Items where Research Area is "Research Areas > Mechanical, aeronautical and manufacturing engineering"

Up a level
Export as [feed] Atom [feed] RSS
Group by: First Author/Editor | Item Type | Year
Jump to: A | B | C | D | F | G | H | J | K | L | M | N | P | R | S | U | V | W | Z
Number of items: 55.

A

Abde Quader Alzu'bi, Hamzeh Mahmoud [Inventor], Abd Allateef, Imad [Inventor], Zweiri, Yahya [Inventor], Alkhateeb, Basim [Inventor] and Al-Majali, Yahya Taha Ayed [Inventor] (2013) King Abdullah II Design and Development Bureau Sided performance coaxial vertical takeoff and landing (vtol) uav and pitch stability technique using oblique active tilting (oat). US20130105620.

Aghajani, Hamed, Dembele, Siaka and Wen, Jennifer (2013) Modelling of Sprinkler Sprays using Deterministic and Stochastic Approaches. In: 7th International Seminar on Fire and Explosion Hazards (ISFEH); 5 – 10 May 2013, Providence, USA. ISBN 9789810759407

Aghajani, Hamed (2013) Modelling the initial spray characteristics of fire sprinklers. (PhD thesis), Kingston University, uk.bl.ethos.587413.

Al-Khazali, H. and Askari, M. (2013) Gyroscopic effects on a cantilever rotor system – a comparative analysis. In: NWC2013, NAFEMS 14th World Congress; 9-12 June 2013, Salzburg, Austria. (Unpublished)

Al-Khazali, H.A.H. and Askari, M.R. (2013) Improvement of safety engineering design in rotating structures by detection of resonance frequency signals. In: SEM 2013 Annual Conference & Exposition on Experimental and Applied Mechanics; 3-5 June 2013, Lombard, USA. (Unpublished)

Alzu'bi, Hamzeh Mahmoud Abde Quader [Inventor], Allateef, Imad Abd [Inventor], Zweiri, Yahya [Inventor], Alkhateeb, Basim [Inventor] and Al-Masarwah, Ibrahem Mubarak Saleem [Inventor] (2013) King Abdullah II Design and Development Bureau Quad tilt rotor vertical take off and landing (vtol) unmanned aerial vehicle (uav) with 45 degree rotors. US20130105635.

B

Bridges, C.P., Kenyon, S., Shaw, P., Simons, E., Visagie, L., Theodorou, T., Yeomans, B., Parsons, J., Lappas, V., Underwood, C., Jason, S., Mellor, D., Navarathinam, N., Wellstead, P., Schofield, A., Linehan, R., Barrera-Ars, J., Dyer, B., Liddle, D. and Sweeting, M.N. (2013) A baptism of fire : The STRaND-1 nanosatellite. In: 27th Annual AIAA/USU Conference on Small Satellites; 10-15 Aug 2013, Logan, Utah, U.S..

C

Chan, K. Y., Ordys, A., Duran, O., Volkov, K. and Deng, J. (2013) SI Engine Simulation Using Residual Gas and Neural Network Modeling to Virtually Estimate the Fuel Composition. In: Ao, S. I. , Douglas, Craig , Grudnfest, W. S. and Burgstone, Jon, (eds.) Proceedings of the World Congress on Engineering and Computer Science 2013. Newswood Limited. pp. 897-903. II ISSN (print) 2078-0958 ISBN 9789881925312

Chan, Kin Yip, Ordys, Andrzej, Volkov, Konstantin and Duran, Olga (2013) Comparison of engine simulation software for development of control system. Modelling and Simulation in Engineering, 2013(401643), ISSN (print) 1687-5591

Chan, KinYip (2013) Fuel composition and engine control using state-space and neural network. In: UKACC PhD Presentation Showcase; 31 Oct 2013, London, U.K.. (Unpublished)

D

Dansoh, Clifford (2013) The viability of renewable energy and energy storage for the provision of power to operate reverse osmosis desalination facilities. In: World Wind Energy Association, (ed.) Wind Energy International 2014/2015. Bonn, Germany : World Wind Energy Association. pp. 369-391. ISBN 9783940683076

Davar, A., Khalili, S.M.R. and Hadavinia, H. (2013) Free vibrations of functionally graded circular cylindrical shells under internal pressure. International Journal of Advanced Design and Manufacturing Technology, 6(4), pp. 49-58. ISSN (print) 2252-0406

Deng, Jiamei (2013) Dynamic neural networks with hybrid structures for nonlinear system identification. Engineering Applications of Artificial Intelligence, 26(1), pp. 281-292. ISSN (print) 0952-1976

F

Fountas, N.A., Vaxevanidis, N.M., Stergiou, C.I. and Benhadj-Djilali, R. (2013) Optimum CNC free-form surface machining through design of experiments in CAM software. In: Davim, J. Paulo, (ed.) Modern mechanical engineering: research, development and education. Springer. pp. 243-284. (Materials Forming, Machining and Tribology) ISBN 9783642451751

Fountas, N.A., Vaxevanidis, N.M., Stergiou, C.I. and Benhadj-Djilali, R. (2013) Surface error investigation on finish-machined sculptured models simulated in CAM software. In: 13th International Conference ″Research and Development in Mechanical Industry″ RaDMI 2013; 12-15 Sept 2015, Kopaonik, Serbia. ISBN 9788660750428

G

Ghafari-Namini, Nasrin (2013) Design of new composite crash absorbers stitched by natural fibres to improve effective crack growth. (PhD thesis), Kingston University, uk.bl.ethos.587384.

Ghasemnejad, H., Barrington, P.E. and Roshan, G. (2013) Advanced crash absorbers stitched by natural fibres to improve effective crack growth resistance. In: International Conference on Composite Materials (ICCM19); 28 Jul - 2 Aug 2013, Montreal, Canada. (Unpublished)

Ghasemnejad, H., Argentiero, Y., Tez, T.A. and Barrington, P.E. (2013) Impact damage response of natural stitched single lap-joint in composite structures. Materials and Design, 51, pp. 552-560. ISSN (print) 0264-1275

Godbolt, Bryan, Vitzilaios, Nikolaos I. and Lynch, Alan F. (2013) Experimental Validation of a Helicopter Autopilot Design using Model-Based PID Control. Journal of Intelligent and Robotic Systems, 70(1), pp. 385-399. ISSN (print) 0921-0296

Godbolt, Bryan, Vitzilaios, Nikolaos, Bergen, Chris and Lynch, Alan F. (2013) Experimental Validation of a Helicopter Autopilot: Time-Varying Trajectory tracking. In: International Conference on Unmanned Aircraft Systems (ICUAS); 28-31 May, 2013, Atlanta, GA, U.S.A.. ISBN 9781479908158

H

Hamzeei, Mahdi, Zanjirani Farahani, Reza and Rashidi-Bejgan, Hannaneh (2013) An exact and a simulated annealing algorithm for simultaneously determining flow path and the location of P/D stations in bidirectional path. Journal of Manufacturing Systems, 32(4), pp. 648-654. ISSN (print) 0278-6125

Hamzheei, Mahdi, Zanjirani Farahani, Reza and Rashidi, Hannaneh (2013) An ant colony-based algorithm for finding the shortest bidirectional path for automated guided vehicles in a block layout. The International Journal of Advanced Manufacturing Technology, 64(1-4), pp. 399-409. ISSN (print) 0268-3768

J

Jie, Hongen (2013) CFD modelling of transient two-phase flows for high pressure pipeline decompression. (PhD thesis), Kingston University, .

K

Khazaeinejad, Payam (2013) Thermo-mechanical analysis of shells using a hybrid-Trefftz formulation. In: 15th Young Researchers' Conference; 14 Mar 2013, London, U.K..

Khazaeinejad, Payam, Usmani, Asif S. and Laghrouche, Omar (2013) Transient thermoelastic analysis of plates by hybrid-Trefftz method. In: ICOVP-2013 : 11th International Conference on Vibration Problems; 09 - 12 Sep 2013, Lisbon, Portugal. (Unpublished)

Kock, Peter (2013) Prediction and predictive control for economic optimisation of vehicle operation. (PhD thesis), Kingston University, .

Kusztelan, A., Marchant, Denis, Yao, Yufeng and Wang, Yawei (2013) Investigating the effects on the low speed response of a pressure charged IC engine through the application of a twin-entry turbine housing. In: Yang, Gi-Chul , Ao, Sio-long and Gelman, Len, (eds.) IAENG Transactions on Engineering Technologies. Springer Netherlands. pp. 201-213. (Lecture Notes in Electrical Engineering, 229) ISSN (print) 1876-1100 ISBN 9789400761902

L

Liaghat, GH., Shanazari, H., Tahmasebi, M., Aboutorabi, A. and Hadavinia, H. (2013) A Modified Analytical Model for Analysis of Perforation of Projectile into Ceramic Composite Targets. International Journal of Composite Materials, 3(6B), pp. 17-22. ISSN (print) 2166-479X

M

Marchant, Denis, Kusztelan, Alex, Yao, Yufeng and Wang, Yawei (2013) Comparative study of turbine shaft speed for two alternative turbocharger types fitted to a light-duty CI engine. In: Trans & MOTAUTO'13 - XXI International Scientific and Technical Conference on Transport, Road-Building, Agricultural, Hoisting & Hauling and Military Technics and Technologies; 01 - 02 Jul 2013, Varna, Bulgaria.

Masinghe, Waruna D (2013) A biomechanical approach to analyse the kinematics and dynamics of the tennis serve. (MSc(R) thesis), Kingston University, .

Mikailionyte, A and Lauritzen, J (2013) Comparing the effects of action and casual video game play on central and peripheral contrast sensitivity. In: Applied Vision Association Christmas Meeting; 19-20 Dec 2013, Leuven, Belgium. (Unpublished)

N

Nixon, Jonathan, Kumar Dey, Prasanta and Davies, Philip (2013) An interdisciplinary approach to designing and evaluating a hybrid solar-biomass power plant. International Journal of Energy Sector Management, 7(3), pp. 321-337. ISSN (online) 1750-6220

Nixon, Jonathan D, Dey, P.K. and Davies, P.A. (2013) Design of a novel solar thermal collector using a multi-criteria decision-making methodology. Journal of Cleaner Production, 59, pp. 150-159. ISSN (print) 0959-6526

Nixon, Jonathan D, Dey, P.K., Ghosh, S.K. and Davies, P.A. (2013) Evaluation of options for energy recovery from municipal solid waste in India using the hierarchical analytical network process. Energy, 59, pp. 215-223. ISSN (print) 0360-5442

Nixon, Jonathan D, Wright, D.G., Dey, P.K., Ghosh, S.K. and Davies, P.A. (2013) A comparative assessment of waste incinerators in the UK. Waste Management, 33(11), pp. 2234-2244. ISSN (print) 0956-053X

P

Panchagnula, S, Augousti, A, McGlade, D, Pierscionek, B and Lauritzen, J (2013) Peripheral contrast sensitivity is impaired in adults with reading difficulties. In: Applied Vision Association Christmas Meeting; 19-20 Dec 2013, Leuven, Belgium. (Unpublished)

Papadopoulos, F., Aiyappa, D., Shapriya, R., Sotirchos, E., Ghasemnejad, H. and Benhadj-Djilali, R. (2013) Advanced natural stitched composite materials in skin-stiffener of wind turbine blade structures. Key Engineering Materials, 525-26, pp. 45-48. ISSN (print) 1013-9826

R

Razmkhah, O., Ghasemnejad, H., Argyriou, V. and Aboutorabi, A. (2013) Advanced finite element analysis to predict impact damage behaviour of fractured hip. In: 19th Congress of the European Society of Biomechanics (ESB 2013); Aug 25-28 2013, Patras, Greece. (Unpublished)

Razmkhah, O. and Ghasemnejad, H. (2013) Impact damage response of osteoporosis hip bone. In: 4th European Conference of Mechanical Engineering (ECME' 13); 29-31 Oct 2013, Paris, France. (Recent Advances in Mechanical Engineering Applications, no. 8) ISSN (print) 2227-4596 ISBN 9789604743452

Riyadi, Tri Widodo Besar (2013) High performance intermetallic and ceramic formed by SHS process. (PhD thesis), Kingston University, uk.bl.ethos.587394.

S

Sagias, Vasileios, Stergiou, Constantinos and Pappas-Skellas, Vasileios (2013) 3D beams reverse geometry analysis to optimise the Boundary Element Method mathematical model creation. World Transactions on Engineering and Technology Education, 11(3), pp. 143-149. ISSN (print) 1446-2257

Sahinkaya, Mehmet N., Wang, Pengfei and Akehurst, Sam (2013) Causal inversion of non-minimum-phase systems for hardware-in-the-loop transmission testing. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 227(I3), pp. 298-307. ISSN (print) 0959-6518

Sarjito and Marchant, Denis (2013) A study of a multi-stage downdraught evaporative cooling device using CFD to assess the effect of the primary inlet to mixing stack area ratio: Preliminary work to establish the baseline performance of the device. Applied Mechanics and Materials, 465-6, pp. 248-254. ISSN (print) 1660-9336

Sarjito, S and Marchant, Denis (2013) Effect of downdraught mass flow rate generated and the uniformity of the velocity and temperature profiles downstream of the multi-array nozzles. In: 13th International Conference on Quality in Research (QiR) 2013, Yogyakarta, Indonesia; 25 - 28 Jun 2013, Yogyakarta, Indonesia. (Proceeding of the 13th International Conference on QIR (Quality in Research)) ISSN (online) 1411-1284

Shakouri, Payman, Ordys, Andrzej and Collier, Gordana (2013) Teaching model predictive control algorithm using starter kit robot. Engineering Education, 8(2), pp. 30-43. ISSN (print) 1750-0052

Sharp, Samuel John (2013) Improving the accuracy and speed of tracking and motion stabilisation systems. (MSc(R) thesis), Kingston University, .

U

Umeokafor, Nnedinma, Isaac, David, Jones, Keith and Umeadi, Boniface (2013) Enforcement of occupational safety and health regulations in Nigeria: An exploration. In: 1st International Scientific Forum; 12 - 14 Dec 2013, Tirana, Albania.

V

Volkov, K. (2013) Large-eddy simulation of turbulence-induced aero-optical effects in free shear and wall bounded flows. In: Driss, Zied, (ed.) Turbulent flows: prediction, modeling and analysis. Hauppauge, U.S. : Nova Science. pp. 27-69. (Physics research and technology) ISBN 9781624177422

Volkov, K. N. and Emelyanov, V. N. (2013) Computational technologies in problems of gas and fluid mechanics. Moscow, Russia : BINOM Knowledge Laboratory. ISBN 9785922114387

Volkov, K. N., Emelyanov, V. N. and Zazimko, V. A. (2013) Turbulent jet: statistical models and large-eddy simulation. Moscow, Russia : Fizmatlit. 360p. ISBN 9785922115261

Volkov, Konstantin and Emelyanov, Vladislav (2013) Large-eddy simulation of channel gas-particle flow induced by wall injection with forced pressure oscillations. In: European Turbulence Conference 14; 01 - 04 Sep 2013, Lyon, France.

W

Wanninayake, Indika B., Dasgupta, Prokar, Seneviratne, Lakmal D. and Althoefer, Kaspar (2013) Air-float Palpation Probe for Tissue Abnormality Identification During Minimally Invasive Surgery. IEEE Transactions on Biomedical Engineering, 60(10), pp. 2735-2744. ISSN (print) 0018-9294

Wen, Jennifer, Heidari, Ali, Xu, Baopeng and Jie, Hongen (2013) Dispersion of carbon dioxide from vertical vent and horizontal releases - a numerical study. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 227(2), pp. 125-139.

Z

Zapata-Solvas, E., Jayaseelan, D.D., Lin, H.T., Brown, P. and Lee, W.E. (2013) Mechanical properties of ZrB[sub]2- and HfB[sub]2-based ultra-high temperature ceramics fabricated by spark plasma sintering. Journal of the European Ceramic Society, 33(7), pp. 1373-1386. ISSN (print) 0955-2219

Zapata-Solvas, E., Jayaseelan, D.D., Brown, P.M. and Lee, W.E. (2013) Thermal properties of La[sub]2O[sub]3-doped ZrB[sub]2- and HfB[sub]2-based ultra-high temperature ceramics. Journal of the European Ceramic Society, 33(15-16), pp. 3467-3472. ISSN (print) 0955-2219

This list was generated on Wed Oct 28 04:19:10 2020 GMT.