Article

Ahmadi, H, Liaghat, GH, Shokrieh, M M, Hadavinia, H, Ordys, A and Aboutorabi, A (2015) Quasi-static and dynamic compressive properties of ceramic microballoon filled syntactic foam. Journal of Composite Materials, 49(10), pp. 1255-1266. ISSN (print) 0021-9983

Al-Khudairi, O., Hadavinia, H., Waggott, A., Lewis, E. and Little, C. (2015) Characterising mode I/mode II fatigue delamination growth in unidirectional fibre reinforced polymer laminates. Materials & Design, 66(A), pp. 93-102. ISSN (print) 0264-1275

Al-Khudairi, O. and Ghasemnejad, H. (2015) To improve failure resistance in joint design of composite wind turbine blade materials. Renewable Energy, 81, pp. 936-951. ISSN (print) 0960-1481

Alvarenga, Jessica, Vitzilaios, Nikolaos I, Rutherford, Matthew J. and Valavanis, Kimon P (2015) Survey of Unmanned Helicopter Model-Based Navigation and Control Techniques. Journal of Intelligent and Robotic Systems, 80(1), pp. 87-138. ISSN (print) 0921-0296

Amiri-Rad, Ahmad, Mashayekhi, Mohammad, van der Meer, Frans P. and Hadavinia, Homa (2015) A two-scale damage model for high cycle fatigue delamination in laminated composites. Composites Science and Technology, 120(4), pp. 32-38. ISSN (print) 0266-3538

Barbosa, Luiz Filipe, Trunins, Jevgenijs, Zweiri, Yahya H., Claus, Malcolm and Kamm, Niklaus (2015) Development and testing of the Mars Rover Mobility Platform for educational and research purposes. IARJSET, 2(10), pp. 99-104. ISSN (print) 2394-1588

Dansoh, Cliff (2015) The viability of renewable energy and energy storage as the power source for municipal- scale reverse osmosis desalination. Desalination and Water Treatment, 55(11), pp. 3064-3090. ISSN (print) 1944-3994

Domun, Nadiim, Hadavinia, H., Zhang, T., Sainsbury, T., Liaghat, G.H. and Vahid, S. (2015) Improving the fracture toughness and the strength of epoxy using nanomaterials : a review of the current status. Nanoscale, 7(23), pp. 10294-10329. ISSN (print) 2040-3364

Duc, Nguyen Dinh, Hadavinia, Homayoun, Thu, Pham Van and Quan, Tran Quoc (2015) Vibration and nonlinear dynamic response of imperfect three-phase polymer nanocomposite panel resting on elastic foundations under hydrodynamic loads. Composite Structures, 131, pp. 229-237. ISSN (print) 0263-8223

Foot, Peter J.S. (2015) Principles and prospects of high-energy magnesium-ion batteries. Science Progress, 98(3), pp. 264-275. ISSN (print) 0036-8504

Ghafari-Namini, N. and Ghasemnejad, H. (2015) Controllable crack propagation in off-axis crushing of stitched composite absorbers. Open Journal of Composite Materials, 5(4), pp. 93-100. ISSN (print) 2164-5612

Hernández, Ó. Soto, Volkov, K., Martín Mederos, A.C., Medina Padrón, J.F. and Feijóo Lorenzo, A.E. (2015) Power output of a wind turbine installed in an already existing viaduct. Renewable and Sustainable Energy Reviews, 48, pp. 287-299. ISSN (print) 1364-0321

Horne, Jim and Rumbold, John (2015) Sleep-related road collisions. Medicine, Science and the Law, 55(3), pp. 183-185. ISSN (print) 0025-8024

Jayaseelan, D.D., Xin, Y., Vandeperre, L., Brown, P. and Lee, W.E. (2015) Development of multi-layered thermal protection system (TPS) for aerospace applications. Composites Part B Engineering, 79, pp. 392-405. ISSN (print) 1359-8368

Jayaseelan, D.D., Zapata-Solvas, E., Carney, C. M., Katz, A., Brown, P. and Lee, W. E. (2015) Microstructural evolution of HfB[sub]2 based ceramics during oxidation at 1600–2000[degrees]C. Advances in Applied Ceramics: Structural, Functional and Bioceramics Journal - Advances in Psychiatric Treatment, 114(5), pp. 277-295. ISSN (print) 1743-6753

Jayaseelan, D.D., Zapata-Solvas, E., Chater, R.J. and Lee, W.E. (2015) Structural and compositional analyses of oxidised layers of ZrB[sub]2- based UHTCs. Journal of the European Ceramic Society, 35(15), pp. 4059-4071. ISSN (print) 0955-2219

Kock, Peter, Weller, Ralf, Ordys, Andrzej W. and Collier, Gordana (2015) Validation Methods for Digital Road Maps in Predictive Control. IEEE Transactions on Intelligent Transportation Systems, 16(1), pp. 339-351. ISSN (print) 1524-9050

Lanzotti, Antonio, Grasso, Marzio, Staiano, Gabriele and Martorelli, Massimo (2015) The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer. Rapid Prototyping Journal, 21(5), pp. 604-617. ISSN (print) 1355-2546

Lukina, Elena, Kollerov, Mikhail, Meswania, Jay, Wertheim, David, Mason, Peter, WAGSTAFF, Paul, Laka, Aleksander, Noordeen, Hilali, Yoon, Wai Weng and Blunn, Gordon (2015) Analysis of retrieved growth guidance sliding LSZ-4D devices for early onset scoliosis and investigation of the use of nitinol rods for this system. Spine, 40(1), pp. 17-24. ISSN (print) 0362-2436

Muppala, S.P.R., Manickam, B. and Dinkelacker, F. (2015) A comparative study of different reaction models for turbulent methane/hydrogen/air combustion. Journal of Thermal Engineering, 1(5), pp. 367-380. ISSN (online) 2148-7847

Ozdemir, Nazli G., Zhang, Tao, Hadavinia, Homayoun, Aspin, Ian and Wang, Jian (2015) Rheological properties, cure characteristics, and morphology of acrylonitrile-based nanorubber modified epoxy. Journal of Applied Polymer Science, 132(18), ISSN (print) 0021-8995

Patra, Niranjan, Jayaseelan, Daniel Doni and Lee, William Edward (2015) Synthesis of biopolymer-derived zirconium carbide powder by facile one-pot reaction. Journal of the American Ceramic Society, 98(1), pp. 71-77. ISSN (print) 0002-7820

Pol, M Hossein, Liaghat, Gholamhossein, Zamani, E and Ordys, A (2015) Investigation of the ballistic impact behavior of 2D woven glass/epoxy/nanoclay nanocomposites. Journal of Composite Materials, 49(12), pp. 1449-1460. ISSN (print) 0021-9983

Sedyono, Joko, Hadavinia, Homayoun, Venetsanos, Demetrios and Marchant, Denis R. (2015) Enumeration search method for optimisation of stacking sequence of laminated composite plates subjected to buckling. Open Engineering, 5(1), ISSN (online) 2391-5439

Venugopal, Saranya, Jayaseelan, Daniel Doni, Paul, Anish, Vaidhyanathan, Bala, Binner, Jon G. P., Brown, Peter M. and Fahrenholtz, W. (2015) Screw dislocation assisted spontaneous growth of HfB2 tubes and rods. Journal of the American Ceramic Society, 98(7), pp. 2060-2064. ISSN (print) 0002-7820

Wanninayake, I. B., Dasgupta, P., Seneviratne, L. D. and Althoefer, K. (2015) Modeling and optimizing output characteristics of intensity modulated optical fiber-based displacement sensors. IEEE Transactions on Instrumentation and Measurement, 64(3), pp. 758-767. ISSN (print) 0018-9456

Book Section

Dansoh, Clifford (2015) The viability of renewable energy and energy storage as the power source for municipal scale reverse osmosis desalination. In: Baawain, Mahad , Choudri, B.S. , Ahmed, Mushtaque and Purnama, Anton, (eds.) Recent progress in desalination, environmental and marine outfall systems. Cham, Switzerland : Springer. pp. 139-155. ISBN 9783319191225

Fountas, Nikolaos A., Vaxevanidis, Nikolaos M., Stergiou, Constantinos I. and Benhadj-Djilali, Redha (2015) Intelligent CNC tool path optimization for sculptured surface machining through a virus-evolutionary genetic algorithm. In: Davim, J. Paulo, (ed.) Modern manufacturing engineering. Cham, Switzerland : Springer International Publishing. pp. 143-177. (Materials forming, machining and tribology) ISSN (print) 2195-0911 ISBN 9783319201511

Conference or Workshop Item

Alvarenga, Jessica, Vitzilaios, Nikolaos I., Rutherford, Matthew J. and Valavanis, Kimon P. (2015) Scaled control performance benchmarks and maneuvers for Small-Scale Unmanned Helicopters. In: 54th IEEE Conference on Decision and Control; 15–18 Dec, 2015, Osaka, Japan. ISBN 9781479978847

Bittar, Adriano, Vitzilaios, Nikolaos I., Rutherford, Matthew J. and Valavanis, Kimon P. (2015) An integrated framework for Cooperative Ground and Aerial Vehicles Missions utilizing Matlab and X-Plane. In: 9th Annual IEEE International Systems Conference (SysCon); 13-16 April 2015, Vancouver, BC, Canada.

Calautit, J. K., O'Connor, D., Nasir, SNM., Sofotasiou, P., Hughes, B. and Shahzad, S. (2015) Numerical analysis of a wind catcher assisted passive cooling technology. In: USES 2015 : The University of Sheffield Engineering Symposium; 24 Jun 2015, Sheffield, U.K..

Cedillos, O., Grasso, S., Manara, D., Jayaseelan, D.D., Konings, R. and Lee, W.E. (2015) Processing and characterisation of (Ta,Hf)C ultra-high temperature ceramics. In: Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications III; 12-16 Apr 2015, Gold Coast, Australia.

Chakraborty, Moupali and Ghorai, Prasenjit (2015) Performance evaluation of time delay processes based on FL, FNN & fractional order controllers. In: Michael Faraday IET International Summit 2015; 12-13 Sep 2015, Kolkata, India.

Conyers, Stephen A., Vitzilaios, Nikolaos I., Rutherford, Matthew J. and Valavanis, Kimon P. (2015) A mobile self-leveling landing platform for VTOL UAVs. In: 2015 IEEE International Conference on Robotics and Automation (ICRA); 26-30 May 2015, Seattle, WA, U.S.A.. ISSN (print) 1050-4729

Fountas, Nikolaos A., Vaxevanidis, Nikolaos M., Stergiou, Constantinos I. and Benhadj-Djilali, Redha (2015) Quality research on the performance of a virus-evolutionary genetic algorithm for optimized sculptured surface CNC machining, through standard benchmarks. In: 9th International Quality Conference May 2015 Center for Quality, Faculty of Engineering, University of Kragujevac; 04 - 05 Jun 2015, Kragujevac, Serbia. ISBN 9788663350151

Hadavinia, Homayoun and Marchant, Denis (2015) Fatigue performance of fibre reinforced plastic (FRP) and the "lesson" learnt for automotive chassis design. In: Lightweight Chassis & Frame Design; 18-20 May 2015, Wiesbaden,Germany. (Unpublished)

Heidari, Ali and Wen, Jennifer (2015) Numerical simulation of detonation failure and re-initiation in bifurcated tubes. In: The 6th International Conference on Hydrogen Safety (ICHS 2015); 19-21 Oct, 2015, Yokohama, Japan.

Heidari, Ali and Wen, Jennifer (2015) Numerical simulation of diverging detonation in hydrogen air mixtures. In: The 6th International Conference on Hydrogen Safety (ICHS 2015); 19-21 Oct 2015, Yokohama, Japan.

Kanistras, Konstantinos, Chander Saka, Pranith, Valavanis, Kimon P., Vitzilaios, Nikolaos and Rutherford, Matthew J. (2015) Design and Development of an Air Supply Unit for Circulation Control Wing-Based UAVs. In: 2015 IEEE Aerospace Conference; 7-14 March 2015, Big Sky, MT, U.S.A.. ISSN (print) 1095-323X ISBN 9781479953790

Kanistras, Konstantinos, Chander Saka, Pranith, Valavanis, Kimon P., Vitzilaios, Nikolaos I. and Rutherford, Matthew J. (2015) Low Speed Wind Tunnel Investigation of a Circulation Control Wing for Enhanced Lift. In: 33rd AIAA Applied Aerodynamics Conference; 22–26 June, 2015, Dallas, TX, U.S.A..

Khazaeinejad, P., Dai, X. and Usmani, A. (2015) Analysis of heated beams : modelling benchmarks. In: The First International Conference on Structural Safety under Fire and Blast (CONFAB) 2015; 02-04 Sep 2015, Glasgow, U.K.. (Unpublished)

Khazaeinejad, Payam and Usmani, Asif (2015) Anatomy of the "compressive ring" in plates under fire. In: ASCE Engineering Mechanics Institute Conference; 16 - 19 Jun 2015, Stanford, U.S.. (Unpublished)

Lee, W.E. and Jayaseelan, Doni D. (2015) Development of UHTC composites for aerospace applications. In: Serbian Ceramic Society Conference - ADVANCED CERAMICS AND APPLICATION IV; 21-23 Sept 2015, Belgrade, Serbia. (Unpublished)

Lerdprom, Wirat, Chinnam, Rama K., Jayaseelan, Doni D. and Lee, William E. (2015) Feasibility study of porcelain production by a direct sintering technique. In: International Conference on Traditional and Advanced Ceramics 2015; 9-11 Sep 2015, Bangkok, Thailand. (Unpublished)

Macchi, M., Wen, J., Volkov, K., Heidari, A. and Chung, Y. (2015) Modelling liquid fuel cascades with OpenFOAM. In: 11th Global Congress on Process Safety; 27-29 Apr 2015, Texas, USA.

Nasir, Diana S. N. M., Hughes, Ben R. and Calautit, John K. (2015) CFD simulation of integrating solar roads in urban canyon. In: USES 2015 : The University of Sheffield Engineering Symposium; 24 Jun 2015, Sheffield, U.K..

Patra, N., Jayaseelan, D. and Lee, W. (2015) In situ synthesis of ZrB2/SiC hybrid composite for leading edges of hypersonic vehicles. In: 39th International Conference and Exposition on Advanced Ceramics and Composites; 25-30 Jan 2015, Daytona Beach, Florida, U.S.. (Unpublished)

Patra, N., Jayaseelan, D.D. and Lee, W.E. (2015) Solution-based synthesis of HfB2/SiC composite powder from an organic-inorganic hybrid precursor. In: European Congress and Exhibition on Advanced Materials and Processes 2015; 20-24 Sep 2015, Warsaw, Poland. (Unpublished)

Patra, Niranjan, Jayaseelan, Daniel Doni and Lee, William Edward (2015) Preparation and characterization of carbon fiber reinforced ZrB2/SiC composite by precursor infiltration and pyrolysis process. In: European Congress and Exhibition on Advanced Materials and Processes 2015; 20-24 Sep 2015, Warsaw, Poland. (Unpublished)

Rabiee, A. and Ghasemnejad, H. (2015) High Speed Crushing Behaviour of GFRP Composite Tubes. In: 2nd International Conference on Aeronautical and Mechanical Engineering; 12 - 14 Dec 2015, Budapest, Hungary.

Umeokafor, Nnedinma and Isaac, David (2015) Understanding the regulatory activities of the health and safety regulator in Nigeria. In: CIB W099 Benefitting Workers and Society through Inherently Safe(r) Construction; 10 - 11 Sept 2015, Belfast, U.K.. ISBN 9781909854017

Umeokafor, Nnedinma (2015) An assessment of the influence of contextual environment on health and safety practices in the Nigerian construction industry. In: CIB WO99 International Health and Safety Conference; 09 - 11 Sept 2015, Londonderry, NI.

Umeokafor, Nnedinma and Isaac, David (2015) A framework for analysing the determinants of health and safety self-regulation in the construction industry. In: CIB W099 Benefitting Workers and Society through Inherently Safe(r) Construction; 10 - 11 Sept 2015, Belfast, U.K.. ISBN 9781909854017

Patent

Abde Qader Alzu'bi, Hamzeh Mahmoud, Abd Allateef, Imad Abd, Zweiri, Yahya, Alkhateeb, Basim and Al-Majali, Yahya Taha Ayed (2015) Abde Qader Alzu'bi; Hamzeh Mahmoud, Allateef; Imad Abd, Zweiri; Yahya, Alkhateeb; Basim, Ayed Al-Majali; Yahya Taha Sided performance coaxial vertical take-off and landing UAV and pitch stability technique using oblique active tilting. US 8,931,729 B2.

Thesis

Babahaji Meibodi, Amir Reza (2015) On-site concrete waste minimisation in Iran. (PhD thesis), Kingston University, .

Bostanci, Sevket Can (2015) Low carbon sustainable concrete design and construction. (PhD thesis), Kingston University, .

Horikiri, Kana (2015) Numerical simulation and indoor airflow and heat transfer study for thermal comfort. (PhD thesis), Kingston University, .

Kusztelan, Alexander (2015) An experimental and computational study of a twin-entry turbo charger for downsized internal combustion engines. (PhD thesis), Kingston University, .

Munoz Moya, Carlos (2015) Development of a monopropellant thruster design process. (PhD thesis), Kingston University, .

Ozdemir, Nazli Gulsine (2015) Toughening of epoxy matrix composites with nanorubber for advanced industrial applications. (PhD thesis), Kingston University, .

Udechukwu, Izunna David (2015) Development of a model for computational fluid dynamics simulation of liquefied natural gas vapour dispersion. (PhD thesis), Kingston University, .