2019

Sarjito, Yogananda, Risky, Qomarun, Yao, Yufeng and Marchant, Denis (2019) Numerical simulation and experimental studies on residential home using evaporative cooling and vertical ventilation. International Journal of Mechanical Engineering and Technology, 10(3), pp. 89-101. ISSN (print) 0976-6340

Ahmed, Asmau M., Duran, Olga, Zweiri, Yahya and Smith, Mike (2019) Quantification of hydrocarbon abundance in soils using deep learning with dropout and hyperspectral data. Remote Sensing, 11(16), p. 1938. ISSN (online) 2072-4292

Akhundzada, Hikmatullah, Donchev, Ted and Petkova, Diana (2019) Strengthening of slab-column connection against punching shear failure with CFRP laminates. Composite Structures, 208, pp. 656-664. ISSN (print) 0263-8223

Al-Ali, Ismail, Zweiri, Yahya, Al Moosa, Nawaf, Taha, Tarek, Dias, Jorge and Senevirtane, Lakmal (2019) State of the art in tilt-quadrotors, modelling, control, and fault recovery. Journal of Mechanical Engineering Science - Part C, 234(2), pp. 474-486. ISSN (print) 0954-4062

Almadhoun, Randa, Abduldayem, Abdullah, Taha, Tarek, Seneviratne, Lakmal and Zweiri, Yahya (2019) Guided Next Best View for 3D reconstruction of large complex structures. Remote Sensing, 11(20), p. 2440. ISSN (online) 2072-4292

Almadhoun, Randa, Taha, Tarek, Seneviratne, Lakmal and Zweiri, Yahya (2019) A survey on multi-robot coverage path planning for model reconstruction and mapping. SN Applied Sciences, 1(847), ISSN (print) 2523-3963

Alzahrani, Abdullah, Zhou, Dewen, Kuchel, Rhiannon P., Zetterlund, Per B. and Aldabbagh, Fawaz (2019) Polymerization-induced self-assembly based on ATRP in supercritical carbon dioxide. Polymer Chemistry, 10(21), pp. 2658-2665. ISSN (print) 1759-9954

Azzouz, Lyes, Chen, Yong, Zarrelli, Mauro, Pearce, Joshua M., Mitchell, Leslie, Ren, Guogang and Grasso, Marzio (2019) Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins. Composite Structures, 213, pp. 220-230. ISSN (print) 0263-8223

Bayat, Amar, Liaghat, Gholam Hossein, Ghalami-Choobar, Mehran, Ashkezari, Ghasem Dehghani and Sabouri, Hadi (2019) Analytical modeling of the high-velocity impact of autoclaved aerated concrete (AAC) blocks and some experimental results. International Journal of Mechanical Sciences, 159, pp. 315-324. ISSN (print) 0020-7403

Bayat, Amar, Liaghat, Gholamhossein, Sabouri, Hadi, Ashkezari, Ghasem Dehghani, Pedram, Ehsan, Taghizadeh, Sayed Ahmad, Khan, Muhammad Kashif and Razmkhah, Omid (2019) Experimental investigation on the quasi-static mechanical behavior of autoclaved aerated concrete insulated sandwich panels. Journal of Sandwich Structures & Materials, ISSN (print) 1099-6362 (Epub Ahead of Print)

Besseris, George J. (2019) Synchronous screening-and-optimization of nano-engineered blood pressure-drop using rapid robust non-linear Taguchi profiling. Chemical Engineering Science, 203, pp. 186-200. ISSN (print) 0009-2509

Besseris, Georgios J. (2019) Evaluation of robust scale estimators for modified Weibull process capability indices and their bootstrap confidence intervals. Computers & Industrial Engineering, 128, pp. 135-149. ISSN (print) 0360-8352

Betancor Bosch, Javier, Sahinkaya, M. Necip and Zweiri, Yahya H. (2019) Radial active magnetic bearing design optimization. In: Lucchesi Cavalca, Katia and Weber, Hans Ingo, (eds.) Proceedings of the 10th International Conference on Rotor Dynamics – IFToMM. Cham, Switzerland : Springer. pp. 321-334. (Mechanisms and Machine Science, 1(60)) ISSN (print) 2211-0984 ISBN 9783319992617

Bhatia, D and Wang, J (2019) Biomimetics : a potential solution to drag reduction in modern aerodynamics. Global Journal of Engineering Sciences, 3(4), ISSN (online) 2641-2039

Bond, Henry (2019) Flight accidents in the 21st Century U.S. Air Force : the facts of 40 non-combat events. Jefferson, U.S. : McFarland. 193p. ISBN 9781476674025

Brykov, N. A., Volkov, K. N., Emel'yanov, V. N. and Teterina, I. V. (2019) Flow in the nozzle of an alternating-current plasma generator with a nonstationary local energy supply. Journal of Engineering Physics and Thermophysics, 92(3), pp. 640-650. ISSN (print) 1062-0125

Bulat, M.P., Bulat, P.V., Denissenko, P.V., Esakov, I.I., Grachev, L.P., Volkov, K.N. and Volobuev, I.A. (2019) Ignition and combustion of air/fuel mixture in a long tube induced by microwave subcritical streamer discharge. Acta Astronautica, 163(Part A), pp. 33-43. ISSN (print) 0094-5765

Bulat, Mikhail, Bulat, Pavel, Denissenko, Petr, Esakov, Igor, Grachev, Lev, Volkov, Konstantin and Volobuev, Igor (2019) Experimental study of microwave streamer discharge ignition of premixed air/fuel mixtures. IEEE Transactions on Plasma Science, 47(1), pp. 57-61. ISSN (print) 0093-3813

Bulat, Mikhail, Bulat, Pavel, Denissenko, Petr, Esakov, Igor, Grachev, Lev, Volkov, Konstantin and Volobuev, Igor (2019) Numerical simulation of ignition of premixed air/fuel mixtures by microwave streamer discharge. IEEE Transactions on Plasma Science, 47(1), pp. 62-68. ISSN (print) 0093-3813

Cacciabue, Pietro Carlo [Reviewer] (2019) Book Review of: 'Cognitive engineering and safety organization in air traffic management'. Cognition, Technology & Work, 21(1), pp. 159-160. ISSN (print) 1435-5558

Dashtkar, Arash, Hadavinia, Homayoun, Sahinkaya, M Necip, Williams, Neil, Vahid, Samireh, Ismail, Fanya and Turner, Matthew (2019) Rain erosion-resistant coatings for wind turbine blades : a review. Polymers and Polymer Composites, 27(8), pp. 443-475. ISSN (print) 0967-3911

Davis, Mastaneh, Hunter, Gordon, Thalaal, Lynn, Tran Ba, Vivien and Wooding-Olajorin, Alice (2019) Developing "smart" tutorial tools to assist students learn calculus, taking account of their changing preferred approaches to learning. In: 15th International Conference on Intelligent Environments Ambient Intelligence and Smart Environments; 24 - 27 Jun 2019, Rabat, Morocco.

De Gaetano, Andrea, Gaz, Claudio and Panunzi, Simona (2019) Consistency of compact and extended models of glucose-insulin homeostasis : the role of variable pancreatic reserve. PLoS ONE, 14(2), e0211331. ISSN (online) 1932-6203

Denissenko, Petr, Bulat, Mikhail P., Esakov, Igor I., Grachev, Lev P., Volkov, Konstantin N., Volobuev, Igor A., Upyrev, Vladimir and Bulat, Pavel V. (2019) Ignition of premixed air/fuel mixtures by microwave steamer discharge. Combustion and Flame, 202, pp. 417-422. ISSN (print) 0010-2180

Domun, Nadiim, Kaboglu, Cihan, Paton, Keith R., Dear, John P., Liu, Jun, Blackman, Bamber R.K., Liaghat, Gholamhossein and Hadavinia, Homayoun (2019) Ballistic impact behaviour of glass fibre reinforced polymer composite with 1D/2D nanomodified epoxy matrices. Composites Part B: Engineering, 167, pp. 497-506. ISSN (print) 1359-8368

Duc, Nguyen Dinh, Hadavinia, Homayoun, Quan, Tran Quoc and Khoa, Nguyen Dinh (2019) Free vibration and nonlinear dynamic response of imperfect nanocomposite FG-CNTRC double curved shallow shells in thermal environment. European Journal of Mechanics - A/Solids, 75, pp. 355-366. ISSN (print) 0997-7538

Effendy, M., Yao, Y.F., Yao, J. and Marchant, D.R. (2019) Detached eddy simulation of blade trailing-edge cutback cooling performance at various ejection slot angles. International Journal of Heat and Fluid Flow, 80, p. 108487. ISSN (print) 0142-727X

Elsayed, Eman, AL-Dadah, Raya, Mahmoud, Saad, Anderson, Paul and Elsayed, Ahmed (2019) Adsorption cooling system employing novel MIL-101(Cr)/CaCl[sub]2 composites : numerical study. International Journal of Refrigeration, 107, pp. 246-261. ISSN (print) 0140-7007

Elsayed, Eman, Anderson, Paul, AL-Dadah, Raya, Mahmoud, Saad and Elsayed, Ahmed (2019) MIL-101(Cr)/calcium chloride composites for enhanced adsorption cooling and water desalination. Journal of Solid State Chemistry, 277, pp. 123-132. ISSN (print) 0022-4596

Emelyanov, V., Karpenko, A. and Volkov, K. (2019) Simulation of hypersonic flows with equilibrium chemical reactions on graphics processor units. Acta Astronautica, 163(Part A), pp. 259-271. ISSN (print) 0094-5765

Emelyanov, V.N., Pustovalov, A.V. and Volkov, K.N. (2019) Supersonic jet and nozzle flows in uniform-flow and free-vortex aerodynamic windows of gas lasers. Acta Astronautica, 163(Part A), pp. 232-243. ISSN (print) 0094-5765

Emelyanov, Vladislav, Tsvetkov, Aleksey and Volkov, Konstantin (2019) Mechanism of generation and sources of noise in supersonic jets. Journal Akustika, 32, ISSN (print) 1801-9064

Fountas, Nikolaos A., Vaxevanidis, Nikolaos M., Stergiou, Constantinos I. and Benhadj-Djilali, Redha (2019) Globally optimal tool paths for sculptured surfaces with emphasis to machining error and cutting posture smoothness. International Journal of Production Research, 57(17), pp. 5478-5498. ISSN (print) 0020-7543

Fountas, Nikolaos A. (2019) A virus-evolutionary, multi-objective intelligent tool path optimisation methodology for sculptured surface CNC machining. (PhD thesis), Kingston University, .

Gaz, Claudio, Cognetti, Marco, Oliva, Alexander, Giordano, Paulo Robuffo and de Luca, Alessandro (2019) Dynamic identification of the Franka Emika Panda robot with retrieval of feasible parameters using penalty-based optimization. IEEE Robotics and Automation Letters, 4(4), pp. 4147-4154. ISSN (online) 2377-3766

Grasso, Marzio, Xu, Yigeng, Ramji, Amit, Zhou, Gang, Chrysanthou, Andreas, Haritos, George and Chen, Yong (2019) Low-velocity impact behaviour of woven laminate plates with fire retardant resin. Composites Part B: Engineering, 171, pp. 1-8. ISSN (print) 1359-8368

Hubert, Antoine, Dembele, Siaka, Denissenko, Petr and Wen, Jennifer (2019) Predicting Liquefied Natural Gas (LNG) rollovers using Computational Fluid Dynamics. Journal of Loss Prevention in the Process Industries, 62, p. 103922. ISSN (print) 0950-4230

Hunter, Gordon, Howard, Donald, Gauvreau, Sylvain, Duran, Olga and Busquets, Rosa (2019) Processing of multi-modal environmental signals recorded from a "smart" beehive. Proceedings of the Institute of Acoustics, 41(1), pp. 339-348. ISSN (print) 1478-6095

Hunter, Gordon, Davis, Mastaneh, Wooding-Olajorin, Alice and Thalaal, Lynn (2019) An investigation into specialist and engineering students’ preparedness for and approaches to learning mathematics. In: CETL-MSOR 2019 : Bringing Together Mathematics Communities; 5 - 6 September 2019, Dublin City University, Dublin, Ireland. (Unpublished)

Jiang, P and Atherton, M (2019) Additive manufacture of passive acoustic filters : a feasibility study. In: 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM 2019); 04 - 05 Apr 2019, London, U.K.. (Unpublished)

Jones, Mark and Hunter, Gordon (2019) Conservation laws for a non-linear system describing the propagation of "triadic" waves. Proceedings of the Institute of Acoustics, 41(1), pp. 137-145. ISSN (print) 1478-6095

Juthapakdeeprasert, Jindaporn, Lerdprom, Wirat, De Sousa Meneses, Domingos, Jayaseelan, Doni D. and Lee, William E (2019) High emissivity coatings for basic refractory bricks. In: Unified International Technical Conference of Refractories; 13-16 Oct 2019, Yokohama, Japan. (Unpublished)

Kalpaxidis, Panteleimon G., Besseris, George J. and Stergiou, Constantinos I. (2019) Six Sigma tolerance analysis for functionality and assemblability : designing locking systems. International Journal of Six Sigma and Competitive Advantage, 11(4), pp. 277-302. ISSN (print) 1479-2494

Kennedy, Donald and Philbin, Simon (2019) Techno-economic analysis of the adoption of electric vehicles. Frontiers of Engineering Management, 6(4), pp. 538-550. ISSN (print) 2095-7513

Khodadadi, A., Liaghat, Gh, Vahid, S., Sabet, A.R. and Hadavinia, H. (2019) Ballistic performance of Kevlar fabric impregnated with nanosilica/PEG shear thickening fluid. Composites Part B: Engineering, 162, pp. 643-652. ISSN (print) 1359-8368

Khodadadi, Amin, Liaghat, Gholamhossein, Reza Bahramian, Ahmad, Ahmadi, Hamed, Anani, Yavar, Asemani, Samaneh and Razmkhah, Omid (2019) High velocity impact behavior of Kevlar/rubber and Kevlar/epoxy composites : a comparative study. Composite Structures, 216, pp. 159-167. ISSN (print) 0263-8223

Khodadadi, Amin, Liaghat, Gholamhossein, Ahmadi, Hamed, Bahramian, Ahmad Reza and Razmkhah, Omid (2019) Impact response of Kevlar/rubber composite. Composites Science and Technology, 184, p. 107880. ISSN (print) 0266-3538

Khodadadi, Amin, Liaghat, Gholamhossein, Ahmadi, Hamed, Bahramian, Ahmad Reza, Anani, Yavar, Razmkhah, Omid and Asemeni, Samaneh (2019) Numerical and experimental study of impact on hyperelastic rubber panels. Iranian Polymer Journal, 28(2), pp. 113-122. ISSN (print) 1026-1265

Khodadadi Azadboni, Reza (2019) Numerical modelling of inhomogeneous Liquefied Natural Gas (LNG) vapour cloud explosions. (PhD thesis), Kingston University, .

Khodadadi Azadboni, Reza, Heidari, Ali, Boeck, Lorenz R. and Wen, Jennifer X. (2019) The effect of concentration gradients on deflagration-to-detonation transition in a rectangular channel with and without obstructions : a numerical study. International Journal of Hydrogen Energy, 44(13), pp. 7032-7040. ISSN (online) 0360-3199

Konoiko, Aleksey, Kadhem, Allan, Saiful, Islam, Ghorbanian, Navid, Zweiri, Yahya and Sahinkaya, M. Necip (2019) Deep learning framework for controlling an active suspension system. Journal of Vibration and Control, 25(17), pp. 2316-2329. ISSN (print) 1077-5463

Lyras, Konstantinos G., Dembele, Siaka and Wen, Jennifer X. (2019) Numerical simulation of flashing jets atomisation using a unified approach. International Journal of Multiphase Flow, 113, pp. 45-58. ISSN (print) 0301-9322

Mellor, Robert, ed. (2019) Management for scientists. Bingley, U.K. : Emerald Publishing Limited. 232p. ISBN 9781787692046

Mohiuddin, Abdullah, Taha, Tarek, Zweiri, Yahya and Gan, Dongming (2019) UAV payload transportation via RTDP based optimized velocity profiles. Energies, 12(16), p. 3049. ISSN (online) 1996-1073

Muppala, Siva, Vendra, C. Madhav Rao and Aluri, Naresh K. (2019) Modelling and numerical simulation of dual fuel lean flames using local burning velocity and critical chemical timescale. SAE International Journal of Engines, 12(4), pp. 373-385. ISSN (print) 1946-2936

Nanayakkara, Visakha K., Sornkaran, Nantachai, Wegiriya, Hasitha, Vitzilaios, Nikolaos, Venetsanos, Demetrios, Rojas, Nicolas, Sahinkaya, M. Necip and Nanayakkara, Thrishantha (2019) A method to estimate the oblique arch folding axis for thumb assistive devices. In: 20th Annual Conference on Towards Autonomous Robotic Systems (TAROS) 2019; 03-05 Jul 2019, London, U.K..

Okam, Enyinna and Lung, Andy (2019) The prospect of industry 4.0 as a contributor towards economic diversification and growth in African nations. International Journal of Applied Engineering Research, 14(5), pp. 1106-1114. ISSN (print) 0973-4562

Philbin, Simon (2019) Enterprise education for engineers with the Technology Evaluation and Commercialisation Framework. In: International Entrepreneurship Educators Conference 2019; 04-06 Sep 2019, Oxford, U.K.. (Unpublished)

Philbin, Simon P. and Wang, Steve Hsueh-Ming (2019) Perspectives on the techno-economic analysis of carbon capture and storage. Journal of Technology Management & Innovation, 14(3), ISSN (online) 0718-2724

Pocklington, Istvan and Kew, Hsein (2019) Effects on strength of concrete from incremental rubber aggregate replacement by volume. In: Fifth International Conference on Sustainable Construction Materials and Technologies (SCMT5); 14-17 Jul 2019, Kingston Upon Thames, U.K..

Riyadia, Tri Widodo Besar, Zhang, Tao, Marchant, Denis and Zhu, Xiaomeng (2019) NiAl–TiC–Al[sub]2O[sub]3 composite formed by self-propagation high-temperature synthesis process : combustion behaviour, microstructure, and properties. Journal of Alloys and Compounds, 805, pp. 104-112. ISSN (print) 0925-8388

Santana Artiles, María Ester (2019) Numerical investigation of femoral augmentation. (PhD thesis), Kingston University, .

Sarjito, Marchant, Denis, Yao, Yufeng and Binyamin (2019) The impact of multi-nozzles array on entrainment mass flow rate and homogeneity of the speed and profiles of heat. International Journal of Engineering & Technology, 8(1.1), pp. 66-70. ISSN (online) 2227-524X

Sikic, Ivan, Dembele, Siaka and Wen, Jennifer (2019) Non-grey radiative heat transfer modelling in LES-CFD simulated methanol pool fires. Journal of Quantitative Spectroscopy and Radiative Transfer, 234, pp. 78-89. ISSN (print) 0022-4073

Sorce, Salvatore, Malizia, Alessio, Gentile, Vito, Jiang, Pingfei, Atherton, Mark and Harrison, David (2019) Evaluation of a visual tool for early patent infringement detection during design. In: 7th International Symposium on End-User Development (IS-EUD 2019); 10-12 Jul 2019, Hatfield, U.K.. ISSN (print) 0302-9743

Tsainis, Andreas Marios, Papazafeiropoulos, George and Stergiou, Constantinos (2019) A novel convex hull method for optimum multi-point 5-axis tool positioning for machining of complex sculptured surfaces. The International Journal of Advanced Manufacturing Technology, 103(9-12), pp. 4369-4383. ISSN (print) 0268-3768

Turchi, Peter J., Mikellides, Pavlos G., Shaw, Peter V. and Woodruff, Simon (2019) Design of an experiment for compression and nozzle expansion of a field-reversed configuration for advanced space propulsion. In: 36th International Electric Propulsion Conference University of Vienna, Austria; 15 - 20 Sep 2019, Vienna, Austria. (Unpublished)

Wanninayake, Indika B (2019) Miniaturised optical fibre based palpations instrument for minimally invasive surgery. Journal of Physics: Conference Series, 1151, 012014. ISSN (print) 1742-6588

Yao, Leijiang, Lyu, Peng, Bai, Guodong and Augousti, Andy T. (2019) Influence of low velocity impact on oxidation performance of SiC coated C/SiC composites. Ceramics International, 45(16), pp. 20470-20477. ISSN (print) 0272-8842

Zaiemyekeh, Z., Liaghat, G.H., Ahmadi, H., Khan, M.K. and Razmkhah, O. (2019) Effect of strain rate on deformation behavior of aluminum matrix composites with Al[sub]2O[sub]3 nanoparticles. Materials Science and Engineering A, 753, pp. 276-284. ISSN (print) 0921-5093

Zhang, Haiwen, Jayaseelan, D.D., Bogomol, I., Reece, M.J., Hu, Chunfeng, Grasso, S. and Lee, W.E. (2019) A novel microstructural design to improve the oxidation resistance of ZrB[sub]2-SiC ultra-high temperature ceramics (UHTCs). Journal of Alloys and Compounds, 785, pp. 958-964. ISSN (print) 0925-8388

Zhelyazov, T. and Donchev, T. (2019) Finite element modelling of FRP – strengthened structural elements. In: IABSE Symposium 2019 : Towards a Resilient Built Environment Risk and Asset Management; 27 - 29 Mar 2019, Guimaraes, Portugal. (Unpublished)