Items where Faculty is "Faculty of Engineering (until 2011)"

Up a level
Export as [feed] Atom [feed] RSS
Group by: First Author/Editor | Item Type | Year | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | V | W | X | Y | Z
Number of items at this level: 662.

A

AINI, R., RAHNEJAT, H. and GOHAR, R. (1990) A five degrees of freedom analysis of vibrations in precision spindles. International Journal Of Machine Tools & Manufacture, 30(1), pp. 1-18. ISSN (print) 0890-6955

Abde Quader Alzu'bi, Hamzeh Mahmoud [Inventor], Abd Allateef, Imad [Inventor], Zweiri, Yahya [Inventor], Alkhateeb, Basim [Inventor] and Al-Majali, Yahya Taha Ayed [Inventor] (2013) King Abdullah II Design and Development Bureau Sided performance coaxial vertical takeoff and landing (vtol) uav and pitch stability technique using oblique active tilting (oat). US20130105620.

Aboutorabi, A., Ghasemnejad, H. and Hadavinia, H. (2010) Analytical approach for progressive failure crushing modes of woven FRP composite box structures. World Journal of Engineering, 7(3), pp. 154-162. ISSN (print) 1708-5284

Abulrub, Abdul-Hadi G., Sahinkaya, M. Necip, Keogh, Patrick S. and Burrows, Clifford R. (2005) Effective model reduction for magnetically levitated flexible rotors including contact dynamics. In: International Design Engineering Technical Conferences and Computers and Information in Engineering Conference; 24-28 Sep 2005, Long Beach, California, USA. (ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Volume 1) ISBN 0791847381

Abulrub, Abdul-Hadi G., Sahinkaya, M. Necip and Burrows, Clifford R. (2009) An adaptive weighting control strategy to avoid magnetic bearing contact. In: ASME 2009 Dynamic Systems and Control Conference; 12–14 Oct 2009, Hollywood, California, USA. (ASME 2009 Dynamic Systems and Control Conference) ISBN 9780791848920

Adjali, H., Davies, M. and Littler, J. (1998) Three-dimensional earth-contact heat flows: a comparison of simulated and measured data for a buried structure. In: World Renewable Energy Conference; Sept, 1998, Florence, Italy.

Adjali, H., Davies, M., Rees, R.W. and Littler, J. (1999) The testing of a numerical model's ability to simulate heat transfer from slab-on-grade floors and the implication for low-energy design. In: Proceedings of the National Passive Solar Conference 1999; 12 -16 Jun 1999, Portland, U.S.A.. ISBN 9780895531711

Adjali, M.H., Davies, M., Ni Riain, C. and Littler, J.G. (2000) In-situ measurements and numerical simulation of heat transfer beneath a heated ground floor slab. Energy and Buildings, 33(1), pp. 75-83. ISSN (print) 0378-7788

Adjali, M.H., Davies, M. and Littler, J. (1998) Review paper - Earth-contact heat flows: Review and application of design guidance prediction. Building Services Engineering Research and Technology, 19(3), pp. 111-121. ISSN (print) 0143-6244

Adjali, M.H., Davies, M., Rees, S.W. and Littler, J. (2000) Temperatures in and under a slab-on-ground floor: two- and three-dimensional numerical simulations and comparison with experimental data. Building and Environment, 35(7), pp. 655-662. ISSN (print) 1360-1323

Adjali, M.H., Davies, M. and Littler, J. (1998) Three-dimensional earth-contact heat flows: a comparison of simulated and measured data for a buried structure. Renewable Energy, 15(1-4), pp. 356-359. ISSN (print) 0960-1481

Adjali, M.H., Davies, M. and Rees, S.W. (2004) A comparative study of design guide calculations and measured heat loss through the ground. Building and Environment, 39(11), pp. 1301-1311. ISSN (print) 0360-1323

Adjali, M.H., Davies, M. and Littler, J. (1999) A numerical simulation of measured transient temperatures in the walls, floor and surrounding soil of a buried structure. International Journal of Numerical Methods for Heat & Fluid Flow, 9(4), pp. 405-423. ISSN (print) 0961-5539

Adnan, A, Cazan, A, Safa, M., Lung, A. W. M. and Williams, G. (2009) Evaluation of potential manufacturing suppliers using analytical hierarchy process and cluster analysis for benchmarking. International Journal of Security, 3(3), pp. 36-47. ISSN (online) 1985-2320

Adnan, A, Cazan, A, Safa, M. and Lung, A. W. M. (2009) Guidelines for benchmarking and manufacturing level agreement for outsourcing. In: Advances in Computing and Technology; Jan 2009, London, U.K.. ISBN 9780955000867

Adnan, Adnan (2011) Development of outsourcing decision models for small and medium sized manufacturing companies. (PhD thesis), Kingston University.

Ahmed, A., Fried, A.N., Limbachiya, M.C. and Roberts, J.J. (2004) Advantages and implications of high performance low density aircrete product for the UK construction industry. In: 13th International Brick/Block Masonry Conference; 4- 7 July 2004, Amsterdam, Netherlands.

Ahmed, A., Fried, A.N., Limbachiya, M.C. and Roberts, J.J. (2005) Flexural strength of low-density blockwork. In: 4th International Conference on Autoclaved Aerated Concrete; 8 - 9 Sept 2005, Kingston, U.K.. ISBN 9780415383561

Ahmed, A., Fried, A.N., Limbachiya, M.C. and Roberts, J.J. (2005) Moisture content, absorption and movement of low-density aircrete. In: 4th International Conference on Autoclaved Aerated Concrete; Sept 2005, Kingston, U.K.. ISBN 9780415383561

Al-Khazali, H. A. H. and Askari, M. R. (2011) Application of modal testing and finite element modelling in rotating structures. In: 2nd International Conference on Modelling and Simulations (ICOMOS - VF) Virtual Forum 2011; 11-25 Jul 2011, Naples, Italy. (Unpublished)

Ala, S.R., Chamberlain, D. and Ellis, T.J. (1992) Real time inspection of masonry units. In: International Conference on Image Processing and its Applications; 7 - 9 Apr 1992, Maastricht, The Netherlands. ISBN 0852965435

Alcantara-Ayala, I., Dykes, A.P. and Garnica-Peña, R.J. (2009) Hurricane Earl, chronicle of a Mexican foretold landslide disaster. In: 7th International Conference on Geomorphology; 06-11 July 2009, Melbourne, Australia.

Alcantara-Ayala, I. and Dykes, A. P. (2010) Introduction: Land use change in the tropics: causes, consequences and monitoring in Mexico. Singapore Journal Of Tropical Geography, 31(2), pp. 143-151. ISSN (print) 0129-7619

Althoefer, Kaspar [Inventor], Zweiri, Yahya H. [Inventor], Seneviratne, Lakmal [Inventor] and Tan, Choo Par [Inventor] (2005) Kings College London Method of estimating parameters of a medium to be moved by a digging apparatus. WO2005/103396.

Aluri, N.K., Sha, Q, Muppala, S.P.R. and Dinkelacker, F. (2005) Flame surface density models - A numerical evaluation. In: European Combustion meeting; 3 - 6 Apr 2005, Louvain-la-Neuve, Belgium.

Aluri, N.K., Muppala, S. and Dinkelacker, F. (2008) Large-eddy simulation of lean premixed turbulent flames of three different combustion configurations using a novel reaction closure. Flow, Turbulence and Combustion, 80(2), pp. 207-224. ISSN (print) 1386-6184

An, Liantong, Gao, Yang and Zhang, Tao (2007) Effect of powder injection location on ceramic coatings properties when using plasma spray. Journal of Thermal Spray Technology, 16(5-6), pp. 967-973. ISSN (print) 1059-9630

Askari, M.R. and Davis, R. (1998) Development and application of computer software for simulation of vibration analysis in education. In: International Conference on Simulation; 30 Sep - 02 Oct 1998, York, UK. ISSN (online) 0537-9989

Ayan, V., Khavandi, A. and Nikzad Gharehaghaji, A. (2009) In-plant asphalt cold recycling in rehabilitation of Babaei expressway project. In: Loizos, Andreas , Partl, Manfred N. , Scarpas, Tom and Alqadi, Imad L., (eds.) Advanced Testing and Characterization of Bituminous Materials. Wiltshire : Taylor & Francis Group, London. pp. 1169-1178. ISBN 9780415558549

Ayan, V., Limbachiya, M.C. and Nasr Azadani, S.M. (2011) Influence of recycled concrete aggregates on specific gravity and absorption rates of mixes. In: 26th International Conference on Solid Waste Technology and Management; 27-30 Mar 2011, Philadelphia, PA, U.S.A..

Ayan, V., Nasr Azadani, S.M. and Limbachiya, M.C. (2010) A new experience in rehabilitation with in-plant asphalt cold recycling. In: 7th International Slurry Surfacing Association World Congress; 13-14 Oct 2010, Lyon, France. (Unpublished)

Ayan, V., Azadani, S.M.N., Omer, J. R. and Limbachiya, M.C. (2011) A study into the absorption property of recycled concrete and reclaimed asphalt pavement mixes. In: 5th International Conference: Bituminous Mixtures and Pavements; 1-3 June 2011, Thessaloniki, Greece. (Unpublished)

Ayan, Vahid, Limbachiya, Mukesh C. and Nasr Azadani, Seyed Masoud (2011) Investigation of water absorption in recycled aggregates for application in subbase layer of highway. In: GeoHunan International Conference: Emerging Technologies for Material, Design, Rehabilitation, and Inspection of Roadway Pavements; 9 - 11 June 2011, Hunan, China.

Ayati, Seyedeh Bentolhoda (2009) Control algorithm for emission tests. (MSc(R) thesis), Kingston University.

Azarafza, R., Khalili, S.M.R., Jafari, A.A. and Davar, A. (2009) Analysis and optimization of laminated composite circular cylindrical shell subjected to compressive axial and transverse transient dynamic loads. Thin-Walled Structures, 47(8-9), pp. 970-983. ISSN (print) 0263-8231

B

Balbis, Luisella, Ordys, Andrzej W., Grimble, Michael J. and Pang, Yan (2007) Tutorial introduction to the modelling and control of hybrid systems. International Journal of Modelling, Identification and Control (IJMIC), 2(4), pp. 259-272. ISSN (print) 1746-6172

Bao, Y., Zhang, T. and Gawne, D.T. (1998) Analysis of residual stress generated during plasma spraying of glass coatings. In: 15th International Thermal Spray Conference; 25-29 May 1998, Nice, France. (Proceedings of the 15th International Thermal Spray Conference)

Bao, Y., Zhang, T. and Gawne, D.T. (2005) Influence of composition and process parameters on the thermal spray deposition of UHMWPE coatings. Journal of Materials Science, 40(1), pp. 77-85. ISSN (print) 0022-2461

Bao, Y., Gawne, D.T., Zhang, T., Qiu, Z. and Zhang, K. (2000) Influence of secondary phase on residual stress of plasma sprayed glass coating. Surface Engineering, 16(6), pp. 473-479. ISSN (print) 0267-0844

Bao, Y., Zhang, T., Gawne, D.T. and Mason, P. (2009) Quantitative model for the viscous flow and composition of two-phase silicon nitride-based particles in plasma-spray deposition. Journal of the European Ceramic Society, 29(8), pp. 1521-1528. ISSN (print) 0955-2219

Bao, Y., Zhang, T. and Gawne, D.T. (1998) The mechanism of crack formation in plasma sprayed enamel. Transactions of the Institute of Metal Finishing, 76(6), pp. 213-216. ISSN (print) 0020-2967

Barnes, S., Flower, Ray, Self, A., Mason, P.J. and Newman, T. (2002) Foundation Degree in Aircraft Engineering - a new degree for a new age. Engineering Education 2002: Professional Engineering Scenarios, 1(7336702), 7/1- 7/5.

Bell, M, Cooper, R., Houston, G. and Wang, J (2010) Numerical modelling of acoustic sources. In: RAeS Aerodynamics Conference Applied Aerodynamics: Capabilities and Future Requirements; 27-28 Jul 2010, Bristol, U.K..

Bengherbia, T. and Bauer, P. (2009) Numerical investigation of thermally choked ram accelerator in sub-detonative regime. In: 47th AIAA Aerospace Sciences Meeting and The New Horizons Forum and Aerospace Exhibit 2009; 5-8 Jan 2009, Orlando, Florida.

Bengherbia, T., Yao, Y. F., Bauer, P. and Knowlen, C. (2011) Numerical study of gaseous reactive flow over a ram accelerator projectile in subdetonative velocity regime. European Physical Journal - Applied Physics (The), 55(1), 11102 -11113. ISSN (print) 1286-0042

Bengherbia, T., Bauer, P., Yao, Y. and Knowlen, C. (2010) One-dimensional performance modelling of the ram accelerator in subdetonative regime. Journal of Aerospace Science, Technologies and Systems, 88(1), pp. 3-13.

Bengherbia, T., Yao, Y., Bauer, P. and Knowlen, C. (2010) Thrust prediction in thermally choked ram accelerator. In: AIAA 48th Aerospace Sciences Meeting; 04-07 Jan 2010, Orlando, FL, USA.

Bengherbia, Tarek, Yao, Yufeng, Bauer, Pascal and Knowlen, Carl (2010) Equations of state for 1-D modelling of ram accelerator thrust in thermally choked propulsion mode. International Journal of Engineering Systems Modelling and Simulations, 2(3), pp. 154-161. ISSN (print) 1755-9758

Bengherbia, Tarek, Yao, Yufeng, Bauer, Pascal, Giraud, Marc and Knowlen, Carl (2011) Improved one-dimensional unsteady modelling of thermally choked ram accelerator in sub-detonative velocity regime. Journal Of Applied Mechanics, 78(5), 051004. ISSN (print) 0021-8936

Benhadj, R and Ouazzane, A.K. (2002) Flow conditioners design and their effects in reducing flow metering errors. Sensor Review, 22(3), pp. 223-231. ISSN (print) 0260-2288

Benhadj, R and Ouazzane, A.K. (2002) Laser probe design for carbon content in ash measurement. Sensor Review, 22(4), pp. 341-347. ISSN (online) 0260-2288

Benhadj, R and Ouazzane, K (2006) System automation for measuring coal combustion efficiency. Journal Of Power And Energy - Part A, 220(1), pp. 15-23. ISSN (print) 0957-6509

Benhadj, R. and Dawson, B. (1995) Air jets imaging tactile sensing device for automation applications. Robotica, 13(5), pp. 521-529. ISSN (print) 0263-5747

Benhadj, R., Marir, F. and Roome, L. (2000) Performance tests characteristic of a pneumatic proximity tactile array sensing device. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of engineering manufacture, 214(10), pp. 901-914. ISSN (print) 0954-4054

Benhadj, R. and Roome, R.L. (2000) Pneumatic proximity-to-tactile imaging device. Sensor Review, 20(1), pp. 36-42. ISSN (print) 0206-2288

Benhadj-Djilali, R., Rahnajet, H. and Safa, M. (1987) High resolution pneumatic proximity tactile sensing device. The International Journal of Advanced Manufacturing Technology, 2(3), pp. 59-72. ISSN (print) 0268-3768

Benhadj-Djilali, R., Dawson, B. and Safa, M.M.A. (1993) Imaging pneumatic proximity to tactile sensing device. Sensor Review, International Journal of Sensing for Industry, 13(3), pp. 23-28. ISSN (print) 0260-2288

Benhadj-Djilali, R., Dawson, B. and Sadeque, S. (1993) Tactile binary image recognition algorithm using geometrical moment invariants. Sensor Review, International Journal of Sensing for Industry, 13(4), pp. 13-18. ISSN (print) 0260-2288

Benhadj-Djilali, R., Sadeque, S. and Rahnajet, H. (1988) A knowledge based system for sensor interaction for real-time component control. The International Journal of Advanced Manufacturing Technology, 3(1), pp. 77-102. ISSN (print) 0268-3768

Benhadj-Djilali, R. and Dawson, B. (1995) A pneumatic tactile sensing device for automation application. Robotica, 13(5), pp. 521-529. ISSN (print) 0263-5747

Benhadj-Djilali, Redha (1992) Development of a high resolution pneumatic proximity to tactile sensing device for parts identification. (PhD thesis), Kingston University.

Blackman, B.R.K., Hadavinia, H., Kinloch, A.J. and Williams, J.G. (2003) The use of a cohesive zone model to study the fracture of fibre composites and adhesively-bonded joints. International Journal of Fracture, 119(1), pp. 25-46. ISSN (print) 0376-9429

Boyle, Mark, Gault, Richard, Cooper, Richard and Wang, Jian (2008) Modelling correlated and uncorrelated sound sources. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Boyle, Mark, Cassidy, Matthew, Cooper, Richard, Gault, Richard and Wang, Jian (2007) An investigation into the relationship between sound intensity and normal surface velocity. Journal of the Acoustical Society of America, 121(5), p. 3155. ISSN (print) 0001-4966

Bradsell, Colin (2011) Gravimetric determination of diffusion coefficients and volumetric properties of polyethylene closed cell foams. (MSc(R) thesis), Kingston University.

Brandon, P., Patel, A., Karwatzki, J. and Ordys, A. (2007) Adaptive Damper Modelling and Experimentation. In: 3rd Institution of Engineering and Technology Conference on Automotive Electronics; 28-29 June 2007, Warwick, U.K.. ISBN 9780863418150

Bright, Norman (2006) Behaviour of low density autoclaved aerated concrete masonry under concentrated loads. (PhD thesis), Kingston University.

Bromhead, E., Fourlas, G. and Zemichael, A.A. (2001) Applications of 3D slope stability analysis. In: 14th Southeast Asian Geotechnical Conference; 10 - 14 Dec 2001, Hong Kong.

Bromhead, E. N. (1984) An analytical solution to the problem of seepage into counterfort drains. Canadian Geotechnical Journal (CGJ), 21(4), pp. 657-662. ISSN (print) 1208-6010

Bromhead, E.N. and Ibsen, M.-L. (2004) Bedding-controlled coastal landslides in Southeast Britain between Axmouth and the Thames Estuary. Landslides, 1(2), pp. 131-141. ISSN (print) 1612-510X

Bromhead, E.N., Coppola, L. and Rendell, HM (1994) Geotechnical background to problems of conservation of the medieval centre of Tricarico, southern Italy. Quarterly Journal of Engineering Geology & Hydrogeology, 27(4), pp. 293-307. ISSN (print) 1470-9236

Bromhead, E.N., Harris, A.J. and Watson, P.D.J. (1999) Influence of pore water pressures in partly submerged slopes on the critical pool level. In: International Symposium on Slope Stability Engineering (IS-SHIKOKU 99); 8-11 Nov 1999, Matsuyama, Japan.

Bromhead, E.N., Ibsen, M-L., Papanastassiou, X. and Zemichael, A.A. (2002) Three-dimensional stability analysis of a coastal landslide at Hanover Point, Isle of Wight. Quarterly Journal of Engineering Geology and Hydrogeology, 35(1), pp. 79-88. ISSN (print) 1470-9236

Bromhead, E.N. and Patel, M.K. (1998) Triaxial testing in uncemented sandstone. In: 2nd International Symposium on Hard Soils - Soft Rocks; 12-15 Oct 1998, Naples, Italy.

Bromhead, E.N. (1997) The treatment of landslides. Proceedings of the ICE - Geotechnical Engineering, 125(2), pp. 85-96. ISSN (print) 1353-2618

Bromhead, EN (1996) Interpretation of constant head in-situ permeability tests in soil zones of finite extent. Geotechnique, 46(1), pp. 133-143. ISSN (print) 0016-8505

Bromhead, EN, Hopper, AC and Ibsen, ML (1998) Landslides in the lower greensand escarpment of South Kent. Bulletin of Engineering Geology and the Environment, 57(2), pp. 131-144. ISSN (print) 1435-9529

Bromhead, EN (2000) Panel report: Lessons from the Selborne slope stability experiment. In: 2nd International Symposium on Hard Soils - Soft Rocks; 12/10/1998-14/10/1998, NAPLES, ITALY.

Bromhead, EN (1997) The treatment of landslides. Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, 125(2), pp. 85-96. ISSN (print) 1353-2618

Bromhead, Edward and Ibsen, Maia-Laura (2007) Folkestone Warren landslides and the impact of the past rainfall record. In: International Conference on Landslides and Climate Change; 21-24 May 2007, Ventnor, U.K..

Bromhead, Edward and Ibsen, Maia-Laura (1997) Land-use and climate-change impacts on landslide hazards in SE Britain. In: International Workshop on Landslide Risk Assessment; 19-21 Feb 1997, Honolulu, U.S.. ISBN 9789054109143

Bromhead, Edward, Harris, Andrew and Ibsen, Maia-Laura (1999) Statistical variability of ring shear test results on a shear zone in London Clay. In: International Symposium on Slope Stability Engineering (IS-SHIKOKU 99); 8-11 Nov 1999, Matsuyama, Japan.

Bullen, P.R., Cheeseman, D.J., Hussain, L.A. and Ruffell, A.E. (1987) The determination of pipe contraction pressure loss coefficients for incompressible turbulent-flow. International Journal of Heat and Fluid Flow, 8(2), pp. 111-118. ISSN (print) 0142-727X

Burrows, C. R., Sahinkaya, M. N. and Clements, S. (1989) Active vibration control of flexible rotors: an experimental and theoretical study. Proceedings A. Mathematical, Physical and Engineering Sciences, 422(1862), pp. 123-146. ISSN (print) 1364-5021

Burrows, C. R., Sahinkaya, M. N. and Clements, S. (1988) Electromagnetic control of oil-film supported rotors using sparse measurements. Journal of Vibration, Acoustics, Stress and Reliability in Design, 110(3), pp. 295-299. ISSN (print) 0739-3717

Burrows, C. R., Sahinkaya, M. N., Kucuk, N. C. and Tong, M. L. (1988) In situ estimation of the dynamic characteristics of an uncavitated squeeze-film damper. Journal Of Tribology, 110(1), pp. 162-166. ISSN (print) 0742-4787

Burrows, C. R., Kucuk, N. C., Sahinkaya, M. N. and Stanway, R. (1990) Linearized squeeze-film dynamics: model structure and the interpretation of experimentally derived parameters. Journal Of Mechanical Engineering Science - Part C, 204(4), pp. 263-272. ISSN (print) 0954-4062

Burrows, C. R. and Sahinkaya, M. N. (1982) Parameter estimation of multi-mode rotor-bearing systems. Proceedings A. Mathematical, Physical and Engineering Sciences, 379(1777), pp. 367-387. ISSN (print) 1364-5021

Burrows, C. R., Sahinkaya, M. N. and Kucuk, N. C. (1987) A new model to predict the behaviour of cavitated squeeze-film bearings. Proceedings A. Mathematical, Physical and Engineering Sciences, 411(1841), pp. 445-466. ISSN (print) 1364-5021

Burrows, C.R., Sahinkaya, M.N. and Turkay, O.S. (1984) An adaptive squeeze-film bearing. Journal Of Tribology, 106(1), pp. 145-151. ISSN (print) 0742-4787

Bwalya, A.C., Sabir, H.M. and Raine, M. (2001) Induced annular water film evaporator for air to refrigerant heat exchange enhancement in a Lithium Bromide - Water absorption refrigeration system. In: 2nd International Heat Powered Cycles Conference; 5 - 7 Sept 2001, Paris, France.

C

Cade, Iain S., Keogh, Patrick S. and Sahinkaya, M. Necip (2006) Transient rotor/active magnetic bearing control using sampled wavelet coefficients. Journal Of Engineering For Gas Turbines And Power, 129(2), pp. 549-555. ISSN (print) 0742-4795

Cade, Iain S., Keogh, Patrick S., Sahinkaya, M. Necip and Burrows, Clifford R. (2007) Wavelet coefficient characteristics during rotor/auxiliary bearing contact in active magnetic bearing systems. In: UNSPECIFIED, (ed.) ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. New York, U.S.A. : American Society of Mechanical Engineers. pp. 1327-1334. ISBN 0791848027

Cade, Lain S., Sahinkaya, M. Necip, Burrows, Clifford R. and Keogh, Patrick S. (2010) Destabilization of forward rub in rotor magnetic bearing systems using actively controlled auxiliary bearings. In: UNSPECIFIED, (ed.) ASME Turbo Expo 2010: Power for Land, Sea, and Air. New York, U.S.A. : American Society of Mechanical Engineers. pp. 273-282. ISBN 9780791844014

Campelo, Hugh M, Muppala, Siva P.R., Wen, Jennifer X. and Manicham, B (2010) Numerical investigation of laminar burning velocities for various premixed gaseous hydrogen/hydrocarbon/air mixtures. In: The 5th European Conference on Computational Fluid Dynamics; 14 - 17 June 2010, Lisbon, Portugal.

Cassidy, Matthew, Gault, Richard, Cooper, Richard and Wang, Jian (2008) Design for sound transmission loss through an enclosure of a generator set. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Cassidy, Matthew, Cooper, Richard, Gault, Richard and Wang, Jian (2008) Evaluation of standards for transmission loss tests. Journal of the Acoustical Society of America, 123(5), p. 3190. ISSN (print) 0001-4966

Castagna, Jony and Yao, Yufeng (2007) DNS of turbulent flow over longitudinally ridged walls. In: 60th Annual Meeting of the Divison of Fluid Dynamics; 18-20 Nov 2007, Salt Lake City, Utah, U.S.A..

Castagna, Jony and Yao, Yufeng (2010) Development of a multi-block high-order DNS code for turbulent flow simulations. IOP Conference Series: Materials Science and Engineering, 10(012027), ISSN (print) 1757-8981

Castagna, Jony and Yao, Yufeng (2010) Development of a multi-block high-order DNS code for turbulent flow simulations. In: 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics; 19-23 Jul 2009, Sydney, Australia. (Unpublished)

Castagna, Jony (2010) Direct numerical simulation of turbulent flows over complex geometries. (PhD thesis), Kingston University.

Cazan, A, Gohar, R and Safa, M M A (2002) Externally pressurised gas bearings in a mixed configuration. Proceeding of the Institute of Mechanical Engineering, Part K, Journal of Multibody Dynamics, 216(2), pp. 181-189. ISSN (print) 1464-4193

Cazan, A., Safa, M. and Gohar, R. (2000) High-stability externally pressurized gas bearing. In: 16th National Conference on Manufacturing Research; 5-7 Sept 2000, London, UK. (Advances in Manufacturing Technology, no. 14) ISBN 9781860582677

Chan, K Y, Ordys, A. and Duran, O (2010) A system to measure gap distance between two vehicles using license plate character height. In: Bolc, Leonard , Tadeusiewicz, Ryszard , Chmielewski, Leszek J. and Wojciechowski, Konrad, (eds.) Computer Vision and Graphics: International Conference, ICCVG 2010 Warsaw, Poland, September 2010 Proceedings, Part 1. Berlin, Germany : Springer. pp. 249-256. (Lecture Notes in Computer Science, no. 6374) ISSN (print) 0302-9743 ISBN 9783642159091

Chan, KinYip, Ordys, Andrzej and Hersi, Adnan (2009) Driver assistance system based on single camera. In: Set for Britain; 09 Mar 2009, London, U.K..

Chang, N., Yang, W., Wang, J. and Wang, W. (2010) Design optimization of composite wing box for flutter and stiffness. In: 48th AIAA Aerospace Sciences Meeting, Including the New Horizons Forum and Aerospace Exposition; 4 - 7 Jan 2010, Orlando, Florida, U.S.. (Unpublished)

Chang, N., Wang, W., Yang, W. and Wang, J. (2010) Ply stacking sequence optimization of composite laminate by permutation discrete particle swarm optimization. Structural and Multidisciplinary Optimization, 41(2), pp. 179-187. ISSN (print) 1615-147X

Chau, M., Hoffmann, Joerg, Blundell, M.V., Ordys, A. and Hadavinia, H. (2010) Effect of side-wall reinforcement on energy absorption of thin-wall cylindrical damper. Key Engineering Materials, 417-18, pp. 785-788. ISSN (print) 1013-9826

Chau, M., Hoffmann, J., Blundell, M.V., Ordys, A. and Hadavinia, H. (2009) Effect of side-wall reinforcement on energy absorption of thin-wall cylindrical damper. In: 8th International Conference on Fracture and Damage Mechanics; 8-10 Sep 2009, Malta. (Key Engineering Materials, no. 417-418)

Chen, J., Wang, J. and Cassidy, M. (2009) Experiment study and design of moveable partition wall. In: 3rd International Conference on Integrity, Reliability and Failure; 20-24 Jul 2009, Porto, Portugal. (Unpublished)

Chen, Jian, Li, Yan and Wang, Jian (2008) Simultaneous optimization of fuel consumption and emissions for a parallel hybrid electric SUV using fuzzy logic control. International Journal of Vehicle Design, 46(2), pp. 204-218. ISSN (print) 0143-3369

Chen, Jian, Wang, Jian and Muckian, Gerard (2008) Sound transmission loss of movable double-leaf partition wall. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Chen, Z.B., Dembele, Siaka, Wen, Jennifer and Tam, V.H.Y. (2009) Towards large eddy simulation of LNG pool fires. In: Hazards XXI: Process Safety and Environmental Protection in a Changing World; 10-12 Nov 2009, Manchester, U.K.. ISBN 9780852955369

Chen, Zezhi and Wallace, Andrew M. (2007) Improved Object Tracking Using an Adaptive Colour Model. In: Yuille, Alan L. , Song-Chun, Zhu , Cremers, Daniel and Wang, Yongtian, (eds.) Energy Minimization Methods in Computer Vision and Pattern Recognition. Springer Berlin Heidelberg. pp. 280-294. (Lecture Notes in Computer Science, no. 4679) ISBN 9783540741954

Chhaniyara, S., Bunnun, P., Zweiri, Y.H., Seneviratne, L.D. and Althoefer, K. (2006) Feasibility of velocity estimation for all terrian ground vehicles using an optical flow algorithm. In: 3rd International Conference on Autonomous Robots and Agents; 12-14 Dec 2006, Palmerston North, New Zealand.

Chhaniyara, Savan Bhagvanji [Inventor], Zweiri, Yahya Hashem [Inventor], Althoefer, Kaspar Alexander [Inventor] and Seneviratne, Lakmal Dasarath [Inventor] (2006) Kings College London Vehicle Location. WO2006/087542.

Clarke, Karen (2005) Residual shear strength with special reference to rate effects. (PhD thesis), Kingston University.

Cockell, C.S. and Ellery, A.A. (2003) The human exploration of the Martian pole part 1 - Four phases from early expedition to a permanent station. Journal of the British Interplanetary Society, 56(1-2), pp. 33-42. ISSN (print) 0007-084X

Cole, M. O. T., Keogh, P. S., Burrows, C. R. and Sahinkaya, M. Necip (2006) Wavelet domain control of rotor vibration. Journal Of Mechanical Engineering Science - Part C, 220(2), pp. 167-184. ISSN (print) 0954-4062

Cooper, M.R., Bromhead, E.N., Petley, D.J. and Grant, D.I. (1998) The Selborne cutting stability experiment. Geotechnique, 48(1), pp. 83-101. ISSN (print) 0016-8505

Coppola, L, Nardone, R, Rescio, P and Bromhead, E (2009) The ruined town of Campomaggiore Vecchio, Basilicata, Italy. Quarterly Journal of Engineering Geology and Hydrogeology, 42(3), pp. 383-387. ISSN (print) 1470-9236

Cottam, G., O'Reilly, M. and Ryan, E. (2002) Statutory construction adjudication: four years on. Proceedings of the ICE - Civil Engineering, 150(2), pp. 75-80. ISSN (print) 0965-089X

Cotterell, B., Hbaieb, K., Williams, J.G., Hadavinia, H. and Tropsa, V. (2006) The root rotation in double cantilever beam and peel tests. Mechanics of Materials, 38(7), pp. 571-584. ISSN (print) 0167-6636

Curley, AJ, Hadavinia, H, Kinloch, AJ and Taylor, AC (2000) Predicting the service-life of adhesively-bonded joints. International Journal of Fracture, 103(1), pp. 41-69. ISSN (print) 0376-9429

Curley, AJ, Williams, KJ, Le, T and Patel, H (1999) The cyclic fatigue behaviour of ball grid arrays. Microelectronics International, 16(3), pp. 43-45. ISSN (online) 1356-5362

Curley, AJ, Jethwa, JK, Kinloch, AJ and Taylor, AC (1998) The fatigue and durability behaviour of automotive adhesives part III: predicting the service life. Journal of Adhesion, 66(1-4), pp. 39-59. ISSN (print) 0021-8464

Curran, R., Gilmour, M., McAlleenan, C., Price, M., Kelly, P. and Wang, J. (2007) Development of a cost management system for evolving product definition. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

D

Dare, Adedayo A. (2008) Suitability of using novel cementitious materials for concrete constructions. (MSc(R) thesis), Kingston University.

David-West, O. S., Wang, J. and Cooper, R. (2010) Finite element model updating of a thin wall enclosure under impact excitation. Applied Mechanics and Materials, 24-25, pp. 337-342. ISSN (print) 1660-9336

David-West, O. S., Wang, J and Cooper, R. (2010) Finite element model updating of a thin wall enclosure under impact excitation. In: 7th BSSM International Conference on Advances in Experimental Mechanics,; 07 - 09 September 2010, Liverpool, U.K..

David-West, O. S., Wang, J and Cooper, R. (2011) Model updating of an enclosure using imaginary elements. In: EMex 2011, the BSSM’s annual Exhibition of Experimental Mechanics; 7-9 September 2011, Edinburgh, UK.. (Submitted)

David-West, O. S., Wang, J., Gault, R. and Cooper, R. (2009) Numerical and experimental based comparison of the dynamic properties of enclosures with and without hole. In: The Sixteenth International Congress on Sound and Vibration; 5-9 July 2009, Krakow, Poland. (Unpublished)

David-West, O. S., Banks, W. M. and Pethrick, R. A. (2011) A study of the effect of strain rate and temperature on the characteristics of quasi-unidirectional natural fibre-reinforced composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 225(L3), pp. 133-148. ISSN (print) 1464-4207

Davies, M., Zoras, S. and Adjali, M.H. (2000) Development and inter-model comparative testing of a novel earth-contact heat-transfer simulation method. Building Services Engineering Research and Technology, 21(1), pp. 19-25. ISSN (print) 0143-6244

Davies, M., Zoras, S. and Adjali, M.H. (2001) Improving the efficiency of the numerical modelling of built environment earth-contact heat transfers. Applied Energy, 68(1), pp. 31-42. ISSN (online) 0306-2619

Davies, Michael, Zoras, Stamatis and Adjali, Hicham (1999) A potentially fast, flexible, and accurate earth-contact heat-transfer simulation method. In: Building Simulation; 13 - 15 Sept 1999, Kyoto, Japan.

Delpak, R, Omer, J. R. and Robinson, R. B. (2000) Load-settlement prediction for large diameter bored piles in Mercia mudstone. Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, 143(4), pp. 201-224. ISSN (print) 1353-2618

Dembele, S, Wen, JX and Sacadura, JF (2000) Analysis of the two-flux model for predicting water spray transmittance in fire protection application. Journal Of Heat Transfer, 122(1), pp. 183-186. ISSN (print) 0022-1481

Dembele, S and Wen, J.X. (2000) Investigation of a spectral formulation for radiative heat transfer in one-dimensional fires and combustion systems. International Journal of Heat and Mass Transfer, 43(21), pp. 4019-4030. ISSN (print) 0017-9310

Dembele, S, Delmas, A and Sacadura, JF (1996) Shielding fire thermal radiation by water spray curtains: some improvements in radiative transfer modelling. In: Industrial Fires III Proceedings; 17-18 Sep 1996, Roskilde, Denmark. (EUR 17477) ISBN 8755022871

Dembele, S., Lima, K. L. M. and Wen, J. X. (2011) Assessment of an unstructured exponential scheme discrete ordinates radiation model for non-gray media. Heat and Mass Transfer, 47(11), pp. 1349-1362. ISSN (print) 0947-7411

Dembele, S. and Wen, J.X. (2000) Predicting the mass burning rates of liquid pool fires using CFD techniques. International Symposium on Combustion, Abstracts of Accepted Papers, B, p. 67. ISSN (print) 1540-7489

Dembele, S., Rosario, R.A.F., Wang, Q.S., Warren, P.D. and Wen, J.X. (2010) Thermal and stress analysis of glazing in fires and glass fracture modeling with a probabilistic approach. Numerical Heat Transfer Part B, 58(6), pp. 419-439. ISSN (print) 1040-7790

Dembele, S., Rosario, R., Wen, J.X., Williams, I. and Warren, P. D. (2010) Thermal and stress analysis of glazing systems under fire conditions. In: 12th International Fire Science & Engineering Conference (INTERFLAM 2010); 5-7 Jul 2010, Nottingham, U.K..

Dembele, Siaka and Wen, Jennifer (2003) Predicting Glazing Behaviour in a Fire Environment – Effect of Radiation Heat Transfer Models. FABIG Newsletter(45), R570.

Dembele, Siaka, Rosario, Ricardo, Wen, Jennifer, Warren, Paul and Dale, Stuart (2008) Simulation of glazing behavior in fires using computational fluids dynamics and spectral radiation modeling. In: 9th International IAFSS Symposium; 21-26 Sept 2008, Karlsruhe, Germany.

Dhir, R.K., McCarthy, M.J., Limbachiya, M.C., El Sayad, I. and Zhang, D.S. (1999) Pulverized fuel ash concrete: air-entrainment and freeze/thaw durability. Magazine of Concrete Research, 51(1), pp. 53-64. ISSN (print) 0024-9831

Dhir, R.K., Limbachiya, M.C. and Beggs, A. (2001) Resolving application issues with the use of recycled concrete aggregate. (Technical Report) Dundee : University of Dundee.

Dhir, R.K., Limbachiya, M.C. and Leelawat, T. (1999) Suitability of recycled concrete aggregate for use in BS5328 designated mixes. Proceedings of the Institution of Civil Engineers - Structures and buildings, 134(3), pp. 257-274. ISSN (print) 0965-0911

Dhir, Ravindra K, Limbachiya, Mukesh C and Dyer, Thomas D (2001) Recycling and reuse of glass cullet. London : Thomas Telford. ISBN 9780727729941

Dhir, Ravindra K and Limbachiya, Mukesh C (1999) Utilizing ready-mixed concrete and mortar. London : Thomas Telford. ISBN 9780727728234

Dhir, Ravindra K., Limbachiya, Mukesh C. and Newlands, Moray D. (2001) Recovery and recycling of paper. London : Thomas Telford. ISBN 9780727729934

Dhir, Ravindra K., Limbachiya, Mukesh C. and McCarthy, Michael J. (2001) Recycling and reuse of sewage sludge. London : Thomas Telford. ISBN 9780727729927

Dhir, Ravindra K., Limbachiya, Mukesh C. and Paine, Kevin A. (2001) Recycling and reuse of used tyres. London : Thomas Telford. ISBN 9780727729958

Dhir, Ravindra K., Henderson, Neil A. and Limbachiya, Mukesh C. (1998) Sustainable Construction: Use of recycled concrete aggregate. London : Thomas Telford. ISBN 9780727727268

Dingle, Lloyd and Tooley, Mike (2005) Aircraft engineering principles. Oxford, UK : Elsevier Butterworth Heinemann. 646p. ISBN 075065015X

Dinkelacker, Friedrich, Manickam, B, Aluri, N.K., Muppala, S.P.R. and Wen, J.X. (2008) Modelling and simulation of lean premixed turbulent Methane/Hydrogen/Air Flames for two flow configurations. In: CHT-08 ICHMT International Symposium on Advances in Computational Heat Transfer; 11-16 May 2008, Marrakesh, Morocco.

Dixon, N and Bromhead, EN (1999) Depth-dependent permeability in London Clay measured using standpipe piezometer equilibration data. Geotechnique, 49(5), pp. 651-660. ISSN (print) 0016-8505

Dixon, N. and Bromhead, E.N. (2002) Landsliding in London Clay coastal cliffs. Quarterly Journal of Engineering Geology and Hydrogeology, 35(4), pp. 327-343. ISSN (print) 1470-9236

Dogan, Faith, Hadavinia, Homayoun, Barton, Stephen J and Mason, Peter J. (2010) Applications of intrinsically conducting polymers. Recent Patents on Mechanical Engineering, 3(3), pp. 174-182. ISSN (print) 2212-7976

Donchev, T., Thomopoulos, G. and Bradsell, C. (2008) Application of FRP materials for retrofitting of RC beams after shear failure. In: Fourth International Conference on FRP Composites in Civil Engineering (CICE 2008); 22 - 24 Jul 2008, Zurich, Switzerland. ISBN 9783905594508 (Unpublished)

Donchev, T., Wen, J., Etebar, K. and Hadavinia, H. (2007) Determination of mode II fracture toughness in delamination of angle-ply composite beams. In: World Congress on Engineering 2007; 2-4 July 2007, London, U.K.. (Unpublished)

Donchev, T. and Djelebov, E. (2008) Standard developments of vehicle collision loading on bridge piers. In: UNSPECIFIED, (ed.) Information and Communication Technology (ICT) for Bridges, Buildings and Construction Practice. Zurich, Switzerland : IABSE. (IABSE Reports, no. 94) ISBN 9783857481178

Donchev, T.D., Abouamer, S. and Wertheim, D. (2009) Microscopic analysis of the connection between CFRP laminates and concrete at elevated temperatures. In: Grantham, Michael , Salomoni, Valentina and Majorana, Carmelo, (eds.) Concrete Solutions. London : CRC Press. pp. 57-62. ISBN 9780415550826

Donchev, Ted (2009) Experimental study of the behaviour of various non-bolted anchorages for CFRP laminates. In: 9th International symposium on fiber reinforced polymer reinforcement for concrete structures; 13-15 July 2009, Sydney, Australia.

Donchev, Ted and Nabi, Parviz (2010) Non-bolted anchorage systems for CFRP laminates applied for strengthening of RC slabs. In: 5th International Conference on Composites in Civil Engineering; 27-29 Sept 2010, Beijing, China.

Donchev, Ted and Djelebov, Evgueniy (2008) Standard developments of vehicle collision loading on bridge peirs. In: IABSE conference on Information and Communication Technology (ICT) for Bridges, Buildings and Construction Practice; 04 - 06 Jun 2008, Helsinki, Finland. ISBN 9783857481178

Donchev, Ted. and Wen, J. (2007) Effect of elevated temperatures on CFRP strengthened structural elements. In: Fire and Materials; 29 31 Jan 2007, San Francisco, California, U.S.A..

Drummond-Thompson, Phillip [Compiler] (2006) The business environment. Harlow, U.K. : Pearson Education Limited. 726p. ISBN 9781844796175

Duran, O, Althoefer, K and Seneviratne, L.D. (2007) Automated pipe defect detection and categorization using camera/laser-based profiler and artificial neural network. IEEE Transactions on Automation, Science and Engineering, 4(1), pp. 118-126. ISSN (print) 1545-5955

Duran, O, Althoefer, K and Seneviratne, L (2004) Automated pipe inspection using ANN and laser data fusion. In: IEEE International conference on robotics and automation; 24 - 27 April 2004, New Orleans, USA. (IEE International Conference on Robotics and Automation 2004; Proceedings ICRA, no. 5) ISSN (print) 1050-4729

Duran, O, Althoefer, K and Seneviratne, L (2002) Automated sewer pipe inspection through image processing. In: IEEE International Conference on Robotics and Automation (ICRA02); 11-15 May 2002, Washington D.C., USA. (International Conference on Robots and Automation, 2002. Proceedings ICRA '02, no. 3)

Duran, O, Althoefer, K and Seneviratne, L (2003) Experiments using a laser-based transducer and automated analysis techniques for pipe inspection. In: IEEE International Conference on Robotics and Automation (ICRA03); 14 - 19 Sept 2003, Tapei, Taiwan. (International Conference on Robotics and Automation 2003; Proceedings ICRA '03, no. 2) ISSN (print) 1050-4729

Duran, O, Althoefer, K and Seneviratne, L (2004) Laser profiler model for robot-based pipe inspection. In: World Automation Congress (WAC'04), Tenth International Symposium on Robotics and Applications (ISORA-101); 28 June - 1 July 2004, Seville, Spain. (Robotics and Applications; WAC 2004; ISORA 2004; TSI Press Series, no. 15) ISBN 9781889335216

Duran, O, Althoefer, K and Seneviratne, L.D. (2002) Pipe inspection using intelligent analysis techniques with high noise-tolerance. In: IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS02); 30 Sept - 5 Oct 2002, Lausanne, Switzerland. (IEEE/RSJ International Conference on Intelligent Robots and Systems, no. 2)

Duran, O and Petrou, M (2006) Statistical assessment for real-time background class identification in hyperspectral images. In: IEEE International Geoscience and Remote Sensing Symposium (IGARSS06); 31 July - 4 August 2006, Denver, USA. (IEEE International Symposium on Geoscience and Remote Sensing (IGARSS))

Duran, O, Althoefer, K and Seneviratne, L (2003) A sensor for pipe inspection: model, analysis and image extraction. In: IEEE International Conference on Image Processing (ICIP03); 14-17 September 2003, Barcelona, Spain. (International Conference on Image Processing, 2003. ICIP 2003 Proceedings, no. 3)

Duran, O and Petrou, M (2005) A time-efficient clustering method for pure class selection. In: IEEE International Geoscience and Remote Sensing Symposium (IGARSS05); 25-29 July 2005, Seoul, South Korea. (IEEE International Geoscience and Remote Sensing Symposium) ISBN 0780390504

Duran, O., Onasoglou, E. and Petrou, M. (2009) Fusion of Kalman filter and anomaly detection for multispectral and hyperspectral target tracking. In: IEEE International Geoscience and Remote Sensing Symposium; 12 - 17 July 2009, Cape Town, South Africa. ISBN 9781424433940

Duran, O., Althoefer, K. and Seneviratne, L.D. (2003) Pipe inspection using a laser-based transducer and automated analysis techniques. IEEE/ASME Transactions on Mechatronics, 8(3), 401 -409. ISSN (print) 1083-4435

Duran, O. and Petrou, M. (2009) Robust endmember extraction in the presence of anomalies. In: IEEE International Geoscience and Remote Sensing Symposium; 12 - 17 July 2009, Cape Town, South Africa. ISBN 9781424433940

Duran, O. and Petrou, M. (2009) Spectral unmixing with negative and superunity abundances for subpixel anomaly detection. IEEE Geoscience and Remote Sensing Letters, 6(1), 152 -156. ISSN (print) 1558-0571

Duran, O., Althoefer, K. and Seneviratne, L.D. (2002) State of the art in sensor technologies for sewer inspection. IEEE Sensors Journal, 2(2), pp. 73-81. ISSN (print) 1530-437X

Duran, O. and Petrou, M. (2007) A time-efficient method for anomaly detection in hyperspectral images. IEEE Transactions on Geoscience and Remote Sensing, 45(12), pp. 3894-3904. ISSN (print) 0196-2892

Duran, Olga, Petrou, Maria, Hathaway, David and Nothard, Joanne (2006) Anomaly detection through adaptive background class extraction from dynamic hyperspectral data. In: Signal Processing Symposium, NORSIG 2006; 7-9 June 2006, Rejkjavik, Iceland.

Duran, Olga and Petrou, Maria (2007) Anomaly detection using spectral unmixing with negative and superunity abundance weights. In: IEEE International Geoscience and Remote Sensing Symposium (IGARSS07); 23-28 Jul 2007, Barcelona, Spain.

Duran, Olga (2004) Automated laser and pipe inspection. (PhD thesis), Kings's College, London.

Duran, Olga, Althoefer, Kaspar and Seneviratne, Lakmal D. (2002) Automated laser-based profiler for sewer inspection. In: 7th International Conference on Intelligent Autonomous Systems (IAS-7); 25-27 March 2002, Marina del Rey, California, USA.

Dykes, A P and Warburton, J (2008) Discussion of "A5 Llyn Ogwen peatslide, Capel Curig, North Wales" by D. Nichol, G.K. Doherty & M.J. Scott in Quarterly Journal of Engineering Geology and Hydrogeology, 40, 293-299. Quarterly Journal of Engineering Geology and Hydrogeology, 41(1), pp. 123-126. ISSN (print) 1470-9236

Dykes, A P (2009) Discussion of a Peat slope failure in Ireland by N. Boylan, P. Jennings & M. Long, Quarterly Journal of Engineering Geology and Hydrogeology, 41(1), 93-108. Quarterly Journal of Engineering Geology and Hydrogeology, 42(1), pp. 123-128. ISSN (print) 1470-9236

Dykes, A P (2009) Geomorphological maps of Irish peat landslides created using hand-held GPS - second edition. Journal of Maps, 2009, pp. 179-185. ISSN (online) 1744-5647

Dykes, A. (2009) Causes and implications of mass movements in peatlands. In: 7th International Conference on Geomorphology; 06-11 July 2009, Melbourne, Australia.

Dykes, A.P. (2008) Geomorphological maps of Irish peat landslides created using hand-held GPS - Second Edition. In: International Meeting on Environments Analysis and Geomorphological Mapping for a Sustainable Development; 26 Feb 2008, Addia Ababa, Ethiopia.

Dykes, A.P. (2008) Properties of peat relating to instability of blanket bogs. In: 10th International Symposium on Landslides and Engineered Slopes; 30 June - 4 July 2008, Xian, China. ISBN 9780415411967

Dykes, A.P. (2010) Rock slope instability in England's Lake district. In: International Conference - Mountain Risks: Bringing Science to Society; 24 - 26 Nov 2010, Firenze, Italy.

Dykes, Alan (2010) Overview: What is Peat? In: Seminar: Peat Stability; 7 Oct 2010, Dublin, Ireland.

Dykes, Alan P. and Selkirk-Bell, Jennifer M. (2010) Landslides in blanket peat on subantarctic islands: causes, characteristics and global significance. Geomorphology, 124(3-4), pp. 215-228. ISSN (print) 0169-555X

Dykes, Alan P. (2008) Natural and anthropogenic causes of peat instability and landslides. In: 13th International Peat Congress; 08 - 13 Jun 2008, Tullamore, Ireland. ISBN 0951489046

de Silva, R.P. (2002) The effect of length of time period considered in estimating groundwater recharge with a soil water budget model. Journal of the National Science Foundation of Sri Lanka, 30(3-4), 109 - 122. ISSN (print) 1391-4588

E

Eames, IW and Sabir, HM (1997) Potential benefits of electrohydrodynamic enhancement of two-phase heat transfer in the design of refrigeration systems. APPLIED THERMAL ENGINEERING, 17(1), pp. 79-92. ISSN (print) 1359-4311

Eames, IW, Marr, NJ and Sabir, HM (1997) The evaporation coefficient of water. International Journal of Heat and Mass Transfer, 40(12), pp. 2963-2973. ISSN (print) 0017-9310

Early, J., Wang, J., Curran, R., Price, M. and Raghunathan, S. (2007) Dynamic feedback models for whole life cost prediction. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Edelmann, C.A., Roberts, G.T., Krishnan, L., Sandham, N.D. and Yao, Y. (2007) The influence of wall temperature on shock-induced separation. In: Hannemann, Klaus and Seiler, Friedrich, (eds.) Shock Waves. Springer Berlin Heidelberg. pp. 1303-1308. ISBN 9783540851806

Elhag, Y. B. M. (2006) Investigation of boiling process in water evaporator with internal capillary structure. (PhD thesis), Kingston University.

Ellery, A., Barnes, D., Buckland, R., Welch, C., Garry, J., Zarnecki, J., Gebbie, J., Green, A., Smith, M., Hall, D., McInnes, C., Winfield, A., Nehmzow, U. and Ball, A. (2003) The UK space and planetary robotics network. Journal of the British Interplanetary Society, 56(9-10), pp. 328-337. ISSN (print) 0007-084X

Ellery, A.A. and Cockell, C.S. (2003) The human exploration of the Martian pole part 2 - Support technologies. Journal of the British Interplanetary Society, 56(1-2), pp. 43-55. ISSN (print) 0007-084X

Ellery, Alex (2003) Robotics in the service of astronomy. Astronomy & Geophysics, 44(3), pp. 23-25. ISSN (print) 1366-8781

Ellery, Alex, Ball, Andrew J, Cockell, Charles, Dickensheets, David, Edwards, Howell, Kolb, Christof, Lammer, Helmut, Patel, Manish and Richter, Lutz (2005) Vanguard: a European robotic astrobiology-focussed Mars sub-surface mission proposal. Acta Astronautica, 56(3), pp. 397-407. ISSN (print) 0094-5765

Ellery, Alex and Wynn-Williams, David (2003) Why Raman spectroscopy on Mars? : a case of the right tool for the right job. Astrobiology, 3(3), pp. 565-579. ISSN (print) 1531-1074

England, J., Hadavinia, H., Marchant, D.R. and Aboutorabi, A. (2010) Design of Automotive Metal and Composite Chassis Structures. Recent Patents on Mechanical Engineering, 3(3), pp. 211-225. ISSN (print) 2212-7976

Esfahani, M.M. Nasr, Ghasemnejad, H. and Barrington, P.E. (2010) Experimental and numerical buckling analysis of delaminated hybrid composite beam structures. Applied Mechanics and Materials, 24-25, pp. 393-400. ISSN (print) 1662-7482

Evangelou, LD, Self, A and Allen, J (2000) The F-16 departure phenomena. Aircraft Engineering and Aerospace Technology, 72(2), pp. 102-108. ISSN (print) 1748-8842

F

Fern, A., Mason-Jones, A., Pham, D. T. and Wang, J. (1999) Design and Performance Predictability of Valve Stem Seals Using FEA. (Technical Report) Warrendale, PA., U.S. : SAE International. (SAE Technical Paper 1999-01-0883)

Ferraris, S.A., Wen, J.X. and Dembele, S. (2008) Large eddy simulation of the backdraft phenomenon. Fire Safety Journal, 43(3), pp. 205-225. ISSN (print) 0379-7112

Ferraris, S.A., Madga, I and Wen, J.X. (2009) Large eddy simulation of the backdraft phenomenon and its mitigation in compartment fires with different opening geometries. Combustion Science and Technology, 181(6), pp. 853-876. ISSN (print) 0010-2202

Ferraris, Sergio Adrian (2007) Large eddy simulation of under-ventilated fires. (PhD thesis), Kingston University.

Fotiadou, Soumela (2007) Use of foamed glass gravel for sustainable concrete construction. (PhD thesis), Kingston University.

Fried, A N, Roberts, J J and Yool, A (2000) The effect of fines content in building sands on the durability of mortar. Masonry International, 14(2), pp. 51-54. ISSN (print) 0950-2289

Fried, A.N., Ahmed, A., Limbachiya, M.C. and Roberts, J.J. (2005) Mortar for low-density aircrete applications. In: 4th International Conference on Autoclaved Aerated Concrete; Sept 2005, Kingston, U.K.. ISBN 9780415383561

Fried, A.N., Roberts, J.J., Limbachiya, M.C. and Kanyeto, O. (2004) Predicting the behaviour of laterally loaded masonry panels. In: 13th International Brick/Block Masonry Conference; 4- 7 July 2004, Amsterdam, Netherlands.

Fudge, C.A. and Limbachiya, M.C. (2006) Briefing: Aircrete. Proceedings of the Institution of Civil Engineers Construction Materials, 159(2), 49 -51. ISSN (print) 1747-650X

G

Gao, J., Zhang, T., Bao, Y. and Gawne, D.T. (2010) Plasma-scan sintering of aluminosilicate sol-gel films. Journal of the European Ceramic Society, 30(4), pp. 847-855. ISSN (print) 0955-2219

Gault, R., Cooper, R., David-West, O. S., Wang, J. and Tournour, M. (2009) Near-field acoustic holography applied to a loudspeaker pseudo engine source. In: The Sixteenth International Congress on Sound and Vibration; 5-9 July 2009, Krakow, Poland. (Unpublished)

Gault, R., Cooper, R., Wang, J. and Collin, G. (2008) Using virtual engineering techniques to aid with design trade-off studies for an enclosed generator set. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Gault, R., Cooper, R., Boyle, M., Wang, J. and Tournour, M. (2009) A comparative study of near-field acoustic holography and intensity techniques applied to a loudspeaker source. In: The Sixteenth International Congress on Sound and Vibration; 5-9 July 2009, Krakow, Poland. (Unpublished)

Gault, Richard, Cooper, Richard, Wang, J and Collin, Graham (2008) Design tool methodology for simulation of enclosure cooling performance. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Gawne, D.T., Zhang, T. and Bao, Y. (2001) Abrasive wear resistance of plasma-sprayed glass-composite coatings. Journal of Thermal Spray Technology, 10(4), pp. 599-603. ISSN (print) 1059-9630

Gawne, D.T., Zhang, T. and Bao, Y. (1998) Degradation of in-flight PMMA particles during thermal spraying. In: 15th International Thermal Spray Conference; 25-29 May 1998, Nice, France. (Proceedings of the 15th International Thermal Spray Conference)

Gawne, D.T., Zhang, T. and Bao, Y. (2001) Heating effect of flame impingement on polymer coatings. In: International Thermal Spray Conference; 28-30 May 2001, Singapore, Singapore. (Proceedings of the International Thermal Spray Conference)

Gawne, D.T., Bao, Y. and Zhang, T. (2001) Plasma enamelling: a new process. The Vitreous Enameller, 52(4), p. 6. ISSN (print) 0042-7519

Georgiou, I., Hadavinia, H., Ivankovic, A., Kinloch, A.J., Tropsa, V. and Williams, J.G. (2003) Cohesive zone models and the plastically deforming peel test. Journal of Adhesion, 79(3), pp. 239-265. ISSN (print) 0021-8464

Ghasemnejad, H, Furquan, A.S.M. and Mason, P. J. (2010) Charpy impact damage behaviour of single and multi-delaminated hybrid composite beam structures. Materials & Design, 31(8), pp. 3653-3660. ISSN (print) 0264-1275

Ghasemnejad, H., Blackman, B.R.K. and Hadavinia, H. (2008) Crashworthiness of composite thin-walled GFRP and CFRP boxes. In: 5th International conference on the Fracture of Polymers, Composites and Adhesives; 07 - 11 Sep 2008, Les Diblerets, Switzerland. (Unpublished)

Ghasemnejad, H., Hadavinia, H. and Simpson, G. (2007) Crashworthiness optimization of crash box in automotive structure. Key Engineering Materials, 348-34, pp. 661-664. ISSN (print) 1013-9826

Ghasemnejad, H., Hadavinia, H. and Simpson, G.B. (2007) Crashworthiness optimization of crash box in automotive structure. In: 6th International Conference on Fracture and Damage Mechanics (FDM07); 17-19 Jul 2007, Maderia, Portugal.

Ghasemnejad, H., Hadavinia, H. and Lewis, E. (2008) Crushing behaviour of CFRP composite structure. In: 7th International Conference on fracture and damage mechanics; 09 - 11 Sep 2008, Seoul, Korea.

Ghasemnejad, H., Hadavinia, H. and Lewis, E. (2008) Crushing behaviour of CFRP composite structure. Key Engineering Materials, 385-38, pp. 85-88. ISSN (print) 1013-9826

Ghasemnejad, H., Hadavinia, H. and Aboutorabi, A. (2010) Effect of delamination failure in crashworthiness analysis of hybrid composite box structures. Materials & Design, 31(3), pp. 1105-1116. ISSN (print) 0264-1275

Ghasemnejad, H., Hadavinia, H., Marchant, D. and Aboutorabi, A. (2008) Energy absorption of thin-walled corrugated crash box in axial crushing. Structural Durability & Health Monitoring, 4(1), pp. 29-46. ISSN (print) 1930-2983

Ghasemnejad, H., Blackman, B.R.K., Hadavinia, H. and Sudall, B. (2009) Experimental studies on fracture characterisation and energy absorption of GFRP composite box structures. Composite Structures, 88(2), pp. 253-261. ISSN (print) 0263-8223

Ghasemnejad, H., Hadavinia, H. and Aboutorabi, A. (2008) Investigation of energy absorption of a GFRP composite crash box. In: Tenth International Conference on Structures Under Shock and Impact; 14 - 16 May 2008, Algarve, Portugal. (WIT Transactions on The Built Environment, no. 98) ISSN (print) 1746-4498 ISBN 9781845641078

Ghasemnejad, H., Thomas, V. and Hadavinia, H. (2011) Mixed-mode delamination failure of z-pinned hybrid laminated composites. In: 9th International Conference on Fracture and Damage Mechanics; 20-22 Sep 2010, Nagasaki, Japan. (Key Engineering Materials, no. 452-453) ISSN (print) 1013-9826

Ghasemnejad, H. and Hadavinia, H. (2010) Off-axis crashworthiness characteristic of woven glass/epoxy composite box structures. Journal of Reinforced Plastics and Composites, 29(15), pp. 2306-2330. ISSN (print) 0731-6844

Ghasemnejad, H., Hadavinia, H. and Aboutorabi, A. (2008) Study on energy absorption of GFRP composite crash box. In: Tenth International Conference on Structures Under Shock and Impact; 14 - 16 May 2008, Algarve, Portugal. (WIT Transactions on the Built Environment, no. 98) ISSN (print) 1743-3509

Ghasemnejad, H., Hadavinia, H. and ABOUTORABI, A. (2008) Study on energy absorption of GFRP composite crash box. In: Jones, N and Brebbia, C.A., (eds.) Structures Under Shock and Impact X. Ashurst, Southampton : WIT press. pp. 177-184. ISBN 9781845641078

Ghasemnejad, Hessammaddin (2009) Effects of delamination failure in crashworthiness of laminated composite box structures. (PhD thesis), Kingston University.

Giaccone, PR, Jones, GA, Minelly, S and Curley, AJ (1999) Motion-compensated multichannel noise reduction of colour film sequences. Journal of Electronic Imaging, 8(3), pp. 246-254. ISSN (online) 1017-9909

Giovanini, Leonardo, Ordys, Andrzej W. and Grimble, Michael J. (2006) Adaptive predictive control using multiple models, switching and tuning. International Journal of Control, Automation and Systems, 4(6), pp. 669-681. ISSN (print) 1598-6446

Godwin, A, Ordys, A., Francik, J., Smolenski, P, Zienowicz, K., Burley, R, Meng, Chan and Li, Ai (2009) Development of simulation system for lift design. In: International Conference on Systems Engineering; 8 - 10 Sept 2009, Coventry, U.K..

Gohar, R. and Safa, M. (2010) Fluid film lubrication. In: Rahnejat, H., (ed.) Tribology and dynamics of engine and powertrain. Cambridge, U.K. : Woodhead Publishing. pp. 132-170. ISBN 9781845693619

Gohar, R. and Safa, M. (2010) Measurement of contact pressure under elastohydrodynamic lubrication conditions. In: Rahnejat, H., (ed.) Tribology and dynamics of engine and powertrain. Cambridge, U.K. : Woodhead Publications. pp. 222-245. ISBN 9781845693619

Goraj, Z., Frydrychewicz, A., Ransom, E.C.P., Self, A. and Wagstaff, P. (2001) Aerodynamic, dynamic and conceptual design of a fire-fighting aircraft. Journal Of Aerospace Engineering - Part G, 215(3), pp. 125-146. ISSN (print) 0954-4100

Gordnian, K., Hadavinia, H., Simpson, G. and Aboutorabi, A. (2007) Calculation of energy release rate in mode I delamination of angle ply laminated composites. In: ICCES07 International Conference on Computational & Experimental Engineering and Sciences; 3-8 Jan 2007, Florida, U.S.. (International Conference on Computational and Experimental Engineering and Sciences, no. 1) ISSN (online) 1933-2815

Gordnian, K., Hadavinia, H., Mason, P.J. and Madenci, E. (2008) Determination of fracture energy and tensile cohesive strength in Mode I delamination of angle-ply laminated composites. Composite Structures, 82(4), pp. 577-586. ISSN (print) 0263-8223

Gorry, B., Chen, Z., Hammond, K., Wallace, A. and Michaelson, G. (2007) Using mean-shift tracking algorithms for real-time tracking of moving images on an autonomous vehicle testbed platform. In: Conference of the World Academy of Science Engineering and Technology; 23 - 25 Nov 2007, Venice, Italy.

Grant, R J and Smart, J (1997) A parametric study of the elastic stress distribution in pin-loaded tubes. Journal of Strain Analysis for Engineering Design, 32(3), pp. 213-228. ISSN (print) 0309-3247

Grant, RJ and Smart, J (1999) Crack growth in pin-loaded tubes: part 1: numerical analysis. The Journal of Strain Analysis for Engineering Design, 34(4), pp. 253-269. ISSN (print) 0309-3247

Grant, RJ and Smart, J (1999) Crack growth in pin-loaded tubes: part 2: comparison of experimental data with numerical results. The Journal of Strain Analysis for Engineering Design, 34(4), pp. 271-284. ISSN (print) 0309-3247

Grant, RJ and Smart, J (2000) A comparison of the SPATE stress analysis technique and finite element results for pin-loaded tubular joints. In: 9th International Scientific Conference on Achievements in Mechanical and Materials Engineering; 11-14 Oct 2000, Gdansk, Sopot, Poland. (AMME 2000) ISBN 8391445801

Grimble, M.J. and Ordys, Andrzej W. (2001) Predictive control for industrial applications. Annual Reviews in Control, 25, pp. 13-24. ISSN (print) 1367-5788

H

HAN, Tong-wei, He, Peng-fei, Wang, Jian and Wu, Ai-hui (2010) Molecular dynamics simulation of single graphene sheet under tension. New Carbon Materials, 25(4), pp. 261-266. ISSN (print) 1872-5805

Hadavinia, H., Travis, R.P. and Fenner, R.T. (2000) C1-continuous generalised parabolic blending elements in the Boundary Element Method. Mathematical and Computer Modelling, 31(8-9), 17-34.. ISSN (print) 0895-7177

Hadavinia, H. (2007) Determination of mode II fracture toughness in delamination of angle-ply composite beams. In: World Congress on Engineering 2007 (; 2-4 Jul 2007, London, UK. (Unpublished)

Hadavinia, H. and Ghasemnejad, H. (2009) Effects of Mode-I and Mode-II interlaminar fracture toughness on the energy absorption of CFRP twill/weave composite box sections. Composite Structures, 89(2), pp. 303-314. ISSN (print) 0263-8223

Hadavinia, H. and Elmarakbi, A. (2011) Special issue on structural impact and crashworthiness: part I a preface. International Journal of Vehicle Structures and Systems, 3(2), ii. ISSN (print) 0975-3060

Hadavinia, Homayoun (2008) Design aspect of composite blades for wind turbine- delamination. In: International Workshop on natural and low-cost materials in wind energy technologies; 10 - 12 Nov 2008, Dhulikel, Nepal.

Hadavinia, Homayoun, Dogan, Fatih, Elmarakbi, Ahmed and Khalili, S.M.R. (2011) Modelling of low velocity impact of laminated composite substructures. International Journal of Vehicle Structures and Systems, 3(2), pp. 96-106. ISSN (print) 0975-3060

Han, T. W., He, P. F., Wang, J. and Wu, A.H. (2009) Numerical simulation of temperature dependence of tensile mechanical properties for single graphene sheet. Journal of Tongji University (Natural Science), 37(12), ISSN (print) 0253-374X

Han, T. W., He, P. F., Wang, J., Zheng, B. L. and Wu, A. H. (2009) Strain rate dependences of tensile failure process for single graphene sheet: a molecular dynamics study. Science in China Series G: Physics, Mechanics & Astronomy, 39(9), pp. 1312-1319. ISSN (print) 1672-1780

Han, T.W., He, P.F., Wang, J. and Zheng, B.L. (2009) Molecular dynamics simulation of beta-SiC nanowire under uniaxial tension. Chinese Journal of Materials Research, 23(4), pp. 337-342. ISSN (print) 1005-3093

Haque, MN, Ransom, ECP and Self, A (1996) High performance supersonic aircraft intake design. In: 20th Congress of the International Council of the Aeronautical Sciences; 8-13 Sep 1996, Sorrento, Italy. (AIAA Conference Proceedings Series) ISBN 1563472198

Haque, MN, Ransom, ECP and Self, A (1997) High performance supersonic aircraft intake design. In: UNSPECIFIED, (ed.) 20th Congress of the International Council of the Aeronautical Sciences. Reston, VA, U.S.A. : American Institute of Aeronautics and Astronautics. pp. 1004-1014. (AIAA Conference Proceedings Series, no. ICAS 199) ISBN 1563472198

Hay, G.I., Southee, D.J., Evans, P.S.A., Harrison, D.J., Simpson, G.B. and Wood, J. (2009) A time-strain monitoring system fabricated via offset lithographic printing. Smart Materials and Structures, 18(1), 015015. ISSN (print) 0964-1726

Hedayat Nasab, A., Majrouhi Sardroud, J. and Limbachiya, M.C. (2011) Improving construction quality control and management using automated data collection technologies. In: 2nd International Multi-Conference on Complexity, Informatics and Cybernetics (IMCIC 2011); 27-30 March 2011, Orlando, USA. (Unpublished)

Heidari, A. and Mazaheri, K. (2008) Determination of the equilibrium parameters of gaseous detonation using a genetic algorithm. Iranian Journal of Chemical Engineering, 5(3), pp. 3-13. ISSN (print) 1735-5397

Heidari, A., Ferraris, S., Wen, J.X. and Tam, V.H.Y. (2011) Numerical simulation of large scale hydrogen detonation. In: 3rd International Conference on Hydrogen Safety; 16-18 Sept 2009, Ajaccio-Corsica, France.

Heidari, A. and Wen, J.X. (2011) Numerical simulations of large scale hemispherical and pancake cloud detonation. In: International Colloquium on the Dynamics of Explosions and Reactive Systems (ICDERS), University of California, Irvine; 24-29 July 2011, Irvine, U.S.A..

Heidari, A., Pereira, J.M., Wen, J., Tam, V., Ghasemnejad, H., Shariff, H., Donchev, T. and Johnson, M (2011) Towards understanding the Buncefield explosion through advanced numerical analysis and experimental investigations. In: Hazards XXII - process safety and environmental protection; 11-14 Apr 2011, Liverpool, U.K..

Heidari, Ali and Mazaheri, Kiumars (2007) Determination of detonation equilibrium parameters using genetic algorithm. In: 15th Annual Conference (International) on Mechanical Engineering; 15 - 17 May 2007, Tehran, Iran.

Heidari, Ali, Ferraris, Sergio, Wen, Jennifer and Tam, Vincent (2008) Flame acceleration around obstacles: numerical simulation with OPENFOAM. In: 41st Meeting United Kingdom Explosion Liaison Group; 13 May 2008, Thornton, U.K.. (Unpublished)

Horikiri, K and Yao, Y. (2011) Validation study of convective airflow in an empty room. In: 2nd INEEE Conference : Energy, Environment, Devices, Systems, Communications, Computers (EEDSCC '11); 2011 (March 7-10), Venice, Italy.

Hosseini, Rahil and Mazinani, Mahdi (2007) A Practical Approach for Measuring IT-Effectiveness in Business Processes. In: IEEE International Conference on e-Business Engineering; 24-26 Oct. 2007, Hong Kong. ISBN 9780769530031

Hosseini, Seyedmohsen, Abdolah, Rushed and Khani, Amir (2008) Investigation of the idea of active suspension system application in hybrid electric vehicles. In: World Congress on Engineering 2008; 2-4 Jul 2008, London, U.K..

Hosseini, Seyedmohsen, Abdolah, Rushed and Khani, Amir (2008) A developed quasi-dimensional combustion model in spark-ignition engines. In: World Congress on Engineering 2008; 2-4 Jul 2008, London, U.K..

Hosseyni, S, Bromhead, E.N., Majrouhi Sardroud, J, Limbachiya, M.C. and Riazi, M. (2011) Integrated RFID and sensor technologies for effective landslide monitoring and early warning. In: 6th International Structural Engineering and Construction Conference; 21-26 June 2011, Zurich, Switzerland.

Hosseyni, S, Bromhead, E.N., Majrouhi Sardroud, J, Limbachiya, M.C. and Riazi, M. (2011) Real-time landslides monitoring and warning using RFID technology for measuring ground water level. In: 2nd International Conference on Disaster Management and Human Health: Reducing Risk, Improving Outcomes; 11-13 May 2011, Orlando, USA.

Huang, L.Y., Wen, J.X., Karayiannis, T G and Matthews, R D (1997) CFD modelling of heat transfer in condensing heat exchangers. International Journal of Heat and Technology, 15(1), pp. 23-30. ISSN (print) 0392-8764

Huang, L.Y., Wen, J.X., Karayiannis, T G and Matthews, R D (1998) Numerical prediction of high efficiency boiler heat exchanger performance. Applied Thermal Engineering, 18(11), pp. 1089-1099. ISSN (print) 1359-4311

Hutangkabodee, Suksun, Zweiri, Yahya H., Seneviratne, Lakmal D. and Althoefer, Kaspar (2005) Traversability prediction for unmanned ground vehicles based on identified soil parameters. In: 16th IFAC World Congress; 4-8 July 2005, Czech Republic. ISBN 9783902661753

Hutchinson, J. N., Bromhead, E. N. and Lupini, J. N. (1980) Additional observations on the Folkestone Warren landslides. Quarterly Journal of Engineering Geology and Hydrogeology, 13(1), pp. 1-31. ISSN (print) 1470-9236

I

Ibsen, M.-L. and Bromhead, E.N. (1997) Head scarps and toe heaves. In: Magnitude and frequency in Geomorphology: Proceedings of the Fourth International Conference on Geomorphology; 28 Aug - 3 Sep 1997, Bologna, Italy. (Magnitude and frequency in Geomorphology: Annals of Geomorphology, no. 115) ISSN (print) 0044-2798 ISBN 9783443211158

Ibsen, M.-L. and Brunsden, D. (1997) Mass movement and climatic variation on the south coast of Great Britain. Paläoklimaforschung - Palaeoclimate Research, 19, pp. 171-182. ISSN (print) 0930-4673

Ibsen, M.-L. and Casagli, N. (2004) Rainfall patterns and related landslide incidence in the Porretta-Vergato region, Italy. Landslides, 1(2), pp. 143-150. ISSN (print) 1612-510X

Ibsen, ML and Bromhead, EN (1999) Head scarps and toe heaves. Zeitschrift fur geomorphologie supplementband, 115, pp. 125-139. ISSN (print) 0044-2798

Ibsen, ML and Brunsden, D (1996) The nature, use and problems of historical archives for the temporal occurrence of landslides, with specific reference to the south coast of Britain, Ventnor, Isle of Wight. Geomorphology, 15(3-4), pp. 241-258. ISSN (print) 0169-555X

Ibsen, Maia-Laura, Casagli, N., Dapporto, S., Tofani, V. and Vannocci, P. (2006) Analysis of the landslide triggering mechanism during the storm of 20th - 21st November 2000, in Northern Tuscany. Landslides, 3(1), pp. 13-21. ISSN (print) 1612-510X

Irving, David (1982) Large deformation elasto-plastic finite element analysis of plates, shells and tubular joints using semiloof shell elements. (PhD thesis), Kingston Polytechnic.

Ives, A. O., Wang, J, Raghunathan, S, Benard, E. and Sloan, P. (2007) Three dimensional numerical solution of heat transfer in a honeycomb cell. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Izzard, Vanessa, Bradsell, Colin, Hadavinia, H., Morris, Valerie, Foot, P.J.S. and Witten, N. (2010) Investigation of the compression recovery properties of Polyamide-6 cellular solid over the temperature range of -5°C to 90°C. Key Engineering Materials, 417-18, pp. 933-936. ISSN (print) 1013-9826

J

Jenkins, D.P., Singh, H and Eames, P.C. (2009) Interventions for large-scale carbon emission reductions in future UK offices. Energy and Buildings, 41(12), pp. 1374-1380. ISSN (print) 0378-7788

Ji, Hua, Li, Yi and Wang, Jian (2008) A software oriented CNC system based on Linux/RTLinux. International Journal of Advanced Manufacturing Technology, 39(3-4), pp. 291-301. ISSN (print) 0268-3768

Jiang, Y.P., Guo, W. L., Yue, Z. F. and Wang, J. (2006) On the study of the effects of notch shape on creep damage development under constant loading. Materials Science and Engineering A, 437(2), pp. 340-347. ISSN (print) 0921-5093

Jung, C.K., Lee, J.B., Wang, X.Y. and Song, Y.H. (2007) Wavelet based noise cancellation technique for fault location on underground power cables. Electric Power Systems Research, 77(10), pp. 1349-1362. ISSN (print) 0378-7796

K

Kadhim, M., Donchev, T., Al-Mishhdani, S. and Al-Shaarbaf, I. (2009) Comparison between design codes and procedures for concrete beams with internal FRP reinforcement through innovation. In: Limbachiya, Mukesh C. and Kew, Hsein Y., (eds.) Excellence in concrete construction through innovation. London, U.K. : Taylor & Francis. pp. 413-417. ISBN 9780415475921

Kadhim, M., Donchev, T., Al-Mishhdani, S. and Al-Shaarbaf, I. (2008) Comparison between design codes and procedures for concrete beams with internal FRP reinforcement through innovation. In: Excellence in Concrete Construction through Innovation; 9 - 10 September 2008, Kingston upon Thames, U.K.. ISBN 9780415475921

Kang, Y., Wen, J.X., McGrattan, K.B. and Baum, H.R. (2001) The use of a laminar flamelet approach in the large eddy simulation of flame structure at the base of a pool fire. In: 9th International Interflam conference; 17 - 19 Sept 2001, Edinburgh, U.K..

Kang, Yun (2004) Large eddy simulation of turbulent diffusion flames and pool fires. (PhD thesis), Kingston University.

Kanyeto, Oagile Jomo (2006) Investigation of the behaviour of laterally loaded thin-jointed concrete-block masonry panels. (PhD thesis), Kingston University.

Kapadoukas, G.G. and Self, A. (1995) Taxonomy of aircraft ground modal behaviour: a brief report. Simulation, 65(4), pp. 257-266. ISSN (print) 0037-5497

Kapadoukas, GG, Self, AW and Marteau, F (1997) The simulation of aircraft landing gears during usual and unusual manoeuvers. In: UNSPECIFIED, (ed.) 20th Congress of the International Council of the Aeronautical Sciences. Reston, VA, U.S.A. : American Institute of Aeronautics & Astronautics. pp. 2678-2688. (AIAA Conference Proceedings Series, no. ICAS 199) ISBN 1563472198

Kapadoukas, GG, Self, AW and Marteau, F (1996) The simulation of aircraft landing gears during usual and unusual manoeuvres. In: 20th Congress of the International Council of the Aeronautical Sciences; 8-13 Sep 1996, Sorrento, Italy. (AIAA Conference Proceedings Series) ISBN 1563472198

Kapadoukas, GG and Self, A (2000) A taxonomy of aircraft ground handling modes. Aircraft Engineering and Aerospace Technology, 72(4), pp. 328-333. ISSN (print) 1748-8842

Kennedy, T., Self, D. G., Self, A and Safa, M. (1997) The manufacture of a low cost instrument for the Mars 96 mission. In: Factory 2000 - The Technology Exploitation Process, Fifth International Conference; 2-4 April 1997, London, UK. (IEE Conference Publication, no. 435) ISSN (print) 0537-9989 ISBN 0852966822

Kennedy, T., Self, D., Self, A. and Safa, M. (1998) The use of simulation techniques in the design and manufacture ofsatellites. In: Simulation '98; 30 Sept - 2nd Oct 1998, York, UK. (IEE Conference Publication Series, no. 457) ISSN (print) 0537-9989 ISBN 0852967098

Kew, H., Etebar, K., Limbachiya, M. and Kenny, M.J. (2008) Investigation into the potential of rubberised concrete products. In: Excellence in Concrete Construction through Innovation; 09 - 10 Sep 2008, Kingston upon Thames, U.K.. ISBN 9780415475921

Kew, H.Y. and Kenny, M.J. (2009) Developing viable products using recycled rubber tyres in concrete. In: Limbachiya, Mukesh C. and Kew, Hsein Y., (eds.) Excellence in concrete construction through innovation. London, U.K. : Taylor & Francis. pp. 523-531. ISBN 9780415475921

Kew, H.Y. and Kenny, M.J. (2008) Developing viable products using recycled rubber tyres in concrete. In: Excellence in Concrete Construction through Innovation; 9 - 10 September 2008, Kingston upon Thames, U.K.. ISBN 9780415475921

Kew, H.Y., Etebar, K., Limbachiya, M.C. and Kenny, M.J. (2009) Investigation into the potential of rubberised concrete products. In: Limbachiya, Mukesh C. and Kew, Hsein Y., (eds.) Excellence in concrete construction through innovation. London, U.K. : Taylor & Francis. pp. 533-543. ISBN 9780415475921

Kew, Hsein Yang (2007) Investigation into the potential of rubberised concrete products. (PhD thesis), University of Strathclyde.

Khalili, S. M. R., Tavakolian, M. and Sarabi, A. (2010) Mechanical properties of nanoclay reinforced epoxy adhesive bonded joints made with composite materials. In: 3rd International Conference of Adhesion Science and Technology on Advanced Computational Engineering and Experimenting (ACE-X 2009); 22-23 Jun 2009, Rome, Italy. (Unpublished)

Khalili, S.M.R., Jafarkarimi, M.H. and Abdollahi, M.A. (2009) Creep analysis of fibre reinforced adhesives in single lap joints - experimental study. International Journal of Adhesion and Adhesives, 29(6), pp. 656-661. ISSN (print) 0143-7496

Khalili, S.M.R., Ghaja, R., Sadeghinia, M, Mittalc, R. K. and Mason, P. (2010) Effect of patching on charpy impact response of repaired notched plate - Experimental study. Journal of Adhesion, 86(5 & 6), pp. 561-585. ISSN (print) 0021-8464

Khalili, S.M.R., Daghigh, V. and Farsani, R.E. (2011) Mechanical behavior of basalt fiber-reinforced and basalt fiber metal laminate composites under tensile and bending loads. Journal of Reinforced Plastics and Composites, 30(8), pp. 647-659. ISSN (print) 0731-6844

Kock, P., Welfers, H.J., Passenberg, P., Gnatzig, S., Stursberg, O. and Ordys, A. (2008) Energieeinsparung beim Betrieb von Nutzfahrzeugen durch pradiktive Regelungsstrategien in der Langsdynamikregelung. In: Energieeinsparung durch Elektronik im Fahrzeug; 15 -16 Oct 2008, Baden-Baden, Germany.

Kock, P., Welfers, H-J, Passenberg, B., Gnatzig, S., Stursberg, O. and Ordys, A.O. (2008) Saving energy through predictive control of longitudinal dynamics of heavy trucks. In: Energieeinsparung durch Elektronik im Fahrzeug; 15-16 Oct 2008, Baden-Baden, Germany.

Kostic, B., Zhang, T. and Evans, J.R.G. (1993) Effect of molding conditions on residual stress in powder injection molding. International Journal of Powder Metallurgy, 29(3), 251 - 257. ISSN (print) 0888-7462

Kostic, B., Zhang, T. and Evans, J.R.G. (1992) The measurement of residual stress in injection-molded ceramics. Journal of the American Ceramic Society, 75(10), pp. 2773-2778. ISSN (print) 0002-7820

Koulouris, A., Limbachiya, M.C., Fried, A.N. and Roberts, J.J. (2004) Use of recycled aggregate in concrete application: case studies. In: Sustainable Waste Management and Recycling: Challenges and Opportunities.; 14 - 15 Sept 2004, Kingston, U.K..

Koulouris, Angelos (2005) Use of coarse recycled aggregates in designated concrete mixes. (PhD thesis), Kingston University.

L

Laila, D. and Gruenbacher, E. (2007) Discrete-time control design for set point tracking of a combustion engine test bench. In: 46th IEEE Conference on Decision and Control; 12-14 Dec. 2007, New Orleans, U.S.A.. ISSN (print) 0191-2216 ISBN 9781424414970

Laila, D. S. and Nesic, D. (2003) Changing supply rates for input-output to state stable discrete-time nonlinear systems with applications. Automatica, 39(5), pp. 821-835. ISSN (print) 0005-1098

Laila, D. S., Gruenbacher, E. and del Re, L. (2007) Discrete-time model reference controller design for a combustion engine test bench. In: 7th IFAC Symposium on Nonlinear Control Systems (NOLCOS); 22-24 Aug 2007, Pretoria, South Africa.

Laila, D. S. and Gruenbacher, E. (2008) Discrete-time nonlinear observer and output feedback design for a combustion engine test bench. In: 47th IEEE Conference on Decision and Control; 9-11 Dec 2008, Cancun, Mexico.

Laila, D. S. and Astolfi, A. (2005) Input-to-state stability for discrete-time time-varying systems with applications to robust stabilization of systems in power form. Automatica, 41(11), pp. 1891-1903. ISSN (print) 0005-1098

Laila, D. S., Nesic, D. and Teel, A. R. (2002) Open and closed loop dissipation inequalities under sampling and controller emulation. European Journal of Control, 8(2), pp. 109-125. ISSN (print) 0947-3580

Laila, D. S., Messina, A. R. and Pal, B. C. (2009) A refined Hilbert-Huang transform with applications to interarea oscillation monitoring. IEEE Transactions on Power Systems, 24(2), pp. 610-620. ISSN (print) 0885-8950

Laila, D.S. and Nesic, D. (2003) Discrete-time Lyapunov-based small-gain theorem for parameterized interconnected ISS systems. IEEE Transactions on Automatic Control, 48(10), pp. 1783-1788. ISSN (print) 0018-9286

Laila, Dina Shona and Gruenbacher, Engelbert (2008) Nonlinear observer and output feedback design for a combustion engine testbench. In: 17th IFAC World Congress; 6-11 Jul 2008, Seoul, South Korea.

Laila, Dina Shona, Lovera, Marco and Astolfi, Alessandro (2011) A discrete-time observer design for spacecraft attitude determination using an orthogonality-preserving algorithm. Automatica, 47(5), pp. 975-980. ISSN (print) 0005-1098

Laila, Dina Shona (2010) A note on human body weight dynamics and control based on the macronutrient and energy flux balance. In: 2010 American Control Conference (ACC); 30 Jun - 2 Jul 2010, Baltimore, Maryland, USA. (Unpublished)

Laila, Dina Shona and Astolfi, Alessandro (2006) Construction of discrete-time models for port-controlled Hamiltonian systems with applications. Systems and Control Letters, 55(8), pp. 673-680. ISSN (print) 0167-6911

Lasslberger, Markus, Gruenbacher, Engelbert and Laila, Dina Shona (2008) Data based modelling of a PEM fuel cell for control design purposes. In: 2008 IEEE Multi Conference on Systems and Control; 3-5 Sep 2008, Texas, U.S.A..

Li, S.G., Fried, A.N. and Roberts, J. (1994) Analysis of Shear Strength for Reinforced Concrete Blockwork Beams. In: 10th International Brick and Block Masonry Conference; July 1994, Calgary, Canada.

Li, T., Li, Y. and Wang, J. (2009) Innovative form design based on functional attribute. In: 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 17th AIAA/ASME/AHS Adaptive Structures Conference, 11th AIAA Non-Deterministic Approaches Conference, 10th AIAA Gossamer Spacecraft Forum; 4 - 7 May 2009, Palm Springs, California, U.S.. (Unpublished)

Li, W, Li, Y, Wang, J and Xiong, Y (2009) Functional solving process model toward product innovation design based on a functional solving model with multiple elements and evolutions. Proceedings of the Institution of Mechanical Engineers, Part B Journal of Engineering Manufacture, 223(12), pp. 1601-1614. ISSN (print) 0954-4054

Li, Wenqiang, Li, Yan, Wang, Jian and Liu, Xiaoying (2010) The process model to aid innovation of products conceptual design. Expert Systems with Applications, 37(5), pp. 3574-3587. ISSN (print) 0957-4174

Li, Yan, Wang, Jian, Li, Xianglong and Zhao, Wu (2007) Design creativity in product innovation. International Journal of Advanced Manufacturing Technology, 33(3-4), pp. 213-222. ISSN (print) 0268-3768

Lilley, P. A., Mason, P.J. and Blunn, G. W. (1998) In vitro generation of replacement knee wear by simulation. In: International Conference on Simulation; 30 Sept - 2 Oct 1998, York, U.K.. ISSN (print) 0537-9989 ISBN 0852967098

Limbachiya, M. (1999) Adapting large area pour technology to suspended floor slabs. Concrete (London), 33(7), pp. 26-29. ISSN (print) 0010-5317

Limbachiya, M., Fudge, C.A. and Roberts, J. (2008) Behaviour and design of low density aircrete mansonry. In: 14th International Brick and Block Masonry Conference; 17 - 20 Feb 2008, Sydney, Australia. ISBN 9781920701925

Limbachiya, M.C. (2002) Construction and demolition waste recycling for reuse in concrete production. Wastes Management Journal, pp. 46-47. ISSN (print) 0263-8126

Limbachiya, M.C. (1999) Current perceptions of concrete admixtures. Concrete (London), 33(10), pp. 31-33. ISSN (print) 0010-5317

Limbachiya, M.C. (2002) Large area pours for suspended floor construction. In: International Challenges of Concrete Construction Congress; 5 - 6 Sept 2002, Dundee, U.K.. ISBN 9780727731760

Limbachiya, M.C., Koulouris, A., Roberts, J.J. and Fried, A.N. (2004) Performance of recycled aggregate concrete. In: RILEM International Symposium on Environment-Conscious Materials and Systems for Sustainable Development; 6-7 Sep 2004, Koriyama, Japan. ISBN 2912143551

Limbachiya, M.C., Leelawat, T. and Dhir, R.K. (1998) RCA Concrete: a Study of Properties in Fresh State, strength development and durability. In: International Symposium - Sustainable Construction: Use of Recycled; 11 - 12 Nov 1998, London, U.K.. ISBN 9780727727268

Limbachiya, M.C. (2010) Recycled aggregates: production, properties and value-added sustainable applications. Journal of Wuhan University of Technology Materials Science, 25(6), pp. 1011-1016. ISSN (print) 1000-2413

Limbachiya, M.C. and Fotiadou, S. (2010) Recycling glass waste for reuse in concrete construction. In: First International Conference on Sustainable Urbanization; 15-17 Dec 2010, Kowloon, Hong Kong. (Unpublished)

Limbachiya, M.C., Leelawat, T. and Dhir, R.K. (2000) Use of recycled concrete aggregate in high-strength concrete. Materials and Structures, 33(9), 574- 580. ISSN (print) 1359-5997

Limbachiya, Mukesh, Sammons, Mike and Harding, Kim (2003) Sustainable construction guide for the development industry. (Technical Report) London : RUDI.

Limbachiya, Mukesh C. and Roberts, John J. (2005) Autoclaved aerated concrete: innovation and development. London, U.K. : Taylor & Francis. ISBN 9780415383561

Limbachiya, Mukesh C. and Kew, Hsein Y., eds. (2009) Excellence in concrete construction through innovation. London, U.K. : Taylor & Francis. 578p. ISBN 9780415475921

Liu, B., Zhang, T. and Gawne, D.T. (2000) Computational analysis of the influence of process parameters on the flow field of a plasma jet. Surface and Coatings Technology, 132(2-3), pp. 202-216. ISSN (print) 0257-8972

Liu, B., Zhang, T., Bao, Y. and Gawne, D.T. (2002) Numerical modelling of motion and heating of particles during plasma spraying. Surface Engineering, 18(5), pp. 350-357. ISSN (print) 0267-0844

Liu, F. and Wen, J.X. (1999) Development and validation of an advanced turbulence model for buoyancy driven flows in enclosures. International Journal of Heat and Mass Transfer, 42(21), pp. 3967-3981. ISSN (print) 0017-9310

Liu, J., Zhang, T., Bao, Y. and Gawne, D.T. (2010) Processing and properties of plasma sprayed silicon nitride-glass composite coatings. Advance in Applied Ceramics, 109(6), pp. 355-361. ISSN (print) 1743-6753

Liu, J., Zhang, T., Bao, Y. and Gawne, D.T. (2010) Sintering behaviour of glass-silicon nitride composites for thermal spray precursor powders. Advances in Applied Ceramics: Structural, Functional and Bioceramics Journal - Advances in Psychiatric Treatment, 109(2), pp. 71-78. ISSN (print) 1743-6753

Liu, Y., Feng, Z., Yu, K., Yue, Z. and Wang, J. (2007) Influence of fuel pump failure on the fuel feeding stability of an aircraft fuel system. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Lo, Sing Hon, Voke, Peter R. and Rockliff, Nicole J. (2000) Eddy structures in a simulated low Reynolds number turbulent boundary layer. Flow, Turbulence and Combustion, 64(1), pp. 1-28. ISSN (print) 1386-6184

Lu, Zhenzhou, Song, Shufang, Yue, Zhufeng and Wang, Jian (2008) Reliability sensitivity method by line sampling. Structural Safety, 30(6), pp. 517-532. ISSN (print) 0167-4730

Lung, A. and Mebrahtu, H. (1994) Integrated real-time manufacturing simulation with expert advice. In: 10th National Conference on Manufacturing Research; 5 - 7 Sept 1995, Loughborough, U.K.. ISBN 0748402543

Lung, A. and Mebrahtu, H. (1996) Using expert system to aid interpreting manufacturing simulation results. In: 12th International Conference on CAD/CAM Robotics and Factories of the Future; 14-16 Aug 1996, London, U.K.. ISBN 9781898253037

Lung, A.W.M. (1998) Benefits of a systematic approach for problem analysis on manufacturing simulation modelling. In: International Conference on Simulation; 30 Sep - 2 Oct 1998, York, U.K.. ISSN (print) 0537-9989 ISBN 0852967098

Lung, A.W.M., Benhadj-Djilali, R. and Garcia, J.A. (2002) Total virtual factory - a new approach for technology convergence. In: 18th National Conference on Manufacturing Research; 10-12 Sep 2002, Leeds, United Kingdom. (Advances in Manufacturing Technology, no. XVI) ISBN 9781860583780

Lung, A.W.M., Benhadj-Djilali, R. and Garcia, J.A. (2004) Web-based integration for virtual factory implementation. In: Cheng, Kai , Webb, David and Marsh, Rodney, (eds.) Advances in E-Engineering and Digital Enterprise Technology: Proceedings of the 4th International Conference on E-Engineering and Digital Enterprise. Bury St. Edmunds, Suffolk, UK : Professional Engineering Publishing. pp. 553-559. ISBN 9781860584671

Lung, A.W.M., Benhadj-Djilali, R. and Garcia, J.A. (2003) An internet-based total virtual factory for inter-enterprise integration. In: First Conference on Manufacturing Research; September 2003, Glasgow, United Kingdom. (Advances in Manufacturing Technology, no. Xv11) ISBN 9781860584121

Lung, Andy (1995) Develop a systematic methodology to aid stimulation modelling. In: 11th National Conference on Manufacturing Research; 12 - 14 Sept 1995, Leicester, U.K.. ISBN 0748404007

Lung, Andy and Mebrahtu, Habtom (1995) Using expert algorithm in a manufacturing simulator for continuous scheduling optimisation. In: 11th National Conference on Manufacturing Research; 12 - 14 Sept 1995, Leicester, U.K.. ISBN 0748404007

M

Maidi, M. and Lesieur, M. (2005) Large eddy simulations of spatially growing subsonic and supersonic turbulent round jets. Journal of Turbulence, 6, pp. 1-20. ISSN (online) 1468-5248

Maidi, M. and Yao, Y. (2008) Numerical visualization of vortex flow behavior in square jets in cross-flow. Journal of Visualization, 11(4), pp. 319-327. ISSN (print) 1343-8875

Maidi, Mohamed, Yao, Yufeng and Yao, Jun (2007) Numerical simulation of circular and non circular jets in cross-flow. In: Fifth International Conference on Fluid Mechanics; 15-19 Aug, 2007, Shanghai, China. ISBN 9783540759942

Maidi, Mohamed, Yao, Yufeng and Yao, Jun (2007) Numerical simulation of laminar circular and noncircular jets in cross-flow. In: 5th International Conference on Fluid Mechanics; 15 - 19 Aug 2007, Shanghai, China. ISBN 9783540759942

Maidi, Mohamed and Yao, Yufeng (2007) On the flow characteristics of normal and inclined square jets in cross-flow: a numerical study. In: 5th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics; 25 - 27 Aug 2007, Vouliagmeni, Greece. ISBN 9789608457997

Maidi, Mohamed and Yao, Yufeng (2007) On the flow interactions of multiple jets in cross-flow. In: 5th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics; 25 - 27 Aug 2007, Vouliagmeni, Greece.

Majrouhi Sardroud, J and Limbachiya, M.C. (2010) Effective information delivery at construction phase with integrated application of RFID, GPS and GSM Technology. In: World Congress on Engineering 2010; 30 Jun - 2 Jul 2010, London, UK.

Majrouhi Sardroud, J and Limbachiya, M.C. (2010) Effective information delivery at construction phase with integrated application of RFID, GPS and GSM technology. Lecture Notes in Engineering and Computer Science, 2183(1), pp. 425-431. ISSN (print) 2078-0958

Majrouhi Sardroud, J and Limbachiya, M.C. (2010) Improving construction supply chain management with integrated application of RFID technology and portal system. In: The 8th International Conference on Logistics and SCM Research (RIRL 2010); 29 Sept - 01 Oct 2010, Bordeaux, France. (Unpublished)

Majrouhi Sardroud, J and Limbachiya, Mukesh C. (2010) Integrated advance data storage technology for effective construction logistics management. In: 27th International Symposium on Automation and Robotics in Construction; 25-27 June 2010, Bratislava, Slovakia.

Majrouhi Sardroud, J and Limbachiya, M.C. (2011) Towards linking islands of information within construction projects utilizing combined RF technologies. In: Ao, S.I. and Gelman, L., (eds.) Electrical Engineering and Applied Computing. London, U.K. : Springer. pp. 197-207. (Lecture Notes in Electrical Engineering) ISSN (print) 1876-1100 ISBN 9789400711914

Majrouhi Sardroud, J and Limbachiya, M.C. (2010) Utilization of Advanced Data Storage Technology to Conduct Construction Industry on Clear Environment. Journal of World Academy of Science, Engineering and Technology, 66, pp. 808-813. ISSN (online) 1307-6884

Majrouhi Sardroud, J., Limbachiya, M.C. and Saremi, A.A. (2010) Ubiquitous tracking and locating of construction resource using GIS and RFID. In: 6th GIS Conference & Exhibition (GIS 88); 6 Jan 2010, Tehran, Iran.

Maleki, A, Donchev, T., Hadavinia, H. and Cheah, A (2010) Behaviour of steel shear wall systems with cut-outs and stiffeners. In: International Conference on Structures & Architecture; 21 -23 July 2010, Guimaraes, Portugal. ISBN 9780415492492

Mangat, P.S. and Limbachiya, M.C. (1999) Effect of initial curing on chloride diffusion in concrete repair materials. Cement and Concrete Research, 29(9), pp. 1475-1485. ISSN (print) 0008-8846

Mangat, P.S. and Limbachiya, M.C. (1997) Repair material properties for effective structural application. Cement and Concrete Research, 27(4), pp. 601-617. ISSN (print) 0008-8846

Mangat, P.S. and Limbachiya, M.C. (1995) Repair material properties which influence long-term performance of concrete structures. Construction and Building Materials, 9(2), pp. 81-90. ISSN (print) 0950-0618

Manickam, B., Franke, J., Muppala, S.P.R. and Dinkelacker, F. (2009) LES of triangular-stabilized lean premixed turbulent flames with an algebraic reaction closure: quality and error assessment. In: Quality and Reliability of Large-Eddy Simulations II, QLES2009; 9 - 11 Sep 2009, Pisa, Italy.

Mansouri, H., Monshi, A. and Hadavinia, H. (2004) Effect of local induction heat treatment on the residual stresses in the web region of a welded rail. The Journal of Strain Analysis for Engineering Design, 39(3), pp. 271-283. ISSN (print) 0309-3247

Marir, F, Rezgui, F and Benhadj-Djilali, R (2000) A case-based expert system for construction project process activity specifications. International Journal in Construction Information Technology, 8(1), pp. 53-73. ISSN (online) 0968-0365

Marrocchino, E., Fried, A.N., Koulouris, A. and Vaccaro, C. (2009) Micro-chemical/structural characterisation of thin layer masonry: a correlation with engineering performance. Construction and Building Materials, 23(1), pp. 582-594. ISSN (print) 0950-0618

Marrocchino, Elena and Koulouris, Angelos (2007) Petro-chemical investigation as a tool for quality control in the production of recycled aggregates for concrete. In: European Geosciences Union General Assembly; 15 - 20 Apr 2007, Vienna, Austria.

Mashayekhi, M., Ziaei-Rad, S., Parvizian, J., Niklewicz, J. and Hadavinia, H. (2007) Ductile crack growth based on damage criterion: experimental and numerical studies. Mechanics of Materials, 39(7), pp. 623-636. ISSN (print) 0167-6636

Mashayekhi, M., Ziaei-Rad, S., Parvizian, J. and Hadavinia, H. (2007) Evaluation of fracture in a three stage forging process using continuum damage mechanics. In: 9th International Conference on Numerical Methods in Industrial Forming Processes : NUMIFORM '07; 17-21 Jun 2007, Porto, Portugal. (AIP Conference Proceedings, no. 908) ISBN 9780735404151

Mason, Peter (2007) A historical perspective of engineering maintenance training. In: Maintenance Engineering Training - Meeting future airworthiness challenges; 5 - 6 Sept 2007, London, U.K..

Mazaheri, K. and Heidari, A. (2006) Determining the equilibrium composition of combustion products. In: 1th National Iranian Congress of Chemical Engineering; 28 - 30 Nov 2006, Tehran, Iran.

Meddah, M S and Tagnit-Hamou, A (2008) Effect of mineral admixtures on shrinkage measured on massive concrete elements. In: Creep, Shrinkage and Durability Mechanics of Concrete and Concrete Structures, Proceeding of the 8th International Conference, CONCREEP8; 02 Sep - 02 Oct 2008, Ise-Shima, Japan.

Meddah, M Seddik, Sato, R and Suzuki, M (2009) Shrinkage reducing effect of a combination of shrinkage-compensating agents on high-performance concrete. In: Tenth ACI International Conference on Recent Advances in Concrete Technology and Sustainability Issues; 14-16 Oct 2009, Seville, Spain.

Meddah, Mohammed Seddik and Sato, Ryoichi (2010) Effect of curing methods on autogenous shrinkage and self-induced stress of high-performance concrete. ACI Materials Journal, 107(1), pp. 65-74. ISSN (print) 0889-325X

Meddah, Mohammed Seddik, Zitouni, Salim and Belaâbes, Saïd (2010) Effect of size and content of coarse aggregate on the compressive strength of concrete. Construction and Building Materials, 24(4), pp. 505-512. ISSN (print) 0950-0618

Meddah, Mohammed Seddik and Tagnit-Hamou, Arezki (2011) Evaluation of rate of deformation for early-age concrete shrinkage analysis and time zero determination. ASCE Journal of Materials in Civil Engineering, 23(7), pp. 1076-1086. ISSN (print) 0899-1561

Meddah, Mohammed Seddik, Suzuki, Masahiro and Sato, Ryoichi (2011) Influence of a combination of expansive and shrinkage-reducing admixture on autogenous deformation and self-stress of silica fume high-performance concrete. Construction and Building Materials, 25(1), pp. 239-250. ISSN (print) 0950-0618

Meddah, Mohammed Seddik and Tagnit-Hamou, Arezki (2009) Pore structure of concrete with mineral admixtures and its effect on self-desiccation shrinkage. ACI Materials Journal, 106(3), pp. 241-250. ISSN (print) 0889-325X

Meddah, Mohammed Seddik and Bencheikh, Mohamed (2009) Properties of concrete reinforced with different kinds of industrial waste fibre materials. Construction and Building Materials, 23(10), pp. 3196-3205. ISSN (print) 0950-0618

Mehdigoli, H., Rahnejat, H. and Gohar, R. (1990) Vibration response of wavy surfaced disk in elastohydrodynamic rolling contact. Wear, 139(1), pp. 1-15. ISSN (print) 0043-1648

Minelly, S., Curley, A., Giaccone, P.R. and Jones, G.A. (1998) Multi-channel adaptive signal processing of colour cinematographic imagery. In: Noblesse Workshop on Non-Linear Model Based Image Analysis; 1-3 Jul 1998, Glasgow, U.K.. (Proceedings of NMBIA) ISBN 9783540762584

Moore, R., Murphy, A., Price, M and Wang, J (2007) Analysis driven design and optimization methods for aircraft structures using finite element analysis. In: 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference; 23-26 Apr 2007, Waikiki, Hawaii.

Morgan, Michelle (2011) Enhancing the first year student experience: future challenges. In: 3rd National Transition Conference; 17 Jun 2011, London, U.K.. (Unpublished)

Muppala, S., Aluri, N.K. and Dinkelacker, F. (2007) LES quality assessment methods for high reynolds number combusting flows. In: European Combustion meeting; 11 - 13 Apr 2007, Crete, Greece.

Muppala, S., Wen, J. and Aluri, N. (2007) Modelling issues of lean high- pressure turbulent premixed hydrogen- enriched hydrocarbon combustion at gas turbine conditions. In: 5th International Energy Conversion Engineering Conference and Exhibit; 25 - 27 June 2007, St. Louis, Missouri.

Muppala, S., Aluri, N.K., Dinkelacker, F and Wen, J.X. (2007) Reaction modelling of multi-component fuel lean premixed turbulent flames. In: Third European Combustion Meeting; 11 - 13 Apr 2007, Chania, Crete.

Muppala, S. P. Reddy and Dinkelacker, Friedrich (2003) Numerical calculation of turbulent premixed Methane, Ethene and Propane/Air Flames at pressures up to 10 bar. In: European Combustion meeting; 25 - 28 Oct 2003, Orleans, France.

Muppala, S. P. Reddy (2006) A modelling approach for hydrogen-doped lean premixed turbulent combustion. In: ASME International mechanical engineering congress and exposition; 5 - 10 Nov 2006, Chicago, U.S.A..

Muppala, S.P.R., Nakahara, M., Aluri, N.K., Kido, H., Wen, J.X. and Papalexandris, M.V. (2009) Experimental and analytical investigation of the turbulent burning velocity of two-component fuel mixtures of hydrogen, methane and propane. International Journal of Hydrogen Energy, 34(22), pp. 9258-9265. ISSN (print) 0360-3199

Muppala, S.P.R. and Dinkelacker, F (2004) Numerical modelling of the pressure dependent reaction source term for premixed turbulent methane/air flames. Progress in Computational Fluid Dynamics, an International Journal, 4(6), 328- 336. ISSN (print) 1468-4349

Muppala, S.P.R., Badiger, R., Manickam, B and Wen, J.X. (2010) RANS simulation of high-pressure premixed, turbulent lean flames in PSI combustor. In: 8th Asia-Pacific Conference on Combustion; 10 - 13 Dec, 2010, Hyderabad, India.

Muppala, S.P.R., Aluri, N.K. and Dinkelacker, F. (2005) A test of validation of turbulent premixed models for high-pressure bunsen flames. In: European Combustion meeting; 3 - 6 Apr 2005, Louvain-la-Neuve, Belgium.

Muppala, Siva P.R. and Wen, Jennifer X. (2007) Lean premixed turbulent flames vs. hydrogen explosion: a short survey covering experimental, theoretical and analytical studies. In: UKELG 39th meeting: Experimental Studies in Gas Explosions; 30 Mar 2007, Kingston, U.K..

Muppala, Siva P.R., Papalexandris, M.V., Manickam, B., Aluri, N.K. and Dinkelacker, F. (2006) Numerical simulation of lean premixed turbulent hydrogen/hydrocarbon flames at elevated pressures. In: 10th International Workshop on Premixed Turbulent Flames; 12 - 13 Aug 2006, Mainz, Germany.

Muppala, Siva Prasad Reddy (2005) Modelling of turbulent premixed high-pressure combustion with application towards gas turbine combustors. (PhD thesis), Friedrich-Alexander-Universitat Erlangen-Nurnberg.

Murray, M.G. and Murray, P.M. (2005) WatSup model: a high resolution water supply modelling system. Journal of Hydroinformatics, 7(2), pp. 79-89. ISSN (print) 1464-7141

N

Nesic, D. and Laila, D. S. (2002) A note on input to state stabilization for nonlinear sampled-data systems. IEEE Transactions on Automatic Control, 47(7), pp. 1153-1158. ISSN (print) 0018-9286

Nesterov, Alexey (2006) The effects of corrosion, cold expansion and interference fit on the fatigue of aluminium alloy specimens containing fastener holes. (PhD thesis), Kingston University.

Nuesse, Gregor, Wieland, Hans-Jochaim, Limbachiya, Mukesh and Herr, Roland (2011) Active management of the early innovation phases in steel application research for the construction sector. Steel Construction - Design and Research, 4(1), pp. 34-40. ISSN (print) 1867-0520

Nuesse, Gregor, Limbachiya, Mukesh and Herr, Roland (2010) Integrated management of steel application research - SME appropriate cooperation between the steel industry and the construction sector. Wissenschaftsmanagement, 16(1), pp. 43-49. ISSN (print) 0947-9546

O

O'Reilly, M. and Sfakiananki, E. (2002) Historic contamination law empowers civil engineers to clean up. Proceedings of the ICE - Civil Engineering, 150(1), pp. 29-34. ISSN (print) 0965-089X

O'Reilly, M.P. and Stovin, V.R. (1996) Trenchless construction: risk assessment and management. Trenchless Technology Research, 11(1), pp. 25-35. ISSN (print) 1064-4156

Oliveira, Carlos A. Grassmann R. (2010) Water supply to Portuguese regional hospitals: a contribution for the knowledge of the water consumption patterns in Portuguese regional hospitals. (PhD thesis), Kingston University.

Omer, J R, Delpak, R and Robinson, R B (2002) Instrumented load tests in mudstone: pile capacity and settlement prediction. Canadian Geotechnical Journal, 39(6), pp. 1254-1272. ISSN (print) 0008-3674

Omer, J. R. (2010) Implementation of approximate and finite element methods to predict negative skin friction and settlement of piles induced by ground water lowering. In: Second International Conference on Geotechnical Engineering; 25-27 October 2010, Hammamet, Tunisia.

Omer, J. R., Robinson, R. B., Delpak, R. and Shih, J. K. C. (2003) Large scale pile tests in Mercia mudstone: data analysis and evaluation of current design methods. Journal of Geotechnical and Goelogical Engineering, 21(3), pp. 167-200. ISSN (print) 0960-3182

Omer, J. R. (1998) Numerical analysis of pile test data from instrumented large diameter bored piles formed in Keuper marl (Mercia mudstone). (PhD thesis), University of Glamorgan.

Omer, J. R., Delpak, R. and Robinson, R. B. (2002) Semi-analytical solutions for vertically loaded piles in clay/weak rocks. In: 8th International Symposium NUMOG VIII; 10-12 Apr 2002, Rome, Italy. ISBN 9789058093592

Omer, J. R., Delpak, R and Robinson, R. B. (2010) An empirical method of analysis of load transfer and settlement behaviour of single piles. Journal of Geotechnical and Geological Engineering, 28(4), pp. 483-501. ISSN (print) 0960-3182

Omer, J. R., Delpak, R and Robinson, R. B. (2006) A new computer program for pile capacity prediction using CPT data. Journal of Geotechnical and Geological Engineering, 24(2), pp. 399-426. ISSN (print) 0960-3182

Omer, Joshua (2007) Modelling and analysis of an elastic compound strut in axial compression. In: World Congress on Engineering 2007; 02-04 July 2007, London, U.K..

Omer, Joshua R. and Delpak, Ray (2007) Analysis of drilled cast in-situ single piles in axial loading. Electronic Journal of Geotechnical Engineering, 12(A), ISSN (print) 1090-0241

Omer, Joshua R. (2010) A numerical model for load transfer and settlement of bored cast in-situ piles. In: 35th Annual Conference on Deep Foundations; 12-15 Oct 2010, Hollywood, U.S.A..

Omer, Joshua Ramogi (1992) Structural strength and performance of cement-stabilised murram. (Other thesis), University of Nairobi.

Ordys, A., Karwatzki, J. and Curley, A (2006) Practical aspects of predictive control algorithms. In: 5th WSEAS International Conference on System Science and Simulation in Engineering (ICOSSE 2006); 16-18 Dec 2006, Tenerife, Canary Islands, Spain. (Proceedings of the 5th WSEAS Int. Conf. on System Science and Simulation in Engineering) ISSN (print) 1790-5117 ISBN 9608457572

Ordys, A., Karwatzki, J. and Curley, A. (2006) Test results for predictive control algorithms. WSEAS Transactions on Systems and Control, 1(2), pp. 121-128. ISSN (print) 1991-8763

Ordys, Andrew, Burley, Richard, Curley, Andrew, Francik, Jaroslaw, Godwin, Adrian and Smolenski, Piotr (2009) A multidisciplinary knowledge transfer partnership in development of lift simulator. In: Innovation through knowledge transfer 2009: research with impact; 02 Dec 2009, East Molesey, U.K..

Ordys, Andrzej W., Pike, A.W., Johnson, Michael A., Katebi, Reza M. and Grimble, Michael J. (1994) Modelling and simulation of power generation plants. London : Springer Verlag. (Advances in Industrial Control) ISBN 9783540199076

Ordys, Andrzej W. and Kock, Peter (2007) Software tests for model based applications in the automotive industry. In: 7th WSEAS International Conference on Systems Theory and Scientific Computation (ISTASC '07); 24 - 26 Aug 2007, Athens, Greece. (Unpublished)

Osborne, B., Suvorovs, T., De Wit, J. and Steinberg, T. (2003) Microanalysis of Quenched and Self-extinguished Aluminium Rods Burned in Oxygen. In: Steinberg, Theodore A. , Newton, Barry E. and Beeson, Harold D., (eds.) Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Tenth Volume. West Conshohocken, PA, U.S. : ASTM International. pp. 151-163. (no. STP 1454) ISBN 9780803134706

Ouazzane, Abdel K. and Benhadj-Djilali, Redha (2002) Laser probe design for carbon content in ash measurement. Sensor Review: the International Journal of Sensing for Industry, 22(4), pp. 341-347. ISSN (print) 0260-2288

Ouazzane, K. and Benhadj, R. (2007) An experimental investigation and design of flow-conditioning devices for orifice metering. Journal Of Mechanical Engineering Science - Part C, 221(3), pp. 281-291. ISSN (print) 0954-4062

Ouchagour, Youssef (2007) Suitability of recycled concrete aggregate for use in binary cement concrete. (PhD thesis), Kingston University.

P

Papadopoulos, C., Self, A. and Kapadoukas, G. (1998) The development of a total system aircraft landing control scheme. In: International Conference on Simulation; 30 Sep - 2 Oct 1998, York, United Kingdom. (IEE Conference Publications, no. 457) ISSN (print) 0537-9989 ISBN 0852967098

Pearson, M.C.K., Donchev, T. and Limbachiya, M. (2011) An investigation into the sustainability of FRP reinforcing bars. In: Fourth International Conference on Durability & Sustainability of Fiber Reinforced Polymer (FRP) Composites for Construction and Rehabilitation; 20-22 July 2011, Quebec City, Canada.

Pereira, J., Tam, V., Ghasemnejad, H., Shariff, H., Wen, J. and Donchev, T. (2011) Numerical and experimental investigations on the blast resistance of lightweight metal boxes. FABIG Newsletter(57),

Pereira, J. M, Ghasemnejad, H., Wen, J.X and Tam, V.H.Y (2011) Blast response of cracked steel box structures repaired with carbon fibre-reinforced polymer composite patch. Materials & Design, 32(5), pp. 3092-3098. ISSN (print) 0261-3069

Pereira, J.M., Ghasemnejad, H., Wen, J., Lourenco, P. and Tam, V.H.Y. (2010) Blast resistance of cracked steel structures repaired with CFRP composite patch. In: 8th National Conference on Seismology and Earthquake Engineering; 20-23 Oct 2010, Aveiro, Portugal. (Unpublished)

Petkova, D., Donchev, T. and Wen, J. (2008) FE modelling of the effect of elevated temperatures on the anchoring of CFRP laminates. In: International Conference on Concrete Construction; 9-10 September 2008, Kingston-upon-Thames, U.K.. ISBN 9780415475921

Petkova, D., Donchev, T. and Wen, J. (2009) FE modelling of the effect of elevated temperatures on the anchoring of CFRP laminates. In: Limbachiya, Mukesh C. and Kew, Hsein Y., (eds.) Excellence in concrete construction through innovation. London, U.K. : Taylor & Francis. pp. 351-355. ISBN 9780415475921

Petkova, Diana (2010) Behaviour of RC beams strengthened with CFRP laminates at elevated temperatures. (PhD thesis), Kingston University.

Phipps, M.A., Pritchard, G. and Aboutorabi, A. (1995) The role of particle strength and filler volume fraction in the fracture of alumina-trihydrate filled epoxy-resins. Polymers and Polymer Composites, 3(2), pp. 71-77. ISSN (print) 0967-3911

Pritchard, G., Swan, M. and Rose, R.G. (1995) Plastic zone radius of crosslinked bismaleimide resins. Polymer International, 36(1), pp. 1-8. ISSN (print) 0959-8103

Q

Qiu, H, Li, Y, Cheng, K, Li, Y. B. and Wang, J (2000) An approach to form deviation evaluation for CMM measurement of 2D curve contours. Journal of Materials Processing Technology, 107(1-3), pp. 119-126. ISSN (print) 0924-0136

Qiu, H., Li, Y.-B., Cheng, K., Li, Y. and Wang, J. (2000) A study on an evaluation method for form deviations of 2D contours from coordinate measurement. The International Journal of Advanced Manufacturing Technology, 16(6), pp. 413-423. ISSN (print) 0268-3768

Qiu, Hua, Lin, Chang-Jun, Li, Zi-Ye, Ozaki, Hiroaki, Wang, Jian and Yue, Yong (2005) A universal optimal approach to cam curve design using uniform B-splines. Mechanism and Machine Theory, 40(6), pp. 669-692. ISSN (print) 0094-114X

R

Rahmani, O., Khalili, S.M.R., Malekzadeh, K. and Hadavinia, H. (2009) Free vibration analysis of sandwich structures with a flexible functionally graded syntactic core. Composite Structures, 91(2), pp. 229-235. ISSN (print) 0263-8223

Rahmani, O., Khalili, S.M.R. and Malekzadeh, K. (2010) Free vibration response of composite sandwich cylindrical shell with flexible core. Composite Structures, 92(5), pp. 1269-1281. ISSN (print) 0263-8223

Ransom, E.C.P. and Self, A.W. (2002) The origins of aerospace engineering degree courses. Aircraft Engineering and Aerospace Technology, 74(4), pp. 355-364. ISSN (online) 1748-8842

Rao, M., Wen, J.X. and Tam, V.H.Y. (2010) Numerical simulation of turbulent flame-wall quenching using coherent flamelet model. In: Eighth International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions; 05-10 Sep 2010, Yokohama, Japan.

Rao, V.C.M., Heidari, A, Wen, J.X. and Tam, V.H.Y. (2009) Numerical study of large scale hydrogen explosions and detonation. In: Hazards XXI - Process safety and environmental protection in a changing world; 10-12 Nov 2009, Manchester, UK. ISBN 9780852955369

Reddy, ES, Chapman, DN and O'Reilly, M (1998) Design and performance of soil-pile-slip test apparatus for tension piles. Geotechnical Testing Journal, 21(2), pp. 132-139. ISSN (print) 0149-6115

Reddy, ES, O’Reilly, M and Chapman, DN (1998) A computer package for the design of piles under cyclic tensile load. Computers & Structures, 69(2), pp. 149-158. ISSN (online) 0045-7949

Rees, S.W., Adjali, M.H., Zhou, Z., Davies, M. and Thomas, H.R. (2000) Ground heat transfer effects on the thermal performance of earth-contact structures. Renewable and Sustainable Energy Reviews, 4(3), pp. 213-265. ISSN (print) 1364-0321

Reutter, Oliver (2007) Assessment of masonary flexural bond strength. (PhD thesis), Kingston University.

Roberts, J J (1998) Sustainable masonry construction. In: 5th International Masonry Conference; 12-14 Oct 1998, London, U.K.. (Proceedings : British Masonry Society, no. 8) ISSN (print) 0950-9615

Roberts, J. B., Holmes, R. and Mason, P.J. (1986) Estimation of squeeze‐film damping and inertial coefficients from experimental free–decay data. Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science, 200(C2), pp. 123-133. ISSN (print) 0263-7154

Roberts, J. B. and Mason, P.J. (1986) An experimental investigation of pressure distributions in a journal bearing operating in the transition regime. Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science, 200(C4), pp. 251-264. ISSN (print) 0263-7154

Roberts, J.J. (1998) A review of recent masonry research and its relationship to the masonry 2007 innovation and research strategy. Masonry International, 12(2), pp. 38-44. ISSN (print) 0950-2289

Roberts, JJ and Bright, NJ (2000) The strengths and weaknesses of recent UK masonry research. In: 12th International Brick/Block Masonry Conference; 25 - 28 Jun 2000, Madrid, Spain. (Unpublished)

Rosario, Ricardo A.F. (2009) Modelling of the behaviour of glazing systems exposed to fires. (PhD thesis), Kingston University.

Rumschinski, P, Laila, D. S., Borchers, S. and Findeisen, R. (2010) Influence of discretization errors on set based parameter estimation. In: 49th IEEE Conference on Decision and Control; 15-17 Dec. 2010, Altlanta, Georgia, USA. ISBN 9781424477456

S

Sabir, H. M. and Eames, I. W. (1999) Performance of film absorbers under the effect of a contaminant non-absorbable gas. Applied Energy, 63(4), pp. 255-267. ISSN (print) 0306-2619

Sabir, H.M., Chretienneau, R. and ElHag, Y.B.M. (2004) Analytical study of a novel GAX-R heat driven refrigeration cycle. Applied Thermal Engineering, 24(14-15), pp. 2083-2099. ISSN (print) 1359-4311

Sabir, H.M. and Bwalya, A.C. (2002) Experimental study of capillary-assisted water evaporators for vapour-absorption systems. Applied Energy, 71(1), pp. 45-57. ISSN (print) 0306-2619

Sabir, H.M. and Eames, I.W. (1998) Theoretical comparison between lithium bromide/water vapour resorption and absorption cycles. Applied Thermal Engineering, 18(8), pp. 683-692. ISSN (print) 1359-4311

Sabir, H.M., Eames, I.W. and Suen, K.O. (1999) The effect of non-condensable gases on the performance of film absorbers in vapour absorption systems. Applied Thermal Engineering, 19(5), pp. 531-541. ISSN (print) 1359-4311

Sabir, H.M. (2001) A novel GAX-R heat driven refrigeration/heat pump cycle. In: 2nd International Heat Powered Cycles Conference; 5 - 7 Sept 2001, Paris, France.

Sabir, H.M. and ElHag, Y.B.M. (2007) A study of capillary-assisted evaporators. Applied Thermal Engineering, 27(8-9), pp. 1555-1564. ISSN (print) 1359-4311

Sabir, HM, Suen, KO and Vinnicombe, GA (1996) Investigation of effects of wave motion on the performance of a falling film absorber. International Journal of Heat and Mass Transfer, 39(12), pp. 2463-2472. ISSN (print) 0017-9310

Safa, M. M. A, Leather, J. A. and Anderson, J. C. (1979) Thin film microtransducers for elastohydrodynamic lubrication studies. Thin Solid Films, 64(2), pp. 257-262. ISSN (print) 0040-6090

Safa, M.M.A. (1982) Elastohydrodynamic studies using thin film transducers. (PhD thesis), Imperial College of Science and Technology, London.

Sahinkaya, M. N. and Burrows, C. R. (1984) Estimation of linearized oil-film parameters from the out-of-balance response. Journal Of Mechanical Engineering Science - Part C, 198(2), pp. 131-135. ISSN (print) 0954-4062

Sahinkaya, M. N., Turkay, O. S. and Burrows, C. R. (1984) Minimization of the variance in oil-film damping coefficient estimates. Journal Of Dynamic Systems, Measurement, And Control, 106(4), pp. 342-349. ISSN (print) 0022-0434

Sahinkaya, M. N., Abulrub, A. H., Keogh, P. and Burrows, C. (2009) A multiobjective adaptive controller for magnetic bearing systems. In: 54th ASME Turbo Expo 2009; 08 - 12 Jun 2009, Orlando, U.S..

Sahinkaya, M. Necip, Abulrub, Abdul-Hadi G., Keogh, Patrick S. and Burrows, Clifford R. (2007) Multiple sliding and rolling contact dynamics for a flexible rotor/magnetic bearing system. IEEE/ASME Transactions on Mechatronics, 12(2), pp. 179-189. ISSN (print) 1083-4435

Salin, A., Yao, Y. and Lo, S. (2011) Flow topology of symmetric crossing shock wave boundary layer interactions. In: 28th International Symposium on Shock Waves (ISSW 28); 17 - 22 Jul 2011, Manchester, U.K.. (Submitted)

Sayari, A, Donchev, T., Limbachiya, M.C. and Kew, H.Y. (2010) Out-of-Plane behaviour of FRP strengthened masonry walls. In: 8th International Masonry Conference- Innovative Solutions for Sustainable Masonry Construction; 4 - 7 July 2010, Dresden, Germany.

Sayari, Arash (2011) Improving the out-of-plane flexural behaviour of the FRP strengthened masonry walls. (PhD thesis), Kingston University.

Serpetsidakis, Michail I. (2005) Dynamic analysis of an active furling small wind turbine. (MSc(R) thesis), Kingston University.

Setoodeh, A.R., Hadavinia, H., Biglari, F.R. and Nikbin, K. (2005) Comparison of analytical, numerical and experimental methods in deriving fracture toughness properties of adhesives using bonded double lap joint specimens. Journal of Adhesion, 81(5), pp. 529-553. ISSN (print) 0021-8464

Sfaklanaki, E. and Stovin, V.R. (2002) A spatial framework for environmental impact assessment and route optimisation. Proceedings of the ICE - Transport, 153(1), pp. 43-52. ISSN (print) 0965-092X

Shakouri, Payman, Ordys, Andrzej, Askari, Mohamad and Laila, Dina (2010) Longitudinal vehicle dynamics using Simulink/Matlab. In: UKACC International Conference on Control; 07 - 11 Sept 2000, Cambridge, U.K..

Shang, Zhi and Yao, Yufeng (2008) CFD investigation of heat transfer in supercritical water-cooled flow through 3×3 fuel rod bundles. In: 16th International Conference on Nuclear Engineering (ICONE16); May 11–15 2008, Orlando, USA.

Shang, Zhi (2009) CFD investigation of vertical rod bundles of supercritical water-cooled nuclear reactor. Nuclear Engineering and Design, 239(11), pp. 2562-2572. ISSN (print) 0029-5493

Shang, Zhi and Lo, Simon (2010) Numerical investigation of supercritical water-cooled nuclear reactor in horizontal rod bundles. Nuclear Engineering and Design, 240(4), pp. 776-782. ISSN (print) 0029-5493

Shang, Zhi, Yao, Yufeng and Chen, Shuo (2008) Numerical investigation of system pressure effect on heat transfer of supercritical water flows in a horizontal round tube. Chemical Engineering Science, 63(16), pp. 4150-4158. ISSN (print) 0009-2509

Shih, J K C, Omer, J R, Delpak, R, Robinson, R B and Jones, C D (2007) Full-scale pile tests in sand and development of a computer program for predicting load capacity. Canadian Journal of Civil Engineering, 34(10), pp. 1222-1236. ISSN (print) 0315-1468

Singh, H, Redpath, D.A.G., Aboutorabi, A., Kattakayam, T.A. and Griffiths, P.W. (2010) Optimum configuration of compound parabolic concentrator (cpc) solar water heater types for dwellings situated in the northern maritime climate. International Journal of Ambient Energy, 31(1), pp. 47-52. ISSN (print) 0143-0750

Singh, Harjit, Eames, PC, Peacock, A and Jenkins, DP (2007) Prediction of the effectiveness of a chilled ceiling coupled borehole heat exchanger system for cooling existing UK office buildings and reducing CO2 emissions. In: Improving Energy Efficiency in Commercial Building Conference (IEECB’08); 10-11 Apr 2007, Frankfurt, Germany.

Singh, Harjit and Eames, Philip C. (2011) A review of natural convective heat transfer correlations in rectangular cross-section cavities and their potential applications to compound parabolic concentrating (CPC) solar collector cavities. Applied Thermal Engineering, 31(14-15), pp. 2186-2196. ISSN (print) 1359-4311

Sloan, B, Wang, J, Spence, S, Raghunathan, S and Riordan, D (2010) Aerodynamic performance of bypass engine with nozzle exit area change by warped chevrons. Proceedings of the Institution of Mechanical Engineers, Part G, Journal of Aerospace Engineering, 224(6), pp. 731-743. ISSN (print) 0954-4100

Sloan, B., Wang, J., Raghunathan, S., Benard, E., Cooper, R. and Spence, S. (2007) Performance and acoustic optimisation of nacelle nozzle throat area. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Sloan, Brendan, Wang, Jian, Spence, Stephen and Raghunathan, Srinivasan (2008) Parametric analysis of variable nacelle nozzle throat area using warped chevrons. In: Gas turbine Technical Congress and Exposition: ASME Turbo Expo 2008; 9-13 Jun 2008, Berlin, Germany.

Sloetjesa, Wim, Haverhalsa, Jaap, Kerkdijka, Kees, Ahmedb, Iman Osman, Sabir, Hisham, Eldinb, Shommo Shaa, Porsiusc, Rob, Stolkc, Ad, El Karibd, Asha, Yousifd, Kahil and Hassane, Hassan Wardi (1988) Operational results of the 13 kW/50 m3 solar driven cold store in Khartoum, The Sudan. Journal of Solar Energy, 41(4), pp. 341-347. ISSN (print) 0038-092X

Soroush, V.R., Ghasemnejad, Hessam, Marchant, D.R. and Aboutorabi, A. (2011) Advanced application of natural fibres in high performance automotive composite structures. In: The Nineteenth Annual International Conference on COMPOSITES/NANO ENGINEERING (ICCE-19); 24 - 30 Jul 2011, Shanghai, China. (Unpublished)

Stephenson, P. and Paun, M. (2001) Electricity market trading. Power Engingeering Journal, 15(6), pp. 277-288. ISSN (print) 0950-3366

Su, J-L. and Ordys, A.W. (2010) Collision avoidance manoeuvre for a vehicle - a practical approach. Proceedings of the Institution of mechanical Engineers Part D-Journal of Automobile Engineering, 224(3), pp. 299-312. ISSN (print) 0954-4070

Sun, Z., Chew, J.W., Hills, N.J., Volkov, K.N. and Barnes, C.J. (2010) Efficient finite element analysis/computational fluid dynamics thermal coupling for engineering applications. Journal Of Turbomachinery, 132(3), 031016. ISSN (print) 0889-504X

Suvorovs, T, De Wit, JR, Osborne, BP and Steinberg, TA (2004) Investigation of burning aluminum in oxygen-enriched atmospheres through microanalysis techniques. Journal of ASTM International, 1(8), ISSN (online) 1546-962x

Suzuki, M, Meddah, M S, Sato, R and Kawabata, T (2010) Long-term shrinkage and stress in ultra high strength concrete using porous ceramic waste for internal curing. In: Use of superabsorbent polymers and other new additives in concrete, International RILEM Conference; 15-18 Aug 2010, Lyngby, Denmark.

Suzuki, Masahiro, Meddah, Mohammed Seddik and Sato, Ryoichi (2009) Use of porous ceramic waste aggregates for internal curing of high-performance concrete. Cement and Concrete Research, 39(5), pp. 373-381. ISSN (print) 0008-8846

T

Tan, X., Chen, X., Wang, J. and Raghunathan, S. (2008) Modelling energy absorption in textile composite cellular structures. In: 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference; 7-10 April, 2008, IL, USA.

Tan, X., Xu, Y., Early, J., Wang, J., Curran, R. and Raghunathan, S. (2007) A framework for systematically estimating life cycle cost for integrated wing. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Tan, Xincai, Yan, Xiu-Tan, Juster, Neal P., Raghunathan, Srinivasan and Wang, Jian (2008) Dynamic friction model and its application in flat rolling. Journal of Materials Processing Technology, 207(1-3), pp. 222-234. ISSN (print) 0924-0136

Tan, Xincai, Chen, Xiaogang, Wang, Jian and Raghunathan, Srinivasan (2009) Energy absorption and deformation in textile composite cellular structures. AIAA Journal: devoted to aerospace research and development, 47(3), pp. 790-795. ISSN (print) 0001-1452

Tan, Xincai, Xu, Yunchun, Wang, Jian, Curran, Ricky, Raghunathan, Raghu, Gore, David and Doherty, John (2008) Life Cycle Assessment of Aluminium for Engineering Application. In: The 8th AIAA Aviation Technology, Integration, and Operations (ATIO) Conference,; 14 - 19 Sep 2008, Anchorage, Alaska.

Tan, Xincai, Wang, Jian, Xu, Yuchun, Curran, Ricky, Raghunathan, Srinivasan, Gore, David and Doherty, John (2008) Risk analysis in lifecycle costing of aluminium. In: 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference; 10-12 September 2008, British Columbia, Canada.

Thomas, Mark E., Petford, Nick and Bromhead, Edward N. (2004) Volcanic rock-mass properties from Snowdonia and Tenerife: implications for volcanic edifice strength. Journal of the Geological Society, 161(6), pp. 939-946. ISSN (print) 0016-7649

Thomas, T.G., Yao, Y.F. and Sandham, N.D. (2003) Structure and energetics of a turbulent trailing edge flow. Computers & Mathematics with Applications, 46(4), pp. 671-680. ISSN (print) 0898-1221

Tian, Y. S., Wang, J and Lu, T. J. (2007) Axial load capacity of cold-formed steel wall stud with sheathing. Thin-Walled Structure, 45(5), pp. 537-551. ISSN (print) 0263-8231

Tian, Y. S., Wang, J. and Lu, T. J. (2004) Racking strength and stiffness of cold-formed steel wall frames. Journal of Constructional Steel Research, 60(7), pp. 1069-1093. ISSN (print) 0143-974X

Tian, Y. S., Wang, J., Lu, T. J. and Barlow, C. Y. (2004) An experimental study on the axial behaviour of cold-formed steel wall studs and panels. Thin-Walled Structures, 42(4), pp. 557-573. ISSN (print) 0263-8231

Tongwei, HAN, Pengfei, HE, Wang, J and Aihui, WU (2010) The effect of vacancy defects on the tensile mechanical properties of single graphene sheets. Journal of Tongji University, 38(8), pp. 1210-1214.

Tsakiropoulos, P. and Wang, Yawei (2004) A study of particle size and velocities distributions in centrifugal atomisation using mathematical regression techniques. In: TMS 2004 : 133rd Annual Meeting & Exhibition; 14-18 Mar 2004, Charlotte, North Carolina, U.S.. (Unpublished)

V

Vautard, R., Maidi, M., Menut, L., Beekmann, M. and Colette, A. (2007) Boundary layer photochemistry simulated with a two-stream convection scheme. Atmospheric Environment, 41(37), pp. 8275-8287. ISSN (print) 1352-2310

Volkov, K (2011) Interaction of laser pulse with liquid droplet. In: 28th International Symposium on Shock Waves; 17-22 July 2011, Manchester, UK. (Unpublished)

Volkov, K. (2010) Conjugate heat transfer in a rotating disc with holes. Journal of Engineering Physics and Thermophysics, 83(2), pp. 291-302. ISSN (print) 1062-0125

Volkov, K. and Emelyanov, V. (2010) Flows and heat transfer in channels and rotating cavities. Moscow, Publishing House of Physical and Mathematical Literature. 488p. ISBN 5922111829

Volkov, K. and Emelyanov, V. (2011) Gas flows induced by fluid injection in energy systems. Moscow, Publishing House of Physical and Mathematical Literature. (In Press)

Volkov, K. and Emelyanov, V. (2008) Gas-particle flows. Moscow, Publishing House of Physical and Mathematical Literature. 598p. ISBN 9785922110006

Volkov, K. and Emelyanov, V. (2008) Large-eddy simulation of turbulent flows. Moscow, Publishing House of Physical and Mathematical Literature. 364p. (Fundamental and Applied Physics) ISBN 9785922109208

Volkov, K.N. and Emelyanov, V.N. (2008) Aerooptic effects in turbulent flow and their simulation. Technical Physics, 53(2), pp. 217-223. ISSN (print) 1063-7842

Volkov, K.N. (2010) Multigrid techniques as applied to gas dynamic simulation on unstructured meshes. Computational Mathematics and Mathematical Physics, 50(11), pp. 1837-1850. ISSN (print) 0965-5425

Volkov, K.N. (2009) Preconditioning of the Euler and Navier-Stokes equations in low-velocity flow simulation on unstructure grids. Computational Mathematics and Mathematical Physics, 49(10), pp. 1789-1804. ISSN (print) 0965-5425

Volkov, K.N. and Emel'yanov, V.N. (2008) Turbulent flows in channels with injection. Results of large eddy simulation and the two-equation turbulence model. Fluid Dynamics, 43(4), pp. 573-582. ISSN (print) 0015-4628

Volkov, Konstantin (2010) Aero-optic effects in turbulent wall-bounded and free shear flows. Engineering Letters, 18(3), pp. 285-290. ISSN (print) 1816-093X

Volkov, Konstantin (2010) Combustion of single aluminium droplet in two-phase flow. In: Stoev, George I., (ed.) Heterogeneous Combustion. Hauppauge NY, U.S.A. : Nova Science. pp. 191-260. (Chemical Engineering Methods and Technology) ISBN 9781617613241

Volkov, Konstantin (2011) Fluid/solid coupled heat transfer problems in gas turbine applications. In: Ciafone, Donna J., (ed.) Gas Turbines: Technology, Efficiency and Performance. Hauppauge NY, U.S.A. : Nova Science. pp. 121-183. (Engineering Tools, Techniques and Tables) ISBN 9781611228427

Volkov, Konstantin (2010) Interaction of laser pulse with oxygen and hydrogen mixture containing metal particles. In: IMA Conference on Fluid Problems in Process Engineering; 06 - 08 September 2010, Leeds, U.K..

Volkov, Konstantin (2010) Internal turbulent two-phase flows formed by wall injection of fluid and particles. In: 5th European Conference on Computational Fluid Dynamics (ECCOMAS CFD 2010); 14-17 June 2010, Lisbon, Portugal.

Volkov, Konstantin (2010) Large-eddy simulation of free shear and wall-bounded turbulent flows. In: Lang, Peter R. and Lombargo, Frank S., (eds.) Atmospheric Turbulence, Meteorological Modelling and Aerodynamics. Hauppauge NY, U.S.A. : Nova Science. pp. 505-574. ISBN 9781607410911

Volkov, Konstantin (2011) Simulation of turbulent flows in rotating disc cavity systems. In: Marcuso, R.J., (ed.) Turbulence: Theory, Types and Simulation. Hauppauge NY, U.S.A. : Nova Science. pp. 569-686. (Physics Research and Technology) ISBN 9781617617355

Volkov, Konstantin N., Hills, Nicholas J. and Chew, John W. (2008) Simulation of turbulent flows in turbine blade passages and disc cavities. In: ASME Turbo Expo 2008: Power for Land, Sea, and Air (GT2008); 9-13 Jun 2008, Berlin, Germany. ISBN 9780791843147

W

Wang, C.J., Xu, S.L. and Guo, C.M. (2008) Gaseous detonation propagation in a bifurcated tube. Journal of Fluid Mechanics, 599, pp. 81-110. ISSN (print) 0022-1120

Wang, J., Lu, T. J., Gault, R.I., Tian, Y. S., Li, Y., Xia, C.H. and Tan, X.C. (2008) Sound Transmission Through Lightweight Double-Leaf Partitions: Systematic Parametric Analysis,. In: 5th International conference on thin-walled structures; 18-20 June 2008, Brisbane, Australia,. ISBN 9781741072396

Wang, J., Gault, R.I., McCaughan, C., Ives, A., Tian, Y. S., Lu, T. J., He, P. and Xia, C.H. (2008) Sound transmision through lightweight double-leaf partitions: 3D modelling. In: 5th International conference on thin-walled structures; 18-20 June 2008, Brisbane, Australia,. ISBN 9781741072396

Wang, J., Lu, T.J., Woodhouse, J., Langley, R.S. and Evans, J. (2005) Sound transmission through lightweight double-leaf partitions: theoretical modelling. Journal of Sound & Vibration, 286(4-5), pp. 817-847. ISSN (print) 0022-460X

Wang, J., Tian, Y. S. and Lu, T. J. (2005) The role of frame members and sheathing in partition wall panels subject to compression. Thin-Walled Structure, 43(6), pp. 983-1002. ISSN (print) 0263-8231

Wang, Jian, Yao, Hui, Benard, Emmanuel, Cooper, Richard, Raghunathan, Srinivasan, Tweedie, James and Riordan, David (2005) Identification of aircraft noise at landing. In: 11th AIAA/CEAS Aeroacoustics Conference (26th AIAA Aeroacoustics Conference),; 23-25 May 2005, California, USA. ISBN 9781624100529

Wang, X.X., Guo, Y.Y. and Shu, P.C. (2003) Numerical modelling of heat transfer between gas and solid in a vibrated fluidised bed. Applied Thermal Engineering, 23(7), pp. 821-828. ISSN (print) 1359-4311

Wang, XX, Guo, YY and Shu, PC (2004) Investigation into gas-solid heat transfer in a cryogenic vibrated fluidised bed. Powder Technology, 139(1), pp. 33-39. ISSN (print) 0032-5910

Wang, Y.F., Yue, Z.F. and Wang, J. (2007) Experimental and numerical study of the superelastic behaviour on NiTi thin-walled tube under biaxial loading. Computational Materials Science, 40(2), pp. 246-254. ISSN (print) 0927-0256

Wang, Y.F., Yue, Z.F. and Wang, J. (2007) Numerical study of effect of surface roughness on superelastic behaviour of shape memory alloys. Materials Science and Engineering: A, 458(1-2), pp. 312-318. ISSN (print) 0921-5093

Wang, Y.F., Yue, Z.F. and Wang, J. (2007) The effect of grain orientation on the tensile-compressive asymmetry of polycrystalline NiTi shape memory alloy. Material science and engineering technology, 38(4), pp. 294-298. ISSN (print) 0933-5137

Wang, YF, Roome, RL and Benhadj-Djilali, R (1998) Development of a rule based expert system for the selection of rapid prototyping processes. In: The 18th SGES International Conference on Knowledge Based Systems and Applied Artificial Intelligence; 14-16 Dec 1998, Cambridge, UK. (ES-98 (Expert Systems-98)) ISBN 1852330872

Wang, Yawei (1995) Research on the predicting model for combustion process in direct injection supercharged diesel engines. Transactions of CSICE, 13(3), pp. 224-230. ISSN (print) 1000-0909

Welch, C.S. and Curley, A. (2005) Learning contracts for space industry staff development. In: 2nd International Conference on Recent Advances in Space Technologies (RAST 2005); 9-11 Jun2005, Istanbul, Turkey. (Proceedings of 2nd International Conference on Recent Advances in Space Technologies, 2005. RAST 2005.) ISBN 0780389778

Wen, J., Ferraris, S., Hume, B., Fay, J. and Bosley, K. (2007) Computer modelling of basement fires. In: Interflam 2007: 11th International Fire Science and Engineering Conference; 3-5 Sept 2007, London, U.K.. ISBN 9780955654800

Wen, J. X., Xu, B., Dembele, S. and Tam, V. H. Y. (2008) The effect of pressure boundary rupture rate on the spontaneous ignition of pressurized hydrogen release. In: Seventh International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions; 7-11 Jul 2008, St Petersburg, Russia. (Unpublished)

Wen, J.X. and Huang, L.Y. (2000) CFD modelling of confined jet fires under ventilation-controlled conditions. Fire Safety Journal, 34(1), pp. 1-24. ISSN (print) 0379-7112

Wen, J.X., Briggs, A and Rose, J W (1994) Enhancement of condensation heat transfer on integral-fin tubes using radiused fin-root fillets. Journal of Enhanced Heat Transfer, 1(2), pp. 211-217. ISSN (print) 1065-5131

Wen, J.X., Huang, L.Y., Amin, E.M. and Nolan, P. (1998) Modeling sooting jet fires in a large-scale offshore compartment. In: 27th International Symposium on Combustion; 02-07 Aug 1998, Boulder, CO, USA. (Twenty-seventh symposium (international) on combustion, no. 1-2)

Wen, J.X., Xu, B.P., Dembele, S., Tam, V.H.Y. and Hawksworth, S.J. (2008) Numerical study on spontaneous ignition of direct release of pressurized hydrogen into air. In: 20th NHA Annual Hydrogen Conference; 30 Mar - 2 Apr 2008, Sacramento, USA. (20th NHA Annual Hydrogen Conference 2008)

Wen, J.X., Kang, K., Donchev, T. and Karwatzki, J.M. (2007) Validation of FDS for the prediction of medium-scale pool fires. Fire Safety Journal, 42(2), pp. 127-138. ISSN (print) 0379-7112

Wen, Jennifer, Dembele, Siaka, Yang, Manjiang, Tam, Vincent and Wang, Jian (2008) Numerical investigation on the effectiveness of water spray deluge in providing cooling, smoke dilution and radiation attenuation in fires. In: Ninth International Symposium on Fire Safety Science; 21 - 26 Sept 2008, Karlsruhe, Germany.

Wen, Jennifer (2007) Numerical study of spontaneous ignition of pressurised hydrogen. In: 40th UKELG; 19-20 Sep 2007, Cardiff, Wales. (Unpublished)

Wen, Jennifer (2006) Under-ventilated compartment fires. In: Enclosure Fire Workshop; 30-31 May 2008, Belfast, U.K..

Williams, J.G., Hadavinia, H. and Cotterell, B. (2005) Anisotropic elastic and elastic-plastic bending solutions for edge constrained beams. International Journal of Solids and Structures, 42(18-19), pp. 4927-4946. ISSN (print) 0020-7683

Wright, S., Andrews, G. and Sabir, H. (2009) A review of heat exchanger fouling in the context of aircraft air-conditioning systems, and the potential for electrostatic filtering. Applied Thermal Engineering, 29(13), pp. 2596-2609. ISSN (print) 1359-4311

X

Xu, Y, Wang, J, Tan, X, Early, J., Curran, R, Raghunathan, S, Doherty, J and Gore, D (2008) Life cycle cost modelling for aircraft wing using object-oriented systems engineering approach. In: 46th AIAA Aerospace Sciences Meeting and Exhibit; 7 - 10 Jan 2008, Reno, Nevada.

Xu, Y ., Tan, X., Wang, J., Curran, R., Raghunathan, S., Doherty, J. and Gore, D. (2008) Manufacturing cost modeling for technology assessment. In: The 6th International Conference on Manufacturing Research; 09 - 11 Sep 2008, Uxbridge, U.K..

Xu, Yuchen, Wang, Jian, Tan, Xincai, Curran, Ricky, Raghunathan, Srinivasan, Doherty, John and Gore, Dave (2008) A generic life cycle cost modeling approach for aircraft system. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Xia, Changho, Wang, Jian and McMenemy, Karen (2010) Short, medium and long term load forecasting model and virtual load forecaster based on radial basis function neural networks. International Journal of Electrical Power & Energy Systems, 32(7), pp. 743-750. ISSN (print) 0142-0615

Xu, B, Wen, J.X. and Tam, V.H.Y. (2011) The effect of an obstacle plate on the spontaneous ignition in pressurized hydrogen release: a numerical study. International Journal of Hydrogen Energy, 36(3), pp. 2637-2644. ISSN (print) 0360-3199

Xu, B., Chen, Z., Wen, J.X. and Dembele, S. (2010) Large eddy simulation of fire dynamics using a mixture fraction based discrete reaction model. In: International Congress "Combustion and Fire Dynamics"; 20-23 Oct 2010, Santander, Spain. (Unpublished)

Xu, B.P., Chen, Z.B., Wen, J.X., Zhubrin, S., Dembele, S., Wang, Y. and Dorofeev, S. (2010) Large eddy simulation of a one meter diameter methane fire using the extended discrete reaction model. In: Sixth International Seminar on Fire and Explosion Hazards; 11-16 April 2010, Leeds, UK. (Unpublished)

Xu, B.P., Hima, L.EL., Wen, J.X. and Tam, V.H.Y. (2009) Numerical study of spontaneous ignition of pressurized hydrogen release into air. International Journal of Hydrogen Energy, 34(14), pp. 5954-5960. ISSN (print) 0360-3199

Xu, B.P., Wen, J. X., Dembele, S., Tam, V.H.Y. and Hawksworth, S.J. (2009) The effect of pressure boundary rupture rate on spontaneous ignition of pressurized hydrogen release. Journal of Loss Prevention in the Process Industries, 22(3), pp. 279-287. ISSN (print) 0950-4230

Xu, B.X., Yue, Z.F. and Wang, J. (2007) Indentation fatigue behaviour of polycrystalline copper. Mechanics of Materials, 39(12), pp. 10667-1080. ISSN (print) 0167-6636

Xu, Baopeng (2006) Large eddy simulation of evaporating two-phase flows. (PhD thesis), Kingston University.

Xu, Baopeng, Wen, Jennifer, Dembele, Siaka and Tam, Vincent (2008) Predicting spontaneous ignition of under-expanded hydrogen jets: the issue of numerical accuracy. In: Thirty-Second International Symposium on Combustion; 03 - 08 Aug 2008, Montreal, Canada. (Unpublished)

Xu, Y., Wang, J., Tan, X. and Curran, R. (2008) Cost-efficient materials in aerospace: composite vs aluminium. In: 15th ISPE International Conference on Concurrent Engineering (CE2008); 18-22 Aug 2008, Belfast, Northern Ireland.

Y

Yao, H., Butterfield, J., Raghunathan, S., Wang, J., Cooper, R. and Benard, E. (2005) Optimization design for thrust reverser cascade with a view to reduce noise. Multidiscipline Modelling in Materials and Structures, 1(1), pp. 63-72. ISSN (print) 1573-6105

Yao, J and Yao, Y F (2011) Computational study of hole shape effect on film cooling performance. Journal Of Power And Energy - Part A, 225(4), pp. 505-519. ISSN (print) 0957-6509

Yao, J., Yao, Y., Mason, P.J. and Zhang, T. (2008) CFD modelling of water injection flow for turbine blades cleaning. In: 2nd International Symposium on Physics of Fluids; 09 - 12 Jun 2008, Nanjing, China.

Yao, J., Yao, Y.F., Manson, P.J., Zhang, T., Heyes, F.J.G. and Roach, P.E. (2007) Computational prediction of local distorted flow in turbocharger. In: 5th International Conference on Fluid Mechanics; 15-19 Aug 2007, Shanghai, Peoples Republic of China. (New trends in fluid mechanics research: proceedings of the fifth international conference on fluid mechanics) ISBN 9787302158943

Yao, J., Sian, S., Khan, J. and Yao, Y. (2010) Effect of hole shape on blade cooling effectiveness. In: AIAA 48th Aerospace Sciences Meeting; 04-07 Jan 2010, Orlando, FL, USA.

Yao, J., Yao, Y.F., Patel, M.K. and Mason, P.J. (2006) Numerical simulation of microchannel cooling and heat transfer. In: 13th International Heat Transfer Conference; 13 - 18 Aug 2006, Sydney, Australia.

Yao, J., Mouzoun, O., Yao, Y. and Mason, P. (2009) Unsteady RANS calculation of flow over Ahmed car model. In: IUTAM Symposium on Unsteady Separated Flows and their Control; 11 - 22 June 2007, Corfu, Greece. ISBN 9781402098970

Yao, J., Mouzoun, O., Yao, Y. and Mason, P. (2007) Unsteady RaNS simulation of flow over Ahmed car model. In: IUTAM Symposium Unsteady Separated Flows and their Control; 18 - 22 June 2007, Corfu, Greece. ISBN 9781402098970

Yao, Jun, Yao, Yufeng, Mason, Peter and Zhang, Tao (2008) The CFD modelling of water injection flow in turbocharger. In: The Fifth International Conference on Computational Fluid Dynamics (ICCFD5); 7-11 July 2008, Seoul, Korea. (Submitted)

Yao, Jun, Yao, Yufeng, Mason, Peter, Zhang, Tao, Heyes, F. J. G. and Roach, P. E. (2009) CFD modelling of water injection for turbine blade cleaning. Modern Physics Letters B, 23(3), pp. 341-344. ISSN (print) 0217-9849

Yao, Jun (2010) Numerical and experimental studies of gas/liquid two-phase flow in a turbocharger. (PhD thesis), Kingston University.

Yao, Jun, Patel, Mayur K., Yao, Yufeng and Mason, Peter J. (2006) Numerical simulation of heat transfer in rectangular microchannel. In: European Conference on Computational Fluid Dynamics; 5 - 8 Sept 2006, Egmond aan Zee, The Netherlands.

Yao, Jun, Yao, Yufeng, Mason, Peter J and Patel, Mayur K (2009) Numerical simulation of heat transfer in rectangular microchannel. Advances in Applied Mathematics and Mechanics, 1(2), pp. 231-241. ISSN (print) 2070-0733

Yao, Jun, Sian, Sohan, Yao, Y. and Davis, A.W. (2010) Numerical study of hole shape effect on blade cooling effectiveness. Modern Physics Letters B, 24(13), pp. 1295-1298. ISSN (print) 0217-9849

Yao, Jun, Yao, Yufeng, Patel, Mayur and Mason, Peter (2007) On Reynolds number and scaling effects in microchannel flows. The European Physical Journal - Applied Physics, 37(2), pp. 229-235. ISSN (print) 1286-0042

Yao, Jun, Yao, Yufeng, Mason, Peter, Zhang, Tao, Heyes, F. J. G. and Roach, P. E. (2009) Simulation of gas water two-phase flow in diesel turbocharger. In: 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion (ISMF2009); 11-15 Jul 2009, Xi'an, China. (Unpublished)

Yao, Y, Petty, David, Barrington, P., Yao, Jun and Mason, Peter (2006) Direct numerical simulation of jets in cross-flow. In: 13th Annual Conference of the CFD-Society-of-Canada; 31 Jul - 2 Aug 2005, St Johns, Canada. (International Journal of Computational Fluid Dynamics, no. 20 (5)) ISSN (print) 1061-8562

Yao, Y. and Maidi, M. (2011) Direct numerical simulation of single and multiple square jets in cross-flow. Journal of Fluids Engineering, 133(3), 031201. ISSN (print) 0098-2202

Yao, Y., Salin, A and Lo, S. (2011) Numerical analysis of wall properties in crossing-shock-qave/turbulent-boundary-layer interactions. In: 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition; 4 - 7 Jan 2011, Orlando, U.S.A..

Yao, Y. and Amos, I.G. (2010) The effect of variable gas property on axial turbine performance. International Journal of Engineering Systems Modelling and Simulations, 2(3), pp. 190-198. ISSN (print) 1755-9758

Yao, Yufeng (2009) Direct numerical simulation of multiple jets in cross-flow. In: The Second International Symposium on Physics of Fluids (ISPF2); 9-12 Jun 2008, Jiuzhaigou, China. (Unpublished)

Yao, Yufeng (2009) Direct simulation of flow interactions in multiple jets in cross-flow. Modern Physics Letters B, 23(3), pp. 249-252. ISSN (print) 0217-9849

Yao, Yufeng (2009) Effect of hole shape on blade cooling effectiveness. In: World Congress on Engineering 2009 (WCE 2009); 1-3 Jul 2009, London, UK. (Unpublished)

Yao, Yufeng (1996) High order resolution and parallel implementation on unstructured grids. (PhD thesis), University of Glasgow.

Yao, Yufeng, Salin, Andrea and Lo, Sing H. (2011) Numerical analysis of wall properties in crossing-shock-wave/turbulent-boundary-layer interactions. AIAA Journal, 2011(860), ISSN (print) 0001-1452 (Submitted)

Yao, Yufeng and Castagna, Jony (2009) Numerical study of laminar jet interacting with turbulent cross-flow. In: Sixth International Symposium On Turbulence, Heat and Mass Transfer; 14-18 Sep 2009, Rome, Italy.

Yao, Yufeng and Yao, Jun (2011) The effect of hole shape on blade cooling effectiveness. International Journal of Engineering Systems Modelling and Simulations, 2(4), pp. 242-248. ISSN (print) 1755-9758

Yin, Shuo, Wang, Xaio-fang, Xu, Bao-peng and Li, Wen-ya (2010) Examination on the calculation method for modeling the multi-particle impact process in cold spraying. Journal Of Thermal Spray Technology, 19(5), pp. 1032-1041. ISSN (print) 1059-9630

Yin, Shuo, Wang, Xiao-fang, Li, Wen-ya and Xu, Baopeng (2010) Numerical Study on the Effect of Substrate Angle on Particle Impact Velocity and Normal Velocity Component in Cold Gas Dynamic Spraying Based on CFD. Journal Of Thermal Spray Technology, 19(6), pp. 1155-1162. ISSN (print) 1059-9630

Yool, A., Lees, T.P. and Fried, A. (1998) Improvements to the methylene blue dye test for harmful clay in aggregates for concrete and mortar. Cement and Concrete Research, 28(10), pp. 1417-1428.

Yu, K., Yue, Z. and Wang, J. (2007) Parametric modelling and multidisciplinary design optimization of 3-D internally cooled turbine blades. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO); 18 - 20 Sep 2007, Belfast, Northern Ireland.

Z

Zhang, Jianping (2005) Numerical modelling of pool fires and flame spread. (PhD thesis), Kingston University.

Zhang, T, Evans, JRG and Bevis, MJ (1998) On the heat balance during double-gated, modulated-pressure injection moulding. International Journal of Heat and Mass Transfer, 41(6-7), pp. 963-974. ISSN (online) 0017-9310

Zhang, T, Gawne, DT and Bao, Y (1997) The influence of process parameters on the degradation of thermally sprayed polymer coatings. Surfaces and Coatings Technology, 96(2-3), pp. 337-344. ISSN (online) 0257-8972

Zhang, T., Evans, J.R.G. and Bevis, M. (1997) Analysis of open-ended injection molding. Advances in Polymer Technology, 16(2), pp. 105-115. ISSN (print) 0730-6679

Zhang, T. and Evans, J.R.G. (1990) Anomalies in the thermal expansion of ceramic injection moulding bodies. Journal of Materials Science Letters, 9(6), pp. 672-674. ISSN (print) 0261-8028

Zhang, T. and Evans, J.R.G. (1992) Calculation of temperature distributions during the solidification stage in ceramic injection molding. Journal of the American Ceramic Society, 75(8), pp. 2260-2267. ISSN (print) 0002-7820

Zhang, T. and Evans, J.R.G. (1993) Computation of volume flow in modulated pressure ceramic injection moulding. Ceramic International, 19(6), 367 - 373. ISSN (print) 0272-8842

Zhang, T., Gawne, D.T. and Liu, B. (2000) Computer modelling of the influence of process parameters on the heating and acceleration of particles during plasma spraying. Surface and Coatings Technology, 132(2-3), pp. 233-243. ISSN (print) 0257-8972

Zhang, T., Liu, B., Gawne, D.T. and Bao, Y. (2001) Computer simulation of shrouding on the profile of a plasma jet. In: International Thermal Spray Conference; 28-30 May 2001, Singapore, Singapore. (Proceedings of the International Thermal Spray Conference)

Zhang, T., Evans, J.R.G. and Bevis, M. (1996) Control of orientation in short fibre-reinforced metal matrix composites. International Journal of Powder Metallurgy, 32(4), pp. 331-339. ISSN (print) 0888-7462

Zhang, T., Blackburn, S. and Bridgwater, J. (1996) Debinding and sintering defects from particle orientation in ceramic injection moulding. Journal of Materials Science, 31(22), pp. 5891-5896. ISSN (print) 0022-2461

Zhang, T., Bao, Y., Gawne, D.T. and Mason, P.J. (2011) Effect of a moving flame on the temperature of polymer coatings and substrates. Progress in Organic Coatings, 70(1), pp. 45-51. ISSN (print) 0300-9440

Zhang, T., Evans, J.R.G. and Woodthorpe, J. (1995) Injection moulding of silicon carbide using an organic vehicle based on a preceramic polymer. Journal of the European Ceramic Society, 15(8), pp. 729-734. ISSN (print) 0955-2219

Zhang, T. and Evans, J.R.G. (1991) Mechanical properties of injection moulding suspensions as a function of ceramic volume fraction and temperature. Journal of the European Ceramic Society, 7(3), pp. 155-163. ISSN (print) 0955-2219

Zhang, T., Liu, B., Gawne, D.T. and Bao, Y. (2003) Model of thermal spraying using a Monte-Carlo approach. In: 2003 International Thermal Spray Conference; 5-8 May 2003, Orlando, Florida, USA. (Thermal Spray 2003 Advancing the Science and Applying the Technology) ISBN 0871707853

Zhang, T., Blackburn, S. and Bridgwater, J. (1997) Orientation of binders and particles during ceramic injection moulding. Journal of the European Ceramic Society, 17(1), pp. 101-108. ISSN (print) 0955-2219

Zhang, T. and Evans, J.R.G. (1993) Predicting the incidence of voids in injection molding of thick ceramic sections. Journal of the American Ceramic Society, 76(2), pp. 481-486. ISSN (print) 0002-7820

Zhang, T., Liu, B., Bao, Y. and Gawne, D.t. (2004) Process optimisation of plasma spraying using statistical modelling. In: International Thermal Spray Conference; 10-12 May 2004, Osaka, Japan. (Proceedings of the International Thermal Spray Conference)

Zhang, T. and Evans, J.R.G. (1993) Relaxation effects in large injection moulded ceramic bodies. Journal of the European Ceramic Society, 12(1), 51 - 59. ISSN (print) 0955-2219

Zhang, T., Evans, J.R.G. and Bevis, M. (1999) Relaxation patterns in powder injection mouldings made with repeated flow reversals. Journal of the European Ceramic Society, 19(4), pp. 411-417. ISSN (print) 0955-2219

Zhang, T., Bao, Y. and Gawne, D.T. (2000) Temperature profiles and thermal stress analysis of plasma sprayed glass-composite coatings. In: 1st International Thermal Spray Conference; 8-11 May 2000, Montreal, Quebec, Canada. (Proceedings of the 1st International Thermal Spray Conference)

Zhang, T., Evans, J.R.G. and Rees, D.W.A. (1992) The heating effect of electrical resistance strain gauges applied to low thermal conductivity materials. Strain, 28(3), 107 - 112.

Zhang, T. and Evans, J.R.G. (1991) The properties of a ceramic injection moulding suspensions based on a preceramic polymer. Journal of the European Ceramic Society, 7(6), pp. 405-412. ISSN (print) 0955-2219

Zhang, T., Blackburn, S. and Bridgwater, J. (1994) The properties of ceramic suspensions for injection moulding based on agar water solution binders. British Ceramic Transactions, 93(6), pp. 229-233. ISSN (print) 0967-9782

Zhang, T. and Evans, J.R.G. (1993) The solidification of large section in ceramic injection molding: I. Conventional molding. Journal of Materials Research, 8(1), pp. 187-194. ISSN (print) 0884-2914

Zhang, T. and Evans, J.R.G. (1993) The solidification of large section in ceramic injection molding: II Modulated Pressure Molding. Journal of Materials Research, 8(2), pp. 345-351. ISSN (print) 0884-2914

Zhang, T. and Evans, J.R.G. (1993) The use of a heated sprue in the injection moulding of large ceramic sections. British Ceramic Transactions, 92(4), 146 - 151. ISSN (print) 0967-9782

Zhang, Tao, Jiang, Zuozhao, Wu, Jianguang and Zhengang, Chen (1990) Influence of rheology behavior of ceramic mixes on injection molding of ceramic compacts. Journal of the American Ceramic Society, 73(7), 2171 - 2175. ISSN (print) 0002-7820

Zhang, Tao, Evans, J.R.D and Bevis, M. (1996) The control of fibre orientation in ceramic and metal composites by open-ended injection moulding. Composites Science and Technology, 56(8), pp. 921-928. ISSN (print) 0266-3538

Zhu, X, Zhang, T., Marchant, D. and Morris, V. (2011) The structure and properties of NiAl formed by SHS using induction heating. Materials Science and Engineering A, 528(3), pp. 1251-1260. ISSN (print) 0921-5093

Zhu, X., Zhang, T., Morris, V. and Marchant, D. (2010) Combustion synthesis of NiAl/Al2O3 composites by induction heating. Intermetallics, 18(6), pp. 1197-1204. ISSN (print) 0966-9795

Zhu, X., Zhang, T., Marchant, D. and Morris, V. (2010) Combustion synthesis of TiC-NiAl composite by induction heating. Journal of the European Ceramic Society, 30(13), pp. 2781-2790. ISSN (print) 0955-2219

Zhu, Xiaomeng (2010) Combustion synthesis of Ni, Al and NiAl based composites by induction heating. (PhD thesis), Kingston University.

Zoras, S., Davies, M. and Adjali, M.H. (2001) A novel tool for the prediction of earth-contact heat transfer: a multi-room simulation. Proceedings of the Institution of Mechanical Engineers. Part C: Journal of mechanical engineering science, 215(4), pp. 415-422. ISSN (online) 0954-4062

Zweiri, Y.H., Seneviratne, L.D and Althoefer, K. (2004) Identification methods for excavator arm parameters. In: SICE 2004 Annual Conference; 4-6 Aug 2004, Sapporo, Japan.

Zweiri, Y.H., Seneviratne, L.D. and Althoefer, K. (2002) Modelling and Control of Heavy Duty Vehicles for Excavation Tasks. In: IASTED International Conference on Control and Applications; 20-22 May 2002, Cancun, Mexico.

This list was generated on Tue Feb 14 04:10:29 2017 GMT.