A

Abbadi, Muram, Mussa, Ifrah, Lin, Yujing and Wang, Jian (2020) Preliminary analysis of ice accretion prediction on wind turbine blades. In: AIAA Scitech 2020 Forum; 06 - 10 Jan 2020, Orlando, U.S..

Ahmadi, Hamed, Liaghat, Gholamhossein and Charandabi, Sahand Chitsaz (2020) High velocity impact on composite sandwich panels with nano-reinforced syntactic foam core. Thin-Walled Structures, 148, p. 106599. ISSN (print) 0263-8231

Al-Sharman, Mohammad K., Zweiri, Yahya, Jaradat, Mohammad Abdel Kareem, Al-Husari, Raghad, Gan, Dongming and Seneviratne, Lakmal D. (2020) Deep-learning-based neural network training for state estimation enhancement : application to attitude estimation. IEEE Transactions on Instrumentation and Measurement, 69(1), pp. 24-34. ISSN (print) 0018-9456

Aluri, Naresh K. and Muppala, Siva PR (2020) RANS and LES of turbulent premixed flame dynamics for gas turbine combustion systems. Industrial Combustion Journal, p. 201618. ISSN (online) 2075-3071

Augousti, Andy T., Radosz, Andrzej, Gusin, Pawel and Kaczmarek, Aleksander (2020) The symmetry of the interior and exterior of Schwarzschild and Reissner–Nordstrom black holes : sphere vs. cylinder. Symmetry, 12(5), e859. ISSN (online) 2073-8994

Ayyad, Abdulla, Chehadeh, Mohamad, Awad, Mohammad I. and Zweiri, Yahya (2020) Real-time system identification using deep learning for linear processes with application to unmanned aerial vehicles. IEEE Access, 8, pp. 122539-122553. ISSN (online) 2169-3536

Azzam, Rana, Taha, Tarek, Huang, Shoudong and Zweiri, Yahya (2020) Feature-based visual simultaneous localization and mapping : a survey. SN Applied Sciences, 2(2), p. 224. ISSN (print) 2523-3963

B

Baghaei Naeini, Fariborz, Makris, Dimitrios, Gan, Dongming and Zweiri, Yahya (2020) Dynamic-vision-based force measurements using convolutional recurrent neural networks. Sensors, 20(16), p. 4469. ISSN (online) 1424-8220

Bhatia, D., Li, G., Lin, Y., Sun, P., Li, H. and Wang, J. (2020) Transition delay and drag reduction using biomimetically inspired surface waves. Journal of Applied Fluid Mechanics, 13(4), pp. 1207-1222. ISSN (print) 1735-3572

Bielicki, Damian M. (2020) Legal aspects of satellite constellations. Air & Space Law, 45(3), pp. 245-263. ISSN (print) 0927-3379

Biswas, Suman, Chakraborty, Moupali and Biswas, Karabi (2020) Detection of formaldehyde by a RGO/PMMA coated sensor. In: 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC); 25-28 May 2020, Dubrovnik, Croatia.

Bulat, M.P., Bulat, P.V., Denissenko, P.V., Esakov, I.I., Grachev, L.P., Lavrov, P.V., Volkov, K.N. and Volobuev, I.A. (2020) Plasma-assisted ignition and combustion of lean and rich air/fuel mixtures in low- and high-speed flows. Acta Astronautica, 176, pp. 700-709. ISSN (print) 0094-5765

Bulat, Pavel Viktorovich and Volkov, Konstantin Nikolaevich (2020) Simulation of incompressible flows in channels containing fluid and porous regions. International Journal of Industrial and Systems Engineering, 34(3), pp. 283-300. ISSN (print) 1748-5037

C

Chakraborty, Moupali and Biswas, Karabi (2020) Milk tester : simultaneous detection of fat content and adulteration. IEEE Transactions on Instrumentation and Measurement, 69(5), pp. 2468-2476. ISSN (print) 0018-9456

D

De Jager, Deon (2020) Real-time optimization of working memory in autonomous reasoning for high-level control of cognitive robots deployed in dynamic environments. (PhD thesis), Kingston University, .

Dombrovsky, Leonid A., Levashov, Vladimir Yu., Kryukov, Alexei P., Dembele, Siaka and Wen, Jennifer X. (2020) A comparative analysis of shielding of thermal radiation of fires using mist curtains containing droplets of pure water or sea water. International Journal of Thermal Sciences, 152, p. 106299. ISSN (print) 1290-0729

Domun, Nadiim, Paton, Keith R., Blackman, Bamber R. K., Kaboglu, Cihan, Vahid, Samireh, Zhang, Tao, Dear, John P., Kinloch, Anthony J. and Hadavinia, Homayoun (2020) On the extent of fracture toughness transfer from 1D/2D nanomodified epoxy matrices to glass fibre composites. Journal of Materials Science, 55(11), pp. 4717-4733. ISSN (print) 0022-2461

Duan, Ningmin, Shi, Zhenyu, Wang, Jilai, Wang, Guilong and Zhang, Xianzhi (2020) Strong and flexible carbon fiber fabric reinforced thermoplastic polyurethane composites for high‐performance EMI shielding applications. Macromolecular Materials and Engineering, 305(6), p. 1900829. ISSN (print) 1438-7492

E

Elsayed, Eman, AL-Dadah, Raya, Mahmoud, Saad, Anderson, Paul and Elsayed, Ahmed (2020) Experimental testing of aluminium fumarate MOF for adsorption desalination. Desalination, 475, p. 114170. ISSN (print) 0011-9164

Emelyanov, V.N., Teterina, I.V. and Volkov, K.N. (2020) Dynamics and combustion of single aluminium agglomerate in solid propellant environment. Acta Astronautica, 176, pp. 682-694. ISSN (print) 0094-5765

Eshraghi, Kourosh, Jiang, Pingfei, Suraci, Daniele and Atherton, Mark (2020) Preliminary study on end-effector compliance in automated fluid coupling for trains. In: The Thirteenth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2020) : Designing and Engineering of Smart Systems; .

F

Farzaneh, R, Dansoh, C, Augousti, A and Wang, J (2020) A review of UAE native seaweed as potential bio-refinery feedstock for jet fuel and high value chemicals. Advance in Environmental Waste Management & Recycling, 3(1), pp. 10-15. ISSN (online) 2641-1784

Fountas, N. A., Vaxevanidis, N. M., Stergiou, C. I. and Benhadj-Djilali, R. (2020) A multi-objective tool path optimization methodology for sculptured surfaces based on experimental data and heuristic search. In: Kumar, Kaushik , Zindani, Divya and Davim, J. Paulo, (eds.) Digital manufacturing and assembly systems in industry 4.0. Boca Raton, U.S. : CRC Press. pp. 101-140. (Science, Technology, and Management) ISBN 9781138612723

G

Gaz, Claudio, Cristofaro, Andrea and De Luca, Alessandro (2020) Detection and isolation of actuator faults and collisions for a flexible robot arm. In: 59th IEEE Conference on Decision and Control (CDC); 14 - 18 Dec 2020, Jeju Island, South Korea (Held online).

H

Hassanin, Hany, Alkendi, Yusra, Elsayed, Mahmoud, Essa, Khamis and Zweiri, Yahya (2020) Controlling the properties of additively manufactured cellular structures using machine learning approaches. Advanced Engineering Materials, 22(3), p. 1901338. ISSN (print) 1438-1656

Hassanpour Roudbeneh, Fatemeh, Liaghat, Gholamhossein, Sabouri, Hadi and Hadavinia, Homayoun (2020) High-velocity impact loading in honeycomb sandwich panels reinforced with polymer foam : a numerical approach study. Iranian Polymer Journal, 29(8), pp. 707-721. ISSN (print) 1026-1265

Huang, Xiaoqian, Muthusamy, Rajkumar, Hassan, Eman, Niu, Zhenwei, Seneviratne, Lakmal, Gan, Dongming and Zweiri, Yahya (2020) Neuromorphic vision based contact-level classification in robotic grasping applications. Sensors, 20(17), p. 4724. ISSN (online) 1424-8220

J

Jenabi, J., Khazaeinejad, P. and Nezamabadi, A. (2020) Size-dependent nonlinear analysis of composite laminated micro skew plates reinforced with functionally graded graphene sheets. In: UK Association for Computational Mechanics (UKACM) Conference 2020; 2020, Loughborough, U.K..

K

Kabiri, Ali, Liaghat, Gholamhossein, Alavi, Fatemeh, Saidpour, Hossein, Hedayati, Seyyed Kaveh, Ansari, Mehdi and Chizari, Mahmoud (2020) Glass fiber/polypropylene composites with potential of bone fracture fixation plates : manufacturing process and mechanical characterization. Journal of Composite Materials, 54(30), pp. 4903-4919. ISSN (print) 0021-9983

Khodadadi, Amin, Liaghat, Gholamhossein, Shahgholian-Ghahfarokhi, Davoud, Chizari, Mahmoud and Wang, Bin (2020) Numerical and experimental investigation of impact on bilayer aluminum-rubber composite plate. Thin-Walled Structures, 149, p. 106673. ISSN (print) 0263-8231

Khodadadi Azadboni, Reza, Heidari, Ali and Wen, Jennifer X. (2020) Numerical studies of flame acceleration and onset of detonation in homogenous and inhomogeneous mixture. Journal of Loss Prevention in the Process Industries, 64, p. 104063. ISSN (print) 0950-4230

Knight, Jason, Fels, Simon, Haritos, George and Carolus, Thomas (2020) Fluid-structure interaction of a spring-mounted symmetrical rigid wing for drag reduction of cars at higher wind velocities. (Technical Report) SAE. (Automotive Technical Papers)

L

Li, Guangning, Bhatia, Dinesh and Wang, Jian (2020) Compressive properties of min-mod-type limiters in modelling shockwave-containing flows. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, p. 290. ISSN (print) 1678-5878

Li, Xin, Shi, Zhenyu, Duan, Ningmin, Cui, Peng, Zhang, Shuai and Zhang, Xianzhi (2020) Cutting performance investigation based on the variable friction model by considering sliding velocity and limiting stress. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 234(8), pp. 1113-1123. ISSN (print) 2041-2975

M

Markert, Bernd, Abdallah, Naglaa, Aksoy, Ahmed, Ammari, Tarek, Arias, Andres, Azaizeh, Hassan, Badran, Adnan, Baltrėnaitė, Edita, Baydoun, Elias, Bernstein, Nirit, Canha, Nuno, Chudzinska, Ewa, Delakowitz, Bernd, Diatta, Jean, Djingova, Rumy, El-Sheik, Omer, Fargasova, Agata, Maria Figueiredo, Ana, Fränzle, Stefan, Frontesyeva, Marina, Ghafari, Zahra, Golan, Avi, Gorelova, Svetlana, Greger, Maria, Harmens, Harry, Hillman, John, Hooda, Peter, Jayasekera, Ranjit, Kidd, Petra, Kim, Eun-Shik, Loppi, Stefano, Lahiri, Susanta, Liu, Shirong, Lux, Alexander, Ma, Lena, Marcovecchio, Jorge, Meers, Erik, Mench, Michel, Michalke, Bernhard, Mowafaq, Mohammed, Namiesnik, Jacek, Nriagu, Jerome, Öztürk, Munir, Pacyna, Jozef, Pehkonen, Simo, Renella, Giancarlo, Rinklebe, Jörg, Robinson, Bret, Saiki, Mitiko, Szefer, Piotr, Tabors, Guntis, Tack, Filipe, Suchara, Ivan, Vangronsveld, Jaco, Vasconcellos, Marina, Wang, Meie, Waclawek, Maria, Wolterbeek, Bert, Wünschmann, Simone and Zechmeister, Harald (2020) Information gain in environmental monitoring through bioindi-cation and biomonitoring methods ("B & B technologies") and phytoremediation processes : with special reference to the Biological System of Chemical Elements (BSCE) under specific consideration of Lithium. Bioactive Compounds in Health and Disease, 3(11), pp. 214-250. ISSN (online) 2574-0334

Mohammed, Abdullah, Elshaer, Amr, Sareh, Pooya, Elsayed, Mahmoud and Hassanin, Hany (2020) Additive manufacturing technologies for drug delivery applications. International Journal of Pharmaceutics, 580, p. 119245. ISSN (print) 0378-5173

Mohd Nasir, Siti Diana, Xu, Weijie, Vital, Becky, Pantua, Conrad, Zhou, Bochao, Calautit, John and Hughes, Ben (2020) Urban road and pavement solar collector system for heat island mitigation : assessing the beneficial impact on outdoor temperature. IOP Conference Series : Earth and Environmental Science, 463, 012038. ISSN (print) 1755-1307

Mohiuddin, Abdullah, Zweiri, Yahya, Almadhoun, Randa, Taha, Tarek and Gan, Dongming (2020) Energy distribution in dual-UAV collaborative transportation through load sharing. Journal of Mechanisms and Robotics, JMR-19. ISSN (print) 1942-4302 (Epub Ahead of Print)

Mohiuddin, Abdullah, Tarek, Taha, Zweiri, Yahya and Gan, Dongming (2020) A survey of single and multi-UAV aerial manipulation. Unmanned Systems, 8(2), pp. 119-147. ISSN (print) 2301-3850

Muppala, Siva PR and Vasudevan, Sooraj PM (2020) Numerical evaluation of lean premixed turbulent flame characteristics on co-axial cylinder configuration at gas turbine conditions. Industrial Combustion Journal, p. 201620. ISSN (online) 2075-3071

Muthusamy, Rajkumar, Huang, Xiaoqian, Zweiri, Yahya, Seneviratne, Lakmal and Gan, Dongming (2020) Neuromorphic event-based slip detection and suppression in robotic grasping and manipulation. IEEE Access, 8, pp. 153364-153384. ISSN (online) 2169-3536

N

Nazar Pour, Farhad (2020) Development of a numerical model for simulation of liquefied natural gas (LNG) pool spread and dispersion. (PhD thesis), Kingston University, .

Ning, Fangwei, Shi, Yan, Cai, Maolin, Xu, Weiqing and Zhang, Xianzhi (2020) Manufacturing cost estimation based on a deep-learning method. Journal of Manufacturing Systems, 54, pp. 186-195. ISSN (print) 0278-6125

Ning, Fangwei, Shi, Yan, Cai, Maolin, Xu, Weiqing and Zhang, Xianzhi (2020) Manufacturing cost estimation based on the machining process and deep-learning method. Journal of Manufacturing Systems, 56, pp. 11-22. ISSN (print) 0278-6125

R

Roudbeneh, Fatemeh Hassanpour, Liaghat, Gholamhossein, Sabouri, Hadi and Hadavinia, Homayoun (2020) Experimental investigation of quasistatic penetration tests on honeycomb sandwich panels filled with polymer foam. Mechanics of Advanced Materials and Structures, 27(21), pp. 1803-1815. ISSN (print) 1537-6494

S

Saleh, Zainab, Avital, Eldad J. and Korakianitis, Theodosios (2020) Effect of in-service burnout on the transonic tip leakage flows over flat tip model. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 234(5), pp. 655-669. ISSN (print) 0957-6509

Shahgholian-Ghahfarokhi, Davoud, Rahimi, Gholamhossein, Liaghat, Gholamhossein, Degenhardt, Richard and Franzoni, Felipe (2020) Buckling prediction of composite lattice sandwich cylinders (CLSC) through the vibration correlation technique (VCT) : numerical assessment with experimental and analytical verification. Composites Part B: Engineering, 199, p. 108252. ISSN (print) 1359-8368

Sharif Moghadam, Sharon, Lin, Yujing and Wang, Jian (2020) Computational investigation on airframe noise generation around high-lift devices. In: AIAA AVIATION 2020 Forum; 15 - 19 Jun 2020, Online.

Struchkov, A.V., Kozelkov, A.S., Volkov, K.N., Kurkin, A.A., Zhuckov, R.N. and Sarazov, A.V. (2020) Numerical simulation of aerodynamic problems based on adaptive mesh refinement method. Acta Astronautica, 172, pp. 7-15. ISSN (print) 0094-5765

T

Taherzadeh-Fard, Alireza, Liaghat, Gholamhossein, Ahmadi, Hamed, Razmkhah, Omid, Chitsaz Charandabi, Sahand, Amin Zarezadeh-mehrizi, Mohammad and Khodadadi, Amin (2020) Experimental and numerical investigation of the impact response of elastomer layered fiber metal laminates (EFMLs). Composite Structures, 245, p. 112264. ISSN (print) 0263-8223

U

Uddin, Md. Jashim, Hooda, Peter S., Mohiuddin, Abdus Salam Mohammad and Smith, Mike (2020) Geospatial technologies in precision farming : a case study. In: 16th International Conference on Intelligent Environments (IE2020); 20 - 23 Jul 2020, Madrid, Spain (Held online).

Z

Zahedan, Nima, Ahmadi, Hamed and Liaghat, Gholamhossein (2020) Energy absorption study of a new reinforced top-hat section beam under flexural loading. International Journal of Crashworthiness, ISSN (print) 1358-8265