Items where Faculty is "Faculty of Engineering (until 2011) > Applied Engineering Research Centre (AERC)"

Up a level
Export as [feed] Atom [feed] RSS
Group by: First Author/Editor | Item Type | Year | No Grouping
Jump to: A | C | D | F | G | H | K | L | M | O | S | U | W | X | Y | Z
Number of items at this level: 43.

A

Aluri, N.K., Pantangi, P.K.G., Muppala, S.P.R. and Dinkelacker, F. (2005) A numerical study promoting algebraic models for the Lewis number effect in atmospheric turbulent premixed Bunsen flames. Flow, Turbulence and Combustion, 75(1-4), pp. 149-172. ISSN (print) 1386-6184

Aluri, Naresh K., Muppala, S.P. Reddy and Dinkelacker, Friedrich (2006) Substantiating a fractal-based algebraic reaction closure of premixed turbulent combustion for high pressure and the Lewis number effects. Combustion and Flame, 145(4), pp. 663-674. ISSN (online) 0010-2180

C

Chalkley, A.M., Billett, E., Harrison, D. and Simpson, G. (2003) Development of a method for calculating the environmentally optimum lifespan of electrical household products. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of engineering manufacture, 217(11), pp. 1521-1532. ISSN (online) 0954-4054

D

Dembele, S., Zhang, J. and Wen, J.X. (2005) Assessments of spectral narrow band and weighted-sum-of-gray-gases models for computational fluid dynamics simulations of pool fires. Numerical Heat Transfer Part B, 48(3), pp. 257-276. ISSN (print) 1040-7790

Dembele, S. and Wen, J.X. (2003) Evaluation of fast correlated-k approach for radiation calculations in combustion systems. Numerical Heat Transfer Part B, 44(4), pp. 365-385. ISSN (print) 1040-7790

Dembele, S., Wen, Jennifer and Sacadura, J.-F. (2001) Experimental study of water sprays for the atttenuation of fire thermal radiation. Journal Of Heat Transfer, 123(3), pp. 534-543. ISSN (print) 0022-1481

Dembele, Siaka, Rosario, R.A.F. and Wen, J.X. (2007) Investigation of glazing behavior in a fire environment using a spectral discrete ordinates method for radiative heat transfer. Numerical Heat Transfer Part B, 52(6), pp. 489-506. ISSN (print) 1040-7790

F

Ferraris, S.A. and Wen, J.X. (2007) Large eddy simulation of a lifted turbulent jet flame. Combustion and Flame, 150(4), pp. 320-339. ISSN (print) 0010-2180

Ferraris, S.A., Wen, J.X. and Dembele, S. (2008) Large eddy simulation of the backdraft phenomenon. Fire Safety Journal, 43(3), pp. 205-225. ISSN (print) 0379-7112

G

Gawne, D.T., Zhang, T. and Liu, B. (2002) Computational analysis of the influence of a substrate, solid shield and gas shroud on the flow field of a plasma jet. Surface and Coatings Technology, 153(2-3), pp. 138-147. ISSN (print) 0257-8972

Ghasemnejad, H., Hadavinia, H. and Simpson, G. (2007) Crashworthiness optimization of crash box in automotive structure. Key Engineering Materials, 348-34, pp. 661-664. ISSN (print) 1013-9826

Gordnian, K., Hadavinia, H. and Karwatzki, J. (2006) Effect of transverse shear on deformation of thick laminated sandwich plates. Key Engineering Materials, 324-32, pp. 279-282. ISSN (print) 1013-9826

Gwane, D.T., Liu, B., Bao, Y. and Zhang, T. (2005) Modelling of plasma-particle two-phase flow using statistical techniques. Surface and Coatings Technology, 191(2-3), pp. 242-254. ISSN (print) 0257-8972

H

Hadavinia, H., Gordnian, K., Karwatzki, J. and Aboutorabi, A. (2006) Deriving shear correction factor for thick laminated plates using the energy equivalence method. Structural Durability & Health Monitoring, 2(4), pp. 197-206. ISSN (print) 1930-2983

Hay, G.I., Evans, P.S.A., Harrison, D.J., Southee, D., Simpson, G. and Harrey, P.M. (2005) Characterization of lithographically printed resistive strain gauges. IEEE Sensors Journal, 5(5), pp. 864-871. ISSN (print) 1530-437x

Hay, Gareth I., Southee, Darren J., Evans, Peter S.A., Harrison, David J., Simpson, George and Ramsey, Blue J. (2007) Examination of silver-graphite lithographically printed resistive strain sensors. Sensors and Actuators A Physical, 135(2), pp. 534-546. ISSN (print) 0924-4247

K

Kang, Y. and Wen, J.X. (2004) Large eddy simulation of a small pool fire. Combustion Science and Technology, 176(12), pp. 2193-2223. ISSN (print) 0010-2202

Karwatzki, J., Zhang, T., Bao, Y., Gawne, D.T. and Liu, B. (2006) Computer model to simulate the random behaviour of particles in a thermal-spray jet. Surface and Coatings Technology, 201(6), pp. 3552-3563. ISSN (print) 0257-8972

L

Liu, F. and Wen, J.X. (2002) The effect of turbulence modelling on the CFD simulation of buoyant diffusion flames. Fire Safety Journal, 37(2), pp. 125-150. ISSN (print) 0379-7112

M

Magda, S.I., Ferraris, S.A., Wen, J.X., Dembele, S. and Karwatzki, J.M. (2004) Large eddy simulation of a backdraft with watermist. Journal of Applied Fire Science, 13(3), pp. 213-229. ISSN (print) 1044-4300

Muppala, S. P. Reddy, Sannala, S. K. R., Aluri, N. K., Dinkelacker, F., Beyrau, F. and Liepertz, A. (2007) Detailed 2-D numerical simulations of rich premixed laminar methane flames for CO concentrations and temperature. Combustion Science and Technology, 179(9), pp. 1797-1822. ISSN (print) 0010-2202

Muppala, S.P.Reddy, Aluri, Naresh K., Dinkelacker, Friedrich and Leipertz, Alfred (2005) Development of an algebraic reaction rate closure for the numerical calculation of turbulent premixed methane, ethylene, and propane/air flames for pressures up to 1.0 MPa. Combustion and Flame, 140(4), pp. 257-266. ISSN (online) 0010-2180

O

Ordys, A.W., Grimble, M.J., Uduehi, D. and Majecki, P. (2007) Controller benchmarking procedures - model-based methods. In: Ordys, Andrzej W. , Uduehi, Damien and Johnson, Michael A., (eds.) Process Control Performance Assessment: From Theory to Implementation. London, UK : Springer. pp. 127-168. (Advances in Industrial Control) ISSN (print) 1430-9491 ISBN 1846286239

Ordys, Andrzej W. , Uduehi, Damien and Johnson, Michael A., eds. (2007) Process control performance assessment: from theory to implementation. London, UK : Springer. 325p. (Advances in Industrial Control) ISSN (online) 1430-9491 ISBN 1846286239

Ordys, Andrzej W., Tomizuka, Masayoshi and Grimble, Michael J. (2007) State-space dynamic performance preview-predictive controller. Journal Of Dynamic Systems, Measurement, And Control, 129(2), pp. 144-153. ISSN (print) 0022-0434

S

Sabir, H.M., ElHag, Y.B.M. and Benhadj-Djilali, R. (2008) Experimental study of capillary-assisted evaporators. Energy and Buildings, 40(3), pp. 399-407. ISSN (print) 0378-7788

Sandham, N.D., Yao, Y.F. and Lawal, A.A. (2003) Large-eddy simulation of transonic turbulent flow over a bump. International Journal of Heat and Fluid Flow, 24(4), pp. 584-595. ISSN (print) 0142-727X

Shawky, A.M., Ordys, A.W., Petropoulakis, L. and Grimble, M.J. (2007) Position control of flexible manipulator using non-linear H∞ with state-dependent Riccati equation. Journal Of Systems And Control Engineering - Part I, 221(3), pp. 475-486. ISSN (print) 0959-6518

Simpson, George, Fisher, Christine and Wright, David K. (2001) Modeling the interactions between a prosthetic socket, polyurethane liners and the residual limb in transtibial amputees using non-linear finite element analysis. Biomedical Sciences Instrumentation, 37, pp. 343-347. ISSN (print) 0067-8856

Sáez, Doris, Ordys, Andrzej and Grimble, Michael (2005) Design of a supervisory predictive controller and its application to thermal power plants. Optimal Control Applications and Methods, 26(4), pp. 169-198. ISSN (print) 0143-2087

U

Uduehi, D., Ordys, A.W., Xia, H., Bennauer, M., Zimmer, G. and Corsi, S. (2007) Controller benchmarking algorithms: some technical issues. In: Ordys, Andrzej W. , Uduehi, Damien and Johnson, Michael A., (eds.) Process Control Performance Assessment: From Theory to Implementation. London, UK : Springer. pp. 259-294. (Advances in Industrial Control) ISSN (print) 1430-9491 ISBN 1846286239

Uduehi, D., Ordys, A.W., Grimble, M.J., Majecki, P. and Xia, H. (2007) Controller benchmarking procedures - data-driven methods. In: Ordys, Andrzej W. , Uduehi, Damien and Johnson, Michael A., (eds.) Process Control Performance Assessment: From Theory to Implementation. London, UK : Springer. pp. 81-126. (Advances in Industrial Control) ISSN (print) 1430-9491 ISBN 1846286239

Uduehi, D., Xia, H., Boll, M., Nohr, M., Ordys, A.W. and Corsi, S. (2007) Divided wall distillation column simulation study. In: Ordys, Andrzej W. , Uduehi, Damien and Johnson, Michael A., (eds.) Process Control Performance Assessment: From Theory to Implementation. London, UK : Springer. pp. 169-197. (Advances in Industrial Control) ISSN (print) 1430-9491 ISBN 1846286239

Uduehi, D., Laing, D. and Ordys, A.W. (2007) Economic auditing of control systems. In: Ordys, Andrzej W. , Uduehi, Damien and Johnson, Michael A., (eds.) Process Control Performance Assessment: From Theory to Implementation. London, UK : Springer. pp. 41-80. (Advances in Industrial Control) ISSN (online) 1430-9491 ISBN 1846286239

W

Wen, J.X., Liu, F. and Lo, S. (2001) Performance comparison of a buoyancy-modified turbulence model with three LRN turbulence models for a square cavity. Numerical Heat Transfer Part B, 39(3), pp. 257-276. ISSN (print) 1040-7790

X

Xia, H., Majecki, P., Ordys, A. and Grimble, M. (2006) Performance assessment of MIMO systems based on I/O delay information. Journal of Process Control, 16(4), pp. 373-383. ISSN (online) 0959-1524

Xu, B.P., El Hima, L., Wen, J.X., Dembele, S., Tam, V.H.Y. and Donchev, T. (2008) Numerical study on the spontaneous ignition of pressurized hydrogen release through a tube into air. Journal of Loss Prevention in the Process Industries, 21(2), pp. 205-213. ISSN (print) 0950-4230

Y

Yao, Y., Krishnan, L., Sandham, N.D. and Roberts, G. (2007) The effect of Mach number on unstable disturbances in shock/boundary-layer interactions. Physics of Fluids, 19(5), ISSN (print) 1070-6631

Yao, Y.F., Thomas, T.G., Sandham, N.D. and Williams, J.J.R. (2001) Direct numerical simulation of turbulent flow over a rectangular trailing edge. Theoretical and Computational Fluid Dynamics, 14(5), pp. 337-358. ISSN (print) 0935-4964

Yao, Y.F. and Sandham, N.D. (2002) Direct numerical simulation of turbulent trailing-edge flow with base flow control. AIAA Journal, 40(9), pp. 1708-1716. ISSN (print) 0001-1452

Z

Zhang, T., Bao, Y. and Gawne, D.T. (2005) Non-steady state heating of substrate and coating during thermal-spray deposition. Surface and Coatings Technology, 194(1), pp. 82-90. ISSN (print) 0257-8972

Zhang, T., Bao, Y. and Gawne, D.T. (2003) Process model of plasma enamelling. Journal of the European Ceramic Society, 23(7), pp. 1019-1026. ISSN (print) 0955-2219

Zhang, T., Liu, B., Bao, Y. and Gawne, D.T. (2005) Statistical analysis of the motion and heating of particles in a plasma jet. Plasma Chemistry and Plasma Processing, 25(4), pp. 403-425. ISSN (print) 0272-4324

This list was generated on Tue Feb 14 04:25:38 2017 GMT.