A

Abde Qader Alzu'bi, Hamzeh Mahmoud, Abd Allateef, Imad Abd, Zweiri, Yahya, Alkhateeb, Basim and Al-Majali, Yahya Taha Ayed (2015) Abde Qader Alzu'bi; Hamzeh Mahmoud, Allateef; Imad Abd, Zweiri; Yahya, Alkhateeb; Basim, Ayed Al-Majali; Yahya Taha Sided performance coaxial vertical take-off and landing UAV and pitch stability technique using oblique active tilting. US 8,931,729 B2.

Ahmadi, H, Liaghat, GH, Shokrieh, M M, Hadavinia, H, Ordys, A and Aboutorabi, A (2015) Quasi-static and dynamic compressive properties of ceramic microballoon filled syntactic foam. Journal of Composite Materials, 49(10), pp. 1255-1266. ISSN (print) 0021-9983

Al-Khudairi, O., Hadavinia, H., Waggott, A., Lewis, E. and Little, C. (2015) Characterising mode I/mode II fatigue delamination growth in unidirectional fibre reinforced polymer laminates. Materials & Design, 66(A), pp. 93-102. ISSN (print) 0264-1275

Alvarenga, Jessica, Vitzilaios, Nikolaos I., Rutherford, Matthew J. and Valavanis, Kimon P. (2015) Scaled control performance benchmarks and maneuvers for Small-Scale Unmanned Helicopters. In: 54th IEEE Conference on Decision and Control; 15–18 Dec, 2015, Osaka, Japan. ISBN 9781479978847

Alvarenga, Jessica, Vitzilaios, Nikolaos I, Rutherford, Matthew J. and Valavanis, Kimon P (2015) Survey of Unmanned Helicopter Model-Based Navigation and Control Techniques. Journal of Intelligent and Robotic Systems, 80(1), pp. 87-138. ISSN (print) 0921-0296

B

Barbosa, Luiz Filipe, Trunins, Jevgenijs, Zweiri, Yahya H., Claus, Malcolm and Kamm, Niklaus (2015) Development and testing of the Mars Rover Mobility Platform for educational and research purposes. IARJSET, 2(10), pp. 99-104. ISSN (print) 2394-1588

Bittar, Adriano, Vitzilaios, Nikolaos I., Rutherford, Matthew J. and Valavanis, Kimon P. (2015) An integrated framework for Cooperative Ground and Aerial Vehicles Missions utilizing Matlab and X-Plane. In: 9th Annual IEEE International Systems Conference (SysCon); 13-16 April 2015, Vancouver, BC, Canada.

C

Cedillos, O., Grasso, S., Manara, D., Jayaseelan, D.D., Konings, R. and Lee, W.E. (2015) Processing and characterisation of (Ta,Hf)C ultra-high temperature ceramics. In: Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications III; 12-16 Apr 2015, Gold Coast, Australia.

Conyers, Stephen A., Vitzilaios, Nikolaos I., Rutherford, Matthew J. and Valavanis, Kimon P. (2015) A mobile self-leveling landing platform for VTOL UAVs. In: 2015 IEEE International Conference on Robotics and Automation (ICRA); 26-30 May 2015, Seattle, WA, U.S.A.. ISSN (print) 1050-4729

D

Domun, Nadiim, Hadavinia, H., Zhang, T., Sainsbury, T., Liaghat, G.H. and Vahid, S. (2015) Improving the fracture toughness and the strength of epoxy using nanomaterials : a review of the current status. Nanoscale, 7(23), pp. 10294-10329. ISSN (print) 2040-3364

Duc, Nguyen Dinh, Hadavinia, Homayoun, Thu, Pham Van and Quan, Tran Quoc (2015) Vibration and nonlinear dynamic response of imperfect three-phase polymer nanocomposite panel resting on elastic foundations under hydrodynamic loads. Composite Structures, 131, pp. 229-237. ISSN (print) 0263-8223

E

Esconjauregui, Santiago, D’Arsié, Lorenzo, Guo, Yuzheng, Yang, Junwei, Sugime, Hisashi, Caneva, Sabina, Cepek, Cinzia and Robertson, John (2015) Efficient transfer doping of carbon nanotube forests by MoO[sub]3. ACS Nano, 9(10), pp. 10422-10430. ISSN (print) 1936-0851

F

Fountas, N., Vaxevanidisa, N., Stergiou, C. and Benhadj-Djilali, R. (2015) Evaluation of 3- and 5-axis sculptured surface machining in CAM environment through design of experiments. International Journal of Computer Integrated Manufacturing, 28(3), pp. 278-296. ISSN (print) 0951-192X

Fountas, Nikolaos A., Vaxevanidis, Nikolaos M., Stergiou, Constantinos I. and Benhadj-Djilali, Redha (2015) Intelligent CNC tool path optimization for sculptured surface machining through a virus-evolutionary genetic algorithm. In: Davim, J. Paulo, (ed.) Modern manufacturing engineering. Cham, Switzerland : Springer International Publishing. pp. 143-177. (Materials forming, machining and tribology) ISSN (print) 2195-0911 ISBN 9783319201511

Fountas, Nikolaos A., Vaxevanidis, Nikolaos M., Stergiou, Constantinos I. and Benhadj-Djilali, Redha (2015) Quality research on the performance of a virus-evolutionary genetic algorithm for optimized sculptured surface CNC machining, through standard benchmarks. In: 9th International Quality Conference May 2015 Center for Quality, Faculty of Engineering, University of Kragujevac; 04 - 05 Jun 2015, Kragujevac, Serbia. ISBN 9788663350151

H

Hadavinia, Homayoun and Marchant, Denis (2015) Fatigue performance of fibre reinforced plastic (FRP) and the "lesson" learnt for automotive chassis design. In: Lightweight Chassis & Frame Design; 18-20 May 2015, Wiesbaden,Germany. (Unpublished)

Heidari, Ali and Wen, Jennifer (2015) Numerical simulation of detonation failure and re-initiation in bifurcated tubes. In: The 6th International Conference on Hydrogen Safety (ICHS 2015); 19-21 Oct, 2015, Yokohama, Japan.

Heidari, Ali and Wen, Jennifer (2015) Numerical simulation of diverging detonation in hydrogen air mixtures. In: The 6th International Conference on Hydrogen Safety (ICHS 2015); 19-21 Oct 2015, Yokohama, Japan.

Hernández, Ó. Soto, Volkov, K., Martín Mederos, A.C., Medina Padrón, J.F. and Feijóo Lorenzo, A.E. (2015) Power output of a wind turbine installed in an already existing viaduct. Renewable and Sustainable Energy Reviews, 48, pp. 287-299. ISSN (print) 1364-0321

Horikiri, Kana (2015) Numerical simulation and indoor airflow and heat transfer study for thermal comfort. (PhD thesis), Kingston University, .

Horne, Jim and Rumbold, John (2015) Sleep-related road collisions. Medicine, Science and the Law, 55(3), pp. 183-185. ISSN (print) 0025-8024

K

Kanistras, Konstantinos, Chander Saka, Pranith, Valavanis, Kimon P., Vitzilaios, Nikolaos and Rutherford, Matthew J. (2015) Design and Development of an Air Supply Unit for Circulation Control Wing-Based UAVs. In: 2015 IEEE Aerospace Conference; 7-14 March 2015, Big Sky, MT, U.S.A.. ISSN (print) 1095-323X ISBN 9781479953790

Kanistras, Konstantinos, Chander Saka, Pranith, Valavanis, Kimon P., Vitzilaios, Nikolaos I. and Rutherford, Matthew J. (2015) Low Speed Wind Tunnel Investigation of a Circulation Control Wing for Enhanced Lift. In: 33rd AIAA Applied Aerodynamics Conference; 22–26 June, 2015, Dallas, TX, U.S.A..

Khazaeinejad, P., Dai, X. and Usmani, A. (2015) Analysis of heated beams : modelling benchmarks. In: The First International Conference on Structural Safety under Fire and Blast (CONFAB) 2015; 02-04 Sep 2015, Glasgow, U.K.. (Unpublished)

Khazaeinejad, P., Usmani, A. S. and Laghrouche, O. (2015) Temperature-dependent nonlinear behaviour of thin rectangular plates exposed to through-depth thermal gradients. Composite Structures, 132, pp. 652-664. ISSN (print) 0263-8223

Khazaeinejad, Payam and Usmani, Asif (2015) Anatomy of the "compressive ring" in plates under fire. In: ASCE Engineering Mechanics Institute Conference; 16 - 19 Jun 2015, Stanford, U.S.. (Unpublished)

Khazaeinejad, Payam (2015) Fundamental solutions for beams, plates, and shells under thermomechanical actions. (PhD thesis), The University of Edinburgh, .

Kock, Peter, Weller, Ralf, Ordys, Andrzej W. and Collier, Gordana (2015) Validation Methods for Digital Road Maps in Predictive Control. IEEE Transactions on Intelligent Transportation Systems, 16(1), pp. 339-351. ISSN (print) 1524-9050

L

Lanzotti, Antonio, Grasso, Marzio, Staiano, Gabriele and Martorelli, Massimo (2015) The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer. Rapid Prototyping Journal, 21(5), pp. 604-617. ISSN (print) 1355-2546

Lerdprom, Wirat, Chinnam, Rama K., Jayaseelan, Doni D. and Lee, William E. (2015) Feasibility study of porcelain production by a direct sintering technique. In: International Conference on Traditional and Advanced Ceramics 2015; 9-11 Sep 2015, Bangkok, Thailand. (Unpublished)

M

Macchi, M., Wen, J., Volkov, K., Heidari, A. and Chung, Y. (2015) Modelling liquid fuel cascades with OpenFOAM. In: 11th Global Congress on Process Safety; 27-29 Apr 2015, Texas, USA.

O

Ozdemir, Nazli G., Zhang, Tao, Hadavinia, Homayoun, Aspin, Ian and Wang, Jian (2015) Rheological properties, cure characteristics, and morphology of acrylonitrile-based nanorubber modified epoxy. Journal of Applied Polymer Science, 132(18), ISSN (print) 0021-8995

Ozdemir, Nazli Gulsine (2015) Toughening of epoxy matrix composites with nanorubber for advanced industrial applications. (PhD thesis), Kingston University, .

P

Patra, N., Jayaseelan, D. and Lee, W. (2015) In situ synthesis of ZrB2/SiC hybrid composite for leading edges of hypersonic vehicles. In: 39th International Conference and Exposition on Advanced Ceramics and Composites; 25-30 Jan 2015, Daytona Beach, Florida, U.S.. (Unpublished)

Patra, N., Jayaseelan, D.D. and Lee, W.E. (2015) Solution-based synthesis of HfB2/SiC composite powder from an organic-inorganic hybrid precursor. In: European Congress and Exhibition on Advanced Materials and Processes 2015; 20-24 Sep 2015, Warsaw, Poland. (Unpublished)

Patra, Niranjan, Jayaseelan, Daniel Doni and Lee, William Edward (2015) Preparation and characterization of carbon fiber reinforced ZrB2/SiC composite by precursor infiltration and pyrolysis process. In: European Congress and Exhibition on Advanced Materials and Processes 2015; 20-24 Sep 2015, Warsaw, Poland. (Unpublished)

Pol, M Hossein, Liaghat, Gholamhossein, Zamani, E and Ordys, A (2015) Investigation of the ballistic impact behavior of 2D woven glass/epoxy/nanoclay nanocomposites. Journal of Composite Materials, 49(12), pp. 1449-1460. ISSN (print) 0021-9983

S

Sedyono, Joko, Hadavinia, Homayoun, Venetsanos, Demetrios and Marchant, Denis R. (2015) Enumeration search method for optimisation of stacking sequence of laminated composite plates subjected to buckling. Open Engineering, 5(1), ISSN (online) 2391-5439

U

Udechukwu, Izunna David (2015) Development of a model for computational fluid dynamics simulation of liquefied natural gas vapour dispersion. (PhD thesis), Kingston University, .