Article

Al-Khazali, H. A. H. and Askari, M. R. (2011) Experimental technique to investigate vibration monitoring in revolving structures using oscilloscopic/modal testing. International Journal of Engineering Science and Technology, 3(10), pp. 7799-7814. ISSN (online) 0975-5462

Al-Khazali, H.A. and Askari, M.R. (2011) Accurate identification of performance for rotor-bearing systems using the modified modelling under gyroscopic effect. International Journal of Modern Engineering Research, 1(2), pp. 527-537. ISSN (online) 2249-6645

Al-Khazali, H.A. and Askari, M.R. (2011) Modal analysis design to exposure gyroscopic effect in rotating machinery using experimental and analytical/computational techniques. International Journal of Engineering Science and Technology, 3(9), pp. 7234-7243. ISSN (online) 0975-5462

Al-Khazali, Hisham A. and Askari, Mohamad R. (2011) Computer simulation to investigate system identification and vibration monitoring in rotor dynamic analysis. International Journal of Advances in Science and Technology, 3(4), pp. 1-15. ISSN (print) 2229-5216

Bengherbia, T., Yao, Y. F., Bauer, P. and Knowlen, C. (2011) Numerical study of gaseous reactive flow over a ram accelerator projectile in subdetonative velocity regime. European Physical Journal - Applied Physics (The), 55(1), 11102 -11113. ISSN (print) 1286-0042

Bengherbia, Tarek, Yao, Yufeng, Bauer, Pascal, Giraud, Marc and Knowlen, Carl (2011) Improved one-dimensional unsteady modelling of thermally choked ram accelerator in sub-detonative velocity regime. Journal Of Applied Mechanics, 78(5), 051004. ISSN (print) 0021-8936

Cui, Bai, Jayaseelan, Daniel Doni and Lee, William Edward (2011) Microstructural evolution during high-temperature oxidation of Ti2AlC ceramics. Acta Materialia, 59(10), pp. 4116-4125. ISSN (print) 1359-6454

Cui, Bai, Jayaseelan, Daniel Doni and Lee, William Edward (2011) Reply to comment on "Microstructural evolution during high-temperature oxidation of Ti[sub]2AlC ceramics". Scripta Materialia, 65(10), pp. 933-934. ISSN (print) 1359-6462

David-West, O. S., Wang, J. and Cooper, R. (2011) Model updating of an enclosure using imaginary elements. Applied Mechanics and Materials, 70, pp. 309-314. ISSN (print) 1662-7482

David-West, O. S., Banks, W. M. and Pethrick, R. A. (2011) A study of the effect of strain rate and temperature on the characteristics of quasi-unidirectional natural fibre-reinforced composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 225(L3), pp. 133-148. ISSN (print) 1464-4207

Deng, Jiamei, Maass, Bastian, Stobart, Richard, Winward, Edward and Yang, Zhijia (2011) Accurate and continuous fuel flow rate measurement prediction for real time application. SAE International Journal of Engines, 4(1), pp. 1724-1737. ISSN (print) 1946-3936

Dinkelacker, F., Manickam, B. and Muppala, S.P.R. (2011) Modelling and simulation of lean premixed turbulent methane/hydrogen/air flames with an effective Lewis number approach. Combustion and Flame, 158(9), pp. 1742-1749. ISSN (print) 0010-2180

Duran, Olga and Petrou, Maria (2011) Robust endmember extraction in the presence of anomalies. IEEE Transactions on Geoscience and Remote Sensing, 49(6), pp. 1986-1996. ISSN (print) 0196-2892

Elmarakbi, Ahmed, Fielding, Niki and Hadavinia, Homayoun (2011) Finite element simulation of axial crush of thin-walled tubes with different cross-sections: vehicle/pole impact applications. International Journal of Vehicle Structures and Systems, 3(3), ISSN (print) 0975-3060

Ghasemnejad, H., Occhineri, L. and Swift-Hook, D.T. (2011) Post-buckling failure in multi-delaminated composite wind turbine blade materials. Materials & Design, 32(10), pp. 5106-5112. ISSN (print) 0264-1275

Ghasemnejad, Hessammaddin (2011) Avoid catastrophic failure in wind turbine blades: a study of delamination under various loading conditions. Windtech International, ISSN (print) 1574-2415

Ghasemnejad, Hessammaddin and Aboutorabi, Akbar (2011) Cohesive zone modeling (CZM) in prediction of delamination failure in laminated composite structures. Journal of Materials Science and Engineering, 5(1), pp. 61-64. ISSN (print) 1934-8959

Ginzinger, L., Sahinkaya, M. N., Heckmann, B., Keogh, P. and Ulbrich, H. (2011) On the optimization problem of model-based monitoring. Science China Technological Sciences, 54(5), pp. 1095-1106. ISSN (print) 1674-7321

Hadavinia, H. and Elmarakbi, A. (2011) Special issue on structural impact and crashworthiness: part I a preface. International Journal of Vehicle Structures and Systems, 3(2), ii. ISSN (print) 0975-3060

Hadavinia, Homayoun, Dogan, Fatih, Elmarakbi, Ahmed and Khalili, S.M.R. (2011) Modelling of low velocity impact of laminated composite substructures. International Journal of Vehicle Structures and Systems, 3(2), pp. 96-106. ISSN (print) 0975-3060

Horikiri, Kana, Yao, Yufeng and Yao, Jun (2011) Numerical simulation of convective airflow in an empty room. International Journal of Energy and Environment, 4(5), pp. 574-581. ISSN (print) 2308-1007

Ives, Anthony O., Wang, Jian, Raghunathan, Srinivasan and Sloan, Patrick (2011) Heat transfer through a idealised bias flow acoustic liner. Journal of Thermophysics and Heat Transfer, 25(3), pp. 404-423. ISSN (print) 0887-8722

Ives, Anthony O., Wang, Jian, Raghunathan, Srinivasan and Sloan, Patrick (2011) Heat transfer through a single hole bias flow acoustic liner. Journal of Thermophysics and Heat Transfer, 25(3), pp. 409-423. ISSN (print) 0887-8722

Jackson, Heather F., Jayaseelan, Daniel D., Manara, Dario, Casoni, Carlo Perinetti and Lee, William E. (2011) Laser melting of zirconium carbide : determination of phase transitions in refractory ceramic systems. Journal of the American Ceramic Society, 94(10), pp. 3561-3569. ISSN (print) 0002-7820

Laila, Dina Shona, Lovera, Marco and Astolfi, Alessandro (2011) A discrete-time observer design for spacecraft attitude determination using an orthogonality-preserving algorithm. Automatica, 47(5), pp. 975-980. ISSN (print) 0005-1098

Pereira, J., Tam, V., Ghasemnejad, H., Shariff, H., Wen, J. and Donchev, T. (2011) Numerical and experimental investigations on the blast resistance of lightweight metal boxes. FABIG Newsletter(57),

Rezapour, Shabnam, Zanjirani Farahani, Reza and Miandoabchi, Elnaz (2011) A machine-to-loop assignment and layout design methodology for tandem AGV systems with single-load vehicles. International Journal of Production Research, 49(12), pp. 3605-3633. ISSN (print) 0020-7543

Sahinkaya, M. Necip, Abulrub, Abdul-Hadi G., Keogh, Patrick S. and Burrows, Clifford R. (2011) Experiments on the transient performance of an adaptive multi-objective controller for rotating machinery. Journal Of Engineering For Gas Turbines And Power, 133(2), ISSN (print) 0742-4795

Sahinkaya, M. Necip, Abulrub, Abdul-Hadi G. and Burrows, Clifford R. (2011) An adaptive multi-objective controller for flexible rotor and magnetic bearing systems. Journal Of Dynamic Systems, Measurement, And Control, 133(3), ISSN (print) 0022-0434

Singh, Harjit and Eames, Philip C. (2011) A review of natural convective heat transfer correlations in rectangular cross-section cavities and their potential applications to compound parabolic concentrating (CPC) solar collector cavities. Applied Thermal Engineering, 31(14-15), pp. 2186-2196. ISSN (print) 1359-4311

Wang, Changjian and Guo, Jin (2011) Computer simulation of liquid jet fire with various injection conditions. Procedia Engineering, 15, pp. 3942-3947. ISSN (print) 1877-7058

Wang, Changjian, Yan, Weigang, Guo, Jin and Guo, Changming (2011) Parallel computation of three dimensional gaseous detonation waves. Information: an international interdisciplinary journal, 14(3), pp. 893-898. ISSN (print) 1343-4500

Wen, J.X., Heidari, A., Ferraris, S. and Tam, V.H.Y. (2011) Numerical simulation of propane detonation in medium and large scale geometries. Journal of Loss Prevention in the Process Industries, 24(2), pp. 187-193. ISSN (print) 0950-4230

Yao, J and Yao, Y F (2011) Computational study of hole shape effect on film cooling performance. Journal Of Power And Energy - Part A, 225(4), pp. 505-519. ISSN (print) 0957-6509

Yao, Y. and Maidi, M. (2011) Direct numerical simulation of single and multiple square jets in cross-flow. Journal of Fluids Engineering, 133(3), 031201. ISSN (print) 0098-2202

Yao, Yufeng, Salin, Andrea and Lo, Sing H. (2011) Numerical analysis of wall properties in crossing-shock-wave/turbulent-boundary-layer interactions. AIAA Journal, 2011(860), ISSN (print) 0001-1452

Yao, Yufeng and Yao, Jun (2011) The effect of hole shape on blade cooling effectiveness. International Journal of Engineering Systems Modelling and Simulations, 2(4), pp. 242-248. ISSN (print) 1755-9758

Zhang, T., Bao, Y., Gawne, D.T. and Mason, P.J. (2011) Effect of a moving flame on the temperature of polymer coatings and substrates. Progress in Organic Coatings, 70(1), pp. 45-51. ISSN (print) 0300-9440

Zhu, X, Zhang, T., Marchant, D. and Morris, V. (2011) The structure and properties of NiAl formed by SHS using induction heating. Materials Science and Engineering A, 528(3), pp. 1251-1260. ISSN (print) 0921-5093

Book

Ueno, Satoshi and Sahinkaya, Mehmet (2011) Adaptive bias current control in active magnetic bearings for energy optimization. American Society of Mechanical Engineers. (2011 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC2011)-Volume 1, Parts A & B, (47868))

Book Section

Wang, Changjian, Yan, Weigang, Guo, Jin and Guo, Changming (2011) Computer simulation of blast wall protection under methane-air explosion on an offshore platform. In: Chen, Ran, (ed.) Intelligent Computing and Information Science. Berlin Heidelberg : Springer. pp. 321-326. (Communications in Computer and Information Science, (135)) ISBN 9783642181337

Conference or Workshop Item

Aghajani, Hamed, Dembele, Siaka and Wen, Jennifer (2011) Modeling sprinkler sprays. In: FM Global Open Source CFD Fire Modelling Workshop 2011; 9-10 May 2011, Norwood, USA. (Unpublished)

Al-Khazali, H. and Askari, M. (2011) Condition monitoring and fault diagnosis in rotating machinery using modal test & finite element analysis. In: The 4th International Conference: Computational Mechanics and Virtual Engineering COMEC 2011; 20-22 Oct 2011, Brasov, Romania. (Unpublished)

Al-Khazali, H. A. H. and Askari, M. R. (2011) Application of modal testing and finite element modelling in rotating structures. In: 2nd International Conference on Modelling and Simulations (ICOMOS - VF) Virtual Forum 2011; 11-25 Jul 2011, Naples, Italy. (Unpublished)

Al-Khazali, H.A.H. and Askari, M.R. (2011) Detection of gyroscopic effect in rotating machinery from the modal data. In: National Symposium on Rotordynamics (NSRD-2011); 19-21 Dec 2011, Madras, India. (Unpublished)

Al-Khazali, H.A.H. and Askari, M.R. (2011) Validation of modal data in rotating machinery using finite element analysis. In: ICAST 2011, 22nd International conference on adaptive structures and technologies, University of Patras, Greece; 10-12 Oct 2011, Corfu, Greece. (Unpublished)

Al-Khazali, Hisham (2011) Establish a system identification methodology of modal testing using the analytical/computational techniques in rotating machinery. In: 2011 ANSYS UK User Conference; 09 Nov 2011, Gaydon, U.K.. (Unpublished)

Al-Khazali, Hisham Ahmad Humadi (2011) Balancing in rotating machinery using system identification/modal analysis. In: Faculty of Science, Engineering and Computing Research Seminar; 30 Nov 2011, London, U.K.. (Unpublished)

Al-Khazali, Hisham Ahmad Humadi (2011) Discover gyroscopic effect in rotating structures using experimental modal analysis and finite element data. In: Conference of Engineering Sciences; 01-02 Oct 2011, London, UK. (Unpublished)

Bengherbia, Tarek, Yao, Yufeng, Bauer, Pascal, Giraud, Marc and Knowlen, Carl (2011) Improved one-dimensional unsteady modeling of thermally choked ram accelerator in sub-detonative velocity regime. In: 26th International Symposium on Ballistics; 12-16 Sep 2011, Miami, USA. (Unpublished)

Chen, Z.B., Wen, J.X., Xu, B.P. and Dembele, S. (2011) The extension of the eddy dissipation concept (EDC) to the LES framework in FireFOAM. In: FM Global Open Source CFD Fire Modeling Workshop; 9-10 May 2011, Norwood, USA. (Unpublished)

Chen, Zhibin, Wen, Jennifer, Xu, Baopeng and Dembele, Siaka (2011) Large eddy simulation of fire dynamics with the improved eddy dissipation concept. In: 10th International IAFSS Symposium; 19-24 June 2011, Maryland, USA. (Unpublished)

David-West, O. S., Wang, J and Cooper, R. (2011) Model updating of an enclosure using imaginary elements. In: EMex 2011, the BSSM’s annual Exhibition of Experimental Mechanics; 7-9 September 2011, Edinburgh, UK.. (Submitted)

David-West, O. S., Wang, J. and Cooper, R. (2011) Model updating of an enclosure using imaginary elements. In: 8th International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation for Validation; 7-9 Sep 2011, Edinburgh, Scotland. (Unpublished)

Ghafari-Namini, N., Ghasemnejad, H. and Limbachiya, M. (2011) Advanced finite element analysis to predict off-axis crushing behaviour of composite aero-structures. In: 10th International Conference on Fracture and Damage Mechanics; 19 - 21 Sep 2011, Dubrovnik, Croatia.

Ghasemnejad, H., Thomas, V. and Hadavinia, H. (2011) Mixed-mode delamination failure of z-pinned hybrid laminated composites. In: 9th International Conference on Fracture and Damage Mechanics; 20-22 Sep 2010, Nagasaki, Japan. (Key Engineering Materials, no. 452-453) ISSN (print) 1013-9826

Ghasemnejad, Hessam and Weager, B. (2011) Damage resistance of natural z-pinned composite lap-joints under impact loading. In: Ecocomp 2011: 4th International Conference on Sustainable Materials, Polymers and Composites; 06 - 07 Jul 2011, Birmingham, U.K.. (Unpublished)

Heidari, A. and Wen, J.X. (2011) Flame acceleration and transition from deflagration to detonation in hydrogen explosions. In: 4th International Conference on Hydrogen Safety, ICHS; 12 - 14 Sept 2011, San Francisco, U.S.A..

Khazaeinejad, P., Najafizadeh, M.M. and Wang, X.H. (2011) Buckling of functionally graded toroidal shells under external pressure. In: ICCS16 : 16th International Conference on Composite Structures; 28 - 30 Jun 2011, Porto, Portugal. (Unpublished)

Lappas, V., Pottinger, S., Knoll, A., Shaw, P., Lamprou, D., Harle, T., Melly, B. and Perren, M. (2011) Micro-electric propulsion (EP) solutions for small satellite missions. In: 2011 2nd International Conference on Space Technology; 15-17 Sep 2011, Athens, Greece.

Occhineri, Lorenzo, Ghasemnejad, Hessam and Mirzaii, Hossein (2011) Use of natural Flax yarn to control post-buckling failure in multi-delaminated HAWT blade sub-structures. In: EWEA2011; 14-17 Mar 2011, Brussels, Belgium. (Unpublished)

Raju, V, Balu, K, Collier, G and Duran, O (2011) Automated testing of satellite data configuration modules using Labview. In: 2nd International Conference on Space Technology; 15 - 17 Sept 2011, Athens, Greece.

Salin, A., Yao, Y. and Lo, S. (2011) Flow topology of symmetric crossing shock wave boundary layer interactions. In: 28th International Symposium on Shock Waves (ISSW 28); 17 - 22 Jul 2011, Manchester, U.K.. (Submitted)

Shakouri, P. and Ordys, A. (2011) Application of the state-dependent nonlinear model predictive control in adaptive cruise control system. In: 14th International IEEE Conference on Intelligent Transportation Systems (ITSC); 5-7 October 2011, Washington, DC, USA. (IEEE International Conference on Intelligent Transportation Systems) ISSN (print) 2153-0009 ISBN 9781457721984

Shaw, P., Lappas, V. and Underwood, C. (2011) Development of the μPPT propulsion module for STRaND a 3U CubeSat. In: 1st IAA Conference on University Satellites Missions and CubeSat Workshop in Europe; 24-29 Jan 2011, Rome, Italy.

Shaw, P. and Lappas, VJ. (2011) A high current cathode plasma jet flow model for the pulsed plasma thruster. In: 32nd International Electric Propulsion Conference; 11-15 Sep 2011, Wiesbaden, Germany.

Shaw, P. V., Lappas, V. J. and Underwood, C. I. (2011) Design, development and evaluation of an 8 μPPT propulsion module for a 3U CubeSat application. In: 32nd International Electric Propulsion Conference; 11-15 Sep 2011, Wiesbaden, Germany.

Soroush, V.R., Ghasemnejad, Hessam, Marchant, D.R. and Aboutorabi, A. (2011) Advanced application of natural fibres in high performance automotive composite structures. In: The Nineteenth Annual International Conference on COMPOSITES/NANO ENGINEERING (ICCE-19); 24 - 30 Jul 2011, Shanghai, China. (Unpublished)

Volkov, K (2011) Interaction of laser pulse with liquid droplet. In: 28th International Symposium on Shock Waves; 17-22 July 2011, Manchester, UK. (Unpublished)

Volkov, K.N. and Emelyanov, V.N. (2011) Large-eddy simulation of turbulence-induced aero-optic effects in free shear flows. In: 13th European Turbulence Conference (ETC13): Statistical aspects, modelling and simulations of turbulence; 12-15 Sept 2011, Warsaw, Poland. (Journal of Physics Conference Series, no. 318) ISSN (print) 1742-6588

Wen, Jennifer, Xu, Baopeng, Jie, Hongen, Cooper, Russel and Barnet, Julian (2011) Numerical study of compressed CO2 pipeline decompression characteristics using CFD-DECOM. In: Hazards XXII - process safety and environmental protection; 11-14 Apr 2011, Liverpool, U.K.. (Institution of Chemical Engineers Symposium Series, no. 156) ISBN 9781622767892

Yao, Y., Salin, A and Lo, S. (2011) Numerical analysis of wall properties in crossing-shock-qave/turbulent-boundary-layer interactions. In: 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition; 4 - 7 Jan 2011, Orlando, U.S.A..

Zia, M.T, Curley, A., Duran, O. and Razmkhah, O. (2011) Application of LabView and cRIO for high precision positioning of Mars Rover using DC motors. In: 2nd International Conference on Space Technology (ICST 2011); 15-17 Sep 2011, Athens, Greece. (Unpublished)

Thesis

Adnan, Adnan (2011) Development of outsourcing decision models for small and medium sized manufacturing companies. (PhD thesis), Kingston University, .

Shaw, Peter Vallis (2011) Pulsed plasma thrusters for small satellites. (PhD thesis), University of Surrey, .