A

Aboutorabi, A., Ghasemnejad, H. and Hadavinia, H. (2010) Analytical approach for progressive failure crushing modes of woven FRP composite box structures. World Journal of Engineering, 7(3), pp. 154-162. ISSN (print) 1708-5284

B

Bell, M, Cooper, R., Houston, G. and Wang, J (2010) Numerical modelling of acoustic sources. In: RAeS Aerodynamics Conference Applied Aerodynamics: Capabilities and Future Requirements; 27-28 Jul 2010, Bristol, U.K..

Bengherbia, T., Bauer, P., Yao, Y. and Knowlen, C. (2010) One-dimensional performance modelling of the ram accelerator in subdetonative regime. Journal of Aerospace Science, Technologies and Systems, 88(1), pp. 3-13.

Bengherbia, T., Yao, Y., Bauer, P. and Knowlen, C. (2010) Thrust prediction in thermally choked ram accelerator. In: AIAA 48th Aerospace Sciences Meeting; 04-07 Jan 2010, Orlando, FL, USA.

Bengherbia, Tarek, Yao, Yufeng, Bauer, Pascal and Knowlen, Carl (2010) Equations of state for 1-D modelling of ram accelerator thrust in thermally choked propulsion mode. International Journal of Engineering Systems Modelling and Simulations, 2(3), pp. 154-161. ISSN (print) 1755-9758

C

Cade, Iain S., Sahinkaya, M. Necip, Burrows, Clifford R. and Keogh, Patrick S. (2010) An active auxiliary bearing control strategy to reduce the onset of asynchronous periodic contact modes in rotor/magnetic bearing systems. Journal of Engineering for Gas Turbines and Power, 132(5),

Cade, Lain S., Sahinkaya, M. Necip, Burrows, Clifford R. and Keogh, Patrick S. (2010) Destabilization of forward rub in rotor magnetic bearing systems using actively controlled auxiliary bearings. In: UNSPECIFIED, (ed.) ASME Turbo Expo 2010: Power for Land, Sea, and Air. New York, U.S.A. : American Society of Mechanical Engineers. pp. 273-282. 6 ISBN 9780791844014

Calabria A., Juliana, Vasconcelos, Wander L., Daniel, Doni J., Chater, Richard, McPhail, David and Boccaccini, Aldo R. (2010) Synthesis of sol–gel titania bactericide coatings on adobe brick. Construction and Building Materials, 24(3), pp. 384-389. ISSN (print) 0950-0618

Castagna, Jony and Yao, Yufeng (2010) Development of a multi-block high-order DNS code for turbulent flow simulations. IOP Conference Series: Materials Science and Engineering, 10(012027), ISSN (print) 1757-8981

Castagna, Jony and Yao, Yufeng (2010) Development of a multi-block high-order DNS code for turbulent flow simulations. In: 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics; 19-23 Jul 2009, Sydney, Australia. (Unpublished)

Chan, K Y, Ordys, A. and Duran, O (2010) A system to measure gap distance between two vehicles using license plate character height. In: Bolc, Leonard , Tadeusiewicz, Ryszard , Chmielewski, Leszek J. and Wojciechowski, Konrad, (eds.) Computer Vision and Graphics: International Conference, ICCVG 2010 Warsaw, Poland, September 2010 Proceedings, Part 1. Berlin, Germany : Springer. pp. 249-256. (Lecture Notes in Computer Science, 1(6374)) ISSN (print) 0302-9743 ISBN 9783642159091

Chang, N., Yang, W., Wang, J. and Wang, W. (2010) Design optimization of composite wing box for flutter and stiffness. In: 48th AIAA Aerospace Sciences Meeting, Including the New Horizons Forum and Aerospace Exposition; 4 - 7 Jan 2010, Orlando, Florida, U.S.. (Unpublished)

Chang, N., Wang, W., Yang, W. and Wang, J. (2010) Ply stacking sequence optimization of composite laminate by permutation discrete particle swarm optimization. Structural and Multidisciplinary Optimization, 41(2), pp. 179-187. ISSN (print) 1615-147X

Chau, M., Hoffmann, Joerg, Blundell, M.V., Ordys, A. and Hadavinia, H. (2010) Effect of side-wall reinforcement on energy absorption of thin-wall cylindrical damper. Key Engineering Materials, 417-18, pp. 785-788. ISSN (print) 1013-9826

D

David-West, O. S., Wang, J. and Cooper, R. (2010) Finite element model updating of a thin wall enclosure under impact excitation. Applied Mechanics and Materials, 24-25, pp. 337-342. ISSN (print) 1660-9336

Dembele, S., Rosario, R.A.F., Wang, Q.S., Warren, P.D. and Wen, J.X. (2010) Thermal and stress analysis of glazing in fires and glass fracture modeling with a probabilistic approach. Numerical Heat Transfer Part B, 58(6), pp. 419-439. ISSN (print) 1040-7790

Dogan, Faith, Hadavinia, Homayoun, Barton, Stephen J and Mason, Peter J. (2010) Applications of intrinsically conducting polymers. Recent Patents on Mechanical Engineering, 3(3), pp. 174-182. ISSN (print) 2212-7976

G

Gao, J., Zhang, T., Bao, Y. and Gawne, D.T. (2010) Plasma-scan sintering of aluminosilicate sol-gel films. Journal of the European Ceramic Society, 30(4), pp. 847-855. ISSN (print) 0955-2219

Ghasemnejad, H. and Maheri, A, (2010) Buckling analysis for design of horizontal axis wind turbine (HAWT) composite blades. In: Composites UK 10th Annual Conference: Innovation in Composites; 05 - 06 May 2010, Birmingham, U.K.. (Unpublished)

Ghasemnejad, H. and Aboutorabi, A. (2010) Cohesive zone modelling of Mode-I & Mode-II interlaminar crack propagation in laminated composite. In: ICCE-18; 04 - 10 July 2010, Anchorage, Alaska, U.S..

Ghasemnejad, H., Hadavinia, H. and Aboutorabi, A. (2010) Effect of delamination failure in crashworthiness analysis of hybrid composite box structures. Materials & Design, 31(3), pp. 1105-1116. ISSN (print) 0264-1275

Gohar, R. and Safa, M. (2010) Fluid film lubrication. In: Rahnejat, H., (ed.) Tribology and dynamics of engine and powertrain. Cambridge, U.K. : Woodhead Publishing. pp. 132-170. ISBN 9781845693619

Gohar, R. and Safa, M. (2010) Measurement of contact pressure under elastohydrodynamic lubrication conditions. In: Rahnejat, H., (ed.) Tribology and dynamics of engine and powertrain. Cambridge, U.K. : Woodhead Publications. pp. 222-245. ISBN 9781845693619

I

Inam, Fawad, Yan, Haixue, Jayaseelan, Daniel D., Peijs, Ton and Reece, Michael J. (2010) Electrically conductive alumina–carbon nanocomposites prepared by Spark Plasma Sintering. Journal of the European Ceramic Society, 30(2), pp. 153-157. ISSN (print) 0955-2219

Iravani, P. and Sahinkaya, M. N. (2010) Variable-velocity exponential input shaping for position controlled robotic systems. In: UNSPECIFIED, (ed.) ASME 2010 Dynamic Systems and Control Conference. Massachusetts, U.S. : American Society of Mechanical Engineers. pp. 345-351. 2 ISBN 9780791844182

Izzard, Vanessa, Bradsell, Colin, Hadavinia, H., Morris, Valerie, Foot, P.J.S. and Witten, N. (2010) Investigation of the compression recovery properties of Polyamide-6 cellular solid over the temperature range of -5[degrees]C to 90[degrees]C. Key Engineering Materials, 417-18, pp. 933-936. ISSN (print) 1013-9826

J

Jackson, Heather F., Jayaseelan, Daniel D., Lee, William E., Reece, Michael J., Inam, Fawad, Manara, Dario, Casoni, Carlo Perinetti, De Bruycker, Franck and Boboridis, Konstantinos (2010) Laser melting of spark plasma-sintered zirconium carbide : thermophysical properties of a generation IV very high-temperature reactor material. International Journal of Applied Ceramic Technology, 7(3), pp. 316-326. ISSN (print) 1546-542X

Jayaseelan, D.D., Jackson, H., Eakins, E., Brown, P. and Lee, W.E. (2010) Laser modified microstructures in ZrB[sub]2, ZrB[sub]2/SiC and ZrC. Journal of the European Ceramic Society, 30(11), pp. 2279-2288. ISSN (print) 0955-2219

Jenabi, J. and Khazaeinejad, P. (2010) The effect of combined loading on buckling loads of functionally graded cylindrical shells surrounded by an elastic medium. In: 2nd International Conference Topical Problems of Continuum Mechanics (TPCM2010); 04 - 08 Oct 2010, Dilijan, Armenia. (Unpublished)

K

Khalili, S. M. R., Tavakolian, M. and Sarabi, A. (2010) Mechanical properties of nanoclay reinforced epoxy adhesive bonded joints made with composite materials. In: 3rd International Conference of Adhesion Science and Technology on Advanced Computational Engineering and Experimenting (ACE-X 2009); 22-23 Jun 2009, Rome, Italy. (Unpublished)

Khalili, S.M.R., Ghaja, R., Sadeghinia, M, Mittalc, R. K. and Mason, P. (2010) Effect of patching on charpy impact response of repaired notched plate - Experimental study. Journal of Adhesion, 86(5 & 6), pp. 561-585. ISSN (print) 0021-8464

Khazaeinejad, P and Najafizadeh, M M (2010) Mechanical buckling of cylindrical shells with varying material properties. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224(8), pp. 1551-1557. ISSN (print) 0954-4062

Khazaeinejad, P., Najafizadeh, M.M., Wang, X.H. and Tanbakuei Kashani, M. (2010) FEM buckling analysis of functionally graded toroidal shells. In: The Second Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2010); 22 - 25 Oct 2010, Nanjing, China. (Unpublished)

Khazaeinejad, P., Najafizadeh, M. M., Jenabi, J. and Isvandzibaei, M. R. (2010) On the buckling of functionally graded cylindrical shells under combined external pressure and axial compression. Journal of Pressure Vessel Technology, 132(6), 064501. ISSN (print) 0094-9930

L

Laila, Dina Shona (2010) A note on human body weight dynamics and control based on the macronutrient and energy flux balance. In: 2010 American Control Conference (ACC); 30 Jun - 2 Jul 2010, Baltimore, Maryland, USA. (Unpublished)

Li, Wenqiang, Li, Yan, Wang, Jian and Liu, Xiaoying (2010) The process model to aid innovation of products conceptual design. Expert Systems with Applications, 37(5), pp. 3574-3587. ISSN (print) 0957-4174

Lima, Kwenda L. Merkel (2010) Development and assessment of an unstructured discrete ordinates method for radiative heat transfer in non-gray media. (PhD thesis), Kingston University, .

Liu, J., Zhang, T., Bao, Y. and Gawne, D.T. (2010) Sintering behaviour of glass-silicon nitride composites for thermal spray precursor powders. Advances in Applied Ceramics: Structural, Functional and Bioceramics Journal - Advances in Psychiatric Treatment, 109(2), pp. 71-78. ISSN (print) 1743-6753

Lu, Zhenzhou, Song, Jun, Song, Shufang, Yue, Zhufeng and Wang, Jian (2010) Reliability sensitivity by method of moments. Applied Mathematical Modelling, 34(10), pp. 2860-2871. ISSN (print) 0307-904X

M

Maleki, A, Donchev, T., Hadavinia, H. and Cheah, A (2010) Behaviour of steel shear wall systems with cut-outs and stiffeners. In: International Conference on Structures & Architecture; 21 -23 July 2010, Guimaraes, Portugal. ISBN 9780415492492

N

Najafizadeh, M M, Mahdavian, M and Khazaeinejad, P (2010) Superposition buckling analysis of rectangular plates composed of functionally graded materials subjected to non-uniform distributed in-plane loading. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224(11), pp. 2299-2307. ISSN (print) 0954-4062

Nasr Esfahani, M M, Ghasemnejad, H and Barrington, P E (2010) Experimental and numerical buckling analysis of delaminated hybrid composite beam structures. In: 7th BSSM International Conference on Advances in Experimental Mechanics; 07 - 09 Sep 2010, Liverpool, U.K..

P

Pang, Bo, McPhail, David S., Jayaseelan, Daniel Doni and Boccaccini, Aldo Roberto (2010) Development and characterization of transparent glass matrix composites. Advances in Science and Technology, 71, pp. 102-107. ISSN (print) 1662-8969

Petkova, Diana (2010) Behaviour of RC beams strengthened with CFRP laminates at elevated temperatures. (PhD thesis), Kingston University, .

Philbin, Simon (2010) Developing an integrated approach to system safety engineering. Engineering Management Journal, 22(2), pp. 56-67. ISSN (print) 1042-9247

R

Rahmani, O., Khalili, S.M.R. and Malekzadeh, K. (2010) Free vibration response of composite sandwich cylindrical shell with flexible core. Composite Structures, 92(5), pp. 1269-1281. ISSN (print) 0263-8223

Roether, J.A., Daniel, D.J., Amutha Rani, D., Deegan, D.E., Cheeseman, C.R. and Boccaccini, A.R. (2010) Properties of sintered glass-ceramics prepared from plasma vitrified air pollution control residues. Journal of Hazardous Materials, 173(1-3), pp. 563-569. ISSN (print) 0304-3894

Rumschinski, P, Laila, D. S., Borchers, S. and Findeisen, R. (2010) Influence of discretization errors on set based parameter estimation. In: 49th IEEE Conference on Decision and Control; 15-17 Dec. 2010, Altlanta, Georgia, USA. ISBN 9781424477456

S

Sahinkaya, M. Necip, Abulrub, Abdul-Hadi G., Burrows, Clifford R. and Keogh, Patrick S. (2010) A multiobjective adaptive controller for magnetic bearing systems. Journal Of Engineering For Gas Turbines And Power, 132(12), p. 125503. ISSN (print) 0742-4795

Shakouri, Payman, Ordys, Andrzej, Askari, Mohamad and Laila, Dina (2010) Longitudinal vehicle dynamics using Simulink/Matlab. In: UKACC International Conference on Control; 07 - 11 Sept 2000, Cambridge, U.K..

Shaw, Peter and Lappas, Vaios (2010) Modeling of a pulsed plasma thruster : simple design, complex matter. In: Space Propulsion Conference; 03-06 May 2010, San Sebastian, Spain.

Singh, H, Muetze, A and Eames, PC (2010) Factors influencing the uptake of heat pump technology by the UK domestic sector. Renewable Energy, 35(4), pp. 873-878. ISSN (print) 0960-1481

Singh, H, Redpath, D.A.G., Aboutorabi, A., Kattakayam, T.A. and Griffiths, P.W. (2010) Optimum configuration of compound parabolic concentrator (cpc) solar water heater types for dwellings situated in the northern maritime climate. International Journal of Ambient Energy, 31(1), pp. 47-52. ISSN (print) 0143-0750

Sloan, B, Wang, J, Spence, S, Raghunathan, S and Riordan, D (2010) Aerodynamic performance of bypass engine with nozzle exit area change by warped chevrons. Proceedings of the Institution of Mechanical Engineers, Part G, Journal of Aerospace Engineering, 224(6), pp. 731-743. ISSN (print) 0954-4100

Su, J-L. and Ordys, A.W. (2010) Collision avoidance manoeuvre for a vehicle - a practical approach. Proceedings of the Institution of mechanical Engineers Part D-Journal of Automobile Engineering, 224(3), pp. 299-312. ISSN (print) 0954-4070

T

Tongwei, HAN, Pengfei, HE, Wang, J and Aihui, WU (2010) The effect of vacancy defects on the tensile mechanical properties of single graphene sheets. Journal of Tongji University, 38(8), pp. 1210-1214.

V

Volkov, K.N. (2010) Multigrid techniques as applied to gas dynamic simulation on unstructured meshes. Computational Mathematics and Mathematical Physics, 50(11), pp. 1837-1850. ISSN (print) 0965-5425

Volkov, Konstantin (2010) Aero-optic effects in turbulent wall-bounded and free shear flows. Engineering Letters, 18(3), pp. 285-290. ISSN (print) 1816-093X

Volkov, Konstantin (2010) Internal turbulent two-phase flows formed by wall injection of fluid and particles. In: 5th European Conference on Computational Fluid Dynamics (ECCOMAS CFD 2010); 14-17 June 2010, Lisbon, Portugal.

Volkov, Konstantin (2010) Large-eddy simulation of free shear and wall-bounded turbulent flows. In: Lang, Peter R. and Lombargo, Frank S., (eds.) Atmospheric Turbulence, Meteorological Modelling and Aerodynamics. Hauppauge NY, U.S.A. : Nova Science. pp. 505-574. ISBN 9781607410911

W

Wen, Jennifer (2010) Fire and explosion safety of hydrogen - from fundamental research to prevention, protection and mitigation. In: A Joint Evening Event by the Hazards Forum and The Royal Academy of Engineering: Risks Associated with Alternative Fuels; 22 Sep 2009, London, UK. (Unpublished)

Winward, E., Deng, J. and Stobart, R. (2010) Innovations in experimental techniques for the development of fuel path control in diesel engines. SAE International Journal of Fuels and Lubricants, 3(1), pp. 594-613. ISSN (print) 1946-3952

X

Xia, Changho, Wang, Jian and McMenemy, Karen (2010) Short, medium and long term load forecasting model and virtual load forecaster based on radial basis function neural networks. International Journal of Electrical Power & Energy Systems, 32(7), pp. 743-750. ISSN (print) 0142-0615

Xu, B.P., Chen, Z.B., Wen, J.X., Zhubrin, S., Dembele, S., Wang, Y. and Dorofeev, S. (2010) Large eddy simulation of a one meter diameter methane fire using the extended discrete reaction model. In: Sixth International Seminar on Fire and Explosion Hazards; 11-16 April 2010, Leeds, UK. (Unpublished)

Y

Yao, J., Sian, S., Khan, J. and Yao, Y. (2010) Effect of hole shape on blade cooling effectiveness. In: AIAA 48th Aerospace Sciences Meeting; 04-07 Jan 2010, Orlando, FL, USA.

Yao, Jun (2010) Numerical and experimental studies of gas/liquid two-phase flow in a turbocharger. (PhD thesis), Kingston University, .

Yao, Jun, Sian, Sohan, Yao, Y. and Davis, A.W. (2010) Numerical study of hole shape effect on blade cooling effectiveness. Modern Physics Letters B, 24(13), pp. 1295-1298. ISSN (print) 0217-9849

Yao, Y. and Amos, I.G. (2010) The effect of variable gas property on axial turbine performance. International Journal of Engineering Systems Modelling and Simulations, 2(3), pp. 190-198. ISSN (print) 1755-9758

Z

Zhang, Shaowei, Jayaseelan, D.D., Li, Zushu and Lee, William Edward (2010) Molten salt synthesis of ceramic materials. In: Gaune-Escard, Marcelle and Seddon, Kenneth R., (eds.) Molten salts and ionic liquids: never the twain? Hoboken, U.S. : John Wiley & Sons, Inc. pp. 397-406. ISBN 9780471773924

Zhu, X., Zhang, T., Morris, V. and Marchant, D. (2010) Combustion synthesis of NiAl/Al2O3 composites by induction heating. Intermetallics, 18(6), pp. 1197-1204. ISSN (print) 0966-9795

Zhu, Xiaomeng (2010) Combustion synthesis of Ni, Al and NiAl based composites by induction heating. (PhD thesis), Kingston University, .