2014

Adnan, A., Cazan, A., Safa, M., Lung, A.W.M and Muppala, S. (2014) The application of theory of constraints in manufacturing outsourcing: a case study. International Journal of Enhanced Research in Science Technology & Engineering, 3(4), pp. 134-138. ISSN (online) 2319-7463

Ahmadi, H., Liaghat, G.H., Shokreih, M. M., Aboutorabi, A., Hadavinia, H. and Ordys, A. (2014) Compressive properties of nanoclay-reinforced syntactic foams at quasi-static and high strain rate loading. Polymer-Plastics Technology and Engineering, 53(10), pp. 990-999. ISSN (print) 0360-2559

Al-Khudairi, Othman, Hadavinia, Homa, Lewis, Eoin, Osborne, Barnaby and Bryars, Lee S. (2014) Building delamination fracture envelope under Mode I / Mode II loading for FRP composite materials. In: Elmarakbi, Ahmed, (ed.) Advanced composite materials for automotive applications: structural integrity and crashworthiness. Chichester, U.K. : John Wiley & Sons. pp. 293-310. (Automotive Series) ISBN 9781118423868

Al-Khudairi, Othman (2014) Structural performance of horizontal axis wind turbine blade. (PhD thesis), Kingston University, .

Antoniadis, I.A., Venetsanos, D. T. and Papaspyridis, F.G. (2014) Dynamic non-linear energy absorbers based on properly stretched in-plane elastomer structures. Nonlinear Dynamics, 75(1), pp. 367-386. ISSN (print) 0924-090X

Bhatia, Dinesh, Yang, Guang Jun, Sun, Jing and Wang, Jian (2014) Effect of leading edge geometry on boundary layer transition : an experimental approach. Applied Mechanics and Materials, 590, pp. 53-57. ISSN (print) 1660-9336

Breidi, Salah Eddine (2014) Development of methods to determine analytes in a variety of matrices with applications to forensic science. (PhD thesis), Kingston University, .

Cedillos, O., Jayaseelan, D.D. and Lee, W.E. (2014) Microstructure and mechanical properties of (Ta,Hf)C ultra-high temperature ceramics. In: 38th International Conference and Exposition on Advanced Ceramics and Composites; 26-31 Jan 2014, Daytona Beach, Florida, U.S.. (Unpublished)

Chan, KinYip (2014) Control algorithms for optimisation of engine combustion process with continuously changing fuel composition. (PhD thesis), Kingston University, .

Collier, G., Augousti, A.T. and Ordys, A. (2014) The Roadmap for Experimental Teaching of Science and Engineering Based Subjects. In: Morgan, S. and Benson, V., (eds.) Cutting-Edge Technologies and Social Media Use in Higher Education. Hershey, U.S : IGI Global. pp. 173-194. ISBN 9781466651746

Dababneh, Odeh and Kayran, Altan (2014) Design, analysis and optimization of thin walled semi-monocoque wing structures using different structural idealization in the preliminary design phase. International Journal of Structural Integrity, 5(3), pp. 214-226. ISSN (print) 1757-9864

Damdelen, Omer, Georgopoulos, Costas and Limbachiya, Mukesh (2014) Measuring thermal mass of sustainable concrete mixes. Journal of Civic Engineering and Architecture, 8(2), pp. 213-220. ISSN (print) 1934-7359

Dansoh, C. (2014) The viability of hydrogen storage to supplement renewable energy when used to power municipal scale reverse osmosis plant. International Journal of Hydrogen Energy, 39(24), pp. 12676-12689. ISSN (print) 0360-3199

Diakite, A., Collier, G., Ordys, A. and Augousti, A.T. (2014) CAN Bus based systems teaching using electronic rapid prototyping. In: 3rd World Conference on Technology and Engineering Education; 8-11 September 2014, Athens,Greece.

Duran, Olga and Petrou, Maria (2014) Subpixel temporal spectral imaging. Pattern Recognition Letters, 48, pp. 15-23. ISSN (print) 0167-8655

Effendy, Marwan (2014) Investigation of turbine blade trailing edge cooling and thermal mixing characteristics. (PhD thesis), Kingston University, .

Effendy, Marwan, Yao, Yufeng, Yao, Jun and Marchant, Denis R. (2014) Predicting film cooling performance of trailing-edge cutback turbine blades by detached eddy simulation. In: 52nd Aerospace Sciences Meeting; 13 - 17 Jan 2014, National Harbor, Maryland, U.S..

Elfituri, Ahmed A. (2014) Optimisation of resources deployment in a call centre by using stochastic data in simulation models. (PhD thesis), Kingston University, .

Fountas, Nikolaos, Vaxevanidis, Nikolaos, Stergiou, Constantinos and Benhadj-Djilali, Redha (2014) Development of a software-automated intelligent sculptured surface machining optimization environment. The International Journal of Advanced Manufacturing Technology, 75(5-8), pp. 909-931. ISSN (print) 0268-3768

Fountas, Nikolaos A., Kechagias, John, Benhadj-Djilali, Redha, Stergiou, Constantinos I. and Vaxevanidis, Nikolaos M. (2014) Optimizing 5-axis sculptured surface finish machining through design of experiments and neural networks. In: 12th Biennial Conference on Engineering Systems Design and Analysis; 5-27 Jun 2014, Copenhagen, Denmark. (ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1) ISBN 9780791845837

Gaz, Claudio, Flacco, Fabrizio and De Luca, Alessandro (2014) Identifying the dynamic model used by the KUKA LWR : a reverse engineering approach. In: 2014 IEEE International Conference on Robotics and Automation (ICRA); 31 May-07 Jun 2014, Hong Kong, China.

Ghasemnejad, H. (2014) Explicit finite element methods in modelling of crushing process of FRP composite absorbers. In: 7th International Conference on Finite Differences, Finite Elements, Finite Volumes and Boundary Elements (F-and-B '14); 15-17 May 2014, Gdansk - Poland.

Ghasemnejad, H., Ghafari-Namini, N. and Ravanpak, Z (2014) Failure Analysis of Off-Axis Crushing of Stitched Composite Absorbers. In: The 5th International Conference on Theoretical and Applied Mechanics (TAM '14); 30 Oct - 01 Nov 2014, Lisbon, Portugal. ISBN 9789604743964

Ghasemnejad, H. and Mirzaii, H. (2014) A robust finite element technique to model interlaminar damage in composite wind turbine blade materials. In: World Renewable Energy Congress XIII and Exhibition 2014; 3-8 Aug 2014, London, UK.

Ghasemnejad, Hessam and Mirzaii, Hossein (2014) To improve mixed-mode interlaminar fracture toughness of composite sub-structures. Open Journal of Composite Materials, 4(1), pp. 32-39. ISSN (print) 2164-5612

Ghasemnejad, Hessam and Aboutorabi, Akbar (2014) The response of natural fibre composites to impact damage: a case study. In: UNSPECIFIED, (ed.) Natural fibre composites: materials, processes and properties. Cambridge, U.K. : Woodhead Publishing Ltd. pp. 345-363. (Woodhead Publishing Series in Composites Science and Engineering, (47)) ISBN 9780857095244

Goodey, Jan and Milmo, Cahal (2014) Local authorities have ‘conflict of interest’ on fracking investments. Independent on Sunday, 28 Apr, p. 4. ISSN (print) 0958-1723

Grasso, Salvatore, Saunders, Theo, Porwal, Harshit, Cedillos-Barraza, Omar, Jayaseelan, Daniel Doni, Lee, William E. and Reece, Mike John (2014) Flash Spark Plasma Sintering (FSPS) of pure ZrB[sub]2. Journal of the American Ceramic Society, 97(8), pp. 2405-2408. ISSN (print) 0002-7820

Heidari, Ali and Wen, Jennifer (2014) Flame acceleration and transition from deflagration to detonation in hydrogen explosions. International Journal of Hydrogen Energy, 39(11), pp. 6184-6200. ISSN (print) 0360-3199

Heidari, Ali and Wen, Jennifer X. (2014) Numerical simulation of flame acceleration and deflagration to detonation transition in hydrogen-air mixture. International Journal of Hydrogen Energy, 39(36), pp. 21317-21327. ISSN (print) 0360-3199

Ismail, Mohd Azmi bin (2014) Enhancement of heat transfer performance on nacelle lip-skin for swirl anti-icing. (PhD thesis), Kingston University, .

Jayaseelan, D.D., Cedillos Barraza, O., Grasso, S. and Lee, W.E. (2014) Nanoanalytical characterisation of ternary carbides. In: 13th International Conference on Modern Materials and Technologies (CIMTEC 2014): 13th International Ceramics Congress; 8-13 Jun 2014, Montecatini Terme, Italy. (Unpublished)

Kanistras, Konstantinos, Rutherford, Matthew J., Vitzilaios, Nikolaos and Valavanis, Kimon P. (2014) Experimental Study of Circulation Control Wings at Low Reynolds Numbers. In: 32nd AIAA Applied Aerodynamics Conference; 16–20 June, 2014, Atlanta, GA, U.S.A..

Khazaeinejad, P., Usmani, A.S. and Laghrouche, O. (2014) An analytical study of the nonlinear thermo-mechanical behaviour of thin isotropic rectangular plates. Computers & Structures, 141, pp. 1-8. ISSN (print) 0045-7949

Khazaeinejad, Payam and Usmani, Asif S. (2014) Analytical solutions for nonlinear response of plates under thermal loading. In: 8th International Conference on Structures in Fire (SiF'14); 11 - 13 Jun 2014, Shanghai, China.

Khazaeinejad, Payam (2014) Demystifying the compressive ring in slabs under fire. In: 16th Young Researchers' Conference; 05 Mar 2014, London, U.K..

Lawrence, David [Researcher] (2014) Goodbye Piccadilly. Goodbye Piccadilly. .

Lawrence, David, ed. (2014) Omnibus : a social history of the London bus. London, U.K. : London Transport Museum. 292p. ISBN 9781871829235

Lukina, Elena (2014) An investigation of nitinol and titanium alloys for the correction of spinal scoliosis. (PhD thesis), Kingston University, .

Nixon, Jonathan D, Dey, Prasanta K, Davies, Philip A, Sagi, Sudakar and Berry, Robert F (2014) Supply chain optimisation of pyrolysis plant deployment using goal programming. Energy, 68, pp. 262-271. ISSN (print) 0360-5442

Padhra, Anil (2014) Quantifying the operational benefits of aircraft surface coatings. In: Flight and Airport Operations Conference; 09-10 June 2014, Prague, Czech Republic.

Petkova, Diana, Donchev, Ted and Wen, Jennifer (2014) Experimental study of the performance of CFRP strengthened small scale beams after heating to high temperatures. Construction and Building Materials, 68, pp. 55-61. ISSN (print) 0950-0618

Philbin, Simon (2014) Strategies for managing successful partnerships with industry. In: Annual Meeting of the Society of Research Administrators (SRA) International; 20-21 Oct 2014, San Diego, U.S.A.. (Unpublished)

Razmkhah, Omid (2014) Effect of sideways impact fall on the osteoporosis fractures of proximal femur. (PhD thesis), Kingston University, .

Riyadi, T.W.B., Zhang, T., Marchant, D. and Zhu, X. (2014) Synthesis and fabrication of NiAl coatings with Ti underlayer using induction heating. Surface and Coatings Technology, 258, pp. 154-159. ISSN (print) 0257-8972

Sagias, Vasileios, Stergiou, Constantinos, Evangelos, Ganiaris and Benhadj-Djilali, Redha (2014) Hybrid methodology of reverse 3D beams geometry analysis with embedded quality tools within the boundaries of a modern CAD system. World Transactions on Engineering and Technology Education, 12(3), pp. 443-448. ISSN (print) 1446-2257

Salin, Andrea (2014) Numerical modelling of swept and crossing shock-wave turbulent boundary-layer interactions. (PhD thesis), Kingston University, .

Sedyono, Joko (2014) Optimisation of stacking sequence of fibre reinforced plastic laminated composite structures subjected to buckling. (PhD thesis), Kingston University, .

Shakouri, P., Ordys, A. and Collier, G. (2014) Robotic Implementation of the Adaptive Cruise Control-Comparison of Three Control Methods. In: Březina, Tomáš and Jabloński, Ryszard, (eds.) Mechatronics 2013. Switzerland : Springer. pp. 633-640. ISBN 9783319022932

Shakouri, Payman and Ordys, Andrzej (2014) Nonlinear Model Predictive Control approach in design of Adaptive Cruise Control with automated switching to cruise control. Control Engineering Practice, 26, pp. 160-177. ISSN (print) 0967-0661

Stergiou, Constantinos and Lagonikas, Alexandros (2014) Systematic design of a robotic scanner for industrial pipelines. World Transactions on Engineering and Technology Education, 12(3), pp. 386-391. ISSN (print) 1446-2257

Tellis, Eleftherios Stamatios N., Besseris, Georgios J., Stergiou, Constantinos and Limbachiya, Mukesh (2014) Multivariate optimisation of key factors for construction operations. International Journal of Quality Engineering and Technology, 4(3), pp. 200-2012. ISSN (print) 1757-2177

Tidswell, Mark and Muppala, Siva (2014) A numerical study of turbulent flame speed models for H2/CH4/Air premixed combustion. International Journal of Enhanced Research in Science Technology & Engineering, 3(6), pp. 407-422. ISSN (online) 2319-7463

Torabmostaedi, Hosein and Zhang, Tao (2014) Computational study of the effect of processing parameters on the formation and growth of ZrO2 nanoparticles in FSP process. Chemical Engineering and Processing: Process Intensification, 78, pp. 1-10. ISSN (print) 0255-2701

Torabmostaedi, Hosein (2014) Computer simulation of processing controls on the formation and growth of nanoparticles in FSP. (PhD thesis), Kingston University, .

Torabmostaedi, Hosein and Zhang, Tao (2014) Numerical optimization of quenching efficiency and particle size control in flame synthesis of ZrO[sub]2 nanoparticles. Journal of Thermal Spray Technology, 23(8), pp. 1478-1492. ISSN (print) 1059-9630

Tsiakatouras, George, Tsellou, Eirini and Stergiou, Constantinos (2014) Comparative study on nanotubes reinforced with carbon filaments for the 3D printing of mechanical parts. World Transactions on Engineering and Technology Education, 12(3), pp. 392-396. ISSN (print) 1446-2257

Udechukwu, Izunna, Dembele, Siaka, Heidari, Ali, Volkov, Konstantin and Wen, Jennifer (2014) Investigation of liquefied natural gas (LNG) dispersion using computational fluid dynamics. In: 6th. European Conference on Computational Fluid Dynamics (ECFD VI); 20-25 Jul 2014, Barcelona, Spain.

Udechukwu, Izunna D, Dembele, Siaka, Heidari, Ali, Volkov, Konstantin N and Wen, Jennifer X (2014) Computational fluid dynamics simulation of LNG dispersion using openFOAM. In: 22nd Annual Conference of the CFD Society of Canada; 1-4 Jun 2014, Toronto, Canada.

Vendra, Chandra Madhav Rao (2014) Large eddy simulations of turbulent flame deflagration with wall interactions. (PhD thesis), Kingston University, .

Volkov, K (2014) Formulation of wall boundary conditions in turbulent flow computations on unstructured meshes. Computational Mathematics and Mathematical Physics, 54(2), pp. 353-367. ISSN (print) 0965-5425

Volkov, K. N. and Karpenko, A. G. (2014) Computational modeling of free convection between coaxial cylinders on the basis of a preconditioned form of Navier–Stokes equations. Journal of Engineering Physics and Thermophysics, 87(4), pp. 929-935. ISSN (print) 1062-0125

Volkov, K. N., Derugin, Yu. N., Emelyanov, V. N., Kozelkov, A. S. and Teterina, I. V. (2014) An algebraic multigrid method in problems of computational physics. Vychislitel'nye Metody i Programirovaniye, 15(2), pp. 183-200. ISSN (print) 0507-5386

Wang, C.J., Wen, J.X., chen, Z.B. and Dembele, S. (2014) Predicting radiative characteristics of hydrogen and hydrogen/methane jet fires using FireFOAM. International Journal of Hydrogen Energy, 39(35), pp. 20560-20569. ISSN (print) 0360-3199

Wanninayake, I.B., Seneviratne, L.D. and Althoefer, K. (2014) Estimation of tissue stiffness using a prototype of air-float stiffness probe. In: IEEE International Conference on Robotics and Automation; 31 May - 7 June 2014, Hong Kong.

Xu, B.P. and Wen, J.X. (2014) The effect of tube internal geometry on the propensity to spontaneous ignition in pressurized hydrogen release. International Journal Of Hydrogen Energy, 39(35), pp. 20503-20508. ISSN (print) 0360-3199

Zapata-Solvas, E., Jayaseelan, D.D., Brown, P.M. and Lee, W.E. (2014) Effect of La[sub]2O[sub]3 addition on long-term oxidation kinetics of ZrB[sub]2–SiC and HfB[sub]2–SiC ultra-high temperature ceramics. Journal of the European Ceramic Society, 34(15), pp. 3535-3548. ISSN (print) 0955-2219

Zhao, Dezong, Liu, Cunjia, Stobart, Richard, Deng, Jiamei, Winward, Edward and Dong, Guangyu (2014) An explicit model predictive control framework for turbocharged diesel engines. IEEE Transactions on Industrial Electronics, 61(7), pp. 3540-3552. ISSN (print) 0278-0046