Items where Research Area is "General engineering and mineral and mining engineering"

Up a level
Export as [feed] Atom [feed] RSS
  • Research Areas (273)
    • General engineering and mineral and mining engineering (273)
Group by: First Author/Editor | Item Type | Year
Jump to: A | B | C | D | E | F | G | H | K | L | M | N | O | P | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 273.

A

Adjali, M.H. and Laurent, M. (2007) Thermal conductivity estimation in non-linear problems. International Journal of Heat and Mass Transfer, 50(23-24), pp. 4623-4628. ISSN (print) 0017-9310

Adjali, M.H., Davies, M. and Rees, S.W. (2004) A comparative study of design guide calculations and measured heat loss through the ground. Building and Environment, 39(11), pp. 1301-1311. ISSN (print) 0360-1323

Adjali, M.H., Davies, M., Rees, S.W. and Littler, J. (2000) Temperatures in and under a slab-on-ground floor: two- and three-dimensional numerical simulations and comparison with experimental data. Building and Environment, 35(7), pp. 655-662. ISSN (print) 1360-1323

Adjali, M.H., Davies, M. and Littler, J. (1999) A numerical simulation of measured transient temperatures in the walls, floor and surrounding soil of a buried structure. International Journal of Numerical Methods for Heat & Fluid Flow, 9(4), pp. 405-423. ISSN (print) 0961-5539

Adjali, M.H., Davies, M. and Littler, J. (1998) Three-dimensional earth-contact heat flows: a comparison of simulated and measured data for a buried structure. Renewable Energy, 15(1-4), pp. 356-359. ISSN (print) 0960-1481

Adnan, A, Cazan, A, Safa, M., Lung, A. W. M. and Williams, G. (2009) Evaluation of potential manufacturing suppliers using analytical hierarchy process and cluster analysis for benchmarking. International Journal of Security, 3(3), pp. 36-47. ISSN (online) 1985-2320

Adnan, A, Cazan, A, Safa, M. and Lung, A. W. M. (2009) Guidelines for benchmarking and manufacturing level agreement for outsourcing. In: Advances in Computing and Technology; Jan 2009, London, U.K.. ISBN 9780955000867

Aghajani, Hamed, Dembele, Siaka and Wen, Jennifer (2014) Analysis of a semi-empirical sprinkler spray model. Fire Safety Journal, 64, pp. 1-11. ISSN (print) 0379-7112

Ahmadi, H, Liaghat, GH. and Hadavinia, H. (2016) Investigation on tensile properties of plain and nanoclay reinforced syntactic foams. International Journal of Composite Materials, 6(1), pp. 34-41. ISSN (print) 2166-479X

Al-Khazali, H.A. and Askari, M.R. (2012) Importance of using vibration signal characteristics for the diagnosis of rotor vibrations. In: ICAST 2012, 23rd International Conference on Adaptive Structures and Technologies; 11-13 October 2012, Nanjing, China. (Unpublished)

Alam, M., Singh, H. and Limbachiya, M.C. (2011) Vacuum insulation panels (VIPs) for building construction industry: a review of the contemporary developments and future directions. Applied Energy, 88(11), pp. 3592-3602. ISSN (print) 0306-2619

Allouis, E., Ellery, A. and Welch, C.S. (2006) Entry descent and landing systems for small planetary missions: parametric comparison of parachutes and inflatable systems for the proposed Vanguard Mars mission. Acta Astronautica, 59(8-11), pp. 911-922. ISSN (online) 0094-5765

Allouis, E., Ellery, A. and Welch, C.S. (2003) Entry descent and landing systems for small planetary missions: parametric comparison of parachutes and inflatable systems for the proposed Vanguard Mars mission. In: Fifth IAA International Conference on Low-Cost Planetary Missions; 24 - 26 Sep 2003, Noordwijk, Netherlands.

Aluri, N.K., Muppala, S. and Dinkelacker, F. (2008) Large-eddy simulation of lean premixed turbulent flames of three different combustion configurations using a novel reaction closure. Flow, Turbulence and Combustion, 80(2), pp. 207-224. ISSN (print) 1386-6184

Aluri, N.K., Sha, Q, Muppala, S.P.R. and Dinkelacker, F. (2005) Flame surface density models - A numerical evaluation. In: European Combustion meeting; 3 - 6 Apr 2005, Louvain-la-Neuve, Belgium.

Aluri, N.K., Pantangi, P.K.G., Muppala, S.P.R. and Dinkelacker, F. (2005) A numerical study promoting algebraic models for the Lewis number effect in atmospheric turbulent premixed Bunsen flames. Flow, Turbulence and Combustion, 75(1-4), pp. 149-172. ISSN (print) 1386-6184

Aluri, Naresh K., Muppala, S.P. Reddy and Dinkelacker, Friedrich (2006) Substantiating a fractal-based algebraic reaction closure of premixed turbulent combustion for high pressure and the Lewis number effects. Combustion and Flame, 145(4), pp. 663-674. ISSN (online) 0010-2180

Anderson, John E. (1996) The Neogene structural evolution of the western margin of the Pelagian platform, central Tunisia. Journal of Structural Geology, 18(6), pp. 819-833. ISSN (print) 0191-8141

Arahchige, Buddhi, Ghasemnejad, Hessam and Augousti, Andre (2015) Investigating effect on contact stiffness on the low velocity impact response of curved composite plate. In: 6th International Conference on Theoretical and Applied Mechanics (TAM '15); 27-29 Jun 2015, Salerno, Italy.

Aviram, D.P., Fried, A.N. and Roberts, J.J. (2001) Thermal properties of a variable cavity wall. Building and Environment, 36(9), pp. 1057-1072. ISSN (print) 0360-1323

Ayan, V., Limbachiya, M.C. and Nasr Azadani, S.M. (2011) Influence of recycled concrete aggregates on specific gravity and absorption rates of mixes. In: 26th International Conference on Solid Waste Technology and Management; 27-30 Mar 2011, Philadelphia, PA, U.S.A..

Ayan, V., Azadani, S.M.N., Omer, J. R. and Limbachiya, M.C. (2011) A study into the absorption property of recycled concrete and reclaimed asphalt pavement mixes. In: 5th International Conference: Bituminous Mixtures and Pavements; 1-3 June 2011, Thessaloniki, Greece. (Unpublished)

Ayan, V., Nasr Azadani, S.M. and Limbachiya, M.C. (2010) A new experience in rehabilitation with in-plant asphalt cold recycling. In: 7th International Slurry Surfacing Association World Congress; 13-14 Oct 2010, Lyon, France. (Unpublished)

Ayan, V., Khavandi, A. and Nikzad Gharehaghaji, A. (2009) In-plant asphalt cold recycling in rehabilitation of Babaei expressway project. In: Loizos, Andreas , Partl, Manfred N. , Scarpas, Tom and Alqadi, Imad L., (eds.) Advanced Testing and Characterization of Bituminous Materials. Wiltshire : Taylor & Francis Group, London. pp. 1169-1178. ISBN 9780415558549

Ayan, Vahid, Khavandi, Alireza, Omer, Joshua and Limbachiya, Mukesh (2016) Toughness performance of recycled aggregates for use in road pavement. International Journal of Transportation Engineering, 3(3), pp. 171-180. ISSN (print) 2322-259X

Ayan, Vahid, Omer, Joshua R., Limbachiya, Mukesh C. and Azadani, Seyed Masoud Nasr (2012) Water absorption and frost heaving of recycled aggregates. Proceedings of the Institution of Civil Engineers - Construction Materials, ISSN (print) 1747-650X

B

Benhadj, R., Marir, F. and Roome, L. (2000) Performance tests characteristic of a pneumatic proximity tactile array sensing device. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of engineering manufacture, 214(10), pp. 901-914. ISSN (print) 0954-4054

Benhadj, R. and Roome, R.L. (2000) Pneumatic proximity-to-tactile imaging device. Sensor Review, 20(1), pp. 36-42. ISSN (print) 0206-2288

Blackman, B.R.K., Hadavinia, H., Kinloch, A.J. and Williams, J.G. (2003) The use of a cohesive zone model to study the fracture of fibre composites and adhesively-bonded joints. International Journal of Fracture, 119(1), pp. 25-46. ISSN (print) 0376-9429

Boustras, G., Wen, J.X. and Fraser-Mitchell, J.N. (2004) The investigation of fire growth in dwellings based on stochastic analysis. Journal of Applied Fire Science, 12(4), pp. 311-334. ISSN (print) 1044-4300

Briggs, A, Wen, J.X. and Rose, J W (1992) Accurate heat-transfer measurements for condensation on horizontal integral-fin tubes. ASME Journal of Heat Transfer, 114(3), pp. 719-726.

Bromhead, E.N., Ibsen, M-L. and Dykes, A.P. (2016) The Miramar landslide at Herne Bay and the storm surge of 1953. In: 12th International Symposium on Landslides; 12 - 19 Jun 2016, Napoli, Italy. (In Press)

Bromhead, E.N. and Ibsen, M.-L. (2004) Bedding-controlled coastal landslides in Southeast Britain between Axmouth and the Thames Estuary. Landslides, 1(2), pp. 131-141. ISSN (print) 1612-510X

Bullen, P.R., Cheeseman, D.J., Hussain, L.A. and Ruffell, A.E. (1987) The determination of pipe contraction pressure loss coefficients for incompressible turbulent-flow. International Journal of Heat and Fluid Flow, 8(2), pp. 111-118. ISSN (print) 0142-727X

C

Cairns, R, Kew, H.Y. and Kenny, M.J. (2004) The Use of Recycled Rubber Tyres in Concrete Construction. (Technical Report) The Onyx Environmental Trust. (Onxy Environmental Trust Final Report , University of Strathclyde)

Campelo, Hugh M, Muppala, Siva P.R., Wen, Jennifer X. and Manicham, B (2010) Numerical investigation of laminar burning velocities for various premixed gaseous hydrogen/hydrocarbon/air mixtures. In: The 5th European Conference on Computational Fluid Dynamics; 14 - 17 June 2010, Lisbon, Portugal.

Chalkley, A.M., Billett, E., Harrison, D. and Simpson, G. (2003) Development of a method for calculating the environmentally optimum lifespan of electrical household products. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of engineering manufacture, 217(11), pp. 1521-1532. ISSN (online) 0954-4054

Chan, KinYip, Ordys, Andrzej and Hersi, Adnan (2009) Driver assistance system based on single camera. In: Set for Britain; 09 Mar 2009, London, U.K..

Chen, J., Wang, J. and Cassidy, M. (2009) Experiment study and design of moveable partition wall. In: 3rd International Conference on Integrity, Reliability and Failure; 20-24 Jul 2009, Porto, Portugal. (Unpublished)

Chen, Z.B., Wen, J.X., Xu, B.P. and Dembele, S. (2011) The extension of the eddy dissipation concept (EDC) to the LES framework in FireFOAM. In: FM Global Open Source CFD Fire Modeling Workshop; 9-10 May 2011, Norwood, USA. (Unpublished)

Chen, Z.B., Dembele, Siaka, Wen, Jennifer and Tam, V.H.Y. (2009) Towards large eddy simulation of LNG pool fires. In: Hazards XXI: Process Safety and Environmental Protection in a Changing World; 10-12 Nov 2009, Manchester, U.K.. ISBN 9780852955369

Chen, Zhibin, Wen, Jennifer, Xu, Baopeng and Dembele, Siaka (2014) Extension of the eddy dissipation concept and smoke point soot model to the LES frame for fire simulations. Fire Safety Journal, 64, pp. 12-26. ISSN (print) 0379-7112

Chen, Zhibin, Wen, Jennifer, Xu, Baopeng and Dembele, Siaka (2014) Large eddy simulation of a medium-scale methanol pool fire using the extended eddy dissipation concept. International Journal of Heat and Mass Transfer, 70, pp. 389-408. ISSN (print) 0017-9310

Chen, Zhibin, Wen, Jennifer, Xu, Baopeng and Dembele, Siaka (2011) Large eddy simulation of fire dynamics with the improved eddy dissipation concept. In: 10th International IAFSS Symposium; 19-24 June 2011, Maryland, USA. (Unpublished)

Chen, Zhibin, Satoh, Kohyu, Wen, Jennifer, Huo, Ran and Hu, Longhua (2009) Burning behavior of two adjacent pool fires behind a building in a cross-wind. Fire Safety Journal, 44(7), pp. 989-996. ISSN (print) 0379-7112

D

David-West, O. S., Wang, J and Cooper, R. (2010) Finite element model updating of a thin wall enclosure under impact excitation. In: 7th BSSM International Conference on Advances in Experimental Mechanics,; 07 - 09 September 2010, Liverpool, U.K..

David-West, O. S., Wang, J., Gault, R. and Cooper, R. (2009) Numerical and experimental based comparison of the dynamic properties of enclosures with and without hole. In: The Sixteenth International Congress on Sound and Vibration; 5-9 July 2009, Krakow, Poland. (Unpublished)

Davies, M., Zoras, S. and Adjali, M.H. (2001) Improving the efficiency of the numerical modelling of built environment earth-contact heat transfers. Applied Energy, 68(1), pp. 31-42. ISSN (online) 0306-2619

Dehmeshki, J., Daemi, M.F., Atkin, B.P. and Miles, N.J. (1995) An adaptive estimation and segmentation technique for determination of major maceral groups in coal. In: Third International Computer Science Conference ICSC '95; 11 - 13 Dec 1995, Hong Kong, China.

Dembele, S. and Wen, J.X. (2014) Analysis of the screening of hydrogen flares and flames thermal radiation with water sprays. International Journal of Hydrogen Energy, 39(11), pp. 6146-6159. ISSN (print) 0360-3199

Dembele, S., Rosario, R., Wen, J.X., Williams, I. and Warren, P. D. (2010) Thermal and stress analysis of glazing systems under fire conditions. In: 12th International Fire Science & Engineering Conference (INTERFLAM 2010); 5-7 Jul 2010, Nottingham, U.K..

Dembele, S., Zhang, J. and Wen, J. (2007) Exploratory study of underexpanded sonic hydrogen jets. In: 5th International Seminar on Fire and Explosion Hazards; 23-27 Apr 2007, Edinburgh, UK. (Proceedings of the 5th International Seminar on Fire and Explosion Hazards)

Dembele, S., Zhang, J. and Wen, J.X. (2005) Assessments of spectral narrow band and weighted-sum-of-gray-gases models for computational fluid dynamics simulations of pool fires. Numerical Heat Transfer Part B, 48(3), pp. 257-276. ISSN (print) 1040-7790

Dembele, S. and Wen, J. (2005) Predicting Glazing Behaviour in a Fire Environment - Effect of Radiation Models. FABIG Newsletter, R570(45),

Dembele, S. and Wen, J.X. (2003) Evaluation of fast correlated-k approach for radiation calculations in combustion systems. Numerical Heat Transfer Part B, 44(4), pp. 365-385. ISSN (print) 1040-7790

Dembele, S., Zhang, J. and Wen, J. X. (2003) Evaluation of the correlated-k and other gas radiation models for combustion applications. Proceedings of the Seventh International Symposium Fire Safety Science, 7, pp. 927-938.

Dembele, S., Wen, Jennifer and Sacadura, J.-F. (2001) Experimental study of water sprays for the atttenuation of fire thermal radiation. Journal Of Heat Transfer, 123(3), pp. 534-543. ISSN (print) 0022-1481

Dembele, S. and Wen, J.X. (2000) Predicting the mass burning rates of liquid pool fires using CFD techniques. International Symposium on Combustion, Abstracts of Accepted Papers, B, p. 67. ISSN (print) 1540-7489

Dembele, S., Delmas, A. and Sacadura, JF (1997) A method for modeling the mitigation of hazardous fire thermal radiation by water spray curtains. Journal Of Heat Transfer, 119(4), pp. 746-753. ISSN (print) 0022-1481

Dembele, Siaka, Rosario, Ricardo, Wen, Jennifer, Warren, Paul and Dale, Stuart (2008) Simulation of glazing behavior in fires using computational fluids dynamics and spectral radiation modeling. In: 9th International IAFSS Symposium; 21-26 Sept 2008, Karlsruhe, Germany.

Dembele, Siaka, Rosario, R.A.F. and Wen, J.X. (2007) Investigation of glazing behavior in a fire environment using a spectral discrete ordinates method for radiative heat transfer. Numerical Heat Transfer Part B, 52(6), pp. 489-506. ISSN (print) 1040-7790

Dembele, Siaka and Wen, Jennifer (2003) Predicting Glazing Behaviour in a Fire Environment – Effect of Radiation Heat Transfer Models. FABIG Newsletter(45), R570.

Den Adel, H., Koenders, M. and Bakker, K.J. (1994) The analysis of relaxed criteria for erosion-control filters. Canadian Geotechnical Journal (CGJ), 31(6), pp. 829-840. ISSN (print) 0008-3674

Desai, Satish B. and Limbachiya, Mukesh C. (2006) Coarse recycled aggregate: a sustainable concrete solution. Indian Concrete Journal, 80(7), pp. 17-23. ISSN (print) 0019-4565

Dhir, R.K., McCarthy, M.J., Limbachiya, M.C., El Sayad, I. and Zhang, D.S. (1999) Pulverized fuel ash concrete: air-entrainment and freeze/thaw durability. Magazine of Concrete Research, 51(1), pp. 53-64. ISSN (print) 0024-9831

Dhir, R.K., Limbachiya, M.C. and Leelawat, T. (1999) Suitability of recycled concrete aggregate for use in BS5328 designated mixes. Proceedings of the Institution of Civil Engineers - Structures and buildings, 134(3), pp. 257-274. ISSN (print) 0965-0911

Diaz-Diaz, Luis Maria, Omer, Joshua and Arias, Daniel (2016) Finite element analysis of an underground collector installed by pipe-jacking method. International Journal of Geotechnical Engineering, ISSN (print) 1938-6362 (In Press)

Diaz-Diaz, Luis Maria, Omer, Joshua, Arias, Daniel and Pando, Luis (2016) Finite element analysis of an underground collector installed by pipe-jacking method. In: European Geosciences Union General Assembly 2016; 17-22 Apr 2016, Vienna, Austria.

Dinkelacker, Friedrich, Manickam, B, Aluri, N.K., Muppala, S.P.R. and Wen, J.X. (2008) Modelling and simulation of lean premixed turbulent Methane/Hydrogen/Air Flames for two flow configurations. In: CHT-08 ICHMT International Symposium on Advances in Computational Heat Transfer; 11-16 May 2008, Marrakesh, Morocco.

Duran, O and Petrou, M (2006) Statistical assessment for real-time background class identification in hyperspectral images. In: IEEE International Geoscience and Remote Sensing Symposium (IGARSS06); 31 July - 4 August 2006, Denver, USA. (IEEE International Symposium on Geoscience and Remote Sensing (IGARSS))

Duran, Olga, Petrou, Maria, Hathaway, David and Nothard, Joanne (2006) Anomaly detection through adaptive background class extraction from dynamic hyperspectral data. In: Signal Processing Symposium, NORSIG 2006; 7-9 June 2006, Rejkjavik, Iceland.

Dykes, A.P., Ibsen, M-L. and Bromhead, E.N. (2016) A new assessment of the Southwell Topple of 1734. In: 12th International Symposium on Landslides; 12 - 19 Jun 2016, Napoli, Italy. (Unpublished)

Dykes, Alan P and Gunn, J (2006) Hoga island, Sulawesi, Indonesia: geomorphology and groundwater resources of a small tropical carbonate island. Cave and Karst Science, 33(1), pp. 21-28. ISSN (print) 1356-191X

Dykes, Alan P. and Warburton, Jeff (2007) Geomorphological and subsurface drainage controls on failures of peat-covered hillslopes triggered by extreme rainfall. Earth Surface Processes and Landforms, 32(12), pp. 1841-1862.

E

Edwards, A.P.R., Osborne, B.P., Stolzfus, J.M. and Howes, T. (2002) Instabilities and drop formation in cylindrical liquid jets in reduced gravity. Physics of fluids, 14(10), pp. 3432-3438. ISSN (print) 1070-6631

Eleftherios-Stamatios, Telis, Besseris, George J., Stergiou, Constantinos and Limbachiya, Mukesh (2016) Cost and safety optimisation in 'Berlin' type retaining walls. International Journal of Structural Engineering, 7(4), pp. 355-366. ISSN (print) 1758-7328

Ellery, A.A., Cockell, C.S., Edwards, H.G.M., Dickensheets, D.L. and Welch, C.S. (2002) Vanguard - a proposed European astrobiology experiment on Mars. International Journal of Astrobiology, 1(3), pp. 191-199. ISSN (print) 1473-5504

England, J., Hadavinia, H., Marchant, D.R. and Aboutorabi, A. (2010) Design of Automotive Metal and Composite Chassis Structures. Recent Patents on Mechanical Engineering, 3(3), pp. 211-225. ISSN (print) 2212-7976

Eslami, Abolfazl, Pirouzi, Arash, Omer, J.R. and Shakeran, Mahdi (2015) CPT-based evaluation of blast densification (BD) performance in loose deposits with settlement and resistance considerations. Geotechnical and Geological Engineering, ISSN (print) 0960-3182 (Epub Ahead of Print)

Evangelou, L.D., Self, A.W., Allen, J.E. and Lo, S. (2001) Trimmed deep stall on the F-16 Fighting Falcon. The Aeronautical Journal, 105(1054), pp. 679-683. ISSN (print) 0001-9240

F

Ferraris, S., Wen, J.X. and Dembele, S. (2005) Large-eddy simulation of a large-scale methane pool fire. Fire Safety Science, 8, pp. 963-974.

Ferraris, S.A., Madga, I and Wen, J.X. (2009) Large eddy simulation of the backdraft phenomenon and its mitigation in compartment fires with different opening geometries. Combustion Science and Technology, 181(6), pp. 853-876. ISSN (print) 0010-2202

Ferraris, S.A., Wen, J.X. and Dembele, S. (2008) Large eddy simulation of the backdraft phenomenon. Fire Safety Journal, 43(3), pp. 205-225. ISSN (print) 0379-7112

Ferraris, S.A. and Wen, J.X. (2007) Large eddy simulation of a lifted turbulent jet flame. Combustion and Flame, 150(4), pp. 320-339. ISSN (print) 0010-2180

Firoozfar, Alireza, Bromhead, Edward N. and Dykes, Alan P. (2012) Caspian sea level change impacts regional seismicity. Journal Of Great Lakes Research, 38(4), pp. 667-672. ISSN (print) 0380-1330

Fotiadou, S, Limbachiya, M C, Fried, A N and Roberts, J J (2004) Use of foamed glass gravel in construction. In: Sustainable Waste Management and Recycling; 14 - 15 Sep 2004, Kingston upon Thames, U.K..

Fried, A.N., Tovey, A.K and Roberts, J.J. (2005) Comparison of current approaches to the design of masonry diaphragm walls. Masonry International, 18(2), pp. 55-66. ISSN (print) 0950-2289

Fried, A.N. (2001) Enhancements to the resisting moment of unreinforced masonry walls due to shifts in the neutral axis position. The Structural Engineer, 79(1), pp. 14-18. ISSN (online) 1466-5123

Fudge, C.A. and Limbachiya, M.C. (2006) Briefing: Aircrete. Proceedings of the Institution of Civil Engineers Construction Materials, 159(2), 49 -51. ISSN (print) 1747-650X

G

Gaspar, Neil and Koenders, M.A. (2001) Micromechanic formulation of macroscopic structures in a granular medium. Journal of Engineering Mechanics, 127(10), pp. 987-993. ISSN (print) 0733-9399

Gault, R., Cooper, R., David-West, O. S., Wang, J. and Tournour, M. (2009) Near-field acoustic holography applied to a loudspeaker pseudo engine source. In: The Sixteenth International Congress on Sound and Vibration; 5-9 July 2009, Krakow, Poland. (Unpublished)

Gault, R., Cooper, R., Boyle, M., Wang, J. and Tournour, M. (2009) A comparative study of near-field acoustic holography and intensity techniques applied to a loudspeaker source. In: The Sixteenth International Congress on Sound and Vibration; 5-9 July 2009, Krakow, Poland. (Unpublished)

Gault, R., Cooper, R., Wang, J. and Collin, G. (2008) Using virtual engineering techniques to aid with design trade-off studies for an enclosed generator set. In: 15th ISPE International Conference on Concurrent Engineering; 18-22 Aug 2008, Belfast, Northern Ireland.

Gawne, D.T., Zhang, T. and Liu, B. (2002) Computational analysis of the influence of a substrate, solid shield and gas shroud on the flow field of a plasma jet. Surface and Coatings Technology, 153(2-3), pp. 138-147. ISSN (print) 0257-8972

Georgiou, I., Hadavinia, H., Ivankovic, A., Kinloch, A.J., Tropsa, V. and Williams, J.G. (2003) Cohesive zone models and the plastically deforming peel test. Journal of Adhesion, 79(3), pp. 239-265. ISSN (print) 0021-8464

Ghasemnejad, H. (2014) Explicit finite element methods in modelling of crushing process of FRP composite absorbers. In: 7th International Conference on Finite Differences, Finite Elements, Finite Volumes and Boundary Elements (F-and-B '14); 15-17 May 2014, Gdansk - Poland.

Ghasemnejad, H. and Mirzaii, H. (2014) A robust finite element technique to model interlaminar damage in composite wind turbine blade materials. In: World Renewable Energy Congress XIII and Exhibition 2014; 3-8 Aug 2014, London, UK.

Ghasemnejad, H. and Hadavinia, H. (2010) Off-axis crashworthiness characteristic of woven glass/epoxy composite box structures. Journal of Reinforced Plastics and Composites, 29(15), pp. 2306-2330. ISSN (print) 0731-6844

Ghasemnejad, H., Hadavinia, H. and Simpson, G. (2007) Crashworthiness optimization of crash box in automotive structure. Key Engineering Materials, 348-34, pp. 661-664. ISSN (print) 1013-9826

Godwin, Adrian, Ordys, A., Francik, Jaroslaw, Curley, Andrew, Smolenski, Piotr and Burley, Richard (2010) A multidisciplinary knowledge transfer partnership in development of lift simulator. In: Howlett, Robert James, (ed.) Innovation through knowledge transfer. Berlin, Germany : Springer. pp. 115-123. (Smart Innovation, Systems and Technologies, no. 5) ISSN (print) 2190-3018 ISBN 9783642145933

Goraj, Z., Frydrychewicz, A., Ransom, E.C.P., Self, A. and Wagstaff, P. (2001) Aerodynamic, dynamic and conceptual design of a fire-fighting aircraft. Journal Of Aerospace Engineering - Part G, 215(3), pp. 125-146. ISSN (print) 0954-4100

Gordnian, K., Hadavinia, H., Mason, P.J. and Madenci, E. (2008) Determination of fracture energy and tensile cohesive strength in Mode I delamination of angle-ply laminated composites. Composite Structures, 82(4), pp. 577-586. ISSN (print) 0263-8223

Gordnian, K., Hadavinia, H. and Karwatzki, J. (2006) Effect of transverse shear on deformation of thick laminated sandwich plates. Key Engineering Materials, 324-32, pp. 279-282. ISSN (print) 1013-9826

Gwane, D.T., Liu, B., Bao, Y. and Zhang, T. (2005) Modelling of plasma-particle two-phase flow using statistical techniques. Surface and Coatings Technology, 191(2-3), pp. 242-254. ISSN (print) 0257-8972

H

Hadavinia, H., Gordnian, K., Karwatzki, J. and Aboutorabi, A. (2006) Deriving shear correction factor for thick laminated plates using the energy equivalence method. Structural Durability & Health Monitoring, 2(4), pp. 197-206. ISSN (print) 1930-2983

Hay, G.I., Southee, D.J., Evans, P.S.A., Harrison, D.J., Simpson, G.B. and Wood, J. (2009) A time-strain monitoring system fabricated via offset lithographic printing. Smart Materials and Structures, 18(1), 015015. ISSN (print) 0964-1726

Hay, G.I., Evans, P.S.A., Harrison, D.J., Southee, D., Simpson, G. and Harrey, P.M. (2005) Characterization of lithographically printed resistive strain gauges. IEEE Sensors Journal, 5(5), pp. 864-871. ISSN (print) 1530-437x

Hay, Gareth I., Southee, Darren J., Evans, Peter S.A., Harrison, David J., Simpson, George and Ramsey, Blue J. (2007) Examination of silver-graphite lithographically printed resistive strain sensors. Sensors and Actuators A Physical, 135(2), pp. 534-546. ISSN (print) 0924-4247

Heidari, A., Ferraris, S., Wen, J.X. and Tam, V.H.Y. (2011) Numerical simulation of large scale hydrogen detonation. International Journal of Hydrogen Energy, 36(3), pp. 2538-2544. ISSN (print) 0360-3199

Heidari, A., Ferraris, S., Wen, J.X. and Tam, V.H.Y. (2011) Numerical simulation of large scale hydrogen detonation. In: 3rd International Conference on Hydrogen Safety; 16-18 Sept 2009, Ajaccio-Corsica, France.

Heidari, A. and Wen, J.X. (2011) Numerical simulations of large scale hemispherical and pancake cloud detonation. In: International Colloquium on the Dynamics of Explosions and Reactive Systems (ICDERS), University of California, Irvine; 24-29 July 2011, Irvine, U.S.A..

Heidari, Ali (2012) Numerical simulation of deflagration to detonation transition in hydrogen explosion. (PhD thesis), Kingston University.

Horikiri, K and Yao, Y. (2011) Validation study of convective airflow in an empty room. In: 2nd INEEE Conference : Energy, Environment, Devices, Systems, Communications, Computers (EEDSCC '11); 2011 (March 7-10), Venice, Italy.

Hosseini, Rahil and Mazinani, Mahdi (2007) A Practical Approach for Measuring IT-Effectiveness in Business Processes. In: IEEE International Conference on e-Business Engineering; 24-26 Oct. 2007, Hong Kong. ISBN 9780769530031

Hosseyni, S, Bromhead, E.N., Majrouhi Sardroud, J, Limbachiya, M.C. and Riazi, M. (2011) Integrated RFID and sensor technologies for effective landslide monitoring and early warning. In: 6th International Structural Engineering and Construction Conference; 21-26 June 2011, Zurich, Switzerland.

Hosseyni, S, Bromhead, E.N., Majrouhi Sardroud, J, Limbachiya, M.C. and Riazi, M. (2011) Real-time landslides monitoring and warning using RFID technology for measuring ground water level. In: 2nd International Conference on Disaster Management and Human Health: Reducing Risk, Improving Outcomes; 11-13 May 2011, Orlando, USA.

Hosseyni, Seyyed Mahdi (2012) Residual shear strength of clays in landslides in southern Britain. (PhD thesis), Kingston University.

Huang, L.Y., Wen, J.X., Karayiannis, T G and Matthews, R D (1998) Numerical prediction of high efficiency boiler heat exchanger performance. Applied Thermal Engineering, 18(11), pp. 1089-1099. ISSN (print) 1359-4311

Huang, L.Y., Wen, J.X., Karayiannis, T G and Matthews, R D (1997) CFD modelling of heat transfer in condensing heat exchangers. International Journal of Heat and Technology, 15(1), pp. 23-30. ISSN (print) 0392-8764

Hunt, C.O., Rushworth, G. and Dykes, A.P. (2007) UV-fluorescence microscopy and the coherence of pollen assemblages in environmental archaeology and Quaternary geology. Journal of Archaeological Science, 34(4), pp. 562-571. ISSN (print) 0305-4403

K

Kang, Y. and Wen, J.X. (2004) Large eddy simulation of a small pool fire. Combustion Science and Technology, 176(12), pp. 2193-2223. ISSN (print) 0010-2202

Kang, Y., Wen, J.X., McGrattan, K.B. and Baum, H.R. (2001) The use of a laminar flamelet approach in the large eddy simulation of flame structure at the base of a pool fire. In: 9th International Interflam conference; 17 - 19 Sept 2001, Edinburgh, U.K..

Karwatzki, J., Zhang, T., Bao, Y., Gawne, D.T. and Liu, B. (2006) Computer model to simulate the random behaviour of particles in a thermal-spray jet. Surface and Coatings Technology, 201(6), pp. 3552-3563. ISSN (print) 0257-8972

Kew, H.Y., Cairns, R and Kenny, M.J. (2004) The use of recycled rubber tyres in concrete. In: Limbachiya, Mukesh and Roberts, John J., (eds.) Sustainable Waste Management & Recycling: Used/Post-Consumer Tyres. London, U.K. : Thomas Telford Publishing. pp. 135-142. ISBN 0727732862

Kew, H.Y., Cairns, R and Kenny, M.J. (2004) The use of recycled rubber tyres in concrete. In: 2004 International Conference Sustainable Waste Management and Recycling; 14-15 September 2004, Kingston upon Thames. ISBN 0727732862

Khoudour, L., El-Koursi, E.M., Velastin, S.A., Buch, N., Lim-Thiebot, S. and Fontaine, F. (2011) An approach for protecting transport infrastructure. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 225(4), pp. 383-393. ISSN (print) 0954-4097

King, Kenneth (2012) Geological, structural and mineralogical constraints on the evolution of the Morila gold deposit, South Mali, West Africa. (MSc(R) thesis), Kingston University.

Kinloch, A.J., Hadavinia, H., Kawashita, L., Moore, D. R. and Williams, J.G. (2006) A novel numerical method for analyzing peel tests. In: Adhesion Society: 29th Annual Meeting; 19-27 Feb 2006, Jacksonville, USA. (Proceedings of the Annual Meeting - Adhesion Society) ISSN (print) 1086-9506

Koenders, M. A (1994) Least squares methods for the mechanics of nonhomogeneous granular assemblies. Acta Mechanica, 106(1-2), pp. 23-40. ISSN (print) 0001-5970

Kohler, H.J. and Koenders, M.A. (2003) Direct visualisation of underwater phenomena in soil-fluid interaction and analysis of the effects of an ambient pressure drop on unsaturated media. Journal of Hydraulic Research, 41(1), pp. 69-78. ISSN (print) 0022-1686

Koulouris, A., Limbachiya, M.C., Fried, A.N. and Roberts, J.J. (2004) Use of recycled aggregate in concrete application: case studies. In: Sustainable Waste Management and Recycling: Challenges and Opportunities.; 14 - 15 Sept 2004, Kingston, U.K..

Kural, Aleksander, Leveque, Nicolas, Welch, Chris and Wolanski, Piotr (2004) Design of an ion thruster movable grid thrust vectoring system. Acta Astronautica, 55(3-9), pp. 421-432. ISSN (online) 0094-5765

Kusztelan, A, Yao, Y., Marchant, D.R. and Wang, Y. (2011) Increasing low speed engine response of a downsized CI engine equipped with a Twin-entry Turbocharger. In: Ricardo User Conference 2011; 2011 (5th April), Germany. (Submitted)

Kusztelan, A, Yao, Y., Marchant, D.R. and Wang, Y. (2011) A Review of Novel Turbocharger Concepts for Enhancements in Energy Efficiency. International Journal of Thermal & Environmental Engineering, 2(2), pp. 75-82.

Kusztelan, A, Hadavinia, H. and Marchant, D.R. (2010) Recent Patents in Automotive Gull-Wing Door Hinge Mechanisms. Recent Patents on Mechanical Engineering, 3(1), pp. 51-64.

Kusztelan, A, Yao, Y., Marchant, D.R. and Wang, Y. (2010) A Review of Novel Turbocharger Concepts for Enhancements in Energy Efficiency. In: International Conference on Energy, Water, and Environment; 2010 (Dec 12-15), Amman, Jordan.

L

Laicini, M., Spearman, P., Tavazzi, S. and Borghesi, A. (2005) Microscopic calculation of dielectric tensor of quaterthiophene crystals. Physical Review B, 71(4), 0-0. ISSN (online) 1098-0121

Laila, D. S. and Nesic, D. (2003) Changing supply rates for input-output to state stable discrete-time nonlinear systems with applications. Automatica, 39(5), pp. 821-835. ISSN (print) 0005-1098

Laila, D. S., Nesic, D. and Teel, A. R. (2002) Open and closed loop dissipation inequalities under sampling and controller emulation. European Journal of Control, 8(2), pp. 109-125. ISSN (print) 0947-3580

Limbachiya, M., Roberts, J.J. and Fried, A.N. (2005) Thin joint masonry in the UK. Masonry International, 18(2), pp. 85-88. ISSN (print) 0950-2289

Limbachiya, M. (1999) Adapting large area pour technology to suspended floor slabs. Concrete (London), 33(7), pp. 26-29. ISSN (print) 0010-5317

Limbachiya, M.C. (2010) Recycled aggregates: production, properties and value-added sustainable applications. Journal of Wuhan University of Technology Materials Science, 25(6), pp. 1011-1016. ISSN (print) 1000-2413

Limbachiya, M.C. and Fotiadou, S. (2010) Recycling glass waste for reuse in concrete construction. In: First International Conference on Sustainable Urbanization; 15-17 Dec 2010, Kowloon, Hong Kong. (Unpublished)

Limbachiya, M.C., Marrocchino, E. and Koulouris, A. (2007) Chemical-mineralogical characterisation of coarse recycled concrete aggregate. Waste Management, 27(2), pp. 201-208. ISSN (print) 0956-053X

Limbachiya, M.C., Dhir, R.K., McCarthy, M.J. and Chaipanich, A. (2007) Evaluation of Portland limestone cements for use in concrete construction. Materials and Structures, 40(5), pp. 459-473. ISSN (print) 1359-5997

Limbachiya, M.C. (2004) Coarse recycled aggregates for use in new concrete. Proceedings of the Institution of Civil Engineers. Engineering Sustainability, 157(2), pp. 99-106. ISSN (print) 1478-4637

Limbachiya, M.C., Koulouris, A., Roberts, J.J. and Fried, A.N. (2004) Performance of recycled aggregate concrete. In: RILEM International Symposium on Environment-Conscious Materials and Systems for Sustainable Development; 6-7 Sep 2004, Koriyama, Japan. ISBN 2912143551

Limbachiya, M.C., Leelawat, T. and Dhir, R.K. (2000) Use of recycled concrete aggregate in high-strength concrete. Materials and Structures, 33(9), 574- 580. ISSN (print) 1359-5997

Limbachiya, M.C. (1999) Current perceptions of concrete admixtures. Concrete (London), 33(10), pp. 31-33. ISSN (print) 0010-5317

Limbachiya, Mukesh and Roberts, John, eds. (2004) Sustainable waste management and recycling: construction demolition waste. London, U.K. : Thomas Telford Publishers. 405p. ISBN 0727732854

Limbachiya, Mukesh C. and Roberts, John J., eds. (2004) Sustainable waste management and recycling: glass waste. London, U.K. : Thomas Telford Publishers. 362p. ISBN 0727732846

Limbachiya, Mukesh C. and Roberts, John J., eds. (2004) Sustainable waste management and recycling: used/post-consumer tyres. London, U.K. : Thomas Telford Publishers. 336p. ISBN 0727732862

Liu, F. and Wen, J.X. (2002) The effect of turbulence modelling on the CFD simulation of buoyant diffusion flames. Fire Safety Journal, 37(2), pp. 125-150. ISSN (print) 0379-7112

M

Madhav Rao, V.C., Wen, J.X. and Tam, V.H.Y. (2009) Numerical study of hydrogen explosions in a vehicle refill environment. In: 3rd International Conference on Hydrogen Safety; 16-18 Sept 2009, Ajaccio-Corsica, France.

Magda, S.I., Ferraris, S.A., Wen, J.X., Dembele, S. and Karwatzki, J.M. (2004) Large eddy simulation of a backdraft with watermist. Journal of Applied Fire Science, 13(3), pp. 213-229. ISSN (print) 1044-4300

Maidi, M. and Lesieur, M. (2005) Large eddy simulations of spatially growing subsonic and supersonic turbulent round jets. Journal of Turbulence, 6, pp. 1-20. ISSN (online) 1468-5248

Majrouhi Sardroud, J and Limbachiya, M.C. (2011) Towards linking islands of information within construction projects utilizing combined RF technologies. In: Ao, S.I. and Gelman, L., (eds.) Electrical Engineering and Applied Computing. London, U.K. : Springer. pp. 197-207. (Lecture Notes in Electrical Engineering) ISSN (print) 1876-1100 ISBN 9789400711914

Majrouhi Sardroud, J and Limbachiya, M.C. (2010) Effective information delivery at construction phase with integrated application of RFID, GPS and GSM Technology. In: World Congress on Engineering 2010; 30 Jun - 2 Jul 2010, London, UK.

Majrouhi Sardroud, J and Limbachiya, M.C. (2010) Improving construction supply chain management with integrated application of RFID technology and portal system. In: The 8th International Conference on Logistics and SCM Research (RIRL 2010); 29 Sept - 01 Oct 2010, Bordeaux, France. (Unpublished)

Mangat, P.S. and Limbachiya, M.C. (1997) Repair material properties for effective structural application. Cement and Concrete Research, 27(4), pp. 601-617. ISSN (print) 0008-8846

Mangat, P.S. and Limbachiya, M.C. (1995) Repair material properties which influence long-term performance of concrete structures. Construction and Building Materials, 9(2), pp. 81-90. ISSN (print) 0950-0618

Manickam, B., Franke, J., Muppala, S.P.R. and Dinkelacker, F. (2009) LES of triangular-stabilized lean premixed turbulent flames with an algebraic reaction closure: quality and error assessment. In: Quality and Reliability of Large-Eddy Simulations II, QLES2009; 9 - 11 Sep 2009, Pisa, Italy.

Marir, F, Rezgui, F and Benhadj-Djilali, R (2000) A case-based expert system for construction project process activity specifications. International Journal in Construction Information Technology, 8(1), pp. 53-73. ISSN (online) 0968-0365

Marrocchino, Elena and Koulouris, Angelos (2007) Petro-chemical investigation as a tool for quality control in the production of recycled aggregates for concrete. In: European Geosciences Union General Assembly; 15 - 20 Apr 2007, Vienna, Austria.

Mashayekhi, M., Ziaei-Rad, S., Parvizian, J., Niklewicz, J. and Hadavinia, H. (2007) Ductile crack growth based on damage criterion: experimental and numerical studies. Mechanics of Materials, 39(7), pp. 623-636. ISSN (print) 0167-6636

Muppala, S., Aluri, N.K. and Dinkelacker, F. (2007) LES quality assessment methods for high reynolds number combusting flows. In: European Combustion meeting; 11 - 13 Apr 2007, Crete, Greece.

Muppala, S., Wen, J. and Aluri, N. (2007) Modelling issues of lean high- pressure turbulent premixed hydrogen- enriched hydrocarbon combustion at gas turbine conditions. In: 5th International Energy Conversion Engineering Conference and Exhibit; 25 - 27 June 2007, St. Louis, Missouri.

Muppala, S., Aluri, N.K., Dinkelacker, F and Wen, J.X. (2007) Reaction modelling of multi-component fuel lean premixed turbulent flames. In: Third European Combustion Meeting; 11 - 13 Apr 2007, Chania, Crete.

Muppala, S. P. Reddy, Sannala, S. K. R., Aluri, N. K., Dinkelacker, F., Beyrau, F. and Liepertz, A. (2007) Detailed 2-D numerical simulations of rich premixed laminar methane flames for CO concentrations and temperature. Combustion Science and Technology, 179(9), pp. 1797-1822. ISSN (print) 0010-2202

Muppala, S. P. Reddy and Dinkelacker, Friedrich (2003) Numerical calculation of turbulent premixed Methane, Ethene and Propane/Air Flames at pressures up to 10 bar. In: European Combustion meeting; 25 - 28 Oct 2003, Orleans, France.

Muppala, S.P.R., Badiger, R., Manickam, B and Wen, J.X. (2010) RANS simulation of high-pressure premixed, turbulent lean flames in PSI combustor. In: 8th Asia-Pacific Conference on Combustion; 10 - 13 Dec, 2010, Hyderabad, India.

Muppala, S.P.R., Aluri, N.K. and Dinkelacker, F. (2005) A test of validation of turbulent premixed models for high-pressure bunsen flames. In: European Combustion meeting; 3 - 6 Apr 2005, Louvain-la-Neuve, Belgium.

Muppala, S.P.R. and Dinkelacker, F (2004) Numerical modelling of the pressure dependent reaction source term for premixed turbulent methane/air flames. Progress in Computational Fluid Dynamics, an International Journal, 4(6), 328- 336. ISSN (print) 1468-4349

Muppala, S.P.Reddy, Aluri, Naresh K., Dinkelacker, Friedrich and Leipertz, Alfred (2005) Development of an algebraic reaction rate closure for the numerical calculation of turbulent premixed methane, ethylene, and propane/air flames for pressures up to 1.0 MPa. Combustion and Flame, 140(4), pp. 257-266. ISSN (online) 0010-2180

Muppala, Siva P.R. and Wen, Jennifer X. (2007) Lean premixed turbulent flames vs. hydrogen explosion: a short survey covering experimental, theoretical and analytical studies. In: UKELG 39th meeting: Experimental Studies in Gas Explosions; 30 Mar 2007, Kingston, U.K..

Muppala, Siva P.R., Papalexandris, M.V., Manickam, B., Aluri, N.K. and Dinkelacker, F. (2006) Numerical simulation of lean premixed turbulent hydrogen/hydrocarbon flames at elevated pressures. In: 10th International Workshop on Premixed Turbulent Flames; 12 - 13 Aug 2006, Mainz, Germany.

Muppala, Siva Prasad Reddy (2005) Modelling of turbulent premixed high-pressure combustion with application towards gas turbine combustors. (PhD thesis), Friedrich-Alexander-Universitat Erlangen-Nurnberg.

Murray, M.G. and Murray, P.M. (2005) WatSup model: a high resolution water supply modelling system. Journal of Hydroinformatics, 7(2), pp. 79-89. ISSN (print) 1464-7141

N

Nesic, D. and Laila, D. S. (2002) A note on input to state stabilization for nonlinear sampled-data systems. IEEE Transactions on Automatic Control, 47(7), pp. 1153-1158. ISSN (print) 0018-9286

Nixon, J.D., Dey, P.K. and Davies, P.A. (2012) The feasibility of hybrid solar-biomass power plants in India. Energy, 46(1), pp. 541-554. ISSN (print) 0360-5442

Nixon, J.D., Dey, P.K. and Davies, P.A. (2010) Which is the best solar thermal collection technology for electricity generation in north-west India? Evaluation of options using the analytical hierarchy process. Energy, 35(12), pp. 5230-5240. ISSN (print) 0360-5442

Nixon, Jonathan, Kumar Dey, Prasanta and Davies, Philip (2013) An interdisciplinary approach to designing and evaluating a hybrid solar-biomass power plant. International Journal of Energy Sector Management, 7(3), pp. 321-337. ISSN (online) 1750-6220

Nixon, Jonathan D, Dey, P.K. and Davies, P.A. (2013) Design of a novel solar thermal collector using a multi-criteria decision-making methodology. Journal of Cleaner Production, 59, pp. 150-159. ISSN (print) 0959-6526

Nixon, Jonathan D, Dey, P.K., Ghosh, S.K. and Davies, P.A. (2013) Evaluation of options for energy recovery from municipal solid waste in India using the hierarchical analytical network process. Energy, 59, pp. 215-223. ISSN (print) 0360-5442

Nixon, Jonathan D, Wright, D.G., Dey, P.K., Ghosh, S.K. and Davies, P.A. (2013) A comparative assessment of waste incinerators in the UK. Waste Management, 33(11), pp. 2234-2244. ISSN (print) 0956-053X

Nuesse, Gregor, Limbachiya, Mukesh and Ellis, Alan (2012) Managing interdisciplinary applied research on sustainability in construction with the help of an innovation broker. Steel Construction - Design and Research, 5(1), pp. 41-52. ISSN (print) 1867-0520

O

Offer, Gregory, Meah, Nafees and Coke, Alexia (2011) Enabling a transition to low carbon economies in developing countries. Case Study: Bangladesh. (Working Paper) Imperial College London.

Olde, Kate, Jarvis, Ian, Pearce, Martin, Walaszczyk, Ireneusz and Tocher, Bruce (2016) Organic-walled dinoflagellate cyst records from a prospective Turonian - Coniacian (upper Cretaceous) GSSP, Slupia Nadbrzezna, Poland. Cretaceous Research, 65, pp. 17-24. ISSN (print) 0195-6671

Omer, J. R. (2010) Implementation of approximate and finite element methods to predict negative skin friction and settlement of piles induced by ground water lowering. In: Second International Conference on Geotechnical Engineering; 25-27 October 2010, Hammamet, Tunisia.

Ordys, A., Karwatzki, J. and Curley, A. (2006) Test results for predictive control algorithms. WSEAS Transactions on Systems and Control, 1(2), pp. 121-128. ISSN (print) 1991-8763

Ordys, A.W., Grimble, M.J., Uduehi, D. and Majecki, P. (2007) Controller benchmarking procedures - model-based methods. In: Ordys, Andrzej W. , Uduehi, Damien and Johnson, Michael A., (eds.) Process Control Performance Assessment: From Theory to Implementation. London, UK : Springer. pp. 127-168. (Advances in Industrial Control) ISSN (print) 1430-9491 ISBN 1846286239

Ordys, Andrzej W. , Uduehi, Damien and Johnson, Michael A., eds. (2007) Process control performance assessment: from theory to implementation. London, UK : Springer. 325p. (Advances in Industrial Control) ISSN (online) 1430-9491 ISBN 1846286239

Ordys, Andrzej W., Tomizuka, Masayoshi and Grimble, Michael J. (2007) State-space dynamic performance preview-predictive controller. Journal Of Dynamic Systems, Measurement, And Control, 129(2), pp. 144-153. ISSN (print) 0022-0434

Osborne, B., Suvorovs, T., De Wit, J. and Steinberg, T. (2003) Microanalysis of Quenched and Self-extinguished Aluminium Rods Burned in Oxygen. In: Steinberg, Theodore A. , Newton, Barry E. and Beeson, Harold D., (eds.) Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Tenth Volume. West Conshohocken, PA, U.S. : ASTM International. pp. 151-163. (no. STP 1454) ISBN 9780803134706

Osborne, Barnaby P. and Steinberg, Theodore A. (2006) An experimental investigation into liquid jetting modes and break-up mechanisms conducted in a new reduced gravity facility. Microgravity Science and Technology, 18(3/4), pp. 57-61. ISSN (print) 0930-0108

Ouazzane, K. and Benhadj, R. (2007) An experimental investigation and design of flow-conditioning devices for orifice metering. Journal Of Mechanical Engineering Science - Part C, 221(3), pp. 281-291. ISSN (print) 0954-4062

Ozdemir, N. G., Zhang, T., Aspian, I, Scarpa, F, Hadavinia, H. and Song, Y (2016) Toughening of carbon fibre reinforced polymer composites with rubber nanoparticles for advanced industrial applications. eXPRESS Polymer Letters, 10(5), pp. 394-407. ISSN (online) 1788-618X

P

Papadopoulou, Theopisti C. (2013) Application of lean scheduling and production control in non-repetitive manufacturing systems using intelligent agent decision support. (PhD thesis), Brunel University School of Engineering and Design.

Pereira, J. M, Ghasemnejad, H., Wen, J.X and Tam, V.H.Y (2011) Blast response of cracked steel box structures repaired with carbon fibre-reinforced polymer composite patch. Materials & Design, 32(5), pp. 3092-3098. ISSN (print) 0261-3069

Pereira, J.M., Ghasemnejad, H., Wen, J., Lourenco, P. and Tam, V.H.Y. (2010) Blast resistance of cracked steel structures repaired with CFRP composite patch. In: 8th National Conference on Seismology and Earthquake Engineering; 20-23 Oct 2010, Aveiro, Portugal. (Unpublished)

Perselli, Victoria (2015) Where does theory come from...? Contexts and practices. In: ECER 2015, Budapest: Education and Transition - Contributions from Educational Research; 07-11 Sep 2015, Budapest, Hungary. (Unpublished)

R

Ransom, E.C.P. and Self, A.W. (2002) The origins of aerospace engineering degree courses. Aircraft Engineering and Aerospace Technology, 74(4), pp. 355-364. ISSN (online) 1748-8842

Rao, M., Wen, J.X. and Tam, V.H.Y. (2010) Numerical simulation of turbulent flame-wall quenching using coherent flamelet model. In: Eighth International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions; 05-10 Sep 2010, Yokohama, Japan.

Rao, V.C.M., Heidari, A, Wen, J.X. and Tam, V.H.Y. (2009) Numerical study of large scale hydrogen explosions and detonation. In: Hazards XXI - Process safety and environmental protection in a changing world; 10-12 Nov 2009, Manchester, UK. ISBN 9780852955369

Rees, S.W., Adjali, M.H., Zhou, Z., Davies, M. and Thomas, H.R. (2000) Ground heat transfer effects on the thermal performance of earth-contact structures. Renewable and Sustainable Energy Reviews, 4(3), pp. 213-265. ISSN (print) 1364-0321

Roberts, J.J., Tovey, A.K. and Fried, A.N. (2002) Design of plain masonry basement walls. The Structural Engineer, 80(11), pp. 28-36. ISSN (online) 1466-5123

S

Sabir, H.M., ElHag, Y.B.M. and Benhadj-Djilali, R. (2008) Experimental study of capillary-assisted evaporators. Energy and Buildings, 40(3), pp. 399-407. ISSN (print) 0378-7788

Sabir, H.M. and ElHag, Y.B.M. (2007) A study of capillary-assisted evaporators. Applied Thermal Engineering, 27(8-9), pp. 1555-1564. ISSN (print) 1359-4311

Sabir, H.M., Chretienneau, R. and ElHag, Y.B.M. (2004) Analytical study of a novel GAX-R heat driven refrigeration cycle. Applied Thermal Engineering, 24(14-15), pp. 2083-2099. ISSN (print) 1359-4311

Sabir, H.M. and Bwalya, A.C. (2002) Experimental study of capillary-assisted water evaporators for vapour-absorption systems. Applied Energy, 71(1), pp. 45-57. ISSN (print) 0306-2619

Sagias, Vasileios, Stergiou, Constantinos, Evangelos, Ganiaris and Benhadj-Djilali, Redha (2014) Hybrid methodology of reverse 3D beams geometry analysis with embedded quality tools within the boundaries of a modern CAD system. World Transactions on Engineering and Technology Education, 12(3), pp. 443-448. ISSN (print) 1446-2257

Samad, Shahab, Shah, Attaullah and Limbachiya, Mukesh (2017) Strength development characteristics of concrete produced with blended cement using Ground Granulated Blast furnace Slag (GGBS) under various curing conditions. Sadhana, ISSN (print) 0256-2499 (In Press)

Sandham, N.D., Yao, Y.F. and Lawal, A.A. (2003) Large-eddy simulation of transonic turbulent flow over a bump. International Journal of Heat and Fluid Flow, 24(4), pp. 584-595. ISSN (print) 0142-727X

Setoodeh, A.R., Hadavinia, H., Biglari, F.R. and Nikbin, K. (2005) Comparison of analytical, numerical and experimental methods in deriving fracture toughness properties of adhesives using bonded double lap joint specimens. Journal of Adhesion, 81(5), pp. 529-553. ISSN (print) 0021-8464

Shakouri, P., Ordys, A. and Askari, M.R. (2012) Adaptive cruise control with stop&go function using the state-dependent nonlinear model predictive control approach. ISA Transactions, 51(5), pp. 622-631. ISSN (print) 0019-0578

Shang, Zhi and Lo, Simon (2010) Numerical investigation of supercritical water-cooled nuclear reactor in horizontal rod bundles. Nuclear Engineering and Design, 240(4), pp. 776-782. ISSN (print) 0029-5493

Shawky, A.M., Ordys, A.W., Petropoulakis, L. and Grimble, M.J. (2007) Position control of flexible manipulator using non-linear H∞ with state-dependent Riccati equation. Journal Of Systems And Control Engineering - Part I, 221(3), pp. 475-486. ISSN (print) 0959-6518

Simpson, George, Fisher, Christine and Wright, David K. (2001) Modeling the interactions between a prosthetic socket, polyurethane liners and the residual limb in transtibial amputees using non-linear finite element analysis. Biomedical Sciences Instrumentation, 37, pp. 343-347. ISSN (print) 0067-8856

Sun, Z., Chew, J.W., Hills, N.J., Volkov, K.N. and Barnes, C.J. (2010) Efficient finite element analysis/computational fluid dynamics thermal coupling for engineering applications. Journal Of Turbomachinery, 132(3), 031016. ISSN (print) 0889-504X

Suvorovs, T, De Wit, JR, Osborne, BP and Steinberg, TA (2004) Investigation of burning aluminum in oxygen-enriched atmospheres through microanalysis techniques. Journal of ASTM International, 1(8), ISSN (online) 1546-962x

Suvorovs, T., DeWit, J.R., Osborne, B.P. and Steinberg, T.A. (2004) Investigation of burning iron in oxygen-enriched atmospheres through microanalysis techniques. Journal of ASTM International, 1(3), ISSN (online) 1546-962x

Sáez, Doris, Ordys, Andrzej and Grimble, Michael (2005) Design of a supervisory predictive controller and its application to thermal power plants. Optimal Control Applications and Methods, 26(4), pp. 169-198. ISSN (print) 0143-2087

T

Thomas, Mark E., Petford, Nick and Bromhead, Edward N. (2004) The effect of internal gas pressurization on volcanic edifice stability: evolution towards a critical state. Terra Nova, 16(5), pp. 312-317. ISSN (print) 0954-4879

U

Uduehi, D., Ordys, A.W., Xia, H., Bennauer, M., Zimmer, G. and Corsi, S. (2007) Controller benchmarking algorithms: some technical issues. In: Ordys, Andrzej W. , Uduehi, Damien and Johnson, Michael A., (eds.) Process Control Performance Assessment: From Theory to Implementation. London, UK : Springer. pp. 259-294. (Advances in Industrial Control) ISSN (print) 1430-9491 ISBN 1846286239

Uduehi, D., Ordys, A.W., Grimble, M.J., Majecki, P. and Xia, H. (2007) Controller benchmarking procedures - data-driven methods. In: Ordys, Andrzej W. , Uduehi, Damien and Johnson, Michael A., (eds.) Process Control Performance Assessment: From Theory to Implementation. London, UK : Springer. pp. 81-126. (Advances in Industrial Control) ISSN (print) 1430-9491 ISBN 1846286239

Uduehi, D., Xia, H., Boll, M., Nohr, M., Ordys, A.W. and Corsi, S. (2007) Divided wall distillation column simulation study. In: Ordys, Andrzej W. , Uduehi, Damien and Johnson, Michael A., (eds.) Process Control Performance Assessment: From Theory to Implementation. London, UK : Springer. pp. 169-197. (Advances in Industrial Control) ISSN (print) 1430-9491 ISBN 1846286239

Uduehi, D., Laing, D. and Ordys, A.W. (2007) Economic auditing of control systems. In: Ordys, Andrzej W. , Uduehi, Damien and Johnson, Michael A., (eds.) Process Control Performance Assessment: From Theory to Implementation. London, UK : Springer. pp. 41-80. (Advances in Industrial Control) ISSN (online) 1430-9491 ISBN 1846286239

V

Vendra, C. Madhav Rao, Wen, J.X. and Tam, V.H.Y. (2013) Numerical simulation of turbulent flame-wall quenching using a coherent flame model. Journal of Loss Prevention in the Process Industries, 26(2), pp. 363-368. ISSN (print) 0950-4230

Volkov, K. (2010) Conjugate heat transfer in a rotating disc with holes. Journal of Engineering Physics and Thermophysics, 83(2), pp. 291-302. ISSN (print) 1062-0125

Volkov, K. N. and Emelyanov, V. N. (2011) Large-eddy simulation of turbulence-induced aero-optic effects in free shear flows. Journal of Physics Conference Series, 318(4), 042062. ISSN (print) 1742-6588

Volkov, Konstantin (2011) Fluid/solid coupled heat transfer problems in gas turbine applications. In: Ciafone, Donna J., (ed.) Gas Turbines: Technology, Efficiency and Performance. Hauppauge NY, U.S.A. : Nova Science. pp. 121-183. (Engineering Tools, Techniques and Tables) ISBN 9781611228427

Volkov, Konstantin (2011) Simulation of turbulent flows in rotating disc cavity systems. In: Marcuso, R.J., (ed.) Turbulence: Theory, Types and Simulation. Hauppauge NY, U.S.A. : Nova Science. pp. 569-686. (Physics Research and Technology) ISBN 9781617617355

W

Wang, Qingsong, Chen, Haodong, Wang, Yu, Wen, Jennifer X., Dembele, Siaka, Sun, Jinhua and Le, Hingui (2014) Development of a dynamic model for crack propagation in glazing system under thermal loading. Fire Safety Journal, 63, pp. 113-124. ISSN (print) 0379-7112

Wang, X.X., Guo, Y.Y. and Shu, P.C. (2003) Numerical modelling of heat transfer between gas and solid in a vibrated fluidised bed. Applied Thermal Engineering, 23(7), pp. 821-828. ISSN (print) 1359-4311

Wang, XX, Guo, YY and Shu, PC (2004) Investigation into gas-solid heat transfer in a cryogenic vibrated fluidised bed. Powder Technology, 139(1), pp. 33-39. ISSN (print) 0032-5910

Wen, J. X., Rao, V. C. M. and Tam, V. H. Y. (2010) Numerical study of hydrogen explosions in a refuelling environment and in a model storage room. International Journal of Hydrogen Energy, 35(1), pp. 385-394. ISSN (print) 0360-3199

Wen, J.X., Xu, B.P. and Tam, V.H.Y. (2009) Numerical study on spontaneous ignition of pressurized hydrogen release through a length of tube. Combustion and Flame, 156(11), pp. 2173-2189. ISSN (print) 0010-2180

Wen, J.X., Rosario, A. F., Dembele, S, Norbert, W, Varma, K.S., Dale, S, Wood, M and Warren, P.D. (2008) Numerical study of glazing behaviour in fire conditions. In: The 3rd International Symposium, The 21st Century Center of Excellence Program, Tokyo University of Science; 10-11 Mar 2008, Tokyo, Japan.

Wen, J.X., Xu, B.P., Dembele, S., Tam, V.H.Y. and Hawksworth, S.J. (2008) Numerical study on spontaneous ignition of direct release of pressurized hydrogen into air. In: 20th NHA Annual Hydrogen Conference; 30 Mar - 2 Apr 2008, Sacramento, USA. (20th NHA Annual Hydrogen Conference 2008)

Wen, J.X., Kang, K., Donchev, T. and Karwatzki, J.M. (2007) Validation of FDS for the prediction of medium-scale pool fires. Fire Safety Journal, 42(2), pp. 127-138. ISSN (print) 0379-7112

Wen, J.X., Liu, F. and Lo, S. (2001) Performance comparison of a buoyancy-modified turbulence model with three LRN turbulence models for a square cavity. Numerical Heat Transfer Part B, 39(3), pp. 257-276. ISSN (print) 1040-7790

Wen, J.X., Huang, L.Y. and Roberts, J. (2001) The effect of microscopic and global radiative heat exchange on the field predictions of compartment fires. Fire Safety Journal, 36(3), pp. 205-223. ISSN (print) 0379-7112

Wen, J.X., Briggs, A and Rose, J W (1994) Enhancement of condensation heat transfer on integral-fin tubes using radiused fin-root fillets. Journal of Enhanced Heat Transfer, 1(2), pp. 211-217. ISSN (print) 1065-5131

Wen, Jennifer, Heidari, Ali, Ferraris, Sergio and Tam, Vincent (2011) Predicting flame acceleration using a coherent flame model. In: 22nd International Colloquium on the Dynamics of Explosions and Reactive Systems; 27-31 July 2009, Minsk, Belarus. (ICDERS 2011)

Wen, Jennifer, Dembele, Siaka, Yang, Manjiang, Tam, Vincent and Wang, Jian (2008) Numerical investigation on the effectiveness of water spray deluge in providing cooling, smoke dilution and radiation attenuation in fires. In: Ninth International Symposium on Fire Safety Science; 21 - 26 Sept 2008, Karlsruhe, Germany.

Wen, Jennifer (2003) Under-ventilated compartment fires - introduction of the EC funded Firenet Project. FABIG Newsletter(37), R498.

Wen, Jennifer (2000) CFD modelling of the confined jet fire tests in the Phase 2 project. FABIG Newsletter, 26(R369), pp. 6-11.

Williams, J.G., Hadavinia, H. and Cotterell, B. (2005) Anisotropic elastic and elastic-plastic bending solutions for edge constrained beams. International Journal of Solids and Structures, 42(18-19), pp. 4927-4946. ISSN (print) 0020-7683

Wilson, Jeff, Dallmeyer, R. David and Grocott, John (2000) New Al-40/Ar-39 dates from the Las Tazas complex, northern Chile: Tectonic significance. Journal of South American Earth Sciences, 13(1-2), pp. 115-122. ISSN (print) 0895-9811

Winter, M. G. and Bromhead, E. N. (2012) Landslide risk: some issues that determine societal acceptance. Natural Hazards, 62(2), pp. 169-187. ISSN (print) 0921-030X

X

Xia, H., Majecki, P., Ordys, A. and Grimble, M. (2006) Performance assessment of MIMO systems based on I/O delay information. Journal of Process Control, 16(4), pp. 373-383. ISSN (online) 0959-1524

Xu, B, Wen, J.X. and Tam, V.H.Y. (2011) The effect of an obstacle plate on the spontaneous ignition in pressurized hydrogen release: a numerical study. International Journal of Hydrogen Energy, 36(3), pp. 2637-2644. ISSN (print) 0360-3199

Xu, B., Chen, Z., Wen, J.X. and Dembele, S. (2010) Large eddy simulation of fire dynamics using a mixture fraction based discrete reaction model. In: International Congress "Combustion and Fire Dynamics"; 20-23 Oct 2010, Santander, Spain. (Unpublished)

Xu, B.P, Zhang, J.P., Wen, J.X., Dembele, S. and Karwatzki, J. (2005) Numerical study of a highly under-expanded hydrogen jet. In: International Conference on Hydrogen Safety; 8-10 September 2005, Pisa, Italy. (Unpublished)

Xu, B.P., Wen, J.X. and Volkov, K.N. (2013) Large-eddy simulation of vortical structures in a forced plane impinging jet. European Journal of Mechanics - BFluids, 42, pp. 104-120. ISSN (print) 0997-7546

Xu, B.P., Chen, Z.B., Wen, J.X., Zhubrin, S., Dembele, S., Wang, Y. and Dorofeev, S. (2010) Large eddy simulation of a one meter diameter methane fire using the extended discrete reaction model. In: Sixth International Seminar on Fire and Explosion Hazards; 11-16 April 2010, Leeds, UK. (Unpublished)

Xu, B.P., Wen, J.X. and Tam, V.H.Y. (2009) Numerical study on spontaneous ignition of pressurized hydrogen release through a tube. In: 3rd International Conference on Hydrogen Safety; 16-18 Sept 2009, Ajaccio-Corsica, France.

Xu, B.P., El Hima, L., Wen, J.X., Dembele, S., Tam, V.H.Y. and Donchev, T. (2008) Numerical study on the spontaneous ignition of pressurized hydrogen release through a tube into air. Journal of Loss Prevention in the Process Industries, 21(2), pp. 205-213. ISSN (print) 0950-4230

Xu, B.P., Hima, L.E., Wen, JXJ.X. and Tam, V.H.Y. (2007) Numerical study of spontaneous ignition of pressurized hydrogen release into air. In: 2nd International Conference on Hydrogen Safety; Sep 2007, San Sebastian, Spain.

Xu, B.P., El Hima, L, Wen, J.X., Dembele, S, Tam, V.H.Y. and Donchev, T (2006) Numerical study on the spontaneous ignition of pressurized hydrogen release through a tube into air. In: First European Summer School on Hydrogen Safety (ESSHS); 15-24 Aug 2006, Belfast, Northern Ireland.

Xu, Y., Wang, J., Tan, X. and Curran, R. (2008) Cost-efficient materials in aerospace: composite vs aluminium. In: 15th ISPE International Conference on Concurrent Engineering (CE2008); 18-22 Aug 2008, Belfast, Northern Ireland.

Y

Yao, Jun, Yao, Yufeng, Mason, Peter and Zhang, Tao (2008) The CFD modelling of water injection flow in turbocharger. In: The Fifth International Conference on Computational Fluid Dynamics (ICCFD5); 7-11 July 2008, Seoul, Korea. (Submitted)

Yao, Y., Krishnan, L., Sandham, N.D. and Roberts, G. (2007) The effect of Mach number on unstable disturbances in shock/boundary-layer interactions. Physics of Fluids, 19(5), ISSN (print) 1070-6631

Yao, Y.F. and Sandham, N.D. (2002) Direct numerical simulation of turbulent trailing-edge flow with base flow control. AIAA Journal, 40(9), pp. 1708-1716. ISSN (print) 0001-1452

Yao, Y.F., Thomas, T.G., Sandham, N.D. and Williams, J.J.R. (2001) Direct numerical simulation of turbulent flow over a rectangular trailing edge. Theoretical and Computational Fluid Dynamics, 14(5), pp. 337-358. ISSN (print) 0935-4964

Yap, H.Y. and Nixon, J.D. (2015) A multi-criteria analysis of options for energy recovery from municipal solid waste in India and the UK. Waste Management, ISSN (print) 0956-053X (Epub Ahead of Print)

Yong, K.C., Foot, P.J.S., Morgan, H., Cook, S. and Tinker, A.J. (2006) Conductive poly(butadiene-co-acrylonitrile)-polyaniline dodecylbenzenesulfonate [NBR-PAni.DBSA] blends prepared in solution. European Polymer Journal, 42(8), pp. 1716-1727. ISSN (print) 0014-3057

Yool, A., Lees, T.P. and Fried, A. (1998) Improvements to the methylene blue dye test for harmful clay in aggregates for concrete and mortar. Cement and Concrete Research, 28(10), pp. 1417-1428.

Z

Zhang, J., Dembele, S. and Wen, J.X. (2005) Effect of radiation models on CFD simulations of upward flame spread. Fire Safety Science, 8, pp. 421-432.

Zhang, T., Bao, Y. and Gawne, D.T. (2005) Non-steady state heating of substrate and coating during thermal-spray deposition. Surface and Coatings Technology, 194(1), pp. 82-90. ISSN (print) 0257-8972

Zhang, T., Liu, B., Bao, Y. and Gawne, D.T. (2005) Statistical analysis of the motion and heating of particles in a plasma jet. Plasma Chemistry and Plasma Processing, 25(4), pp. 403-425. ISSN (print) 0272-4324

Zhang, T., Bao, Y. and Gawne, D.T. (2003) Process model of plasma enamelling. Journal of the European Ceramic Society, 23(7), pp. 1019-1026. ISSN (print) 0955-2219

Zoras, S., Davies, M. and Adjali, M.H. (2001) A novel tool for the prediction of earth-contact heat transfer: a multi-room simulation. Proceedings of the Institution of Mechanical Engineers. Part C: Journal of mechanical engineering science, 215(4), pp. 415-422. ISSN (online) 0954-4062

This list was generated on Tue Feb 14 14:34:19 2017 GMT.