Items where Research Area is "Research Areas > Mechanical, aeronautical and manufacturing engineering"
Number of items: 45. AAkbari, Sadaf, Suarez Bolivar, Vanessa and Khazaeinejad, Payam (2022) A finite element study of geometrical design of bone tissue scaffolds. In: The 2022 Annual Conference of the UK Association for Computational Mechanics; 20-22 Apr 2022, Nottingham, U.K.. (Unpublished) Arunkumar, T., Pavanan, Velmurugan, Murugesan, Vijay Anand, Mohanavel, V. and Ramachandran, Karthikeyan (2022) Influence of nanoparticles reinforcements on aluminium 6061 alloys fabricated via novel ultrasonic aided rheo-squeeze casting method. Metals and Materials International, 28, pp. 145-154. ISSN (print) 1598-9623 Asemani, Seyedeh Samaneh, Liaghat, Gholamhossein, Ahmadi, Hamed, Anani, Yavar, Charandabi, Sahand Chitsaz and Khodadadi, Amin (2022) Analysis of ballistic impact performance and shear effect on elastomeric and thermoset composites. International Journal of Applied Mechanics, 14(02), p. 2250013. ISSN (print) 1758-8251 BBenedetto, Andrea, Al-Qadi, Imad L., Alani, Amir M., Ciampoli, Luca Bianchini, Loizos, Andreas and Tosti, Fabio (2022) Systematic use of transport infrastructure non-destructive assessment and remote sensing. In: 11th International Conference on the Bearing Capacity of Roads, Railways and Airfields (BCRRA 2022); 28 - 30 Jun 2022, Trondheim, Norway. Bodanyuk, Daniel, Emelyanov, Vladislav, Pustovalov, Alexander and Volkov, Konstantin (2022) Simulation of supersonic gas-particle flows expanding from the nozzle into rarefied atmosphere. Acta Astronautica, ISSN (print) 0094-5765 (Epub Ahead of Print) Bulat, P. V., Volkov, K. N., Grachev, L. P., Esakov, I. I. and Lavrov, P. B. (2022) Influence of the pressure and composition of the fuel mixture on its ignition by a subcritical streamer discharge. Journal of Engineering Physics and Thermophysics, 95(4), pp. 931-938. ISSN (print) 1062-0125 Bulat, P.V., Volkov, K.N., Melnikova, A.I. and Renev, M.E. (2022) Development of mathematical model and numerical simulation of plasma ignition of flammable mixture with microwave subcritical streamer discharge. Acta Astronautica, ISSN (print) 0094-5765 (Epub Ahead of Print) Bulat, P.V., Volkov, K.V., Melnikova, A.I., Renev, M.E. and (2022) Numerical model of a pulsed subcritical streamer microwave discharge for problems of plasma ignition of fuel mixtures in the gas phase. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 22(4), pp. 792-803. ISSN (print) 22261494 Bulat, Pavel, Esakov, Igor, Ravaev, Alexander and Volkov, Konstantin (2022) Electrodynamic model of combustion chamber with initiated subcritical streamer discharge. IEEE Transactions on Plasma Science, 50(6), pp. 1681-1688. ISSN (print) 0093-3813 Bulat, Pavel, Chernyshov, Pavel, Esakov, Igor, Grachev, Lev, Lavrov, Pavel, Melnikova, Anzhelika, Volkov, Konstantin and Volobuev, Igor (2022) Multi-point ignition of air/fuel mixture by the initiated subcritical streamer discharge. Acta Astronautica, 194, pp. 504-513. ISSN (print) 0094-5765 Bulat, Pavel, Komar, Katerina, Prodan, Nickolay and Volkov, Konstantin (2022) Oscillatory and transient flow modes in block nozzle arrangements with a base region. Acta Astronautica, 194, pp. 532-543. ISSN (print) 0094-5765 CCarraro, Michael, De Vanna, Francesco, Zweiri, Feras, Benini, Ernesto, Heidari, Ali and Hadavinia, Homayoun (2022) CFD modeling of wind turbine blades with eroded leading edge. Fluids, 7(9), p. 302. ISSN (online) 2311-5521 Chakraborty, Moupali, Ozioko, Oliver and Dahiya, Ravinder (2022) Flexible interfacing circuits for wearable sensors and wireless communication. In: Islam, Tarikul , Mukhopadhyay, Subhas Chandra and George, Boby, (eds.) Systems for printed flexible sensors : design and implementation. Bristol, U.K. : IOP Publishing Ltd. pp. 1-19. (IOP Series in Sensors and Sensor Systems) ISBN 9780750339339 Ciampoli, L. Bianchini, Gagliardi, V., Benedetto, A., Alani, A. M. and Tosti, F. (2022) InSAR analysis of C-band data for transport infrastructure monitoring. In: 11th International Conference on the Bearing Capacity of Roads, Railways and Airfields (BCRRA 2022); 28 - 30 Jun 2022, Trondheim, Norway. DDashtkar, Arash (2022) Development of nanoengineered coatings for leading edge protection of wind turbine blades. (PhD thesis), Kingston University, . Dashtkar, Arash, Johansen, Nicolai Frost-Jensen, Mishnaevsky, Jr, Leon, Williams, Neil A, Hasan, Shadi W, Wadi, Vijay S, Silvello, Alessio and Hadavinia, Homayoun (2022) Graphene/sol–gel modified polyurethane coating for wind turbine blade leading edge protection : properties and performance. Polymers and Polymer Composites, 30, ISSN (print) 0967-3911 Dobrov, Yury, Gimadiev, Vladislav, Karpenko, Anton and Volkov, Konstantin (2022) Numerical simulation of hypersonic flow with non-equilibrium chemical reactions around sphere. Acta Astronautica, 194, pp. 468-479. ISSN (print) 0094-5765 Doudaran, Milad Oloumi, Ahmadi, Hamed and Liaghat, GholamHossein (2022) Crushing performance of auxetic tubes under quasi-static and impact loading. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(6), p. 230. ISSN (print) 1678-5878 Duan, Ningmin, Shi, Zhenyu, Wang, Zhaohui, Zou, Bin, Zhang, Chengpeng, Wang, Jilai, Xi, Jianren, Zhang, Xiaoshuai, Zhang, Xianzhi and Wang, Guilong (2022) Mechanically robust Ti₃C₂Tₓ MXene/carbon fiber fabric/thermoplastic polyurethane composite for efficient electromagnetic interference shielding applications. Materials & Design, 214, p. 110382. ISSN (print) 0261-3069 EEshraghi, Kourosh, Jiang, Pingfei, Suraci, Daniele and Atherton, Mark (2022) Preliminary study of end-effector compliance for reducing insertion force in automated fluid coupling for trains. Journal of Integrated Design and Process Science, 24(3-4), pp. 139-161. ISSN (print) 1092-0617 FFaraz, Moslem Rezaei, Ahmadi, Hamed, Liaghat, Gholamhossein, Vahid, Samireh, Razmkhah, Omid and Tarafdar, Amirreza (2022) Energy absorption assessment of bio-mimicked hybrid Al/PP sandwich tube : experimental and numerical investigation. Thin-Walled Structures, 181, p. 110116. ISSN (print) 0263-8231 GGao, Jie, Hu, Zhuohuan, Yang, Qiguo, Liang, Xing and Wu, Hongwei (2022) Fluid flow and heat transfer in microchannel heat sinks : modelling review and recent progress. Thermal Science and Engineering Progress, 29, p. 101203. ISSN (online) 2451-9049 Gaz, Claudio, Cristofaro, Andrea, Palumbo, Pasquale and De Luca, Alessandro (2022) A nonlinear observer for a flexible robot arm and its use in fault and collision detection. In: 61st IEEE Conference on Decision and Control; 06-09 Dec 2022, Cancún, Mexico. HHan, Ji and Jiang, Pingfei (2022) Using taxonomy for supporting sustainable product design concept analysis. In: NordDesign 2022; 16-19 Aug 2022, Copenhagen, Denmark (Held online). Hosseini, Ensieh S., Chakraborty, Moupali, Roe, Joshua, Petillot, Yvan and Dahiya, Ravinder S. (2022) Porous elastomer based wide range flexible pressure sensor for autonomous underwater vehicles. IEEE Sensors Journal, 22(10), pp. 9914-9921. ISSN (print) 1530-437X KKarpenko, A G, Tolstoguzov, S S and Volkov, K N (2022) Chemical kinetics in a five-component air behind shock waves. Journal of Physics : Conference Series, 2154, 012008. ISSN (print) 1742-6588 Kazemipour, Amirhossein, Khatib, Maram, Al Khudir, Khaled, Gaz, Claudio and De Luca, Alessandro (2022) Kinematic control of redundant robots with online handling of variable generalized hard constraints. IEEE Robotics and Automation Letters, 7(4), pp. 9279-9286. ISSN (online) 2377-3766 Kazemipour, Amirhossein, Khatib, Maram, Al Khudir, Khaled, Gaz, Claudio Roberto and De Luca, Alessandro (2022) Kinematic control of redundant robots with online handling of variable generalized hard constraints. In: 2022 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2022) : Embodied AI for a Symbiotic Society; 23–27 Oct 2022, Kyoto, Japan. (In Press) LLin, Xiaodan, Wang, Qiao, Wu, Yingchun, Yao, Longchao, Xue, Zhiliang and Wu, Xuecheng (2022) 3D visualization of droplet splash dynamics with high-speed digital holography. Experiments in Fluids, 63(5), ISSN (print) 0723-4864 Liu, Fengyuan, Deswal, Sweety, Christou, Adamos, Shojaei Baghini, Mahdieh, Chirila, Radu, Shakthivel, Dhayalan, Chakraborty, Moupali and Dahiya, Ravinder (2022) Printed synaptic transistor–based electronic skin for robots to feel and learn. Science Robotics, 7(67), ISSN (online) 2470-9476 MMuazu, Sani, Mirzaii, Hossein, Augousti, Andreas and Benhadj-Djilali, Redha (2022) Mechanical Biological Treatment Facility: Energy Recovery Assessment. In: Sayigh, A. A. M., (ed.) Sustainable Energy Development and Innovation. Springer. pp. 465-472. ISBN 9783030762209 Muppala, Siva (2022) Numerical comparison of premixed turbulent combustion models for ethylene/air mixtures up to 1 MPa. In: 16th International Combustion Symposium (INCOS) 2022; 8-10 Sep 2022, Aydin, Turkey. (Unpublished) Muppala, Siva PR (2022) Modelling of turbulent hydrogen-blended premixed flames using algebraic flame surface wrinkling closure for the Lewis numbers and mean local burning velocity. Alexandria Engineering Journal, 61(12), pp. 9485-9494. ISSN (print) 1110-0168 NNajafi, Milad, Ahmadi, Hamed and Liaghat, GholamHossein (2022) Investigation on the flexural properties of sandwich beams with auxetic core. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, p. 61. ISSN (print) 1678-5878 SSimpson, Charles, Shaw, Peter and Claus, Malcolm (2022) Metamorphic parachutes for planetary entry : a feasibility study. Journal of the British Interplanetary Society, 75(2), pp. 56-67. ISSN (print) 0007-084X TTaherzadeh-Fard, Alireza, Khodadadi, Amin, Liaghat, Gholamhossein, Yao, Xue-Feng and Mehrizi, Mohammad Amin Zarezadeh (2022) Mechanical properties and energy absorption capacity of chopped fiber reinforced natural rubber. Composites Part C: Open Access, 7, p. 100237. ISSN (online) 2666-6820 Tarafdar, Amirreza, Razmkhah, Omid, Ahmadi, Hamed, Liaghat, Gholamhossein, Chitsaz Charandabi, Sahand and Rezaei Faraz, Moslem (2022) Effect of layering layout on the energy absorbance of bamboo-inspired tubular composites. Journal of Reinforced Plastics and Composites, 41(15-16), pp. 602-623. ISSN (print) 0731-6844 Turrisi, Giulio, Capotondi, Marco, Gaz, Claudio, Modugno, Valerio, Oriolo, Giuseppe and De Luca, Alessandro (2022) On-line learning for planning and control of underactuated robots with uncertain dynamics. IEEE Robotics and Automation Letters, 7(1), pp. 358-365. ISSN (online) 2377-3766 UUkairo, Okorie (2022) Advancing CFD fire modelling in mechanically ventilated nuclear facilities. (PhD thesis), Kingston University, . VVasudevan, Sooraj P.M., Muppala, Siva, Madhov Rao, Vendra C., Heidari, Ali and Dembele, Siaka (2022) RANS studies of minimum ignition energy of stoichiometric laminar methane/air fuel mixtures. In: 16th International Combustion Symposium (INCOS) 2022; 8-10 Sep 2022, Aydin, Turkey. (Unpublished) Volkov, K. N., Emel’yanov, V. N., Karpenko, A. G. and Tolstoguzov, S. S. (2022) Mathematical simulation of the supersonic gas flow over a wedge with an attached shock wave and high-temperature effects. Journal of Engineering Physics and Thermophysics, 95(3), pp. 742-751. ISSN (print) 1062-0125 ZZahedan, Nima, Ahmadi, Hamed and Liaghat, GholamHossein (2022) Experimental and numerical investigation on the multi-optimization of reinforcing the side members of the vehicle structure. Archives of Civil and Mechanical Engineering, 22(1), p. 25. ISSN (print) 1644-9665 Zarezadeh‐mehrizi, Mohammad Amin, Liaghat, Gholamhossein, Ahmadi, Hamed, Taherzadeh‐Fard, Alireza and Khodadadi, Amin (2022) Numerical and experimental investigation of fiber metal laminates with elastomeric layers under low‐velocity impact. Polymer Composites, 43(4), pp. 1936-1947. ISSN (print) 0272-8397 Zou, Lilong, Tosti, Fabio and Alani, Amir M. (2022) Nondestructive inspection of tree trunks using a dual-polarized ground-penetrating radar system. IEEE Transactions on Geoscience and Remote Sensing, 60, p. 5917108. ISSN (print) 0196-2892 Zuccarini, Carmine, Ramachandran, Karthikeyan, Russo, Stefano, Jayakody, Yasith C. and Jayaseelan, Doni Daniel (2022) Mathematical modeling and simulation of porosity on thermomechanical properties of UHTCs under hypersonic conditions. International Journal of Ceramic Engineering and Science, ISSN (online) 2578-3270 (Epub Ahead of Print) |