Article

Abd Razak, Diyana Syafiqah, Mills, Grant and Roberts, Aeli (2020) A strategic approach to mitigating operational failure across transitions. Project Management Journal, 51(5), pp. 474-488. ISSN (print) 1938-9507

Ahmadi, Hamed, Liaghat, Gholamhossein and Charandabi, Sahand Chitsaz (2020) High velocity impact on composite sandwich panels with nano-reinforced syntactic foam core. Thin-Walled Structures, 148, p. 106599. ISSN (print) 0263-8231

Al-Sharman, Mohammad K., Zweiri, Yahya, Jaradat, Mohammad Abdel Kareem, Al-Husari, Raghad, Gan, Dongming and Seneviratne, Lakmal D. (2020) Deep-learning-based neural network training for state estimation enhancement : application to attitude estimation. IEEE Transactions on Instrumentation and Measurement, 69(1), pp. 24-34. ISSN (print) 0018-9456

Aluri, Naresh K. and Muppala, Siva PR (2020) RANS and LES of turbulent premixed flame dynamics for gas turbine combustion systems. Industrial Combustion Journal, p. 201618. ISSN (online) 2075-3071

Ariyachandra, M.R.M.F., Jayasena, H.S. and Perera, B.A.K.S (2020) Competencies expected from an information manager working in BIM based projects. International Journal of Construction Education and Research, ISSN (print) 1557-8771 (Epub Ahead of Print)

Ariyachandra, M.R.M.F. and Brilakis, Ioannis (2020) Detection of railway masts in airborne LiDAR data. Journal of Construction Engineering and Management, 146(9), ISSN (print) 0733-9364

Asare, Kofi A. B., Ruikar, Kirti D., Zanni, Mariangela and Soetanto, Robby (2020) BIM-based LCA and energy analysis for optimised sustainable building design in Ghana. SN Applied Sciences, 2(11), p. 1855. ISSN (print) 2523-3971

Aseperi, Adeniyi K., Busquets, Rosa, Hooda, Peter S., Cheung, Philip C.W. and Barker, James (2020) Behaviour of neonicotinoids in contrasting soils. Journal of Environmental Management, 276, p. 111329. ISSN (print) 0301-4797

Augousti, Andy T., Radosz, Andrzej, Gusin, Pawel and Kaczmarek, Aleksander (2020) The symmetry of the interior and exterior of Schwarzschild and Reissner–Nordstrom black holes : sphere vs. cylinder. Symmetry, 12(5), e859. ISSN (online) 2073-8994

Ayyad, Abdulla, Chehadeh, Mohamad, Awad, Mohammad I. and Zweiri, Yahya (2020) Real-time system identification using deep learning for linear processes with application to unmanned aerial vehicles. IEEE Access, 8, pp. 122539-122553. ISSN (online) 2169-3536

Azzam, Rana, Taha, Tarek, Huang, Shoudong and Zweiri, Yahya (2020) Feature-based visual simultaneous localization and mapping : a survey. SN Applied Sciences, 2(2), p. 224. ISSN (print) 2523-3963

Baghaei Naeini, Fariborz, Makris, Dimitrios, Gan, Dongming and Zweiri, Yahya (2020) Dynamic-vision-based force measurements using convolutional recurrent neural networks. Sensors, 20(16), p. 4469. ISSN (online) 1424-8220

Baghaei Naeini, Fariborz, Alali, Aamna, Al-Husari, Raghad, Rigi, Amin, AlSharman, Mohammad K., Makris, Dimitrios and Zweiri, Yahya (2020) A novel dynamic-vision-based approach for tactile sensing applications. IEEE Transactions on Instrumentation and Measurement, 69(5), pp. 1881-1893. ISSN (print) 0018-9456

Besseris, George J. (2020) Concurrent multiresponse multifactorial screening of an electrodialysis process of polluted wastewater using robust non-linear Taguchi profiling. Chemometrics and Intelligent Laboratory Systems, 200, p. 103997. ISSN (print) 0169-7439

Bhatia, D., Li, G., Lin, Y., Sun, P., Li, H. and Wang, J. (2020) Transition delay and drag reduction using biomimetically inspired surface waves. Journal of Applied Fluid Mechanics, 13(4), pp. 1207-1222. ISSN (print) 1735-3572

Brown, Douglas (2020) Book Review of 'Life courses of young convicts transported to Van Diemen's land' by Emma D. Watkins. Family & Community History, 23(2), pp. 151-153. ISSN (print) 1463-1180

Brown, Douglas H.L. (2020) Book Review of 'Writing the lives of the English poor, 1750s-1830s' by Steven King. Labour/Le Travail, 86, pp. 222-224. ISSN (print) 0700-3862

Bulat, M.P., Bulat, P.V., Denissenko, P.V., Esakov, I.I., Grachev, L.P., Lavrov, P.V., Volkov, K.N. and Volobuev, I.A. (2020) Plasma-assisted ignition and combustion of lean and rich air/fuel mixtures in low- and high-speed flows. Acta Astronautica, 176, pp. 700-709. ISSN (print) 0094-5765

Bulat, Pavel Viktorovich and Volkov, Konstantin Nikolaevich (2020) Simulation of incompressible flows in channels containing fluid and porous regions. International Journal of Industrial and Systems Engineering, 34(3), pp. 283-300. ISSN (print) 1748-5037

Carvalho, Fabio, Brown, Kerry A., Waller, Martyn P., Razafindratsima, Onja H. and Boom, Arnoud (2020) Changes in functional, phylogenetic and taxonomic diversities of lowland fens under different vegetation and disturbance levels. Plant Ecology, 221, pp. 441-457. ISSN (print) 1385-0237

Carvalho, Fabio, Brown, Kerry A, Gordon, Adam D, Yesuf, Gabriel U, Raherilalao, Marie Jeanne, Raselimanana, Achille P, Soarimalala, Voahangy and Goodman, Steven M (2020) Methods for prioritizing protected areas using individual and aggregate rankings. Environmental Conservation, 47(2), pp. 113-122. ISSN (print) 0376-8929

Collins, Rebecca M., Spake, Rebecca, Brown, Kerry A., Ogutu, Booker O., Smith, Dianna and Eigenbrod, Felix (2020) A systematic map of research exploring the effect of greenspace on mental health. Landscape and Urban Planning, 201, p. 103823. ISSN (print) 0169-2046

Deng, Jie, Pickles, Brian J., Smith, Stefan T. and Shao, Li (2020) Infrared radiative performance of urban trees : spatial distribution and interspecific comparison among ten species in the UK by in-situ spectroscopy. Building and Environment, 172, p. 106682. ISSN (print) 0360-1323

Dertinger, Samantha C., Gallup, Nicole, Tanikella, Nagendra G., Grasso, Marzio, Vahid, Samireh, Foot, Peter J.S. and Pearce, Joshua M. (2020) Technical pathways for distributed recycling of polymer composites for distributed manufacturing : windshield wiper blades. Resources, Conservation and Recycling, 157, p. 104810. ISSN (print) 0921-3449

Dombrovsky, Leonid A., Levashov, Vladimir Yu., Kryukov, Alexei P., Dembele, Siaka and Wen, Jennifer X. (2020) A comparative analysis of shielding of thermal radiation of fires using mist curtains containing droplets of pure water or sea water. International Journal of Thermal Sciences, 152, p. 106299. ISSN (print) 1290-0729

Domun, Nadiim, Paton, Keith R., Blackman, Bamber R. K., Kaboglu, Cihan, Vahid, Samireh, Zhang, Tao, Dear, John P., Kinloch, Anthony J. and Hadavinia, Homayoun (2020) On the extent of fracture toughness transfer from 1D/2D nanomodified epoxy matrices to glass fibre composites. Journal of Materials Science, 55(11), pp. 4717-4733. ISSN (print) 0022-2461

Duan, Ningmin, Shi, Zhenyu, Wang, Jilai, Wang, Guilong and Zhang, Xianzhi (2020) Strong and flexible carbon fiber fabric reinforced thermoplastic polyurethane composites for high‐performance EMI shielding applications. Macromolecular Materials and Engineering, 305(6), p. 1900829. ISSN (print) 1438-7492

Elsayed, Eman, AL-Dadah, Raya, Mahmoud, Saad, Anderson, Paul and Elsayed, Ahmed (2020) Experimental testing of aluminium fumarate MOF for adsorption desalination. Desalination, 475, p. 114170. ISSN (print) 0011-9164

Emelyanov, V.N., Teterina, I.V. and Volkov, K.N. (2020) Dynamics and combustion of single aluminium agglomerate in solid propellant environment. Acta Astronautica, 176, pp. 682-694. ISSN (print) 0094-5765

Eren, Baran, Sole, Christopher G., Lacasa, Jesús S., Grinter, David, Venturini, Federica, Held, Georg, Esconjauregui, Cruz S. and Weatherup, Robert S. (2020) Identifying the catalyst chemical state and adsorbed species during methanol conversion on copper using ambient pressure X-ray spectroscopies. Physical Chemistry Chemical Physics, 34(22), pp. 18815-18823. ISSN (print) 1463-9076

Etchart, Linda and Cerda, Leo (2020) Amazonians in New York : indigenous peoples and global governance. City, 24(1-2), pp. 5-21. ISSN (print) 1360-4813

Farzaneh, R, Dansoh, C, Augousti, A and Wang, J (2020) A review of UAE native seaweed as potential bio-refinery feedstock for jet fuel and high value chemicals. Advance in Environmental Waste Management & Recycling, 3(1), pp. 10-15. ISSN (online) 2641-1784

Hamilton, Clovia and Philbin, Simon (2020) Knowledge based view of university tech transfer : a systematic literature review and meta-analysis. Administrative Sciences, 10(3), p. 62. ISSN (print) 2076-3387

Hassanin, Hany, Alkendi, Yusra, Elsayed, Mahmoud, Essa, Khamis and Zweiri, Yahya (2020) Controlling the properties of additively manufactured cellular structures using machine learning approaches. Advanced Engineering Materials, 22(3), p. 1901338. ISSN (print) 1438-1656

Hassanpour Roudbeneh, Fatemeh, Liaghat, Gholamhossein, Sabouri, Hadi and Hadavinia, Homayoun (2020) High-velocity impact loading in honeycomb sandwich panels reinforced with polymer foam : a numerical approach study. Iranian Polymer Journal, 29(8), pp. 707-721. ISSN (print) 1026-1265

Honnur Vali, Mohamed Shaik, Gupta, Naren, Goh, Keng and Umar, Tariq (2020) Potential regions in the Persian Gulf to deploy offshore floating photovoltaic systems. Proceedings of the Institution of Civil Engineers - Energy, 173(3), pp. 94-100. ISSN (print) 1751-4223

Huang, Xiaoqian, Muthusamy, Rajkumar, Hassan, Eman, Niu, Zhenwei, Seneviratne, Lakmal, Gan, Dongming and Zweiri, Yahya (2020) Neuromorphic vision based contact-level classification in robotic grasping applications. Sensors, 20(17), p. 4724. ISSN (online) 1424-8220

Hunt, J.E. and Jarvis, I. (2020) The lifecycle of mid-ocean ridge seamounts and their prodigious flank collapses. Earth and Planetary Science Letters, 530, p. 115867. ISSN (print) 0012-821X

Juthapakdeeprasert, Jindaporn, Gavalda Diaz, Oriol, Lerdprom, Wirat, De Sousa Meneses, Domingos, Jayaseelan, Doni D. and Lee, William E (2020) Reactions and emissivity of cerium oxide with phosphate binder coating on basic refractory brick. International Journal of Applied Ceramic Technology, 17(2), pp. 668-676. ISSN (print) 1546-542X

Kabiri, Ali, Liaghat, Gholamhossein, Alavi, Fatemeh, Saidpour, Hossein, Hedayati, Seyyed Kaveh, Ansari, Mehdi and Chizari, Mahmoud (2020) Glass fiber/polypropylene composites with potential of bone fracture fixation plates : manufacturing process and mechanical characterization. Journal of Composite Materials, 54(30), pp. 4903-4919. ISSN (print) 0021-9983

Kattge, Jens, Bonisch, Gerhard, Diaz, Sandra, Lavorel, Sandra, Prentice, Ian C., Leadley, Paul, Tautenhahn, Susanne, Werner, Gijsbert, ..., Brown, Kerry, ..., Waller, Martyn, ... and Wirth, Christian (2020) TRY plant trait database : enhanced coverage and open access. Global Change Biology, 26(1), pp. 119-188. ISSN (print) 1354-1013

Khodadadi, Amin, Liaghat, Gholamhossein, Shahgholian-Ghahfarokhi, Davoud, Chizari, Mahmoud and Wang, Bin (2020) Numerical and experimental investigation of impact on bilayer aluminum-rubber composite plate. Thin-Walled Structures, 149, p. 106673. ISSN (print) 0263-8231

Li, Guangning, Bhatia, Dinesh and Wang, Jian (2020) Compressive properties of min-mod-type limiters in modelling shockwave-containing flows. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, p. 290. ISSN (print) 1678-5878

Li, Xin, Shi, Zhenyu, Duan, Ningmin, Cui, Peng, Zhang, Shuai and Zhang, Xianzhi (2020) Cutting performance investigation based on the variable friction model by considering sliding velocity and limiting stress. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 234(8), pp. 1113-1123. ISSN (print) 2041-2975

Lyu, Peng, Yao, Leijiang, Ma, Xiaofei, An, Gang, Bai, Guodong, Augousti, Andy T. and Tong, Xiaoyan (2020) Correlation between failure mechanism and rupture lifetime of 2D-C/SiC under stress oxidation condition based on acoustic emission pattern recognition. Journal of the European Ceramic Society, 40(15), pp. 5094-5102. ISSN (print) 0955-2219

Mansell, Paul, Philbin, Simon P., Broyd, Tim and Nicholson, Ian (2020) Assessing the impact of infrastructure projects on global sustainable development goals. Engineering Sustainability, 173(4), pp. 196-212. ISSN (print) 1478-4629

Mansell, Paul, Philbin, Simon P. and Konstantinou, Efrosyni (2020) Delivering UN Sustainable Development Goals’ impact on infrastructure projects : an empirical study of senior executives in the UK construction sector. Sustainability, 12(19), p. 7998. ISSN (online) 2071-1050

Mansell, Paul, Philbin, Simon P. and Broyd, Tim (2020) Development of a new business model to measure organizational and project-level SDG impact : case study of a water utility company. Sustainability, 12(16), p. 6413. ISSN (online) 2071-1050

Mansell, Paul and Philbin, Simon (2020) Measuring sustainable development goal targets on infrastructure projects. Journal of Modern Project Management, 8(1), pp. 42-63. ISSN (print) 2317-3963

Mansell, Paul, Philbin, Simon and Konstantinou, Efrosyni (2020) Redefining the use of sustainable development goals at the organisation and project levels : a survey of engineers. Administrative Sciences, 10(3), p. 55. ISSN (online) 2076-3387

Markert, Bernd, Abdallah, Naglaa, Aksoy, Ahmed, Ammari, Tarek, Arias, Andres, Azaizeh, Hassan, Badran, Adnan, Baltrėnaitė, Edita, Baydoun, Elias, Bernstein, Nirit, Canha, Nuno, Chudzinska, Ewa, Delakowitz, Bernd, Diatta, Jean, Djingova, Rumy, El-Sheik, Omer, Fargasova, Agata, Maria Figueiredo, Ana, Fränzle, Stefan, Frontesyeva, Marina, Ghafari, Zahra, Golan, Avi, Gorelova, Svetlana, Greger, Maria, Harmens, Harry, Hillman, John, Hooda, Peter, Jayasekera, Ranjit, Kidd, Petra, Kim, Eun-Shik, Loppi, Stefano, Lahiri, Susanta, Liu, Shirong, Lux, Alexander, Ma, Lena, Marcovecchio, Jorge, Meers, Erik, Mench, Michel, Michalke, Bernhard, Mowafaq, Mohammed, Namiesnik, Jacek, Nriagu, Jerome, Öztürk, Munir, Pacyna, Jozef, Pehkonen, Simo, Renella, Giancarlo, Rinklebe, Jörg, Robinson, Bret, Saiki, Mitiko, Szefer, Piotr, Tabors, Guntis, Tack, Filipe, Suchara, Ivan, Vangronsveld, Jaco, Vasconcellos, Marina, Wang, Meie, Waclawek, Maria, Wolterbeek, Bert, Wünschmann, Simone and Zechmeister, Harald (2020) Information gain in environmental monitoring through bioindi-cation and biomonitoring methods ("B & B technologies") and phytoremediation processes : with special reference to the Biological System of Chemical Elements (BSCE) under specific consideration of Lithium. Bioactive Compounds in Health and Disease, 3(11), pp. 214-250. ISSN (online) 2574-0334

McIlvenna, Kathleen, Brown, Douglas H.L. and Green, David R. (2020) 'The natural foundation of perfect efficiency' : medical services and the Victorian Post Office. Social History of Medicine, 33(2), pp. 539-558. ISSN (print) 0951-631X

Meissner, Wlodzimierz, Binkowski, Lukasz J., Barker, James, Hahn, Andreas and Trzeciak, Marta (2020) Relationship between blood lead levels and physiological stress in mute swans ('Cygnus olor') in municipal beaches of the southern Baltic. Science of the Total Environment, 710, p. 136292. ISSN (print) 0048-9697

Mohammed, Abdullah, Elshaer, Amr, Sareh, Pooya, Elsayed, Mahmoud and Hassanin, Hany (2020) Additive manufacturing technologies for drug delivery applications. International Journal of Pharmaceutics, 580, p. 119245. ISSN (print) 0378-5173

Mohd Nasir, Siti Diana, Xu, Weijie, Vital, Becky, Pantua, Conrad, Zhou, Bochao, Calautit, John and Hughes, Ben (2020) Urban road and pavement solar collector system for heat island mitigation : assessing the beneficial impact on outdoor temperature. IOP Conference Series : Earth and Environmental Science, 463, 012038. ISSN (print) 1755-1307

Mohiuddin, Abdullah, Zweiri, Yahya, Almadhoun, Randa, Taha, Tarek and Gan, Dongming (2020) Energy distribution in dual-UAV collaborative transportation through load sharing. Journal of Mechanisms and Robotics, JMR-19. ISSN (print) 1942-4302 (Epub Ahead of Print)

Mohiuddin, Abdullah, Tarek, Taha, Zweiri, Yahya and Gan, Dongming (2020) A survey of single and multi-UAV aerial manipulation. Unmanned Systems, 8(2), pp. 119-147. ISSN (print) 2301-3850

Muppala, Siva PR and Chandramohan, Balasubramanyam (2020) Classroom research in large cohorts : an innovative approach based on questionnaires and scholarship of teaching and learning on multiple-intelligences. Journal of Education and Learning, 9(3), pp. 106-122. ISSN (print) 1927-5250

Muppala, Siva PR and Vasudevan, Sooraj PM (2020) Numerical evaluation of lean premixed turbulent flame characteristics on co-axial cylinder configuration at gas turbine conditions. Industrial Combustion Journal, p. 201620. ISSN (online) 2075-3071

Muthusamy, Rajkumar, Huang, Xiaoqian, Zweiri, Yahya, Seneviratne, Lakmal and Gan, Dongming (2020) Neuromorphic event-based slip detection and suppression in robotic grasping and manipulation. IEEE Access, 8, pp. 153364-153384. ISSN (online) 2169-3536

Naoum, Shamil George, Harris, Jennifer, Rizzuto, Joseph and Egbu, Charles (2020) Gender in the construction industry : literature review and comparative survey of men’s and women’s perceptions in UK construction consultancies. Journal of Management in Engineering, 36(2), ISSN (print) 0742-597X

Ning, Fangwei, Shi, Yan, Cai, Maolin, Xu, Weiqing and Zhang, Xianzhi (2020) Manufacturing cost estimation based on a deep-learning method. Journal of Manufacturing Systems, 54, pp. 186-195. ISSN (print) 0278-6125

Ning, Fangwei, Shi, Yan, Cai, Maolin, Xu, Weiqing and Zhang, Xianzhi (2020) Manufacturing cost estimation based on the machining process and deep-learning method. Journal of Manufacturing Systems, 56, pp. 11-22. ISSN (print) 0278-6125

Panchal, Jignasha P., McNamara, Andrew M. and Goodey, Richard J. (2020) Sheet pile groups as an alternative foundation solution to cast in-situ concrete piles. International Journal of Physical Modelling in Geotechnics, 20(2), pp. 83-96. ISSN (print) 1346-213X

Papadopoulou, Theopisti (2020) Developing construction graduates fit for the 4th industrial revolution through fieldwork application of active learning. Higher Education Pedagogies, 5(1), pp. 182-199. ISSN (print) 2375-2696

Pearce, Martin A., Jarvis, Ian, Ball, Philip J. and Laurin, Jiri (2020) Palynology of the Cenomanian to lowermost Campanian (Upper Cretaceous) Chalk of the Trunch Borehole (Norfolk, UK) and a new dinoflagellate cyst bioevent stratigraphy for NW Europe. Review of Palaeobotany and Palynology, 278, p. 104188. ISSN (print) 0034-6667

Philbin, Simon P and Kaur, Rajneet (2020) Measuring PMO performance – application of the balanced scorecard in a collaborative research context. Journal of Modern Project Management, 7(4), pp. 254-275. ISSN (print) 2317-3963

Philbin, Simon P. (2020) Critical analysis and evaluation of the technology pathways for carbon capture and utilization. Clean Technologies, 2(4), pp. 492-512. ISSN (online) 2571-8797

Philbin, Simon P. and Kennedy, Donald (2020) Exploring the need for a new paradigm in engineering management and the decision-making process in technology-based organisations. Engineering Management in Production and Services, 12(4), pp. 7-21. ISSN (print) 2543-6597

Rastegari Mehr, Meisam, Keshavarzi, Behnam, Moore, Farid, Hooda, Peter S., Busquets, Rosa and Ghorbani, Zohreh (2020) Arsenic in the rock–soil–plant system and related health risk in a magmatic–metamorphic belt, West of Iran. Environmental Geochemistry and Health, ISSN (print) 0269-4042 (Epub Ahead of Print)

Rizzuto, Joseph P., Kamal, Mounir, Elsayad, Hanaa, Bashandy, Alaa, Etman, Zeinab, Aboel Roos, Mohamed N. and Shaaban, Ibrahim G. (2020) Effect of self-curing admixture on concrete properties in hot climate conditions. Construction and Building Materials, 261, p. 119933. ISSN (print) 0950-0618

Roudbeneh, Fatemeh Hassanpour, Liaghat, Gholamhossein, Sabouri, Hadi and Hadavinia, Homayoun (2020) Experimental investigation of quasistatic penetration tests on honeycomb sandwich panels filled with polymer foam. Mechanics of Advanced Materials and Structures, 27(21), pp. 1803-1815. ISSN (print) 1537-6494

Sainis, George, Haritos, George, Kriemadis, Thanos and Papasolomou, Ioanna (2020) TQM for Greek SMEs : an alternative in facing crisis conditions. Competitiveness Review, 30(1), pp. 41-58. ISSN (print) 1059-5422

Saleh, Zainab, Avital, Eldad J. and Korakianitis, Theodosios (2020) Effect of in-service burnout on the transonic tip leakage flows over flat tip model. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 234(5), pp. 655-669. ISSN (print) 0957-6509

Shahgholian-Ghahfarokhi, Davoud, Rahimi, Gholamhossein, Liaghat, Gholamhossein, Degenhardt, Richard and Franzoni, Felipe (2020) Buckling prediction of composite lattice sandwich cylinders (CLSC) through the vibration correlation technique (VCT) : numerical assessment with experimental and analytical verification. Composites Part B: Engineering, 199, p. 108252. ISSN (print) 1359-8368

Sofroniou, Anastasia, Premnath, Bhairavi and Poutos, Konstantinos (2020) Capturing student satisfaction : a case study on the National Student Survey results to identify the needs of students in STEM related courses for a better learning experience. Education Sciences, 10(12), e378. ISSN (online) 2227-7102

Struchkov, A.V., Kozelkov, A.S., Volkov, K.N., Kurkin, A.A., Zhuckov, R.N. and Sarazov, A.V. (2020) Numerical simulation of aerodynamic problems based on adaptive mesh refinement method. Acta Astronautica, 172, pp. 7-15. ISSN (print) 0094-5765

Taherzadeh-Fard, Alireza, Liaghat, Gholamhossein, Ahmadi, Hamed, Razmkhah, Omid, Chitsaz Charandabi, Sahand, Amin Zarezadeh-mehrizi, Mohammad and Khodadadi, Amin (2020) Experimental and numerical investigation of the impact response of elastomer layered fiber metal laminates (EFMLs). Composite Structures, 245, p. 112264. ISSN (print) 0263-8223

Tavri, Purva (2020) Barriers to reuse at organisational level. Circular Online,

Tavri, Purva (2020) Sector wide opinions on reuse. Circular Online,

Tian, Zhiyong, Zhang, Shicong, Deng, Jie and Dorota Hrynyszyn, Bozena (2020) Evaluation on overheating risk of a typical Norwegian residential building under future extreme weather conditions. Energies, 13(3), p. 658. ISSN (online) 1996-1073

Tian, Zhiyong, Deng, Jie, Zhang, Shicong, Yao, Runming and Shao, Li (2020) A quick measurement method for determining the incidence angle modifier of flat plate solar collectors using spectroradiometer. Solar Energy, 201, pp. 746-750. ISSN (print) 0038-092X

Umar, Tariq, Egbu, Charles, Ofori, George, Honnurvali, Mohamed Shaik, Saidani, Messaoud and Opoku, Alex (2020) Challenges towards renewable energy : an exploratory study from the Arabian Gulf region. Proceedings of the Institution of Civil Engineers - Energy, 173(2), pp. 68-80. ISSN (print) 1751-4223

Umar, Tariq (2020) Frameworks for reducing greenhouse gas (GHG) emissions from municipal solid waste in Oman. Management of Environmental Quality: An International Journal, 31(4), pp. 945-960. ISSN (print) 1477-7835

Umar, Tariq and Egbu, Charles (2020) Heat stress, a hidden cause of accidents in construction. Proceedings of the Institution of Civil Engineers - Municipal Engineer, 173(1), pp. 49-60. ISSN (print) 0965-0903

Umar, Tariq (2020) Key factors influencing the implementation of three-dimensional printing in construction. Proceedings of the Institution of Civil Engineers - Management, Procurement and Law, ISSN (print) 1751-4304 (Epub Ahead of Print)

Umar, Tariq (2020) Making future floating cities sustainable : a way forward. Proceedings of the Institution of Civil Engineers - Urban Design and Planning, 173(6), pp. 214-237. ISSN (print) 1755-0793

Umar, Tariq (2020) Safety climate factors in construction – a literature review. Policy and Practice in Health and Safety, 18(2), pp. 80-99. ISSN (print) 1477-3996

Umar, Tariq, Egbu, Charles, Ofori, George, Honnurvali, Mohamed Shaik, Saidani, Messaoud, Shibani, Abdussalam, Opoku, Alex, Gupta, Naren and Goh, Keng (2020) UAE’s commitment towards UN Sustainable Development Goals. Proceedings of the Institution of Civil Engineers - Engineering Sustainability, 173(7), pp. 325-343. ISSN (print) 1478-4629

Umar, Tariq, Egbu, Charles, Honnurvali, Mohamed Shaik, Saidani, Messaoud and Al-Mutairi, Matira (2020) An assessment of health profile and body pain among construction workers. Proceedings of the Institution of Civil Engineers - Municipal Engineer, 173(3), pp. 125-135. ISSN (print) 0965-0903

Umar, Tariq (2020) An integrated sustainability-management approach for universities. Proceedings of the Institution of Civil Engineers - Engineering Sustainability, 173(7), pp. 344-355. ISSN (print) 1478-4629

Umar, Tariq, Egbu, Charles and Saidani, Messaoud (2020) A modified method for Los Angeles Abrasion test. Iranian Journal of Science and Technology Transactions of Civil Engineering, 44(3), pp. 941-947. ISSN (print) 2228-6160

Umeokafor, Nnedinma, Evangelinos, Konstantinos and Windapo, Abimbola (2020) Strategies for improving complex construction health and safety regulatory environments. International Journal of Construction Management, ISSN (print) 1562-3599 (Epub Ahead of Print)

Umeokafor, Nnedinma (2020) Why copied or transposed safety, health and well-being legislation and standards are impracticable and irrelevant in developing economies. Policy and Practice in Health and Safety, 18(1), pp. 41-54. ISSN (print) 1477-3996

Vandanapu, Ramesh and Omer, Joshua (2020) Infrastructure damage due to dewatering without considering land use history. Geotechnical and Geological Engineering, ISSN (print) 0960-3182 (Epub Ahead of Print)

Walford, Nigel and Armitage, Richard (2020) Residential neighbourhood classification : an environmentally enhanced approach. Applied Geography, 121, p. 102219. ISSN (print) 0143-6228

Walford, Nigel Stephen (2020) Demographic and social context of deaths during the 1854 cholera outbreak in Soho, London : a reappraisal of Dr John Snow's investigation. Health & Place, 65, p. 102402. ISSN (print) 1353-8292

Zahedan, Nima, Ahmadi, Hamed and Liaghat, Gholamhossein (2020) Energy absorption study of a new reinforced top-hat section beam under flexural loading. International Journal of Crashworthiness, ISSN (print) 1358-8265

Zanni, Mariangela, Ruikar, Kirti and Soetanto, Robby (2020) Systematising multidisciplinary sustainable building design processes utilising BIM. Built Environment Project and Asset Management, 10(5), pp. 637-655. ISSN (print) 2044-124X

Zhang, Jingxiao, Ouyang, You, Philbin, Simon P., Zhao, Xiaojing, Ballesteros-Pérez, Pablo and Li, Hui (2020) Green dynamic capability of construction enterprises : role of the business model and green production. Corporate Social Responsibility and Environmental Management, 27(6), pp. 2920-2940. ISSN (print) 1535-3958

Zhang, Jingxiao, Cai, Wenyi, Philbin, Simon P., Li, Hui, Lu, Qing-Chang, Ballesteros-Pérez, Pablo and Yang, Guo-liang (2020) Measuring the capacity utilization of China’s transportation industry under environmental constraints. Transportation Research Part D Transport and Environment, 85, p. 102450. ISSN (print) 1361-9209

Zhang, Jingxiao, Ouyang, You, Ballasteros-Perez, Pablo, Li, Hui, Philbin, Simon, Li, Zhaoling and Skidmore, Martin (2020) Understanding the impact of environmental regulations on green technology innovation efficiency in the construction industry. Sustainable Cities and Society, 65, p. 102647. ISSN (print) 2210-6707

Zhou, Bochao, Pei, Jianzhong, Hughes, Ben Richard, Nasir, Diana SNM and Zhang, Jiupeng (2020) Analysis of mechanical properties for two different structures of photovoltaic pavement unit block. Construction and Building Materials, 239, p. 117864. ISSN (print) 0950-0618

Book

Moroz, Iryna [Compiler], Augousti, A.T. [Editor] and Malynych, S.Z [Editor] (2020) Physics : English-Ukrainian encyclopedic dictionary of general definitions, concepts and laws. Lviv, Ukraine : Lviv Polytechnic Publishing House. ISBN 9789669414854

Book Section

Allibone, Andrew, Vargas, Carlos, Mwandale, Etienne, Kwibisa, Justus, Jongens, Richard, Quick, Sarah, Komarnisky, Nathan, Fanning, Mark, Bird, Philip, MacKenzie, Doug, Turnbull, Rose and Holliday, Joel (2020) Orogenic gold deposits of the Kibali District, Neoarchean Moto Belt, Northeastern Democratic Republic of Congo. In: Sillitoe, Richard H. , Goldfarb, Richard J. , Robert, François and Simmons, Stuart F., (eds.) Geology of the world’s major gold deposits and provinces. Littleton, CO, U.S. : Society of Economic Geologists. pp. 185-201. 23 ISSN (print) 1547-3112 ISBN 9781629493121

Cramer, B.D. and Jarvis, I. (2020) Carbon isotope stratigraphy. In: Gradstein, Felix M. , Ogg, James G. , Schmitz, Mark D. and Ogg, Gabi M., (eds.) Geologic time scale 2020. Amsterdam, Netherlands : Elsevier. pp. 309-343. 1 ISBN 9780128243602

Fountas, N. A., Vaxevanidis, N. M., Stergiou, C. I. and Benhadj-Djilali, R. (2020) A multi-objective tool path optimization methodology for sculptured surfaces based on experimental data and heuristic search. In: Kumar, Kaushik , Zindani, Divya and Davim, J. Paulo, (eds.) Digital manufacturing and assembly systems in industry 4.0. Boca Raton, U.S. : CRC Press. pp. 101-140. (Science, Technology, and Management) ISBN 9781138612723

Gusin, Pawel, Augousti, Andy T. and Radosz, Andrzej (2020) BH M87 : Beyond the gates of hell. In: Buzea, Calin Gheorghe , Agop, Maricel and Butler, Leo, (eds.) Progress in relativity [working title]. London, U.K. : IntechOpen Limited. (Epub Ahead of Print)

Olatunji, Oluwole, Windapo, Abimbola and Umeokafor, Nnedinma (2020) Ad hoc and post hoc analysis of contractors' safety risks during procurement in Nigeria. In: Manu, Patrick , Emuze, Fidelis , Saurin, Tarcisio Abreu and Hadikusumo, Bonaventura H. W., (eds.) Construction health and safety in developing countries. Abingdon, U.K. : Routledge. pp. 128-139. (Spon Research) ISSN (print) 1940-7653 ISBN 9781138317079

Umeokafor, Nnedinma, Evangelinos, Konstantinos and Windapo, Abimbola (2020) Implications and opportunities in a complex construction health and safety regulatory environment. In: Manu, Patrick , Emuze, Fidelis , Saurin, Tarcisio Abreu and Hadikusumo,, Bonaventura H. W., (eds.) Construction health and safety in developing countries. Abingdon, U.K. : Routledge. pp. 15-28. (Spon Research) ISSN (print) 1940-7653 ISBN 9781138317079

Umeokafor, Nnedinma, Windapo, Abimbola and Olatunji, Oluwole (2020) Integrating health and safety into labour-only procurement system : opportunities, barriers and strategies. In: Manu, Patrick , Emuze, Fidelis , Saurin, Tarcisio Abreu and Hadikusumo, Bonaventura H. W., (eds.) Construction health and safety in developing countries. Abingdon, U.K. : Routledge. pp. 140-151. (Spon Research) ISSN (print) 1940-7653 ISBN 9781138317079

Windapo, Abimbola, Olatunji, Oluwole and Umeokafor, Nnedinma (2020) Contractors' compliance with occupational health and safety legislation in South Africa : the benefits of self-regulation. In: Manu, Patrick , Emuze, Fidelis , Saurin, Tarcisio Abreu and Hadikusumo, Bonaventura H. W., (eds.) Construction health and safety in developing countries. Abingdon, U.K. : Routledge. pp. 29-42. (Spon Research) ISSN (print) 1940-7653 ISBN 9781138317079

Conference or Workshop Item

Abbadi, Muram, Mussa, Ifrah, Lin, Yujing and Wang, Jian (2020) Preliminary analysis of ice accretion prediction on wind turbine blades. In: AIAA Scitech 2020 Forum; 06 - 10 Jan 2020, Orlando, U.S..

Alade, Kehinde, Windapo, Abimbola and Umeokafor, Nnedinma (2020) Sustainable contractor development : do CEOs/company leaders make a difference? In: CIB W099 & TG59 Annual Conference; 10 Sep 2020, Glasgow, U.K. (Held online). (Unpublished)

Capotondi, Marco, Turrisi, Giulio, Gaz, Claudio, Modugno, Valerio, Oriolo, Giuseppe and De Luca, Alessandro (2020) Learning feedback linearization control without torque measurements. In: 2nd Italian Conference on Robotics and Intelligent Machines (I-RIM); 10-12 Dec 2020, Rome, Italy (Held online).

Daniel, Doni [Presenter] (2020) Development of UHTCs for Hypersonic Applications. In: International Conference on Advanced Thermostructural Materials & Thermal Protection Systems : ADTHERM 20; 20 - 21 Jan 2020, Thiruvananthapuram, India. (Unpublished)

Eshraghi, Kourosh, Jiang, Pingfei, Suraci, Daniele and Atherton, Mark (2020) Preliminary study on end-effector compliance in automated fluid coupling for trains. In: The Thirteenth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2020) : Designing and Engineering of Smart Systems; .

Ferro, Marco, Gaz, Claudio and Vendittelli, Marilena (2020) A framework for sensorless identification of needle-tissue interaction forces in robot-assisted biopsies. In: 2020 IEEE International Conference on Robotics and Automation (ICRA), 2020 Workshop : Shared Autonomy : Learning and Control (SALC); 31 May - 31 Aug 2020, Paris, France (Held online). (Unpublished)

Gaz, Claudio, Cristofaro, Andrea and De Luca, Alessandro (2020) Detection and isolation of actuator faults and collisions for a flexible robot arm. In: 59th IEEE Conference on Decision and Control (CDC); 14 - 18 Dec 2020, Jeju Island, South Korea (Held online).

Haroglu, Hasan and Umeokafor, Ned (2020) What is happening in Quality Management in the UK construction industry? In: 36th Annual ARCOM Conference; 07 - 08 Sep 2020, Glasgow, U.K. (Held online). (Unpublished)

Jenabi, J., Khazaeinejad, P. and Nezamabadi, A. (2020) Size-dependent nonlinear analysis of composite laminated micro skew plates reinforced with functionally graded graphene sheets. In: UK Association for Computational Mechanics (UKACM) Conference 2020; 2020, Loughborough, U.K..

Le, B.T., Nguyen, N.T., Divall, S., Goodey, R. and Taylor, R.N. (2020) Modified gap method for prediction of TBM tunneling-induced soil settlement in sand. In: Tenth International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground; 29 Jun - 01 Jul 2022, Cambridge, U.K..

Mansell, Paul, Van Rooyen, Deney, Philbin, Simon and Sabini, Luca (2020) Infrastructure projects’ assessment through SDG targets : towards a comprehensive framework. In: EPOC 2020 – Engineering Project Organizations Conference; 21-23 Oct 2020, Held online. (Unpublished)

Mohd Nasir, Siti Diana Nabilah (2020) Road Pavement Solar Collector (RPSC) system for UHI mitigation : a numerical approach. In: Asphalt Innovation Symposium 2020; 10 Dec 2020, Held online. (Unpublished)

Muppala, SPR and Balasubramanyam, Chandramohan (2020) Developing teaching approaches to support students in higher education. In: Horizons in STEM Higher Education Conference : Making Connections, Innovating and Sharing Pedagogy; 01 - 02 Jul 2020, University of Nottingham (Held online). (Unpublished)

Muppala, Siva P. R., Vasudevan, Sooraj P. M. and (2020) Analytical comparison of lean premixed turbulent bunsen flames at high inlet temperatures and high operating pressures. In: International Conference on Physics and Chemistry of Combustion and Processes in Extreme Environments (ComPhysChem’20-21) And VI International Summer School “Modern Quantum Chemistry Methods in Applications”; .

Omer, Joshua (2020) Effects of rainfall on the stability of lateritic soils (Reinforced Red Coffee Soils – RCS). In: Pre-conference Workshop on "Laterites and Other Tropical Soils" - National Conference on "Geotechnics and Concrete Structures (GeoCon 2020); 25 Aug 2020, Thiruvananthapuram, India (Held online). (Unpublished)

Philbin, Simon (2020) Entrepreneurial skills for engineers : insights from the development of an online course. In: 2020 ASEM Virtual International Conference : leading organizations through uncertain times; 28-30 Oct 2020, Held online. (Proceedings of American Society for Engineering Management (ASEM) 2020, no. 057708)

Ritchie, Eric, Lalicata, Leonardo, Divall, Sam and Goodey, Richard (2020) Tests of varied sample preparation methods for centrifuge modelling. In: 4th European Conference on Physical Modelling in Geotechnics - ECPMG 2020; 06 - 08 Sep 2020, Lulea, Sweden (held online).

Sala, Pavan Kumar, Philbin, Simon P. and Barikzai, Safia (2020) Investigating the entrepreneurial pivoting experience of UK-based technology start-ups. In: ISPIM Connects Global 2020 : Celebrating the World of Innovation; 06-08 Dec 2020, Held online.

Sharif Moghadam, Sharon, Lin, Yujing and Wang, Jian (2020) Computational investigation on airframe noise generation around high-lift devices. In: AIAA AVIATION 2020 Forum; 15 - 19 Jun 2020, Online.

Torku, Alex, Bayrak, Turker, Ogunlana, Stephen, Chan, Albert Ping Chuen, Darko, Amos and Owusu-Manu, De-Graft (2020) Impact of construction work environment on quality of life of ageing workforce. In: Joint International Council for Research and Innovation in Building and Construction (CIB) W099 & TG59 International Web-Conference 2020 : Good Health, Wellbeing & Decent Work; 10 Sep 2020, Glasgow, U.K. (Held online).

Uddin, Md. Jashim, Hooda, Peter S., Mohiuddin, Abdus Salam Mohammad and Smith, Mike (2020) Geospatial technologies in precision farming : a case study. In: 16th International Conference on Intelligent Environments (IE2020); 20 - 23 Jul 2020, Madrid, Spain (Held online).

Umeokafor, N and Okoro, C (2020) Barriers to social support in the mental health and wellbeing of construction workers in emerging and developing economies : a systematic review. In: CIB W099 & TG59 Annual Conference; 10 Sep 2020, Glasgow, U.K. (Held online). (Unpublished)

Umeokafor, N and Windapo, A (2020) Improving the mental health and wellbeing of building and civil engineering workers : barriers to flexible working. In: CIB W099 & TG59 Annual Conference; 10 Sep 2020, Glasgow, U.K. (Held online). (Unpublished)

Zanni, Mariangela, Sharpe, Tim, Lammers, Philipp, Arnold, Leo and Pickard, James (2020) Towards a BIM-based decision support system for integrating whole life cost estimation into design development. In: ICCCBE/W78 Virtual Joint Conference : 18th International Conference on Computing in Civil and Building Engineering ​& 37th International CIB W78 Conference; 18 - 20 Aug 2020, Sao Paulo, Brazil (held online).

Monograph

Knight, Jason, Fels, Simon, Haritos, George and Carolus, Thomas (2020) Fluid-structure interaction of a spring-mounted symmetrical rigid wing for drag reduction of cars at higher wind velocities. (Technical Report) SAE. (Automotive Technical Papers)

Thesis

De Jager, Deon (2020) Real-time optimization of working memory in autonomous reasoning for high-level control of cognitive robots deployed in dynamic environments. (PhD thesis), Kingston University, .

Khan, Sidra Usman (2020) Soil nutrients mobilization as influenced by climate-change driven soil drying-rewetting or drying-flooding. (PhD thesis), Kingston University, .

Nazar Pour, Farhad (2020) Development of a numerical model for simulation of liquefied natural gas (LNG) pool spread and dispersion. (PhD thesis), Kingston University, .

Rahman, Hamid (2020) Experimental study and FEM of RC shear walls with internal FRP reinforcement. (PhD thesis), Kingston University, .