Items where Research Area is "Research Areas > Mechanical, aeronautical and manufacturing engineering"

Up a level
Export as [feed] Atom [feed] RSS
Group by: First Author/Editor | Item Type | Year
Number of items: 54.


Abdullahi, Bala, Elsayed, Ahmed, Al-Dadah, Raya, Mahmoud, Sa'ad, Mahrous, Abdel Fateh, Muhammad, Nura Mu'az and Abbakar, Saidu Bello (2018) Experimental and numerical investigation of thermosyphon heat pipe performance at various inclination angles. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 44(1), pp. 85-98. ISSN (online) 2289-7879

Al-Hashimi, Nihad, Begg, Nazish, Alany, Raid G., Hassanin, Hany and Elshaer, Amr (2018) Oral modified release multiple-unit particulate systems : compressed pellets, microparticles and nanoparticles. Pharmaceutics, 10(4), p. 176. ISSN (print) 1999-4923

Al-Sharman, Mohammad K., Emran, Bara J., Jaradat, Mohammad A., Najjaran, Homayoun, Al-Husari, Raghad and Zweiri, Yahya (2018) Precision landing using an adaptive fuzzy multi-sensor data fusion architecture. Applied Soft Computing, 69, pp. 149-164. ISSN (print) 1568-4946

Arahchige, Buddhi and Perinpanayagam, Suresh (2018) Uncertainty quantification in aircraft gas turbine engines. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 232(9), pp. 1628-1638. ISSN (print) 0954-4100

Awad, Mohammad I., Gan, Dongming, Hussain, Irfan, Az-Zu'bi, Ali, Stefanini, Cesare, Khalaf, Kinda, Zweiri, Yahya, Dias, Jorge and Seneviratne, Lakmal D. (2018) Design of a novel passive Binary-Controlled Variable Stiffness Joint (BpVSJ) towards passive haptic interface application. IEEE Access, 6, pp. 63045-63057. ISSN (online) 2169-3536

Besseris, George J. (2018) Taguchi-generalized regression neural network micro-screening for physical and sensory characteristics of bread. Heliyon, 4(3), e00551. ISSN (online) 2405-8440

Bulat, M.P., Bulat, P.V., Denissenko, P.V., Esakov, I.I., Grachev, L.P., Volkov, K.N. and Volobuev, I.A. (2018) Ignition of lean and stoichiometric air–propane mixture with a subcritical microwave streamer discharge. Acta Astronautica, 150, pp. 153-161. ISSN (print) 0094-5765

Bulat, P.V., Minin, O.P. and Volkov, K.N. (2018) Numerical simulation of optical breakdown in a liquid droplet induced by a laser pulse. Acta Astronautica, 150, pp. 162-171. ISSN (print) 0094-5765

Bulat, Pavel V., Mitchell, Samuel and Volkov, Konstantin N. (2018) Aerodynamic characteristics of an aerofoil in wide range of angles of attack. Journal of Engineering and Applied Sciences, 13(8 SI), pp. 6451-6461. ISSN (print) 1816-949X

Bulat, Pavel V. and Volkov, Konstantin N. (2018) Fluid/solid coupled heat transfer analysis of a free rotating disc. Archives of Thermodynamics, 39(3), pp. 169-192. ISSN (online) 2083-6023

De Iorio, Antonio, Grasso, Marzio, Penta, Francesco, Pucillo, Giovanni Pio, Rossi, Stefano and Testa, Mario (2018) On the ballast–sleeper interaction in the longitudinal and lateral directions. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 232(2), pp. 620-631. ISSN (print) 0954-4097

Dombrovsky, Leonid A., Dembele, Siaka, Wen, Jennifer X. and Sikic, Ivan (2018) Two-step method for radiative transfer calculations in a developing pool fire at the initial stage of its suppression by a water spray. International Journal of Heat and Mass Transfer, 127(B), pp. 717-726. ISSN (print) 0017-9310

Dombrovsky, Leonid A., Dembele, Siaka and Wen, Jennifer X. (2018) An infrared scattering by evaporating droplets at the initial stage of a pool fire suppression by water sprays. Infrared Physics & Technology, 91, pp. 55-62. ISSN (print) 1350-4495

Emelyanov, V.N., Teterina, I.V., Volkov, K.N. and Yakovchuk, M.S. (2018) Aero-optical effects in free and wall-bounded turbulent compressible flows. Acta Astronautica, 150, pp. 144-152. ISSN (print) 0094-5765

Essa, Khamis, Jamshidi, Parastoo, Zou, Ji, Attallah, Moataz M. and Hassanin, Hany (2018) Porosity control in 316L stainless steel using cold and hot isostatic pressing. Materials & Design, 138, pp. 21-29. ISSN (print) 0264-1275

Galatas, Athanasios, Hassanin, Hany, Zweiri, Yahya and Seneviratne, Lakmal (2018) Additive manufactured sandwich composite/ABS parts for unmanned aerial vehicle applications. Polymers, 10(11), p. 1262. ISSN (online) 2073-4360

Ghalami-Choobar, Mehran, Liaghat, Gholamhossein, Sadighi, Mojtaba and Ahmadi, Hamed (2018) Eccentric low-velocity impact on fiber-metal laminates under in-plane loading using unified zigzag theory. Composite Structures, 201, pp. 315-325. ISSN (print) 0263-8223

Ghalami-Choobar, Mehran, Liaghat, Gholamhossein, Sadighi, Mojtaba, Razmkhah, Hamed Ahmadia Omid and Aboutorabi, Akbar (2018) Static analysis of highly anisotropic laminated beam using unified zig-zag theory subjected to mechanical and thermal loading. International Journal of Mechanical Sciences, 141, pp. 491-501. ISSN (print) 0020-7403

Grasso, Marzio, Azzouz, Lyes, Ruiz-Hincapie, Paula, Zarrelli, Mauro and Ren, Guogang (2018) Effect of temperature on the mechanical properties of 3D-printed PLA tensile specimens. Rapid Prototyping Journal, 24(8), pp. 1337-1346. ISSN (print) 1355-2546

Grasso, Marzio, Xu, Yigeng, Russo, Roberto and Rosiello, Vincenzo (2018) Mixed mode fatigue crack propagation behaviour of aluminium F357 alloy. Engineering Failure Analysis, 90, pp. 463-475. ISSN (print) 1350-6307

Hassanin, Hany, Ahmed El-Sayed, Mahmoud, Elshaer, Amr, Essa, Khamis and Jiang, Kyle (2018) Microfabrication of net shape zirconia/alumina nanocomposite micro parts. Nanomaterials, 8(8), p. 593. ISSN (online) 2079-4991

Hassanin, Hany, Finet, Laurane, Cox, Sophie C., Jamshidi, Parastoo, Grover, Liam M., Shepherd, Duncan E.T., Addison, Owen and Attallah, Moataz M. (2018) Tailoring selective laser melting process for titanium drug-delivering implants with releasing micro-channels. Additive Manufacturing, 20, pp. 144-155. ISSN (print) 2214-7810

Ismail, Mohd Azmi and Wang, Jian (2018) Effect of nozzle rotation angles and sizes on thermal characteristic of swirl anti-icing. Journal of Mechanical Science and Technology, 32(9), pp. 4485-4493. ISSN (print) 1738-494X

Javadinejad, Mahdi, Mashayekhi, Mohammad, Karevan, Mehdi and Hadavinia, Homayoun (2018) Using the equivalent fiber approach in two-scale modeling of the elastic behavior of carbon nanotube/epoxy nanocomposite. Nanomaterials, 8(9), p. 696. ISSN (online) 2079-4991

Junaid, Ali, Sanchez, Alejandro, Bosch, Javier, Vitzilaios, Nikolaos and Zweiri, Yahya (2018) Design and implementation of a dual-axis tilting quadcopter. Robotics, 7(4), p. 65. ISSN (online) 2218-6581

Kamliya Jawahar, Hasan, Lin, Yujing and Savill, Mark (2018) Large eddy simulation of airfoil self-noise using OpenFOAM. Aircraft Engineering and Aerospace Technology, 90(1), pp. 126-133. ISSN (print) 1748-8842

Khodadadi, A, Liaghat, GH, Sabet, AR, Hadavinia, H, Aboutorabi, A, Razmkhah, O, Akbari, M and Tahmasebi, M (2018) Experimental and numerical analysis of penetration into Kevlar fabric impregnated with shear thickening fluid. Journal of Thermoplastic Composite Materials, 31(3), pp. 392-407. ISSN (print) 0892-7057

Khodadadi Azadboni, Reza, Heidari, Ali and Wen, Jennifer X. (2018) A computational fluid dynamic investigation of inhomogeneous hydrogen flame acceleration and transition to detonation. Flow, Turbulence and Combustion, 101(4), pp. 1009-1021. ISSN (print) 1386-6184

Klippstein, Helge, Hassanin, Hany, Sanchez, Alejandro Diaz de Cerio, Zweiri, Yahya and Senevirante, Lakmal (2018) Additive manufacturing of porous structures for unmanned aerial vehicles applications. Advanced Engineering Materials, 20(9), p. 1800290. ISSN (print) 1438-1656

Klippstein, Helge, Sanchez, Alejandro Diaz De Cerio, Hassanin, Hany, Zweiri, Yahya and Seneviratne, Lakmal (2018) Fused deposition modelling for unmanned aerial vehicles : a review. Advanced Engineering Materials, 20(2), p. 1700552. ISSN (print) 1438-1656

Kozelkov, A.S., Lashkin, S.V., Efremov, V.R., Volkov, K.N., Tsibereva, Yu. A. and Tarasova, N.V. (2018) An implicit algorithm of solving Navier–Stokes equations to simulate flows in anisotropic porous media. Computers & Fluids, 160, pp. 164-174. ISSN (print) 0045-7930

Lerdprom, W., Ayan, B., Grasso, S., Zapata-Solvas, Eugenio, Daniel, Doni, Reece, M.J. and Lee, W.E. (2018) Impact of spark plasma sintering (SPS) on mullite formation in porcelains. Journal of the American Ceramic Society, 101(2), pp. 525-535. ISSN (print) 0002-7820

Lyras, Konstantinos, Dembele, Siaka, Vyazmina, Elena, Jallais, Simon and Wen, Jennifer (2018) Numerical simulation of flash-boiling through sharp-edged orifices. International Journal of Computational Methods and Experimental Measurements, 6(1), pp. 176-185. ISSN (print) 2046-0546

Lyras, Konstantinos, Dembele, Siaka, Schmidt, David P. and Wen, Jennifer (2018) Numerical simulation of subcooled and superheated jets under thermodynamic non-equilibrium. International Journal of Multiphase Flow, 102, pp. 16-28. ISSN (print) 0301-9322

Matsika, Emmanuel, O'Neill, Conor, Grasso, Marzio and De Iorio, Antonio (2018) Selection and ranking of the main beam geometry of a freight wagon for lightweighting. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 232(2), pp. 495-513. ISSN (print) 0954-4097

Patra, Niranjan, Al Nasiri, Nasrin, Jayaseelan, Daniel D. and Lee, William E. (2018) Thermal properties of C [sub]f[sub] /HfC and C [sub]f[sub] /HfC-SiC composites prepared by precursor infiltration and pyrolysis. Journal of the European Ceramic Society, 38(5), pp. 2297-2303. ISSN (print) 0955-2219

Roudbeneh, Fatemeh Hassanpour, Liaghat, Gholamhossein, Sabouri, Hadi and Hadavinia, Homayoun (2018) Experimental investigation of quasistatic penetration tests on honeycomb sandwich panels filled with polymer foam. Mechanics of Advanced Materials and Structures, ISSN (print) 1537-6494 (Epub Ahead of Print)

Torabmostaedi, Hosein and Zhang, Tao (2018) Numerical simulation of TiO[sub]2 nanoparticle synthesis by flame spray pyrolysis. Powder Technology, 329, pp. 426-433. ISSN (print) 0032-5910

Vichare, Parag, Zhang, Xianzhi, Dhokia, Vimal, Cheung, Wai M, Xiao, Wenlei and Zheng, Lianyu (2018) Computer numerical control machine tool information reusability within virtual machining systems. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(4), pp. 593-604. ISSN (print) 0954-4054

Vienescu, D.N., Wang, J., Le-Gresley, A. and Nixon, J.D. (2018) A life cycle assessment of options for producing synthetic fuel via pyrolysis. Bioresource Technology, 249, pp. 626-634. ISSN (print) 0960-8524

Wang, Kehao, Venetsanos, Demetrios, Wang, Jian and Pierscionek, Barbara K. (2018) Combined use of parallel-plate compression and finite element modeling to analyze the mechanical properties of intact porcine lens. Journal of Mechanics in Medicine and Biology, 18(7), p. 1840013. ISSN (print) 0219-5194

Wang, Qing, Hou, Renluan, Li, Jiangxiong, Ke, Yinglin, Maropoulos, Paul George and Zhang, Xianzhi (2018) Positioning variation modeling for aircraft panels assembly based on elastic deformation theory. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(14), pp. 2592-2604. ISSN (print) 0954-4054

Wei, Hong-Qiu, Chen, Ye, Zhang, Tao, Liu, Liwu, Qiao, Jinliang, Liu, Yanju and Leng, Jinsong (2018) Thermal, mechanical, and shape-memory properties of nanorubber-toughened, epoxy-based shape-memory nanocomposites. Journal of Applied Polymer Science, 135(6), p. 45780. ISSN (print) 0021-8995

Zotti, Aldobenedetto, Zuppolini, Simona, Tabi, Tamas, Grasso, Marzio, Ren, Gougang, Borriello, Anna and Zarrelli, Mauro (2018) Effects of 1D and 2D nanofillers in basalt/poly(lactic acid) composites for additive manufacturing. Composites Part B: Engineering, 153, pp. 364-375. ISSN (print) 1359-8368

Book Section

Ahmed, Asmau M, Duran, Olga, Zweiri, Yahya and Smith, Mike (2018) Quantitative analysis of petroleum hydrocarbon contaminated soils using spectroscopy, spectral unmixing and deep neural networks. In: Bruzzone, Lorenzo and Bovolo, Francesca, (eds.) Proceedings of SPIE : Image and Signal Processing for Remote Sensing XXIV. Washington, U.S. : SPIE. 10789 ISSN (print) 0277-786X ISBN 9781510621619

Muppala, Siva and Madhav Rao, Vendra C. (2018) Numerical implementation and validation of turbulent premixed combustion model for lean mixtures. In: Mebel, A. and Azyazov, V., (eds.) MATEC Web of Conferences: International Conference on Combustion Physics and Chemistry (ComPhysChem'18). EDP Sciences. pp. 00004. 209 ISSN (online) 2261-236X

Conference or Workshop Item

Bin Safwan, Shanna, Alkhoori, Fatima, Zweiri, Yahya and Sahinkaya, M. Necip (2018) Implementation of a novel optimal PID methods in UAV Applications. In: 2018 3rd International Conference on Advanced Robotics and Mechatronics (ICARM); 18 - 20 July 2018, Singapore.

Dombrovskiy, Leonid, Dembele, Siaka, Wen, Jennifer and Sikic, Ivan (2018) Suppression of pool fires by water sprays : the effect of light scattering by evaporating droplets. In: Eurotherm Seminar No. 110 Computational Thermal Regulation in Participating Media VI; 11 - 13 Apr 2018, Cascais, Portugal. (Unpublished)

Dombrovsky, Leonid, Dembele, Siaka, Wen, Jennifer X. and Sikic, Ivan (2018) Two-step iterative method for radiative transfer calculations in axisymmetric flames containing absorbing and scattering particles. In: 16th International Heat Transfer Conference; 10 - 15 Aug 2018, Beijing, China. (Unpublished)

Effendy, Marwan, Yao, Yufeng, Yao, Jun and Marchant, Denis R. (2018) Pin-fin shape and orientation effects on wall heat transfer predictions of gas turbine blade. In: The 5th International Conference on Engineering, Technology and Industrial Application; 12 - 13 Dec 2018, Surakarta, Indonesia.

Sagias, V.D., Giannakopoulos, K.I. and Stergiou, C. (2018) Mechanical properties of 3D printed polymer specimens. In: 1st International Conference of the Greek Society of Experimental Mechanics of Materials; 10-12 May 2018, Athens, Greece.

Shea, A.D., Elsayed, A., Allison, J. and Kelly, N.J. (2018) Modelling and evaluation of fabric integrated thermal storage for low-energy dwellings. In: 9th International Conference on Sustainable Built Environment 2018 (ICSBE); 13 - 15 Dec 2018, Kandy, Sri Lanka. (Unpublished)


Domun, Nadiim (2018) Improving ballistic impact performance of fibre reinforced polymer composite materials using nano-modified polymer matrix. (PhD thesis), Kingston University, .

Trunins, Jevgenijs (2018) Experimental and mathematical investigation of the chaotic dripping mode. (PhD thesis), Kingston University, .

This list was generated on Fri Dec 4 04:16:20 2020 GMT.