Article

Adnan, A, Cazan, A, Safa, M., Lung, A. W. M. and Williams, G. (2009) Evaluation of potential manufacturing suppliers using analytical hierarchy process and cluster analysis for benchmarking. International Journal of Security, 3(3), pp. 36-47. ISSN (online) 1985-2320

Azarafza, R., Khalili, S.M.R., Jafari, A.A. and Davar, A. (2009) Analysis and optimization of laminated composite circular cylindrical shell subjected to compressive axial and transverse transient dynamic loads. Thin-Walled Structures, 47(8-9), pp. 970-983. ISSN (print) 0263-8231

Bao, Y., Zhang, T., Gawne, D.T. and Mason, P. (2009) Quantitative model for the viscous flow and composition of two-phase silicon nitride-based particles in plasma-spray deposition. Journal of the European Ceramic Society, 29(8), pp. 1521-1528. ISSN (print) 0955-2219

Coppola, L, Nardone, R, Rescio, P and Bromhead, E (2009) The ruined town of Campomaggiore Vecchio, Basilicata, Italy. Quarterly Journal of Engineering Geology and Hydrogeology, 42(3), pp. 383-387. ISSN (print) 1470-9236

Duran, O. and Petrou, M. (2009) Spectral unmixing with negative and superunity abundances for subpixel anomaly detection. IEEE Geoscience and Remote Sensing Letters, 6(1), 152 -156. ISSN (print) 1558-0571

Dykes, A P, Boylan, N., Jennings, P. and Long, M. (2009) Discussion of a Peat slope failure in Ireland by N. Boylan, P. Jennings & M. Long, Quarterly Journal of Engineering Geology and Hydrogeology, 41(1), 93-108. Quarterly Journal of Engineering Geology and Hydrogeology, 42(1), pp. 123-128. ISSN (print) 1470-9236

Dykes, A P (2009) Geomorphological maps of Irish peat landslides created using hand-held GPS - second edition. Journal of Maps, 2009, pp. 179-185. ISSN (online) 1744-5647

Ferraris, S.A., Madga, I and Wen, J.X. (2009) Large eddy simulation of the backdraft phenomenon and its mitigation in compartment fires with different opening geometries. Combustion Science and Technology, 181(6), pp. 853-876. ISSN (print) 0010-2202

Ghasemnejad, H., Blackman, B.R.K., Hadavinia, H. and Sudall, B. (2009) Experimental studies on fracture characterisation and energy absorption of GFRP composite box structures. Composite Structures, 88(2), pp. 253-261. ISSN (print) 0263-8223

Hadavinia, H. and Ghasemnejad, H. (2009) Effects of Mode-I and Mode-II interlaminar fracture toughness on the energy absorption of CFRP twill/weave composite box sections. Composite Structures, 89(2), pp. 303-314. ISSN (print) 0263-8223

Han, T. W., He, P. F., Wang, J. and Wu, A.H. (2009) Numerical simulation of temperature dependence of tensile mechanical properties for single graphene sheet. Journal of Tongji University (Natural Science), 37(12), ISSN (print) 0253-374X

Han, T. W., He, P. F., Wang, J., Zheng, B. L. and Wu, A. H. (2009) Strain rate dependences of tensile failure process for single graphene sheet: a molecular dynamics study. Science in China Series G: Physics, Mechanics & Astronomy, 39(9), pp. 1312-1319. ISSN (print) 1672-1780

Han, T.W., He, P.F., Wang, J. and Zheng, B.L. (2009) Molecular dynamics simulation of beta-SiC nanowire under uniaxial tension. Chinese Journal of Materials Research, 23(4), pp. 337-342. ISSN (print) 1005-3093

Hay, G.I., Southee, D.J., Evans, P.S.A., Harrison, D.J., Simpson, G.B. and Wood, J. (2009) A time-strain monitoring system fabricated via offset lithographic printing. Smart Materials and Structures, 18(1), 015015. ISSN (print) 0964-1726

Jenkins, D.P., Singh, H and Eames, P.C. (2009) Interventions for large-scale carbon emission reductions in future UK offices. Energy and Buildings, 41(12), pp. 1374-1380. ISSN (print) 0378-7788

Khalili, S.M.R., Jafarkarimi, M.H. and Abdollahi, M.A. (2009) Creep analysis of fibre reinforced adhesives in single lap joints - experimental study. International Journal of Adhesion and Adhesives, 29(6), pp. 656-661. ISSN (print) 0143-7496

Khorramabadi, M. Karami and Khazaeinejad, P. (2009) On stability of stiffened cylindrical shells with varying material properties. International Journal of Mechanical and Mechatronics Engineering, 3(8), pp. 898-903. ISSN (online) 1307-6892

Laila, D. S., Messina, A. R. and Pal, B. C. (2009) A refined Hilbert-Huang transform with applications to interarea oscillation monitoring. IEEE Transactions on Power Systems, 24(2), pp. 610-620. ISSN (print) 0885-8950

Li, W, Li, Y, Wang, J and Xiong, Y (2009) Functional solving process model toward product innovation design based on a functional solving model with multiple elements and evolutions. Proceedings of the Institution of Mechanical Engineers, Part B Journal of Engineering Manufacture, 223(12), pp. 1601-1614. ISSN (print) 0954-4054

Marrocchino, E., Fried, A.N., Koulouris, A. and Vaccaro, C. (2009) Micro-chemical/structural characterisation of thin layer masonry: a correlation with engineering performance. Construction and Building Materials, 23(1), pp. 582-594. ISSN (print) 0950-0618

Meddah, Mohammed Seddik and Tagnit-Hamou, Arezki (2009) Pore structure of concrete with mineral admixtures and its effect on self-desiccation shrinkage. ACI Materials Journal, 106(3), pp. 241-250. ISSN (print) 0889-325X

Meddah, Mohammed Seddik and Bencheikh, Mohamed (2009) Properties of concrete reinforced with different kinds of industrial waste fibre materials. Construction and Building Materials, 23(10), pp. 3196-3205. ISSN (print) 0950-0618

Muppala, S.P.R., Nakahara, M., Aluri, N.K., Kido, H., Wen, J.X. and Papalexandris, M.V. (2009) Experimental and analytical investigation of the turbulent burning velocity of two-component fuel mixtures of hydrogen, methane and propane. International Journal of Hydrogen Energy, 34(22), pp. 9258-9265. ISSN (print) 0360-3199

Najafizadeh, M.M., Hasani, A. and Khazaeinejad, P. (2009) Mechanical stability of functionally graded stiffened cylindrical shells. Applied Mathematical Modelling, 33(2), pp. 1151-1157. ISSN (print) 0307-904X

Pontikes, Y., Rathossi, C., Nikolopoulos, P., Angelopoulos, G.N., Jayaseelan, D.D. and Lee, W.E. (2009) Effect of firing temperature and atmosphere on sintering of ceramics made from Bayer process bauxite residue. Ceramics International, 35(1), pp. 401-407. ISSN (print) 0272-8842

Rahmani, O., Khalili, S.M.R., Malekzadeh, K. and Hadavinia, H. (2009) Free vibration analysis of sandwich structures with a flexible functionally graded syntactic core. Composite Structures, 91(2), pp. 229-235. ISSN (print) 0263-8223

Shang, Zhi (2009) CFD investigation of vertical rod bundles of supercritical water-cooled nuclear reactor. Nuclear Engineering and Design, 239(11), pp. 2562-2572. ISSN (print) 0029-5493

Suzuki, Masahiro, Meddah, Mohammed Seddik and Sato, Ryoichi (2009) Use of porous ceramic waste aggregates for internal curing of high-performance concrete. Cement and Concrete Research, 39(5), pp. 373-381. ISSN (print) 0008-8846

Tan, Xincai, Chen, Xiaogang, Wang, Jian and Raghunathan, Srinivasan (2009) Energy absorption and deformation in textile composite cellular structures. AIAA Journal: devoted to aerospace research and development, 47(3), pp. 790-795. ISSN (print) 0001-1452

Volkov, K.N. (2009) Preconditioning of the Euler and Navier-Stokes equations in low-velocity flow simulation on unstructure grids. Computational Mathematics and Mathematical Physics, 49(10), pp. 1789-1804. ISSN (print) 0965-5425

Wright, S., Andrews, G. and Sabir, H. (2009) A review of heat exchanger fouling in the context of aircraft air-conditioning systems, and the potential for electrostatic filtering. Applied Thermal Engineering, 29(13), pp. 2596-2609. ISSN (print) 1359-4311

Xu, B.P., Hima, L.EL., Wen, J.X. and Tam, V.H.Y. (2009) Numerical study of spontaneous ignition of pressurized hydrogen release into air. International Journal of Hydrogen Energy, 34(14), pp. 5954-5960. ISSN (print) 0360-3199

Xu, B.P., Wen, J. X., Dembele, S., Tam, V.H.Y. and Hawksworth, S.J. (2009) The effect of pressure boundary rupture rate on spontaneous ignition of pressurized hydrogen release. Journal of Loss Prevention in the Process Industries, 22(3), pp. 279-287. ISSN (print) 0950-4230

Yao, Jun, Yao, Yufeng, Mason, Peter, Zhang, Tao, Heyes, F. J. G. and Roach, P. E. (2009) CFD modelling of water injection for turbine blade cleaning. Modern Physics Letters B, 23(3), pp. 341-344. ISSN (print) 0217-9849

Yao, Jun, Yao, Yufeng, Mason, Peter J and Patel, Mayur K (2009) Numerical simulation of heat transfer in rectangular microchannel. Advances in Applied Mathematics and Mechanics, 1(2), pp. 231-241. ISSN (print) 2070-0733

Yao, Yufeng (2009) Direct simulation of flow interactions in multiple jets in cross-flow. Modern Physics Letters B, 23(3), pp. 249-252. ISSN (print) 0217-9849

Book

Limbachiya, Mukesh C. and Kew, Hsein Y., eds. (2009) Excellence in concrete construction through innovation. London, U.K. : Taylor & Francis. 578p. ISBN 9780415475921

Book Section

Ayan, V., Khavandi, A. and Nikzad Gharehaghaji, A. (2009) In-plant asphalt cold recycling in rehabilitation of Babaei expressway project. In: Loizos, Andreas , Partl, Manfred N. , Scarpas, Tom and Alqadi, Imad L., (eds.) Advanced Testing and Characterization of Bituminous Materials. Wiltshire : Taylor & Francis Group, London. pp. 1169-1178. ISBN 9780415558549

Donchev, T.D., Abouamer, S. and Wertheim, D. (2009) Microscopic analysis of the connection between CFRP laminates and concrete at elevated temperatures. In: Grantham, Michael , Salomoni, Valentina and Majorana, Carmelo, (eds.) Concrete Solutions. London : CRC Press. pp. 57-62. ISBN 9780415550826

Kadhim, M., Donchev, T., Al-Mishhdani, S. and Al-Shaarbaf, I. (2009) Comparison between design codes and procedures for concrete beams with internal FRP reinforcement through innovation. In: Limbachiya, Mukesh C. and Kew, Hsein Y., (eds.) Excellence in concrete construction through innovation. London, U.K. : Taylor & Francis. pp. 413-417. ISBN 9780415475921

Kew, H.Y. and Kenny, M.J. (2009) Developing viable products using recycled rubber tyres in concrete. In: Limbachiya, Mukesh C. and Kew, Hsein Y., (eds.) Excellence in concrete construction through innovation. London, U.K. : Taylor & Francis. pp. 523-531. ISBN 9780415475921

Kew, H.Y., Etebar, K., Limbachiya, M.C. and Kenny, M.J. (2009) Investigation into the potential of rubberised concrete products. In: Limbachiya, Mukesh C. and Kew, Hsein Y., (eds.) Excellence in concrete construction through innovation. London, U.K. : Taylor & Francis. pp. 533-543. ISBN 9780415475921

Petkova, D., Donchev, T. and Wen, J. (2009) FE modelling of the effect of elevated temperatures on the anchoring of CFRP laminates. In: Limbachiya, Mukesh C. and Kew, Hsein Y., (eds.) Excellence in concrete construction through innovation. London, U.K. : Taylor & Francis. pp. 351-355. ISBN 9780415475921

Conference or Workshop Item

Abulrub, Abdul-Hadi G., Sahinkaya, M. Necip and Burrows, Clifford R. (2009) An adaptive weighting control strategy to avoid magnetic bearing contact. In: ASME 2009 Dynamic Systems and Control Conference; 12–14 Oct 2009, Hollywood, California, USA. (ASME 2009 Dynamic Systems and Control Conference) ISBN 9780791848920

Adnan, A, Cazan, A, Safa, M. and Lung, A. W. M. (2009) Guidelines for benchmarking and manufacturing level agreement for outsourcing. In: Advances in Computing and Technology; Jan 2009, London, U.K.. ISBN 9780955000867

Alcantara-Ayala, I., Dykes, A.P. and Garnica-Peña, R.J. (2009) Hurricane Earl, chronicle of a Mexican foretold landslide disaster. In: 7th International Conference on Geomorphology; 06-11 July 2009, Melbourne, Australia.

Bengherbia, T. and Bauer, P. (2009) Numerical investigation of thermally choked ram accelerator in sub-detonative regime. In: 47th AIAA Aerospace Sciences Meeting and The New Horizons Forum and Aerospace Exhibit 2009; 5-8 Jan 2009, Orlando, Florida.

Chan, KinYip, Ordys, Andrzej and Hersi, Adnan (2009) Driver assistance system based on single camera. In: Set for Britain; 09 Mar 2009, London, U.K..

Chau, M., Hoffmann, J., Blundell, M.V., Ordys, A. and Hadavinia, H. (2009) Effect of side-wall reinforcement on energy absorption of thin-wall cylindrical damper. In: 8th International Conference on Fracture and Damage Mechanics; 8-10 Sep 2009, Malta. (Key Engineering Materials, no. 417-418)

Chen, J., Wang, J. and Cassidy, M. (2009) Experiment study and design of moveable partition wall. In: 3rd International Conference on Integrity, Reliability and Failure; 20-24 Jul 2009, Porto, Portugal. (Unpublished)

Chen, Z.B., Dembele, Siaka, Wen, Jennifer and Tam, V.H.Y. (2009) Towards large eddy simulation of LNG pool fires. In: Hazards XXI: Process Safety and Environmental Protection in a Changing World; 10-12 Nov 2009, Manchester, U.K.. ISBN 9780852955369

David-West, O. S., Wang, J., Gault, R. and Cooper, R. (2009) Numerical and experimental based comparison of the dynamic properties of enclosures with and without hole. In: The Sixteenth International Congress on Sound and Vibration; 5-9 July 2009, Krakow, Poland. (Unpublished)

Donchev, Ted (2009) Experimental study of the behaviour of various non-bolted anchorages for CFRP laminates. In: 9th International symposium on fiber reinforced polymer reinforcement for concrete structures; 13-15 July 2009, Sydney, Australia.

Duran, O., Onasoglou, E. and Petrou, M. (2009) Fusion of Kalman filter and anomaly detection for multispectral and hyperspectral target tracking. In: IEEE International Geoscience and Remote Sensing Symposium; 12 - 17 July 2009, Cape Town, South Africa. ISBN 9781424433940

Duran, O. and Petrou, M. (2009) Robust endmember extraction in the presence of anomalies. In: IEEE International Geoscience and Remote Sensing Symposium; 12 - 17 July 2009, Cape Town, South Africa. ISBN 9781424433940

Dykes, A. (2009) Causes and implications of mass movements in peatlands. In: 7th International Conference on Geomorphology; 06-11 July 2009, Melbourne, Australia.

Gault, R., Cooper, R., David-West, O. S., Wang, J. and Tournour, M. (2009) Near-field acoustic holography applied to a loudspeaker pseudo engine source. In: The Sixteenth International Congress on Sound and Vibration; 5-9 July 2009, Krakow, Poland. (Unpublished)

Gault, R., Cooper, R., Boyle, M., Wang, J. and Tournour, M. (2009) A comparative study of near-field acoustic holography and intensity techniques applied to a loudspeaker source. In: The Sixteenth International Congress on Sound and Vibration; 5-9 July 2009, Krakow, Poland. (Unpublished)

Godwin, A, Ordys, A., Francik, J., Smolenski, P, Zienowicz, K., Burley, R, Meng, Chan and Li, Ai (2009) Development of simulation system for lift design. In: International Conference on Systems Engineering; 8 - 10 Sept 2009, Coventry, U.K..

Haroglu, H., Glass, J., Goodchild, C., Minson, A. and Thorpe, T. (2009) Evaluating the main contractors' influence within the concrete frame construction decision making process. In: 11th Annual International fib Symposium: Concrete : 21st Century Superhero; 22 - 24 Jun 2009, London, U.K.. (Unpublished)

Isvandzibaei, M. R., Najafizadeh, M. M. and Khazaeinejad, P. (2009) Influence of symmetrical boundary conditions on free vibration of functionally graded cylindrical shells with ring support. In: ASME 2009 Pressure Vessels and Piping Conference; 26 - 30 Jul 2009, Prague, Czech Republic.

Li, T., Li, Y. and Wang, J. (2009) Innovative form design based on functional attribute. In: 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 17th AIAA/ASME/AHS Adaptive Structures Conference, 11th AIAA Non-Deterministic Approaches Conference, 10th AIAA Gossamer Spacecraft Forum; 4 - 7 May 2009, Palm Springs, California, U.S.. (Unpublished)

Manickam, B., Franke, J., Muppala, S.P.R. and Dinkelacker, F. (2009) LES of triangular-stabilized lean premixed turbulent flames with an algebraic reaction closure: quality and error assessment. In: Quality and Reliability of Large-Eddy Simulations II, QLES2009; 9 - 11 Sep 2009, Pisa, Italy.

Meddah, M Seddik, Sato, R and Suzuki, M (2009) Shrinkage reducing effect of a combination of shrinkage-compensating agents on high-performance concrete. In: Tenth ACI International Conference on Recent Advances in Concrete Technology and Sustainability Issues; 14-16 Oct 2009, Seville, Spain.

Ordys, Andrew, Burley, Richard, Curley, Andrew, Francik, Jaroslaw, Godwin, Adrian and Smolenski, Piotr (2009) A multidisciplinary knowledge transfer partnership in development of lift simulator. In: Innovation through knowledge transfer 2009: research with impact; 02 Dec 2009, East Molesey, U.K..

Rao, V.C.M., Heidari, A, Wen, J.X. and Tam, V.H.Y. (2009) Numerical study of large scale hydrogen explosions and detonation. In: Hazards XXI - Process safety and environmental protection in a changing world; 10-12 Nov 2009, Manchester, UK. ISBN 9780852955369

Sahinkaya, M. N., Abulrub, A. H., Keogh, P. and Burrows, C. (2009) A multiobjective adaptive controller for magnetic bearing systems. In: 54th ASME Turbo Expo 2009; 08 - 12 Jun 2009, Orlando, U.S..

Yao, J., Mouzoun, O., Yao, Y. and Mason, P. (2009) Unsteady RANS calculation of flow over Ahmed car model. In: IUTAM Symposium on Unsteady Separated Flows and their Control; 11 - 22 June 2007, Corfu, Greece. ISBN 9781402098970

Yao, Jun, Yao, Yufeng, Mason, Peter, Zhang, Tao, Heyes, F. J. G. and Roach, P. E. (2009) Simulation of gas water two-phase flow in diesel turbocharger. In: 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion (ISMF2009); 11-15 Jul 2009, Xi'an, China. (Unpublished)

Yao, Yufeng (2009) Direct numerical simulation of multiple jets in cross-flow. In: The Second International Symposium on Physics of Fluids (ISPF2); 9-12 Jun 2008, Jiuzhaigou, China. (Unpublished)

Yao, Yufeng (2009) Effect of hole shape on blade cooling effectiveness. In: World Congress on Engineering 2009 (WCE 2009); 1-3 Jul 2009, London, UK. (Unpublished)

Yao, Yufeng and Castagna, Jony (2009) Numerical study of laminar jet interacting with turbulent cross-flow. In: Sixth International Symposium On Turbulence, Heat and Mass Transfer; 14-18 Sep 2009, Rome, Italy.

Thesis

Ayati, Seyedeh Bentolhoda (2009) Control algorithm for emission tests. (MSc(R) thesis), Kingston University, .

Ghasemnejad, Hessammaddin (2009) Effects of delamination failure in crashworthiness of laminated composite box structures. (PhD thesis), Kingston University, .

Rosário, Ricardo A.F. (2009) Modelling of the behaviour of glazing systems exposed to fires. (PhD thesis), Kingston University, .