Items where Faculty is "Faculty of Science, Engineering and Computing > School of Engineering"

Up a level
Export as [feed] Atom [feed] RSS
Group by: First Author/Editor | Item Type | Year | No Grouping
Jump to: A | B | C | D | E | F | G | H | J | K | L | M | N | O | P | R | S | T | U | V | W
Number of items: 63.

A

Abd Razak, Diyana Syafiqah, Mills, Grant and Roberts, Aeli (2020) A strategic approach to mitigating operational failure across transitions. Project Management Journal, ISSN (print) 1938-9507 (Epub Ahead of Print)

Ahmadi, Hamed, Liaghat, Gholamhossein and Charandabi, Sahand Chitsaz (2020) High velocity impact on composite sandwich panels with nano-reinforced syntactic foam core. Thin-Walled Structures, 148, p. 106599. ISSN (print) 0263-8231

Al-Sharman, Mohammad, Murdoch, David, Cao, Dongpu, Lv, Chen, Zweiri, Yahya, Rayside, Derek and Melek, William (2020) A sensorless state estimation for a safety-oriented cyber-physical system in urban driving : deep learning approach. IEEE/CAA Journal of Automatica Sinica, ISSN (online) 2329-9266 (In Press)

Aluri, Naresh K. and Muppala, Siva PR (2020) RANS and LES of turbulent premixed flame dynamics for gas turbine combustion systems. Journal of the International Flame Research Foundation, p. 201618. ISSN (online) 2075-3071

Augousti, Andy T., Radosz, Andrzej, Gusin, Pawel and Kaczmarek, Aleksander (2020) The symmetry of the interior and exterior of Schwarzschild and Reissner–Nordstrom black holes : sphere vs. cylinder. Symmetry, 12(5), e859. ISSN (online) 2073-8994

Ayyad, Abdulla, Chehadeh, Mohamad, Awad, Mohammad I. and Zweiri, Yahya (2020) Real-time system identification using deep learning for linear processes with application to unmanned aerial vehicles. IEEE Access, 8, pp. 122539-122553. ISSN (online) 2169-3536

Azzam, Rana, Taha, Tarek, Huang, Shoudong and Zweiri, Yahya (2020) Feature-based visual simultaneous localization and mapping : a survey. SN Applied Sciences, 2(2), p. 224. ISSN (print) 2523-3963

B

Besseris, George J. (2020) Concurrent multiresponse multifactorial screening of an electrodialysis process of polluted wastewater using robust non-linear Taguchi profiling. Chemometrics and Intelligent Laboratory Systems, 200, p. 103997. ISSN (print) 0169-7439

Bhatia, D., Li, G., Lin, Y., Sun, P., Li, H. and Wang, J. (2020) Transition delay and drag reduction using biomimetically inspired surface waves. Journal of Applied Fluid Mechanics, 13(4), pp. 1207-1222. ISSN (print) 1735-3572

Bulat, M.P., Bulat, P.V., Denissenko, P.V., Esakov, I.I., Grachev, L.P., Lavrov, P.V., Volkov, K.N. and Volobuev, I.A. (2020) Plasma-assisted ignition and combustion of lean and rich air/fuel mixtures in low- and high-speed flows. Acta Astronautica, ISSN (print) 0094-5765 (Epub Ahead of Print)

Bulat, Pavel Viktorovich and Volkov, Konstantin Nikolaevich (2020) Simulation of incompressible flows in channels containing fluid and porous regions. International Journal of Industrial and Systems Engineering, 34(3), pp. 283-300. ISSN (print) 1748-5037

C

Carvalho, Fabio, Brown, Kerry A, Gordon, Adam D, Yesuf, Gabriel U, Raherilalao, Marie Jeanne, Raselimanana, Achille P, Soarimalala, Voahangy and Goodman, Steven M (2020) Methods for prioritizing protected areas using individual and aggregate rankings. Environmental Conservation, ISSN (print) 0376-8929 (Epub Ahead of Print)

Carvalho Gomes Da Silva, Fabio, Brown, Kerry A., Waller, Martyn P., Razafindratsima, Onja H. and Boom, Arnoud (2020) Changes in functional, phylogenetic and taxonomic diversities of lowland fens under different vegetation and disturbance levels. Plant Ecology, ISSN (print) 1385-0237 (Epub Ahead of Print)

Collins, Rebecca M., Spake, Rebecca, Brown, Kerry A., Ogutu, Booker O., Smith, Dianna and Eigenbrod, Felix (2020) A systematic map of research exploring the effect of greenspace on mental health. Landscape and Urban Planning, 201, p. 103823. ISSN (print) 0169-2046

D

Dertinger, Samantha C., Gallup, Nicole, Tanikella, Nagendra G., Grasso, Marzio, Vahid, Samireh, Foot, Peter J.S. and Pearce, Joshua M. (2020) Technical pathways for distributed recycling of polymer composites for distributed manufacturing : windshield wiper blades. Resources, Conservation and Recycling, 157, p. 104810. ISSN (print) 0921-3449

Dombrovsky, Leonid A., Levashov, Vladimir Yu., Kryukov, Alexei P., Dembele, Siaka and Wen, Jennifer X. (2020) A comparative analysis of shielding of thermal radiation of fires using mist curtains containing droplets of pure water or sea water. International Journal of Thermal Sciences, 152, p. 106299. ISSN (print) 1290-0729

Domun, Nadiim, Paton, Keith R., Blackman, Bamber R. K., Kaboglu, Cihan, Vahid, Samireh, Zhang, Tao, Dear, John P., Kinloch, Anthony J. and Hadavinia, Homayoun (2020) On the extent of fracture toughness transfer from 1D/2D nanomodified epoxy matrices to glass fibre composites. Journal of Materials Science, 55(11), pp. 4717-4733. ISSN (print) 0022-2461

Duan, Ningmin, Shi, Zhenyu, Wang, Jilai, Wang, Guilong and Zhang, Xianzhi (2020) Strong and flexible carbon fiber fabric reinforced thermoplastic polyurethane composites for high‐performance EMI shielding applications. Macromolecular Materials and Engineering, 305(6), p. 1900829. ISSN (print) 1438-7492

E

Elsayed, Eman, AL-Dadah, Raya, Mahmoud, Saad, Anderson, Paul and Elsayed, Ahmed (2020) Experimental testing of aluminium fumarate MOF for adsorption desalination. Desalination, 475, p. 114170. ISSN (print) 0011-9164

Emelyanov, V.N., Teterina, I.V. and Volkov, K.N. (2020) Dynamics and combustion of single aluminium agglomerate in solid propellant environment. Acta Astronautica, ISSN (print) 0094-5765 (Epub Ahead of Print)

Eren, Baran, Sole, Christopher G., Lacasa, Jesús S., Grinter, David, Venturini, Federica, Held, Georg, Esconjauregui, Cruz S. and Weatherup, Robert S. (2020) Identifying the catalyst chemical state and adsorbed species during methanol conversion on copper using ambient pressure X-ray spectroscopies. Physical Chemistry Chemical Physics, ISSN (print) 1463-9076 (Epub Ahead of Print)

Etchart, Linda and Cerda, Leo (2020) Amazonians in New York : indigenous peoples and global governance. City, ISSN (print) 1360-4813 (Epub Ahead of Print)

F

Farzaneh, R, Dansoh, C, Augousti, A and Wang, J (2020) A review of UAE native seaweed as potential bio-refinery feedstock for jet fuel and high value chemicals. Advance in Environmental Waste Management & Recycling, 3(1), pp. 10-15. ISSN (online) 2641-1784

G

Gusin, Pawel, Augousti, Andy T. and Radosz, Andrzej (2020) BH M87 : Beyond the gates of hell. In: Buzea, Calin Gheorghe , Agop, Maricel and Butler, Leo, (eds.) Progress in relativity [working title]. London, U.K. : IntechOpen Limited. (Epub Ahead of Print)

H

Hassanin, Hany, Alkendi, Yusra, Elsayed, Mahmoud, Essa, Khamis and Zweiri, Yahya (2020) Controlling the properties of additively manufactured cellular structures using machine learning approaches. Advanced Engineering Materials, 22(3), p. 1901338. ISSN (print) 1438-1656

Hassanpour Roudbeneh, Fatemeh, Liaghat, Gholamhossein, Sabouri, Hadi and Hadavinia, Homayoun (2020) High-velocity impact loading in honeycomb sandwich panels reinforced with polymer foam : a numerical approach study. Iranian Polymer Journal, 29(8), pp. 707-721. ISSN (print) 1026-1265

J

Jenabi, J., Khazaeinejad, P. and Nezamabadi, A. (2020) Size-dependent nonlinear analysis of composite laminated micro skew plates reinforced with functionally graded graphene sheets. In: UK Association for Computational Mechanics (UKACM) Conference 2020; 2020, Loughborough, U.K..

Juthapakdeeprasert, Jindaporn, Gavalda Diaz, Oriol, Lerdprom, Wirat, De Sousa Meneses, Domingos, Jayaseelan, Doni D. and Lee, William E (2020) Reactions and emissivity of cerium oxide with phosphate binder coating on basic refractory brick. International Journal of Applied Ceramic Technology, 17(2), pp. 668-676. ISSN (print) 1546-542X

K

Kabiri, Ali, Liaghat, Gholamhossein, Alavi, Fatemeh, Saidpour, Hossein, Hedayati, Seyyed Kaveh, Ansari, Mehdi and Chizari, Mahmoud (2020) Glass fiber/polypropylene composites with potential of bone fracture fixation plates : manufacturing process and mechanical characterization. Journal of Composite Materials, ISSN (print) 0021-9983 (Epub Ahead of Print)

Karkoodi, Sadaf, Liaghat, Gholamhossein, Hosseinabadi, Hamid Zarea and Ahmadi, Hamed (2020) Characterization of MDF reinforced with Al[sub]2O[sub]3 Nano particles considering physical, mechanical and quasi-static properties. Wood Material Science & Engineering, ISSN (print) 1748-0272

Kattge, Jens, Bonisch, Gerhard, Diaz, Sandra, Lavorel, Sandra, Prentice, Ian C., Leadley, Paul, Tautenhahn, Susanne, Werner, Gijsbert, ..., Brown, Kerry, ..., Waller, Martyn, ... and Wirth, Christian (2020) TRY plant trait database : enhanced coverage and open access. Global Change Biology, 26(1), pp. 119-188. ISSN (print) 1354-1013

Khodadadi, Amin, Liaghat, Gholamhossein, Shahgholian-Ghahfarokhi, Davoud, Chizari, Mahmoud and Wang, Bin (2020) Numerical and experimental investigation of impact on bilayer aluminum-rubber composite plate. Thin-Walled Structures, 149, p. 106673. ISSN (print) 0263-8231

Knight, Jason, Fels, Simon, Haritos, George and Carolus, Thomas (2020) Fluid-structure interaction of a spring-mounted symmetrical rigid wing for drag reduction of cars at higher wind velocities. (Technical Report) SAE. (Automotive Technical Papers)

L

Li, Guangning, Bhatia, Dinesh and Wang, Jian (2020) Compressive properties of min-mod-type limiter in modelling shockwave-containing flows. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, p. 290. ISSN (print) 1678-5878

Li, Xin, Shi, Zhenyu, Duan, Ningmin, Cui, Peng, Zhang, Shuai and Zhang, Xianzhi (2020) Cutting performance investigation based on the variable friction model by considering sliding velocity and limiting stress. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 234(8), pp. 1113-1123. ISSN (print) 2041-2975

Lin, Yujing, Wang, Jian and Savill, Mark (2020) Embedded large eddy simulation of transitional flow over NACA0012 aerofoil. Proceedings of the Institution of Mechanical Engineers, Part G, Journal of Aerospace Engineering, ISSN (print) 0954-4100 (Epub Ahead of Print)

Lyu, Peng, Yao, Leijiang, Ma, Xiaofei, An, Gang, Bai, Guodong, Augousti, Andy T. and Tong, Xiaoyan (2020) Correlation between failure mechanism and rupture lifetime of 2D-C/SiC under stress oxidation condition based on acoustic emission pattern recognition. Journal of the European Ceramic Society, ISSN (print) 0955-2219 (Epub Ahead of Print)

M

Meissner, Wlodzimierz, Binkowski, Lukasz J., Barker, James, Hahn, Andreas and Trzeciak, Marta (2020) Relationship between blood lead levels and physiological stress in mute swans ('Cygnus olor') in municipal beaches of the southern Baltic. Science of the Total Environment, 710, p. 136292. ISSN (print) 0048-9697

Mohammed, Abdullah, Elshaer, Amr, Sareh, Pooya, Elsayed, Mahmoud and Hassanin, Hany (2020) Additive manufacturing technologies for drug delivery applications. International Journal of Pharmaceutics, 580, p. 119245. ISSN (print) 0378-5173

Mohiuddin, Abdullah, Zweiri, Yahya, Almadhoun, Randa, Taha, Tarek and Gan, Dongming (2020) Energy distribution in dual-UAV collaborative transportation through load sharing. Journal of Mechanisms and Robotics, JMR-19. ISSN (print) 1942-4302 (Epub Ahead of Print)

Mohiuddin, Abdullah, Tarek, Taha, Zweiri, Yahya and Gan, Dongming (2020) A survey of single and multi-UAV aerial manipulation. Unmanned Systems, 8(2), pp. 119-147. ISSN (print) 2301-3850

Muppala, Siva PR and Chandramohan, Balasubramanyam (2020) Classroom research in large cohorts : an innovative approach based on questionnaires and scholarship of teaching and learning on multiple-intelligences. Journal of Education and Learning, 9(3), pp. 106-122. ISSN (print) 1927-5250

N

Najafi, Milad, Ahmadi, Hamed and Liaghat, Gholamhossein (2020) Experimental investigation on energy absorption of auxetic structures. Materials Today : Proceedings, ISSN (online) 2214-7853 (Epub Ahead of Print)

Ning, Fangwei, Shi, Yan, Cai, Maolin, Xu, Weiqing and Zhang, Xianzhi (2020) Manufacturing cost estimation based on a deep-learning method. Journal of Manufacturing Systems, 54, pp. 186-195. ISSN (print) 0278-6125

Ning, Fangwei, Shi, Yan, Cai, Maolin, Xu, Weiqing and Zhang, Xianzhi (2020) Manufacturing cost estimation based on the machining process and deep-learning method. Journal of Manufacturing Systems, 56, pp. 11-22. ISSN (print) 0278-6125

O

Olatunji, Oluwole, Windapo, Abimbola and Umeokafor, Nnedinma (2020) Ad hoc and post hoc analysis of contractors' safety risks during procurement in Nigeria. In: Manu, Patrick , Emuze, Fidelis , Saurin, Tarcisio Abreu and Hadikusumo, Bonaventura H. W., (eds.) Construction health and safety in developing countries. Abingdon, U.K. : Routledge. pp. 128-139. (Spon Research) ISSN (print) 1940-7653 ISBN 9781138317079

P

Pearce, Martin A., Jarvis, Ian, Ball, Philip J. and Laurin, Jiri (2020) Palynology of the Cenomanian to lowermost Campanian (Upper Cretaceous) Chalk of the Trunch Borehole (Norfolk, UK) and a new dinoflagellate cyst bioevent stratigraphy for NW Europe. Review of Palaeobotany and Palynology, 278, p. 104188. ISSN (print) 0034-6667

R

Rastegari Mehr, Meisam, Keshavarzi, Behnam, Moore, Farid, Hooda, Peter S., Busquets, Rosa and Ghorbani, Zohreh (2020) Arsenic in the rock–soil–plant system and related health risk in a magmatic–metamorphic belt, West of Iran. Environmental Geochemistry and Health, ISSN (print) 0269-4042 (Epub Ahead of Print)

S

Sainis, George, Haritos, George, Kriemadis, Thanos and Papasolomou, Ioanna (2020) TQM for Greek SMEs : an alternative in facing crisis conditions. Competitiveness Review, 30(1), pp. 41-58. ISSN (print) 1059-5422

Saleh, Zainab, Avital, Eldad J. and Korakianitis, Theodosios (2020) Effect of in-service burnout on the transonic tip leakage 1 flows over flat tip model. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 234(5), pp. 655-669. ISSN (print) 0957-6509

Shahgholian-Ghahfarokhi, Davoud, Rahimi, Gholamhossein, Liaghat, Gholamhossein, Degenhardt, Richard and Franzoni, Felipe (2020) Buckling prediction of composite lattice sandwich cylinders (CLSC) through the vibration correlation technique (VCT) : numerical assessment with experimental and analytical verification. Composites Part B: Engineering, ISSN (print) 1359-8368 (Epub Ahead of Print)

Struchkov, A.V., Kozelkov, A.S., Volkov, K.N., Kurkin, A.A., Zhuckov, R.N. and Sarazov, A.V. (2020) Numerical simulation of aerodynamic problems based on adaptive mesh refinement method. Acta Astronautica, 172, pp. 7-15. ISSN (print) 0094-5765

T

Taherzadeh-Fard, Alireza, Liaghat, Gholamhossein, Ahmadi, Hamed, Razmkhah, Omid, Chitsaz Charandabi, Sahand, Amin Zarezadeh-mehrizi, Mohammad and Khodadadi, Amin (2020) Experimental and numerical investigation of the impact response of elastomer layered fiber metal laminates (EFMLs). Composite Structures, 245, p. 112264. ISSN (print) 0263-8223

U

Umeokafor, Nnedinma, Windapo, Abimbola and Olatunji, Oluwole (2020) Briefing : a conceptual framework for integrating health, safety and wellbeing into labour-only procurement. Proceedings of the Institution of Civil Engineers - Management, Procurement and Law, ISSN (print) 1751-4304 (Epub Ahead of Print)

Umeokafor, Nnedinma, Evangelinos, Konstantinos and Windapo, Abimbola (2020) Implications and opportunities in a complex construction health and safety regulatory environment. In: Manu, Patrick , Emuze, Fidelis , Saurin, Tarcisio Abreu and Hadikusumo,, Bonaventura H. W., (eds.) Construction health and safety in developing countries. Abingdon, U.K. : Routledge. pp. 15-28. (Spon Research) ISSN (print) 1940-7653 ISBN 9781138317079

Umeokafor, Nnedinma, Windapo, Abimbola and Olatunji, Oluwole (2020) Integrating health and safety into labour-only procurement system : opportunities, barriers and strategies. In: Manu, Patrick , Emuze, Fidelis , Saurin, Tarcisio Abreu and Hadikusumo, Bonaventura H. W., (eds.) Construction health and safety in developing countries. Abingdon, U.K. : Routledge. pp. 140-151. (Spon Research) ISSN (print) 1940-7653 ISBN 9781138317079

Umeokafor, Nnedinma, Evangelinos, Konstantinos and Windapo, Abimbola (2020) Strategies for improving complex construction health and safety regulatory environments. International Journal of Construction Management, ISSN (print) 1562-3599 (Epub Ahead of Print)

Umeokafor, Nnedinma (2020) Why copied or transposed safety, health and well-being legislation and standards are impracticable and irrelevant in developing economies. Policy and Practice in Health and Safety, 18(1), pp. 41-54. ISSN (print) 1477-3996

V

Vandanapu, Ramesh and Omer, Joshua (2020) Infrastructure damage due to dewatering without considering land use history. Geotechnical and Geological Engineering, ISSN (print) 0960-3182 (Epub Ahead of Print)

Voigt, Silke, Püttmann, Tobias, Mutterlose, Jörg, Bornemann, André, Jarvis, Ian, Pearce, Martin and Walaszczyk, Irek (2020) Reassessment of the Salzgitter-Salder section as a potential stratotype for the Turonian–Coniacian boundary : stable carbon isotopes and cyclostratigraphy constrained by calcareous nannofossils and palynology. Newsletters on Stratigraphy, ISSN (print) 0078-0421 (In Press)

W

Walford, Nigel and Armitage, Richard (2020) Residential neighbourhood classification : an environmentally enhanced approach. Applied Geography, 121, p. 102219. ISSN (print) 0143-6228

Walford, Nigel Stephen (2020) Demographic and social context of deaths during the 1854 cholera outbreak in Soho, London : a reappraisal of Dr John Snow's investigation. Health & Place, ISSN (print) 1353-8292 (In Press)

Windapo, Abimbola, Olatunji, Oluwole and Umeokafor, Nnedinma (2020) Contractors' compliance with occupational health and safety legislation in South Africa : the benefits of self-regulation. In: Manu, Patrick , Emuze, Fidelis , Saurin, Tarcisio Abreu and Hadikusumo, Bonaventura H. W., (eds.) Construction health and safety in developing countries. Abingdon, U.K. : Routledge. pp. 29-42. (Spon Research) ISSN (print) 1940-7653 ISBN 9781138317079

This list was generated on Sun Aug 9 04:12:16 2020 BST.