)symmetry between the exterior and interior of a Schwarzschild black hole. Symmetry, 10(9), p. 366. ISSN (online) 2073-8994


Hassanin, Hany, Ahmed El-Sayed, Mahmoud, Elshaer, Amr, Essa, Khamis and Jiang, Kyle (2018) Microfabrication of net shape zirconia/alumina nanocomposite micro parts. Nanomaterials, 8(8), p. 593. ISSN (online) 2079-4991

Howard, Donald, Duran, Olga and Hunter, Gordon (2018) A low-cost multi-modal sensor network for the monitoring of honeybee colonies/hives. In: Chatzigiannakis, Ioannis , Tobe, Yoshito , Novais, Paulo and Amft, Oliver, (eds.) Intelligent Environments 2018. Amsterdam, Netherlands : IOS Press BV. pp. 69-78. (Ambient Intelligence and Smart Enviroments, no. 23) ISBN 9781614998730

Hughes, Annie, Downward, Stuart, Kyei, Chantal and Michener, Christina (2018) Exploring differential levels of confidence in assessment and feedback literacies amongst a diverse student body : a case-study of year 1 students at the start of their Higher Education experience in a post-1992 University. In: Simply Better : Researching Assessment Practices – Improving Student Outcomes; 13 Sep 2018, Southampton, U.K.. (Unpublished)


Ilankoon, I.M.S.K., Tang, Yuan, Ghorbani, Yousef, Northey, Stephen, Yellishetty, Mohan, Deng, Xiangyi and McBride, Diane (2018) The current state and future directions of percolation leaching in the Chinese mining industry : challenges and opportunities. Minerals Engineering, 125, pp. 206-222. ISSN (print) 0892-6875

Ismail, Mohd Azmi and Wang, Jian (2018) Effect of nozzle rotation angles and sizes on thermal characteristic of swirl anti-icing. Journal of Mechanical Science and Technology, 32(9), pp. 4485-4493. ISSN (print) 1738-494X


Javadinejad, Mahdi, Mashayekhi, Mohammad, Karevan, Mehdi and Hadavinia, Homayoun (2018) Using the equivalent fiber approach in two-scale modeling of the elastic behavior of carbon nanotube/epoxy nanocomposite. Nanomaterials, 8(9), p. 696. ISSN (online) 2079-4991

Johnson, Steig E. and Brown, Kerry A. (2018) The specialist capuchin? Using ecological niche models to compare niche breadth in Mesoamerican primates. In: Kalbitzer, Urs and Jack, Katharine M., (eds.) Primate Life Histories, Sex Roles, and Adaptability : Essays in Honour of Linda M. Fedigan. Cham, Switzerland : Springer. pp. 311-329. (Developments in Primatology : Progress and Prospects) ISSN (print) 1574-3489 ISBN 9783319982854

Junaid, Ali, Sanchez, Alejandro, Bosch, Javier, Vitzilaios, Nikolaos and Zweiri, Yahya (2018) Design and implementation of a dual-axis tilting quadcopter. Robotics, 7(4), p. 65. ISSN (online) 2218-6581


Kamliya Jawahar, Hasan, Lin, Yujing and Savill, Mark (2018) Large eddy simulation of airfoil self-noise using OpenFOAM. Aircraft Engineering and Aerospace Technology, 90(1), pp. 126-133. ISSN (print) 1748-8842

Khodadadi Azadboni, Reza, Heidari, Ali and Wen, Jennifer X. (2018) A computational fluid dynamic investigation of inhomogeneous hydrogen flame acceleration and transition to detonation. Flow, Turbulence and Combustion, 101(4), pp. 1009-1021. ISSN (print) 1386-6184

Kleinschmidt, Ross, Watson, Drew, Janik, Miroslaw and Gillmore, Gavin (2018) The presence and dosimetry of radon and thoron in a historical, underground metalliferous mine. Journal of Sustainable Mining, 17(3), pp. 120-130. ISSN (print) 2300-3960

Klippstein, Helge, Hassanin, Hany, Sanchez, Alejandro Diaz de Cerio, Zweiri, Yahya and Senevirante, Lakmal (2018) Additive manufacturing of porous structures for unmanned aerial vehicles applications. Advanced Engineering Materials, 20(9), p. 1800290. ISSN (print) 1438-1656

Klippstein, Helge, Sanchez, Alejandro Diaz De Cerio, Hassanin, Hany, Zweiri, Yahya and Seneviratne, Lakmal (2018) Fused deposition modelling for unmanned aerial vehicles : a review. Advanced Engineering Materials, 20(2), p. 1700552. ISSN (print) 1438-1656


Lyras, Konstantinos (2018) Numerical modelling of superheated jet atomisation. (PhD thesis), Kingston University, .


Matsika, Emmanuel, O'Neill, Conor, Grasso, Marzio and De Iorio, Antonio (2018) Selection and ranking of the main beam geometry of a freight wagon for lightweighting. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 232(2), pp. 495-513. ISSN (print) 0954-4097

Moroz (Frost), I. and Augousti, A.T. (2018) Physics laboratory experiments : a manual for international students. Lviv, Ukraine : Lviv Polytechnic Publishing House. 120p. ISBN 9789669412799

Muppala, Siva and Madhav Rao, Vendra C. (2018) Numerical implementation and validation of turbulent premixed combustion model for lean mixtures. In: Mebel, A. and Azyazov, V., (eds.) MATEC Web of Conferences: International Conference on Combustion Physics and Chemistry (ComPhysChem'18). EDP Sciences. pp. 00004. ISSN (online) 2261-236X

Muppala, Siva (2018) Problem based learning. In: Advance HE Teaching & Learning Conference 2018 : Teaching in the spotlight: Learning from global communities; 03 - 05 Jul 2018, Birmingham, U.K.. (Unpublished)


Nanayakkara, Visakha Kumari (2018) Investigation of the thumb and foldable palm interaction for optimum design of thumb assistive mechanisms. (PhD thesis), Kingston University, .


Omer, JR and Eghan, Ben A (2018) Numerical analysis of road pavement response. Advancements in Civil Engineering & Technology, 2(2), ISSN (online) 2639-0574

Omer, Joshua R. (2018) Model tests on piled rafts-measured settlement compared with predictions from finite element and empirical methods. In: International Foundation Congress and Equipment Expo (IFCEE) 2018 Conference; 05-10 Mar 2018, Orlando, U.S..


Percival, L.M.E., Jenkyns, H.C., Mather, T.A., Dickson, A.J., Batenburg, S.J., Ruhl, M., Hesselbo, S.P., Barclay, R., Jarvis, Ian, Robinson, S.A. and Woelders, L. (2018) Does large igneous province volcanism always perturb the mercury cycle? Comparing the records of Oceanic Anoxic Event 2 and the end-Cretaceous to other Mesozoic events. American Journal of Science, 318(8), pp. 799-860. ISSN (print) 0002-9599

Prieto-Campos, Antonio, Diaz-Cuevas, Pilar, Fernandez-Nunez, Miriam and Ojeda-Zujar, Jose (2018) Methodology for improving the analysis, interpretation, and geo-visualisation of erosion rates in coastal beaches - Andalusia, Southern Spain. Geosciences, 8(9), p. 335. ISSN (online) 2076-3263


Radosz, Andrzej, Augousti, Andy T. and Gusin, Pawel (2018) Black but Not Dark. In: Capistrano, Abraao Jesse, (ed.) Essentials on Dark Matter. IntechOpen. pp. 43-63. ISBN 9781789236811

Roudbeneh, Fatemeh Hassanpour, Liaghat, Gholamhossein, Sabouri, Hadi and Hadavinia, Homayoun (2018) Experimental investigation of quasistatic penetration tests on honeycomb sandwich panels filled with polymer foam. Mechanics of Advanced Materials and Structures, ISSN (print) 1537-6494 (Epub Ahead of Print)


Sagias, V.D., Giannakopoulos, K.I. and Stergiou, C. (2018) Mechanical properties of 3D printed polymer specimens. In: 1st International Conference of the Greek Society of Experimental Mechanics of Materials; 10-12 May 2018, Athens, Greece.

Samad, Shahab, Attaullah, Shah and Limbachiya, Mukesh C. (2018) Assessment of Punching Shear of Flat Slabs Using Ground Slag. ACI Materials Journal, 115(3), pp. 459-469. ISSN (print) 0889-325X

Smith, Matthew, Walford, Nigel Stephen and Jimenez-Bescos, Carlos (2018) Assessing the user response to differences in functionality when visualising 3D models of cultural heritage sites using the Technology Readiness Index. Digital Applications in Archaeology and Cultural Heritage, 10, e00076. ISSN (print) 2212-0548


Udousoro, D. A. and Dansoh, Cliff (2018) Production of hydrogen using solar-powered electrolysis. In: World Renewable Energy Congress - WREC 2018; 31 Jul - 03 Aug 2018, Kingston, U.K..

Umeokafor, Nnedinma and Windapo, Abimbola (2018) Challenges to and opportunities for establishing a qualitative approach to built environment research in higher education institutions. Journal of Engineering, Design and Technology, 16(4), pp. 557-580. ISSN (online) 1726-0531

Umeokafor, Nnedinma (2018) Community interventions in construction health and safety and the implications. Journal of Financial Management of Property and Construction, 23(3), pp. 312-329. ISSN (online) 1366-4387

Umeokafor, Nnedinma (2018) Construction health and safety research in Nigeria : towards a sustainable future. In: Joint CIB W099 and TG59 International Safety, Health, and People in Construction Conference : Coping with the Complexity of Safety, Health and Wellbeing in Construction; 01 - 03 Aug 2018, Salvador, Brazil.

Umeokafor, Nnedinma and Windapo, Abimbola Olukemi (2018) Understanding the underrepresentation of qualitative research approaches to built environment research in Nigeria. International Journal of Construction Education and Research, 14(3), pp. 198-217. ISSN (print) 1557-8771

Umeokafor, Nnedinma (2018) An investigation into public and private clients' attitudes, commitment and impact on construction health and safety in Nigeria. Engineering, Construction and Architectural Management, 25(6), pp. 798-815. ISSN (print) 0969-9988


Wang, Kehao, Venetsanos, Demetrios, Wang, Jian and Pierscionek, Barbara K. (2018) Combined use of parallel-plate compression and finite element modeling to analyze the mechanical properties of intact porcine lens. Journal of Mechanics in Medicine and Biology, 18(7), p. 1840013. ISSN (print) 0219-5194

Wei, Hong-Qiu, Chen, Ye, Zhang, Tao, Liu, Liwu, Qiao, Jinliang, Liu, Yanju and Leng, Jinsong (2018) Thermal, mechanical, and shape-memory properties of nanorubber-toughened, epoxy-based shape-memory nanocomposites. Journal of Applied Polymer Science, 135(6), p. 45780. ISSN (print) 0021-8995

Wyllie, Jamalia O.Y., Essah, Emmanuel A. and Ofetotse, Eng L. (2018) Barriers of solar energy uptake and the potential for mitigation solutions in Barbados. Renewable and Sustainable Energy Reviews, 91, pp. 935-949. ISSN (print) 1364-0321


Zotti, Aldobenedetto, Zuppolini, Simona, Tabi, Tamas, Grasso, Marzio, Ren, Gougang, Borriello, Anna and Zarrelli, Mauro (2018) Effects of 1D and 2D nanofillers in basalt/poly(lactic acid) composites for additive manufacturing. Composites Part B: Engineering, 153, pp. 364-375. ISSN (print) 1359-8368

This list was generated on Sun Aug 9 04:12:13 2020 BST.