Article

Aboutorabi, A., Ghasemnejad, H. and Hadavinia, H. (2010) Analytical approach for progressive failure crushing modes of woven FRP composite box structures. World Journal of Engineering, 7(3), pp. 154-162. ISSN (print) 1708-5284

Alcantara-Ayala, I. and Dykes, A. P. (2010) Introduction: Land use change in the tropics: causes, consequences and monitoring in Mexico. Singapore Journal Of Tropical Geography, 31(2), pp. 143-151. ISSN (print) 0129-7619

Bengherbia, T., Bauer, P., Yao, Y. and Knowlen, C. (2010) One-dimensional performance modelling of the ram accelerator in subdetonative regime. Journal of Aerospace Science, Technologies and Systems, 88(1), pp. 3-13.

Bengherbia, Tarek, Yao, Yufeng, Bauer, Pascal and Knowlen, Carl (2010) Equations of state for 1-D modelling of ram accelerator thrust in thermally choked propulsion mode. International Journal of Engineering Systems Modelling and Simulations, 2(3), pp. 154-161. ISSN (print) 1755-9758

Calabria A., Juliana, Vasconcelos, Wander L., Daniel, Doni J., Chater, Richard, McPhail, David and Boccaccini, Aldo R. (2010) Synthesis of sol–gel titania bactericide coatings on adobe brick. Construction and Building Materials, 24(3), pp. 384-389. ISSN (print) 0950-0618

Castagna, Jony and Yao, Yufeng (2010) Development of a multi-block high-order DNS code for turbulent flow simulations. IOP Conference Series: Materials Science and Engineering, 10(012027), ISSN (print) 1757-8981

Chang, N., Wang, W., Yang, W. and Wang, J. (2010) Ply stacking sequence optimization of composite laminate by permutation discrete particle swarm optimization. Structural and Multidisciplinary Optimization, 41(2), pp. 179-187. ISSN (print) 1615-147X

Chau, M., Hoffmann, Joerg, Blundell, M.V., Ordys, A. and Hadavinia, H. (2010) Effect of side-wall reinforcement on energy absorption of thin-wall cylindrical damper. Key Engineering Materials, 417-18, pp. 785-788. ISSN (print) 1013-9826

David-West, O. S., Wang, J. and Cooper, R. (2010) Finite element model updating of a thin wall enclosure under impact excitation. Applied Mechanics and Materials, 24-25, pp. 337-342. ISSN (print) 1660-9336

Dembele, S., Rosario, R.A.F., Wang, Q.S., Warren, P.D. and Wen, J.X. (2010) Thermal and stress analysis of glazing in fires and glass fracture modeling with a probabilistic approach. Numerical Heat Transfer Part B, 58(6), pp. 419-439. ISSN (print) 1040-7790

Dogan, Faith, Hadavinia, Homayoun, Barton, Stephen J and Mason, Peter J. (2010) Applications of intrinsically conducting polymers. Recent Patents on Mechanical Engineering, 3(3), pp. 174-182. ISSN (print) 2212-7976

Dykes, Alan P. and Selkirk-Bell, Jennifer M. (2010) Landslides in blanket peat on subantarctic islands: causes, characteristics and global significance. Geomorphology, 124(3-4), pp. 215-228. ISSN (print) 0169-555X

England, J., Hadavinia, H., Marchant, D.R. and Aboutorabi, A. (2010) Design of Automotive Metal and Composite Chassis Structures. Recent Patents on Mechanical Engineering, 3(3), pp. 211-225. ISSN (print) 2212-7976

Esfahani, M.M. Nasr, Ghasemnejad, H. and Barrington, P.E. (2010) Experimental and numerical buckling analysis of delaminated hybrid composite beam structures. Applied Mechanics and Materials, 24-25, pp. 393-400. ISSN (print) 1662-7482

Gao, J., Zhang, T., Bao, Y. and Gawne, D.T. (2010) Plasma-scan sintering of aluminosilicate sol-gel films. Journal of the European Ceramic Society, 30(4), pp. 847-855. ISSN (print) 0955-2219

Ghasemnejad, H, Furquan, A.S.M. and Mason, P. J. (2010) Charpy impact damage behaviour of single and multi-delaminated hybrid composite beam structures. Materials & Design, 31(8), pp. 3653-3660. ISSN (print) 0264-1275

Ghasemnejad, H., Hadavinia, H. and Aboutorabi, A. (2010) Effect of delamination failure in crashworthiness analysis of hybrid composite box structures. Materials & Design, 31(3), pp. 1105-1116. ISSN (print) 0264-1275

Ghasemnejad, H. and Hadavinia, H. (2010) Off-axis crashworthiness characteristic of woven glass/epoxy composite box structures. Journal of Reinforced Plastics and Composites, 29(15), pp. 2306-2330. ISSN (print) 0731-6844

HAN, Tong-wei, He, Peng-fei, Wang, Jian and Wu, Ai-hui (2010) Molecular dynamics simulation of single graphene sheet under tension. New Carbon Materials, 25(4), pp. 261-266. ISSN (print) 1872-5805

Inam, Fawad, Yan, Haixue, Jayaseelan, Daniel D., Peijs, Ton and Reece, Michael J. (2010) Electrically conductive alumina–carbon nanocomposites prepared by Spark Plasma Sintering. Journal of the European Ceramic Society, 30(2), pp. 153-157. ISSN (print) 0955-2219

Izzard, Vanessa, Bradsell, Colin, Hadavinia, H., Morris, Valerie, Foot, P.J.S. and Witten, N. (2010) Investigation of the compression recovery properties of Polyamide-6 cellular solid over the temperature range of -5[degrees]C to 90[degrees]C. Key Engineering Materials, 417-18, pp. 933-936. ISSN (print) 1013-9826

Jackson, Heather F., Jayaseelan, Daniel D., Lee, William E., Reece, Michael J., Inam, Fawad, Manara, Dario, Casoni, Carlo Perinetti, De Bruycker, Franck and Boboridis, Konstantinos (2010) Laser melting of spark plasma-sintered zirconium carbide : thermophysical properties of a generation IV very high-temperature reactor material. International Journal of Applied Ceramic Technology, 7(3), pp. 316-326. ISSN (print) 1546-542X

Jayaseelan, D.D., Jackson, H., Eakins, E., Brown, P. and Lee, W.E. (2010) Laser modified microstructures in ZrB[sub]2, ZrB[sub]2/SiC and ZrC. Journal of the European Ceramic Society, 30(11), pp. 2279-2288. ISSN (print) 0955-2219

Khalili, S.M.R., Ghaja, R., Sadeghinia, M, Mittalc, R. K. and Mason, P. (2010) Effect of patching on charpy impact response of repaired notched plate - Experimental study. Journal of Adhesion, 86(5 & 6), pp. 561-585. ISSN (print) 0021-8464

Khazaeinejad, P., Najafizadeh, M. M., Jenabi, J. and Isvandzibaei, M. R. (2010) On the buckling of functionally graded cylindrical shells under combined external pressure and axial compression. Journal of Pressure Vessel Technology, 132(6), 064501. ISSN (print) 0094-9930

Li, Wenqiang, Li, Yan, Wang, Jian and Liu, Xiaoying (2010) The process model to aid innovation of products conceptual design. Expert Systems with Applications, 37(5), pp. 3574-3587. ISSN (print) 0957-4174

Limbachiya, M.C. (2010) Recycled aggregates: production, properties and value-added sustainable applications. Journal of Wuhan University of Technology Materials Science, 25(6), pp. 1011-1016. ISSN (print) 1000-2413

Liu, J., Zhang, T., Bao, Y. and Gawne, D.T. (2010) Processing and properties of plasma sprayed silicon nitride-glass composite coatings. Advance in Applied Ceramics, 109(6), pp. 355-361. ISSN (print) 1743-6753

Liu, J., Zhang, T., Bao, Y. and Gawne, D.T. (2010) Sintering behaviour of glass-silicon nitride composites for thermal spray precursor powders. Advances in Applied Ceramics: Structural, Functional and Bioceramics Journal - Advances in Psychiatric Treatment, 109(2), pp. 71-78. ISSN (print) 1743-6753

Majrouhi Sardroud, J and Limbachiya, M.C. (2010) Effective information delivery at construction phase with integrated application of RFID, GPS and GSM technology. Lecture Notes in Engineering and Computer Science, 2183(1), pp. 425-431. ISSN (print) 2078-0958

Majrouhi Sardroud, J and Limbachiya, M.C. (2010) Utilization of Advanced Data Storage Technology to Conduct Construction Industry on Clear Environment. Journal of World Academy of Science, Engineering and Technology, 66, pp. 808-813. ISSN (online) 1307-6884

Meddah, Mohammed Seddik and Sato, Ryoichi (2010) Effect of curing methods on autogenous shrinkage and self-induced stress of high-performance concrete. ACI Materials Journal, 107(1), pp. 65-74. ISSN (print) 0889-325X

Meddah, Mohammed Seddik, Zitouni, Salim and Belaâbes, Saïd (2010) Effect of size and content of coarse aggregate on the compressive strength of concrete. Construction and Building Materials, 24(4), pp. 505-512. ISSN (print) 0950-0618

Najafizadeh, M M, Mahdavian, M and Khazaeinejad, P (2010) Superposition buckling analysis of rectangular plates composed of functionally graded materials subjected to non-uniform distributed in-plane loading. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224(11), pp. 2299-2307. ISSN (print) 0954-4062

Omer, J. R., Delpak, R and Robinson, R. B. (2010) An empirical method of analysis of load transfer and settlement behaviour of single piles. Journal of Geotechnical and Geological Engineering, 28(4), pp. 483-501. ISSN (print) 0960-3182

Pang, Bo, McPhail, David S., Jayaseelan, Daniel Doni and Boccaccini, Aldo Roberto (2010) Development and characterization of transparent glass matrix composites. Advances in Science and Technology, 71, pp. 102-107. ISSN (print) 1662-8969

Rahmani, O., Khalili, S.M.R. and Malekzadeh, K. (2010) Free vibration response of composite sandwich cylindrical shell with flexible core. Composite Structures, 92(5), pp. 1269-1281. ISSN (print) 0263-8223

Roether, J.A., Daniel, D.J., Amutha Rani, D., Deegan, D.E., Cheeseman, C.R. and Boccaccini, A.R. (2010) Properties of sintered glass-ceramics prepared from plasma vitrified air pollution control residues. Journal of Hazardous Materials, 173(1-3), pp. 563-569. ISSN (print) 0304-3894

Shang, Zhi and Lo, Simon (2010) Numerical investigation of supercritical water-cooled nuclear reactor in horizontal rod bundles. Nuclear Engineering and Design, 240(4), pp. 776-782. ISSN (print) 0029-5493

Singh, H, Redpath, D.A.G., Aboutorabi, A., Kattakayam, T.A. and Griffiths, P.W. (2010) Optimum configuration of compound parabolic concentrator (cpc) solar water heater types for dwellings situated in the northern maritime climate. International Journal of Ambient Energy, 31(1), pp. 47-52. ISSN (print) 0143-0750

Sloan, B, Wang, J, Spence, S, Raghunathan, S and Riordan, D (2010) Aerodynamic performance of bypass engine with nozzle exit area change by warped chevrons. Proceedings of the Institution of Mechanical Engineers, Part G, Journal of Aerospace Engineering, 224(6), pp. 731-743. ISSN (print) 0954-4100

Su, J-L. and Ordys, A.W. (2010) Collision avoidance manoeuvre for a vehicle - a practical approach. Proceedings of the Institution of mechanical Engineers Part D-Journal of Automobile Engineering, 224(3), pp. 299-312. ISSN (print) 0954-4070

Sun, Z., Chew, J.W., Hills, N.J., Volkov, K.N. and Barnes, C.J. (2010) Efficient finite element analysis/computational fluid dynamics thermal coupling for engineering applications. Journal Of Turbomachinery, 132(3), 031016. ISSN (print) 0889-504X

Tongwei, HAN, Pengfei, HE, Wang, J and Aihui, WU (2010) The effect of vacancy defects on the tensile mechanical properties of single graphene sheets. Journal of Tongji University, 38(8), pp. 1210-1214.

Volkov, K. (2010) Conjugate heat transfer in a rotating disc with holes. Journal of Engineering Physics and Thermophysics, 83(2), pp. 291-302. ISSN (print) 1062-0125

Volkov, K.N. (2010) Multigrid techniques as applied to gas dynamic simulation on unstructured meshes. Computational Mathematics and Mathematical Physics, 50(11), pp. 1837-1850. ISSN (print) 0965-5425

Volkov, Konstantin (2010) Aero-optic effects in turbulent wall-bounded and free shear flows. Engineering Letters, 18(3), pp. 285-290. ISSN (print) 1816-093X

Xia, Changho, Wang, Jian and McMenemy, Karen (2010) Short, medium and long term load forecasting model and virtual load forecaster based on radial basis function neural networks. International Journal of Electrical Power & Energy Systems, 32(7), pp. 743-750. ISSN (print) 0142-0615

Yao, Jun, Sian, Sohan, Yao, Y. and Davis, A.W. (2010) Numerical study of hole shape effect on blade cooling effectiveness. Modern Physics Letters B, 24(13), pp. 1295-1298. ISSN (print) 0217-9849

Yao, Y. and Amos, I.G. (2010) The effect of variable gas property on axial turbine performance. International Journal of Engineering Systems Modelling and Simulations, 2(3), pp. 190-198. ISSN (print) 1755-9758

Yin, Shuo, Wang, Xaio-fang, Xu, Bao-peng and Li, Wen-ya (2010) Examination on the calculation method for modeling the multi-particle impact process in cold spraying. Journal Of Thermal Spray Technology, 19(5), pp. 1032-1041. ISSN (print) 1059-9630

Yin, Shuo, Wang, Xiao-fang, Li, Wen-ya and Xu, Baopeng (2010) Numerical Study on the Effect of Substrate Angle on Particle Impact Velocity and Normal Velocity Component in Cold Gas Dynamic Spraying Based on CFD. Journal Of Thermal Spray Technology, 19(6), pp. 1155-1162. ISSN (print) 1059-9630

Zhu, X., Zhang, T., Morris, V. and Marchant, D. (2010) Combustion synthesis of NiAl/Al2O3 composites by induction heating. Intermetallics, 18(6), pp. 1197-1204. ISSN (print) 0966-9795

Zhu, X., Zhang, T., Marchant, D. and Morris, V. (2010) Combustion synthesis of TiC-NiAl composite by induction heating. Journal of the European Ceramic Society, 30(13), pp. 2781-2790. ISSN (print) 0955-2219

Book

Volkov, K. and Emelyanov, V. (2010) Flows and heat transfer in channels and rotating cavities. Moscow, Publishing House of Physical and Mathematical Literature. 488p. ISBN 5922111829

Book Section

Cade, Lain S., Sahinkaya, M. Necip, Burrows, Clifford R. and Keogh, Patrick S. (2010) Destabilization of forward rub in rotor magnetic bearing systems using actively controlled auxiliary bearings. In: UNSPECIFIED, (ed.) ASME Turbo Expo 2010: Power for Land, Sea, and Air. New York, U.S.A. : American Society of Mechanical Engineers. pp. 273-282. 6 ISBN 9780791844014

Chan, K Y, Ordys, A. and Duran, O (2010) A system to measure gap distance between two vehicles using license plate character height. In: Bolc, Leonard , Tadeusiewicz, Ryszard , Chmielewski, Leszek J. and Wojciechowski, Konrad, (eds.) Computer Vision and Graphics: International Conference, ICCVG 2010 Warsaw, Poland, September 2010 Proceedings, Part 1. Berlin, Germany : Springer. pp. 249-256. (Lecture Notes in Computer Science, 1(6374)) ISSN (print) 0302-9743 ISBN 9783642159091

Gohar, R. and Safa, M. (2010) Fluid film lubrication. In: Rahnejat, H., (ed.) Tribology and dynamics of engine and powertrain. Cambridge, U.K. : Woodhead Publishing. pp. 132-170. ISBN 9781845693619

Gohar, R. and Safa, M. (2010) Measurement of contact pressure under elastohydrodynamic lubrication conditions. In: Rahnejat, H., (ed.) Tribology and dynamics of engine and powertrain. Cambridge, U.K. : Woodhead Publications. pp. 222-245. ISBN 9781845693619

Volkov, Konstantin (2010) Combustion of single aluminium droplet in two-phase flow. In: Stoev, George I., (ed.) Heterogeneous Combustion. Hauppauge NY, U.S.A. : Nova Science. pp. 191-260. (Chemical Engineering Methods and Technology) ISBN 9781617613241

Volkov, Konstantin (2010) Large-eddy simulation of free shear and wall-bounded turbulent flows. In: Lang, Peter R. and Lombargo, Frank S., (eds.) Atmospheric Turbulence, Meteorological Modelling and Aerodynamics. Hauppauge NY, U.S.A. : Nova Science. pp. 505-574. ISBN 9781607410911

Conference or Workshop Item

Ayan, V., Nasr Azadani, S.M. and Limbachiya, M.C. (2010) A new experience in rehabilitation with in-plant asphalt cold recycling. In: 7th International Slurry Surfacing Association World Congress; 13-14 Oct 2010, Lyon, France. (Unpublished)

Bell, M, Cooper, R., Houston, G. and Wang, J (2010) Numerical modelling of acoustic sources. In: RAeS Aerodynamics Conference Applied Aerodynamics: Capabilities and Future Requirements; 27-28 Jul 2010, Bristol, U.K..

Bengherbia, T., Yao, Y., Bauer, P. and Knowlen, C. (2010) Thrust prediction in thermally choked ram accelerator. In: AIAA 48th Aerospace Sciences Meeting; 04-07 Jan 2010, Orlando, FL, USA.

Campelo, Hugh M, Muppala, Siva P.R., Wen, Jennifer X. and Manicham, B (2010) Numerical investigation of laminar burning velocities for various premixed gaseous hydrogen/hydrocarbon/air mixtures. In: The 5th European Conference on Computational Fluid Dynamics; 14 - 17 June 2010, Lisbon, Portugal.

Castagna, Jony and Yao, Yufeng (2010) Development of a multi-block high-order DNS code for turbulent flow simulations. In: 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics; 19-23 Jul 2009, Sydney, Australia. (Unpublished)

Chang, N., Yang, W., Wang, J. and Wang, W. (2010) Design optimization of composite wing box for flutter and stiffness. In: 48th AIAA Aerospace Sciences Meeting, Including the New Horizons Forum and Aerospace Exposition; 4 - 7 Jan 2010, Orlando, Florida, U.S.. (Unpublished)

David-West, O. S., Wang, J and Cooper, R. (2010) Finite element model updating of a thin wall enclosure under impact excitation. In: 7th BSSM International Conference on Advances in Experimental Mechanics,; 07 - 09 September 2010, Liverpool, U.K..

Dembele, S., Rosario, R., Wen, J.X., Williams, I. and Warren, P. D. (2010) Thermal and stress analysis of glazing systems under fire conditions. In: 12th International Fire Science & Engineering Conference (INTERFLAM 2010); 5-7 Jul 2010, Nottingham, U.K..

Donchev, Ted and Nabi, Parviz (2010) Non-bolted anchorage systems for CFRP laminates applied for strengthening of RC slabs. In: 5th International Conference on Composites in Civil Engineering; 27-29 Sept 2010, Beijing, China.

Dykes, A.P. (2010) Rock slope instability in England's Lake district. In: International Conference - Mountain Risks: Bringing Science to Society; 24 - 26 Nov 2010, Firenze, Italy.

Dykes, Alan (2010) Overview: What is Peat? In: Seminar: Peat Stability; 7 Oct 2010, Dublin, Ireland.

Khalili, S. M. R., Tavakolian, M. and Sarabi, A. (2010) Mechanical properties of nanoclay reinforced epoxy adhesive bonded joints made with composite materials. In: 3rd International Conference of Adhesion Science and Technology on Advanced Computational Engineering and Experimenting (ACE-X 2009); 22-23 Jun 2009, Rome, Italy. (Unpublished)

Laila, Dina Shona (2010) A note on human body weight dynamics and control based on the macronutrient and energy flux balance. In: 2010 American Control Conference (ACC); 30 Jun - 2 Jul 2010, Baltimore, Maryland, USA. (Unpublished)

Limbachiya, M.C. and Fotiadou, S. (2010) Recycling glass waste for reuse in concrete construction. In: First International Conference on Sustainable Urbanization; 15-17 Dec 2010, Kowloon, Hong Kong. (Unpublished)

Majrouhi Sardroud, J and Limbachiya, M.C. (2010) Effective information delivery at construction phase with integrated application of RFID, GPS and GSM Technology. In: World Congress on Engineering 2010; 30 Jun - 2 Jul 2010, London, UK.

Majrouhi Sardroud, J and Limbachiya, M.C. (2010) Improving construction supply chain management with integrated application of RFID technology and portal system. In: The 8th International Conference on Logistics and SCM Research (RIRL 2010); 29 Sept - 01 Oct 2010, Bordeaux, France. (Unpublished)

Majrouhi Sardroud, J and Limbachiya, Mukesh C. (2010) Integrated advance data storage technology for effective construction logistics management. In: 27th International Symposium on Automation and Robotics in Construction; 25-27 June 2010, Bratislava, Slovakia.

Majrouhi Sardroud, J., Limbachiya, M.C. and Saremi, A.A. (2010) Ubiquitous tracking and locating of construction resource using GIS and RFID. In: 6th GIS Conference & Exhibition (GIS 88); 6 Jan 2010, Tehran, Iran.

Maleki, A, Donchev, T., Hadavinia, H. and Cheah, A (2010) Behaviour of steel shear wall systems with cut-outs and stiffeners. In: International Conference on Structures & Architecture; 21 -23 July 2010, Guimaraes, Portugal. ISBN 9780415492492

Muppala, S.P.R., Badiger, R., Manickam, B and Wen, J.X. (2010) RANS simulation of high-pressure premixed, turbulent lean flames in PSI combustor. In: 8th Asia-Pacific Conference on Combustion; 10 - 13 Dec, 2010, Hyderabad, India.

Omer, J. R. (2010) Implementation of approximate and finite element methods to predict negative skin friction and settlement of piles induced by ground water lowering. In: Second International Conference on Geotechnical Engineering; 25-27 October 2010, Hammamet, Tunisia.

Omer, Joshua R. (2010) A numerical model for load transfer and settlement of bored cast in-situ piles. In: 35th Annual Conference on Deep Foundations; 12-15 Oct 2010, Hollywood, U.S.A..

Pereira, J.M., Ghasemnejad, H., Wen, J., Lourenco, P. and Tam, V.H.Y. (2010) Blast resistance of cracked steel structures repaired with CFRP composite patch. In: 8th National Conference on Seismology and Earthquake Engineering; 20-23 Oct 2010, Aveiro, Portugal. (Unpublished)

Rao, M., Wen, J.X. and Tam, V.H.Y. (2010) Numerical simulation of turbulent flame-wall quenching using coherent flamelet model. In: Eighth International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions; 05-10 Sep 2010, Yokohama, Japan.

Rumschinski, P, Laila, D. S., Borchers, S. and Findeisen, R. (2010) Influence of discretization errors on set based parameter estimation. In: 49th IEEE Conference on Decision and Control; 15-17 Dec. 2010, Altlanta, Georgia, USA. ISBN 9781424477456

Sayari, A, Donchev, T., Limbachiya, M.C. and Kew, H.Y. (2010) Out-of-Plane behaviour of FRP strengthened masonry walls. In: 8th International Masonry Conference- Innovative Solutions for Sustainable Masonry Construction; 4 - 7 July 2010, Dresden, Germany.

Shakouri, Payman, Ordys, Andrzej, Askari, Mohamad and Laila, Dina (2010) Longitudinal vehicle dynamics using Simulink/Matlab. In: UKACC International Conference on Control; 07 - 11 Sept 2000, Cambridge, U.K..

Shaw, Peter and Lappas, Vaios (2010) Modeling of a pulsed plasma thruster : simple design, complex matter. In: Space Propulsion Conference; 03-06 May 2010, San Sebastian, Spain.

Suzuki, M, Meddah, M S, Sato, R and Kawabata, T (2010) Long-term shrinkage and stress in ultra high strength concrete using porous ceramic waste for internal curing. In: Use of superabsorbent polymers and other new additives in concrete, International RILEM Conference; 15-18 Aug 2010, Lyngby, Denmark.

Volkov, Konstantin (2010) Interaction of laser pulse with oxygen and hydrogen mixture containing metal particles. In: IMA Conference on Fluid Problems in Process Engineering; 06 - 08 September 2010, Leeds, U.K..

Volkov, Konstantin (2010) Internal turbulent two-phase flows formed by wall injection of fluid and particles. In: 5th European Conference on Computational Fluid Dynamics (ECCOMAS CFD 2010); 14-17 June 2010, Lisbon, Portugal.

Xu, B., Chen, Z., Wen, J.X. and Dembele, S. (2010) Large eddy simulation of fire dynamics using a mixture fraction based discrete reaction model. In: International Congress "Combustion and Fire Dynamics"; 20-23 Oct 2010, Santander, Spain. (Unpublished)

Xu, B.P., Chen, Z.B., Wen, J.X., Zhubrin, S., Dembele, S., Wang, Y. and Dorofeev, S. (2010) Large eddy simulation of a one meter diameter methane fire using the extended discrete reaction model. In: Sixth International Seminar on Fire and Explosion Hazards; 11-16 April 2010, Leeds, UK. (Unpublished)

Yao, J., Sian, S., Khan, J. and Yao, Y. (2010) Effect of hole shape on blade cooling effectiveness. In: AIAA 48th Aerospace Sciences Meeting; 04-07 Jan 2010, Orlando, FL, USA.

Thesis

Castagna, Jony (2010) Direct numerical simulation of turbulent flows over complex geometries. (PhD thesis), Kingston University, .

Oliveira, Carlos A. Grassmann R. (2010) Water supply to Portuguese regional hospitals : a contribution for the knowledge of the water consumption patterns in Portuguese regional hospitals. (PhD thesis), Kingston University, .

Petkova, Diana (2010) Behaviour of RC beams strengthened with CFRP laminates at elevated temperatures. (PhD thesis), Kingston University, .

Yao, Jun (2010) Numerical and experimental studies of gas/liquid two-phase flow in a turbocharger. (PhD thesis), Kingston University, .

Zhu, Xiaomeng (2010) Combustion synthesis of Ni, Al and NiAl based composites by induction heating. (PhD thesis), Kingston University, .