A

Afrouzian, Ali, Movahhedi Aleni, Hossein, Liaghat, Gholamhossein and Ahmadi, Hamed (2017) Effect of nano-particles on the tensile, flexural and perforation properties of the glass/epoxy composites. Journal of Reinforced Plastics and Composites, 36(12), pp. 900-916. ISSN (print) 0731-6844

Al-Khudairi, Othman, Hadavinia, Homayoun, Little, Christian, Gillmore, Gavin, Greaves, Peter and Dyer, Kirsten (2017) Full-scale fatigue testing of a wind turbine blade in flapwise direction and examining the effect of crack propagation on the blade performance. Materials, 10(10), p. 1152. ISSN (online) 1996-1944

Almansour, F.A., Dhakal, H.N., Zhang, Z.Y. and Ghasemnejad, H. (2017) Effect of hybridization on the mode II fracture toughness properties of flax/vinyl ester composites. Polymer Composites, 38(8), pp. 1732-1740. ISSN (print) 0272-8397

Ayaz, Beenish, Allen, Alastair and Wiercigroch, Marian (2017) Improving routing performance of underwater wireless sensor networks. In: OCEANS 2017 MTS/IEEE; 19-22 Jun 2017, Aberdeen, U.K..

Azadboni, Reza Khodadadi, Wen, Jennifer X., Heidari, Ali and Wang, Changjian (2017) Numerical modelling of deflagration to detonation transition in inhomogeneous hydrogen/air mixtures. Journal of Loss Prevention in the Process Industries, 49(B), pp. 722-730. ISSN (print) 0950-4230

B

Barra, Giuseppina, Vertuccio, Luigi, Vietri, Umberto, Naddeo, Carlo, Hadavinia, Homayoun and Guadagno, Liberata (2017) Toughening of epoxy adhesives by combined interaction of carbon nanotubes and silsesquioxanes. Materials, 10(10), p. 1131. ISSN (online) 1996-1944

Benedetto, Andrea, Tosti, Fabio, Ciampoli, Luca Bianchini, Calvi, Alessandro, Brancadoro, Maria Giulia and Alani, Amir M. (2017) Railway ballast condition assessment using ground-penetrating radar : an experimental, numerical simulation and modelling development. Construction and Building Materials, 140, pp. 508-520. ISSN (print) 0950-0618

Besseris, George J. (2017) Screening dense and noisy DOX-datasets with NN-blending and "dizzy" swarm intelligence : profiling a water quality process. Swarm and Evolutionary Computation, 37, pp. 219-233. ISSN (print) 2210-6502

Bin Junaid, Ali, Konoiko, Aleksey, Zweiri, Yahya, Sahinkaya, M. Necip and Senevirante, Lakmal (2017) Autonomous wireless self-charging for multi-rotor unmanned aerial vehicles. Energies, 10(6), p. 803. ISSN (online) 1996-1073

Bulat, P. V. and Volkov, K. N. (2017) Solution of two-dimensional Riemann problems using the method of piecewise parabolic reconstruction. Journal of Engineering Physics and Thermophysics, 90(3), pp. 525-534. ISSN (print) 1062-0125

Bulat, P.V., Ilyina, T.E., Volkov, K.N., Silnikov, M.V. and Chernyshov, M.V. (2017) Interaction of a shock wave with an array of particles and effect of particles on the shock wave weakening. Acta Astronautica, 135, pp. 131-138. ISSN (print) 0094-5765

C

Cadavid, M Ospina, Al-Khudairi, O, Hadavinia, H, Goodwin, D and Liaghat, G (2017) Experimental studies of stiffness degradation and dissipated energy in glass fibre reinforced polymer composite under fatigue loading. Polymers and Polymer Composites, 25(6), pp. 435-446. ISSN (print) 0967-3911

Calautit, John Kaiser, Hughes, Ben Richard and Nasir, Diana SNM (2017) Climatic analysis of a passive cooling technology for the built environment in hot countries. Applied Energy, 186(3), pp. 321-335. ISSN (print) 0306-2619

Ciampoli, Luca Bianchini, Tosti, Fabio, Brancadoro, Maria Giulia, D'Amico, Fabrizio, Alani, Amir M. and Benedetto, Andrea (2017) A spectral analysis of ground-penetrating radar data for the assessment of the railway ballast geometric properties. NDT & E International, 90, pp. 39-47. ISSN (print) 0963-8695

D

Domun, Nadiim, Paton, Keith R., Hadavinia, Homayoun, Sainsbury, Toby, Zhang, Tao and Mohamud, Hibaaq (2017) Enhancement of fracture toughness of epoxy nanocomposites by combining nanotubes and nanosheets as fillers. Materials, 10(1179), ISSN (print) 1996-1944

Domun, Nadiim, Hadavinia, Homayoun, Zhang, Tao, Liaghat, Gholamhossein, Vahid, Samireh, Spacie, Chris, Paton, Keith R. and Sainsbury, Toby (2017) Improving the fracture toughness properties of epoxy using graphene nanoplatelets at low filler content. Nanocomposites, 3(3), pp. 85-96. ISSN (print) 2055-0324

E

Emelyanov, V.N., Karpenko, A.G., Kozelkov, A.S., Teterina, I.V., Volkov, K.N. and Yalozo, A.V. (2017) Analysis of impact of general-purpose graphics processor units in supersonic flow modeling. Acta Astronautica, 135, pp. 198-207. ISSN (print) 0094-5765

Emelyanov, V.N., Teterina, I.V., Volkov, K.N. and Garkushev, A.U. (2017) Pressure oscillations and instability of working processes in the combustion chambers of solid rocket motors. Acta Astronautica, 135, pp. 161-171. ISSN (print) 0094-5765

Essa, K., Hassanin, H., Attallah, M.M., Adkins, N.J., Musker, A.J., Roberts, G.T., Tenev, N. and Smith, M. (2017) Development and testing of an additively manufactured monolithic catalyst bed for HTP thruster applications. Applied Catalysis A General, 542, pp. 125-135. ISSN (print) 0926-860X

Essa, Khamis, Modica, Francesco, Imbaby, Mohamed, El-Sayed, Mahmoud Ahmed, ElShaer, Amr, Jiang, Kyle and Hassanin, Hany (2017) Manufacturing of metallic micro components using hybrid soft lithography and micro-electrical discharge machining. The International Journal of Advanced Manufacturing Technology, 91(1-4), pp. 445-452. ISSN (print) 0268-3768

F

Fountas, N. A., Zivkovic, S., Benhadj-Djilali, R., Stergiou, C. I., Majstorovic, V. D. and Vaxevanidis, N. M. (2017) Intelligent dual curve-driven tool path optimization and virtual CMM inspection for sculptured surface CNC machining. In: 5th International Conference on Advanced Manufacturing Engineering and Technologies (NEWTECH); 05 - 09 Jun 2017, Belgrade, Serbia.

Fountas, N. A., Vaxevanidis, N. M., Stergiou, C. I. and Benhadj-Djilali, R. (2017) A virus-evolutionary multi-objective intelligent tool path optimization methodology for 5-axis sculptured surface CNC machining. Engineering with Computers, 33(3), pp. 375-391. ISSN (print) 0177-0667

Fountas, N.A, Stergiou, C.I., Vaxevanidis, N.M. and Benhadj-Djilali, R. (2017) A generic multi-axis post-processor engine for optimal CNC data creation and intelligent surface machining. In: 9th International Congress on Precision Machining; 06 - 09 Sep 2017, Glyfada, Greece. (Submitted)

G

Gaz, Claudio, De Gaetano, Andrea, Manes, Costanzo, Palumbo, Pasquale, Borri, Alessandro and Panunzi, Simona (2017) Effective control of glycemia using a simple discrete-delay model. In: 20th IFAC World Congress; 09 - 14 Jul 2017, Toulouse, France.

Gaz, Claudio and De Luca, Alessandro (2017) Payload estimation based on identified coefficients of robot dynamics - With an application to collision detection. In: 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2017); 24 - 28 Sep 2017, Vancouver, Canada.

Ghazanlou, Siavash Imanian, Farhood, A. H. S., Hosouli, Sahand, Ahmadiyeh, Somayeh and Rasooli, Ali (2017) Pulse frequency and duty cycle effects on the electrodeposited Ni–Co reinforced with micro and nano-sized ZnO. Journal of Materials Science: Materials in Electronics, 28(20), pp. 15537-15551. ISSN (print) 0957-4522

H

Haghbin, Amin, Liaghat, Gholamhossein, Hadavinia, Homayoun, Arabi, Amir Masoud and Pol, Mohammad Hossein (2017) Enhancement of the electrical conductivity and interlaminar shear strength of CNT/GFRP hierarchical composite using an electrophoretic deposition technique. Materials, 10(10), p. 1120. ISSN (online) 1996-1944

Hassanin, Hany, Al-Kinani, Ali, ElShaer, Amr, Polycarpou, Elena, El-Sayed, Mahmoud Ahmed and Essa, Khamis (2017) Stainless steel with tailored porosity using canister-free hot isostatic pressing for improved osseointegration implants. Journal of Materials Chemistry B, 5(47), pp. 9384-9394. ISSN (print) 2050-750X

Hedayatian, M., Liaghat, G.H., Rahimi, Gh, Pol, M.H., Hadavinia, H. and Zamani, R. (2017) Investigation of the high velocity impact behavior of grid cylindrical composite structures. Polymer Composites, 38(11), pp. 2603-2608. ISSN (print) 0272-8397

Heidari, A. and Wen, J. (2017) Numerical simulation of detonation failure and re-initiation in bifurcated tubes. International Journal of Hydrogen Energy, 42(11), pp. 7353-7359. ISSN (print) 0360-3199

I

Irukuvarghula, S., Hassanin, H., Cayron, C., Attallah, M.M., Stewart, D. and Preuss, M. (2017) Evolution of grain boundary network topology in 316L austenitic stainless steel during powder hot isostatic pressing. Acta Materialia, 133, pp. 269-281. ISSN (print) 1359-6454

J

Jiang, Pingfei, Atherton, Mark, Harrison, David and Malizia, Alessio (2017) Framework of mechanical design knowledge representations for avoiding patent infringement. In: 21st International Conference on Engineering Design (ICED17); 21-25 Aug 2017, Vancouver, Canada.

Jouhara, H., Nannou, T., Ghazal, H., Kayyali, R., Tassou, S.A. and Lester, S. (2017) Temperature and energy performance of open refrigerated display cabinets using heat pipe shelves. Energy Procedia, 123, pp. 273-280. ISSN (online) 1876-6102

Juthapakdeeprasert, Jindaporn, Lerdprom, Wirat, Jayaseelan, Doni D. and Lee, William E (2017) Cerium-added alumina and cerium-added zircon as high emissivity coatings for cement rotary kilns. In: Materials Science & Technology Conference and Exhibition; 08-12 Oct 2017, Pittsburgh, U.S..

K

Kalita, Anindita, Chakraborty, Moupali and Biswas, Karabi (2017) A comparative study of polymer coated capacitive sensors for soil moisture sensing. In: 2017 IEEE International Instrumentation and Measurement Technology Conference (I2MTC); 22-25 May 2017, Turin, Italy.

Khodadadi Azadboni, Reza, Heidari, Ali and Wen, Jennifer X. (2017) CFD analysis of deflagration to detonation transition in homogenous and inhomogeneous hydrogen-air mixtures. In: UK Consortium on Turbulent Reacting Flows (UKCTRF) Annual Meeting; 07-08 Sep 2017, Southampton, U.K.. (Unpublished)

Khodadadi Azadboni, Reza, Heidari, Ali and Wen, Jennifer X (2017) Numerical modelling of flame acceleration and transition to detonation in hydrogen/air mixtures with concentration gradient. In: International Conference On Hydrogen Safety (ICHS 2017); 11-13 Sep 2017, Hamburg, Germany. (Unpublished)

Khodadadi Azadboni, Reza, Heidari, Ali, Boeck, Lorenz R. and Wen, Jennifer X. (2017) Numerical study of deflagration-to-detonation transition in homogenous and inhomogeneous hydrogen-air mixtures. In: The International Colloquium on the Dynamics of Explosions and Reactive Systems (ICDERS); 30 Jul – 04 Aug 2017, Boston, U.S.. (Unpublished)

Khodadadi Azadboni, Reza, Wen, Jennifer and Heidari, Ali (2017) A computational fluid dynamic investigation of inhomogeneous hydrogen flame acceleration and transition to detonation. In: 10th Mediterranean Combustion Symposium (MCS-10); 17-21 Sep 2017, Naples, Italy. (Unpublished)

L

Lawrence, David [Speaker] (2017) British Rail designed. In: Late Debate : Designing the Tube; 26 Jan 2017, London, U.K.. (Unpublished)

Ledrdprom, Wirat, Grasso, Salvatore, Jayaseelan, Doni Daniel, Reece, Michael J. and Lee, William E. (2017) Densification behaviour and physicomechanical properties of porcelains prepared using spark plasma sintering. Advances in Applied Ceramics, 116(6), pp. 307-315. ISSN (print) 1743-6753

Lerdprom, Wirat, Zapata-Solvas, Eugenio, Jayaseelan, Doni D., Borrell, Amparo, Salvador, Maria. D. and Lee, William. E. (2017) Impact of microwave processing on porcelain microstructure. Ceramics International, 43(16), pp. 13765-13771. ISSN (print) 0272-8842

Levermore, Thomas (2017) Innovative powertrain control systems for a premium vehicle. (PhD thesis), Kingston University, .

Levermore, Thomas, Sahinkaya, Necip, Zweiri, Yahya and Neaves, Ben (2017) Real-time velocity optimization to minimize energy use in passenger vehicles. Energies, 10(1), p. 30. ISSN (online) 1996-1073

Li, Xiaojian, Liu, Zhengxian and Lin, Yujing (2017) Multi-point and multi-objective optimization of a centrifugal compressor impeller based on genetic algorithm. Mathematical Problems in Engineering, 2017(6263274), ISSN (print) 1024-123X

Li, Yongfeng, Tao, Fei, Cheng, Ying, Zhang, Xianzhi and Nee, A.Y.C. (2017) Complex networks in advanced manufacturing systems. Journal of Manufacturing Systems, 43(3), pp. 409-421. ISSN (print) 0278-6125

Lin, Y., Vadlamani, R., Savill, M. and Tucker, P. (2017) Wall-resolved large eddy simulation for aeroengine aeroacoustic investigation. The Aeronautical Journal, 121(1242), pp. 1032-1050. ISSN (print) 0001-9240

Liu, Jian, Hassanin, Hany, Ni, Zhenyu, Yang, Yi, Yang, Gang and Jiang, Kyle (2017) Production of high precision micro metallic components by electroforming process. Materials and Manufacturing Processes, 32(12), pp. 1325-1330. ISSN (print) 1042-6914

M

Mahmoodian, Mojtaba and Alani, Amir M. (2017) Effect of temperature and acidity of sulphuric acid on concrete properties. Journal of Materials in Civil Engineering, 29(10), ISSN (print) 0899-1561

Marlow, Jack James (2017) Development and characterisation of a dual bi-directional vortex cooling approach to lower the cost of a small liquid bi-propellant rocket engine. (PhD thesis), Kingston University, .

N

Nanayakkara, Visakha K., Cotugno, Giuseppe, Vitzilaios, Nikolaos, Venetsanos, Demetrios, Nanayakkara, Thrishantha and Sahinkaya, M. Necip (2017) The role of morphology of the thumb in anthropomorphic grasping : a review. Frontiers in Mechanical Engineering, 3(5), ISSN (online) 2297-3079

Nasir, Diana S.N.M., Hughes, Ben Richard and Calautit, John Kaiser (2017) A CFD analysis of several design parameters of a road pavement solar collector (RPSC) for urban application. Applied Energy, 186(3), pp. 436-449. ISSN (print) 0306-2619

Nasir, Diana S.N.M., Hughes, Ben Richard and Calautit, John Kaiser (2017) Influence of urban form on the performance of road pavement solar collector system : symmetrical and asymmetrical heights. Energy Conversion and Management, 149, pp. 904-917. ISSN (print) 0196-8904

P

Papathanasiou, T K, Markolefas, S, Khazaeinejad, P and Bahai, H (2017) An efficient structural finite element for inextensible flexible risers. IOP Conference Series : Materials Science and Engineering, 276(1), 012023. ISSN (print) 1757-8981

Papathanasiou, Theodosios, Khazaeinejad, Payam and Bahai, Hamid (2017) Finite element analysis of heat transfer in thin multilayered plates. In: UK Heat Transfer Conference (UKHTC2017); 04 - 05 Sep 2017, London, U.K.. (Unpublished)

R

Rayner, Robert M.C., Sahinkaya, M. Necip and Hicks, Ben (2017) Improving the design of high speed mechanisms through multi-level kinematic synthesis, dynamic optimization and velocity profiling. Mechanism and Machine Theory, 118, pp. 100-114. ISSN (print) 0094-114X

S

Sabouri, Aydin, Yetisen, Ali K., Sadigzade, Rashad, Hassanin, Hany, Essa, Khamis and Butt, Haider (2017) Three-dimensional microstructured lattices for oil sensing. Energy & Fuels, 31(3), pp. 2524-2529. ISSN (print) 0887-0624

Shahzad, Sally, Calautit, John Kaiser, Aquino, Angelo I., Mohd Nasir, Diana SNM and Hughes, Ben Richard (2017) Neutral thermal sensation or dynamic thermal comfort? Numerical and field test analysis of a thermal chair. In: 9th International Conference on Applied Energy (ICAE 2017); 21 - 24 Aug 2017, Cardiff, U.K..

Shahzad, Sally, Calautit, John Kaiser, Aquino, Angelo I., Nasir, Diana S.N.M. and Hughes, Ben Richard (2017) A user-controlled thermal chair for an open plan workplace : CFD and field studies of thermal comfort performance. Applied Energy, 207, pp. 283-293. ISSN (print) 0306-2619

Shanazari, H, Liaghat, GH, Feli, S and Hadavinia, H (2017) Analytical and experimental study of high-velocity impact on ceramic/nanocomposite targets. Journal of Composite Materials, 51(27), pp. 3743-3756. ISSN (print) 0021-9983

Shi, Zhenyu and Zhang, Xianzhi (2017) Contact angle hysteresis analysis on superhydrophobic surface based on the design of channel and pillar models. Materials & Design, 131, pp. 323-333. ISSN (print) 0264-1275

Shi, Zhenyu, Zhao, Tianming, Wan, Yi and Zhang, Xianzhi (2017) Development of a micropump composed of three gears with Logix tooth profiles fabricated by micromilling technology. The International Journal of Advanced Manufacturing Technology, 92(1-4), pp. 1507-1517. ISSN (print) 0268-3768

W

Wright, Kourtney D., Gowenlock, Cathren E., Bear, Joseph C. and Barron, Andrew R. (2017) Understanding the effect of functional groups on the seeded growth of copper on carbon nanotubes for optimizing electrical transmission. ACS Applied Materials & Interfaces, 9(32), pp. 27202-27212. ISSN (print) 1944-8244