Items where Faculty is "Faculty of Science, Engineering and Computing (until 2017) > School of Mechanical and Automotive Engineering"
Number of items: 44. ArticleAhmadi, H., Liaghat, G.H., Shokreih, M. M., Aboutorabi, A., Hadavinia, H. and Ordys, A. (2014) Compressive properties of nanoclay-reinforced syntactic foams at quasi-static and high strain rate loading. Polymer-Plastics Technology and Engineering, 53(10), pp. 990-999. ISSN (print) 0360-2559 Bhatia, Dinesh, Yang, Guang Jun, Sun, Jing and Wang, Jian (2014) Effect of leading edge geometry on boundary layer transition : an experimental approach. Applied Mechanics and Materials, 590, pp. 53-57. ISSN (print) 1660-9336 Chan, K. Y., Ordys, A., Duran, O., Volkov, K. and Deng, J. (2014) Minimizing engine emissions using state-feedback control with LQR and artificial intelligence fuel estimator. International Journal of Innovative Research in Science, Engineering and Technology, 2(3), pp. 1-9. ISSN (print) 2319-8753 Damdelen, Omer, Georgopoulos, Costas and Limbachiya, Mukesh (2014) Measuring thermal mass of sustainable concrete mixes. Journal of Civic Engineering and Architecture, 8(2), pp. 213-220. ISSN (print) 1934-7359 Duran, Olga and Petrou, Maria (2014) Subpixel temporal spectral imaging. Pattern Recognition Letters, 48, pp. 15-23. ISSN (print) 0167-8655 Fountas, Nikolaos, Vaxevanidis, Nikolaos, Stergiou, Constantinos and Benhadj-Djilali, Redha (2014) Development of a software-automated intelligent sculptured surface machining optimization environment. The International Journal of Advanced Manufacturing Technology, 75(5-8), pp. 909-931. ISSN (print) 0268-3768 Heidari, Ali and Wen, Jennifer (2014) Flame acceleration and transition from deflagration to detonation in hydrogen explosions. International Journal of Hydrogen Energy, 39(11), pp. 6184-6200. ISSN (print) 0360-3199 Heidari, Ali and Wen, Jennifer X. (2014) Numerical simulation of flame acceleration and deflagration to detonation transition in hydrogen-air mixture. International Journal of Hydrogen Energy, 39(36), pp. 21317-21327. ISSN (print) 0360-3199 Khan, Zaib Ullah, Khan, Nasim, Askari, S. Jawid and Aboutorabi, Akbar (2014) Extraction of metallurgical grade silicon (MGS) from raw mineral quartz available in Pakistan. Sylwan: czasopismo lesne, 158(6), pp. 418-432. ISSN (print) 0039-7660 Khazaeinejad, P., Usmani, A.S. and Laghrouche, O. (2014) An analytical study of the nonlinear thermo-mechanical behaviour of thin isotropic rectangular plates. Computers & Structures, 141, pp. 1-8. ISSN (print) 0045-7949 Petkova, Diana, Donchev, Ted and Wen, Jennifer (2014) Experimental study of the performance of CFRP strengthened small scale beams after heating to high temperatures. Construction and Building Materials, 68, pp. 55-61. ISSN (print) 0950-0618 Riyadi, T.W.B., Zhang, T., Marchant, D. and Zhu, X. (2014) Synthesis and fabrication of NiAl coatings with Ti underlayer using induction heating. Surface and Coatings Technology, 258, pp. 154-159. ISSN (print) 0257-8972 Sagias, Vasileios, Stergiou, Constantinos, Evangelos, Ganiaris and Benhadj-Djilali, Redha (2014) Hybrid methodology of reverse 3D beams geometry analysis with embedded quality tools within the boundaries of a modern CAD system. World Transactions on Engineering and Technology Education, 12(3), pp. 443-448. ISSN (print) 1446-2257 Shakouri, Payman and Ordys, Andrzej (2014) Nonlinear Model Predictive Control approach in design of Adaptive Cruise Control with automated switching to cruise control. Control Engineering Practice, 26, pp. 160-177. ISSN (print) 0967-0661 Stergiou, Constantinos and Lagonikas, Alexandros (2014) Systematic design of a robotic scanner for industrial pipelines. World Transactions on Engineering and Technology Education, 12(3), pp. 386-391. ISSN (print) 1446-2257 Torabmostaedi, H. and Zhang, T. (2014) Effect of nozzle geometry and processing parameters on the formation of nanoparticles using FSP. Chemical Engineering Research and Design, 92(11), pp. 2470-2478. ISSN (print) 0263-8762 Torabmostaedi, Hosein and Zhang, Tao (2014) Computational study of the effect of processing parameters on the formation and growth of ZrO2 nanoparticles in FSP process. Chemical Engineering and Processing: Process Intensification, 78, pp. 1-10. ISSN (print) 0255-2701 Torabmostaedi, Hosein and Zhang, Tao (2014) Numerical optimization of quenching efficiency and particle size control in flame synthesis of ZrO[sub]2 nanoparticles. Journal of Thermal Spray Technology, 23(8), pp. 1478-1492. ISSN (print) 1059-9630 Tsiakatouras, George, Tsellou, Eirini and Stergiou, Constantinos (2014) Comparative study on nanotubes reinforced with carbon filaments for the 3D printing of mechanical parts. World Transactions on Engineering and Technology Education, 12(3), pp. 392-396. ISSN (print) 1446-2257 Volkov, K (2014) Formulation of wall boundary conditions in turbulent flow computations on unstructured meshes. Computational Mathematics and Mathematical Physics, 54(2), pp. 353-367. ISSN (print) 0965-5425 Volkov, K. N. and Karpenko, A. G. (2014) Computational modeling of free convection between coaxial cylinders on the basis of a preconditioned form of Navier–Stokes equations. Journal of Engineering Physics and Thermophysics, 87(4), pp. 929-935. ISSN (print) 1062-0125 Volkov, K. N., Derugin, Yu. N., Emelyanov, V. N., Kozelkov, A. S. and Teterina, I. V. (2014) An algebraic multigrid method in problems of computational physics. Vychislitel'nye Metody i Programirovaniye, 15(2), pp. 183-200. ISSN (print) 0507-5386 Xu, B.P. and Wen, J.X. (2014) The effect of tube internal geometry on the propensity to spontaneous ignition in pressurized hydrogen release. International Journal Of Hydrogen Energy, 39(35), pp. 20503-20508. ISSN (print) 0360-3199 Zhao, Dezong, Liu, Cunjia, Stobart, Richard, Deng, Jiamei, Winward, Edward and Dong, Guangyu (2014) An explicit model predictive control framework for turbocharged diesel engines. IEEE Transactions on Industrial Electronics, 61(7), pp. 3540-3552. ISSN (print) 0278-0046 Book SectionCollier, G., Augousti, A.T. and Ordys, A. (2014) The Roadmap for Experimental Teaching of Science and Engineering Based Subjects. In: Morgan, S. and Benson, V., (eds.) Cutting-Edge Technologies and Social Media Use in Higher Education. Hershey, U.S : IGI Global. pp. 173-194. ISBN 9781466651746 Shakouri, P., Ordys, A. and Collier, G. (2014) Robotic Implementation of the Adaptive Cruise Control-Comparison of Three Control Methods. In: Březina, Tomáš and Jabloński, Ryszard, (eds.) Mechatronics 2013. Switzerland : Springer. pp. 633-640. ISBN 9783319022932 Conference or Workshop ItemCedillos, O., Jayaseelan, D.D. and Lee, W.E. (2014) Microstructure and mechanical properties of (Ta,Hf)C ultra-high temperature ceramics. In: 38th International Conference and Exposition on Advanced Ceramics and Composites; 26-31 Jan 2014, Daytona Beach, Florida, U.S.. (Unpublished) Chan, Kinyip, Ordys, Andrzej, Duran, Olga, Volkov, Konstantin and Deng, Jiamei (2014) Adaptive neuro-fuzzy method to estimate virtual SI engine fuel composition using residual gas parameters. In: 10th International Conference on Control (Control 2014); 9 - 11 Jul 2014, Loughborough. Diakite, A., Collier, G., Ordys, A. and Augousti, A.T. (2014) CAN Bus based systems teaching using electronic rapid prototyping. In: 3rd World Conference on Technology and Engineering Education; 8-11 September 2014, Athens,Greece. Duran, O (2014) Subpixel tracking using spectral data and Kalman filter. In: 6th Workshop on Hyperspectral Image and Signal Processing: Evolution in Remote Sensing (WHISPERS); 24-27 June 2014, Lausanne, Switzerland. Fountas, Nikolaos A., Kechagias, John, Benhadj-Djilali, Redha, Stergiou, Constantinos I. and Vaxevanidis, Nikolaos M. (2014) Optimizing 5-axis sculptured surface finish machining through design of experiments and neural networks. In: 12th Biennial Conference on Engineering Systems Design and Analysis; 5-27 Jun 2014, Copenhagen, Denmark. (ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1) ISBN 9780791845837 Jayaseelan, D.D., Cedillos Barraza, O., Grasso, S. and Lee, W.E. (2014) Nanoanalytical characterisation of ternary carbides. In: 13th International Conference on Modern Materials and Technologies (CIMTEC 2014): 13th International Ceramics Congress; 8-13 Jun 2014, Montecatini Terme, Italy. (Unpublished) Kanistras, Konstantinos, Rutherford, Matthew J., Vitzilaios, Nikolaos and Valavanis, Kimon P. (2014) Experimental Study of Circulation Control Wings at Low Reynolds Numbers. In: 32nd AIAA Applied Aerodynamics Conference; 16–20 June, 2014, Atlanta, GA, U.S.A.. Khazaeinejad, Payam and Usmani, Asif S. (2014) Analytical solutions for nonlinear response of plates under thermal loading. In: 8th International Conference on Structures in Fire (SiF'14); 11 - 13 Jun 2014, Shanghai, China. Khazaeinejad, Payam (2014) Demystifying the compressive ring in slabs under fire. In: 16th Young Researchers' Conference; 05 Mar 2014, London, U.K.. Morgan, Michelle and Ordys, Andrew (2014) Engineering postgraduate courses: Exploring expectations and attitudes towards postgraduate study. In: Engineering Professors’ Council Congress 2014; 08 Apr 2014, Glasgow, U.K.. (Unpublished) Udechukwu, Izunna, Dembele, Siaka, Heidari, Ali, Volkov, Konstantin and Wen, Jennifer (2014) Investigation of liquefied natural gas (LNG) dispersion using computational fluid dynamics. In: 6th. European Conference on Computational Fluid Dynamics (ECFD VI); 20-25 Jul 2014, Barcelona, Spain. Udechukwu, Izunna D, Dembele, Siaka, Heidari, Ali, Volkov, Konstantin N and Wen, Jennifer X (2014) Computational fluid dynamics simulation of LNG dispersion using openFOAM. In: 22nd Annual Conference of the CFD Society of Canada; 1-4 Jun 2014, Toronto, Canada. ThesisAl-Khudairi, Othman (2014) Structural performance of horizontal axis wind turbine blade. (PhD thesis), Kingston University, . Chan, KinYip (2014) Control algorithms for optimisation of engine combustion process with continuously changing fuel composition. (PhD thesis), Kingston University, . Elfituri, Ahmed A. (2014) Optimisation of resources deployment in a call centre by using stochastic data in simulation models. (PhD thesis), Kingston University, . Lukina, Elena (2014) An investigation of nitinol and titanium alloys for the correction of spinal scoliosis. (PhD thesis), Kingston University, . Sedyono, Joko (2014) Optimisation of stacking sequence of fibre reinforced plastic laminated composite structures subjected to buckling. (PhD thesis), Kingston University, . Torabmostaedi, Hosein (2014) Computer simulation of processing controls on the formation and growth of nanoparticles in FSP. (PhD thesis), Kingston University, . |