2017

Afrouzian, Ali, Movahhedi Aleni, Hossein, Liaghat, Gholamhossein and Ahmadi, Hamed (2017) Effect of nano-particles on the tensile, flexural and perforation properties of the glass/epoxy composites. Journal of Reinforced Plastics and Composites, 36(12), pp. 900-916. ISSN (print) 0731-6844

Arter, William E., D'Arsie, Lorenzo, Wu, Xingyi, Esconjauregui, Santiago and Robertson, John (2017) Adsorptive graphene doping : effect of a polymer contaminant. Applied Physics Letters, 110(22), p. 223104. ISSN (print) 0003-6951

Azadboni, Reza Khodadadi, Wen, Jennifer X., Heidari, Ali and Wang, Changjian (2017) Numerical modelling of deflagration to detonation transition in inhomogeneous hydrogen/air mixtures. Journal of Loss Prevention in the Process Industries, 49(B), pp. 722-730. ISSN (print) 0950-4230

Barra, Giuseppina, Vertuccio, Luigi, Vietri, Umberto, Naddeo, Carlo, Hadavinia, Homayoun and Guadagno, Liberata (2017) Toughening of epoxy adhesives by combined interaction of carbon nanotubes and silsesquioxanes. Materials, 10(10), p. 1131. ISSN (online) 1996-1944

Bhatti, Jawaad, Hale, Matthew, Iravani, Pejman, Plummer, Andrew and Sahinkaya, Necip (2017) Adaptive height controller for an agile hopping robot. Robotics and Autonomous Systems, 98, pp. 126-134. ISSN (print) 0921-8890

Bin Junaid, Ali, Konoiko, Aleksey, Zweiri, Yahya, Sahinkaya, M. Necip and Senevirante, Lakmal (2017) Autonomous wireless self-charging for multi-rotor unmanned aerial vehicles. Energies, 10(6), p. 803. ISSN (online) 1996-1073

Bulat, P. V. and Volkov, K. N. (2017) Solution of two-dimensional Riemann problems using the method of piecewise parabolic reconstruction. Journal of Engineering Physics and Thermophysics, 90(3), pp. 525-534. ISSN (print) 1062-0125

Bulat, P.V., Ilyina, T.E., Volkov, K.N., Silnikov, M.V. and Chernyshov, M.V. (2017) Interaction of a shock wave with an array of particles and effect of particles on the shock wave weakening. Acta Astronautica, 135, pp. 131-138. ISSN (print) 0094-5765

Cadavid, M Ospina, Al-Khudairi, O, Hadavinia, H, Goodwin, D and Liaghat, G (2017) Experimental studies of stiffness degradation and dissipated energy in glass fibre reinforced polymer composite under fatigue loading. Polymers and Polymer Composites, 25(6), pp. 435-446. ISSN (print) 0967-3911

Caneva, Sabina, Martin, Marie-Blandine, D’Arsié, Lorenzo, Aria, Adrianus I., Sezen, Hikmet, Amati, Matteo, Gregoratti, Luca, Sugime, Hisashi, Esconjauregui, Santiago, Robertson, John, Hofmann, Stephan and Weatherup, Robert S. (2017) From growth surface to device interface : preserving metallic Fe under monolayer hexagonal boron nitride. ACS Applied Materials & Interfaces, 9(35), pp. 29973-29981. ISSN (print) 1944-8244

Domun, Nadiim, Paton, Keith R., Hadavinia, Homayoun, Sainsbury, Toby, Zhang, Tao and Mohamud, Hibaaq (2017) Enhancement of fracture toughness of epoxy nanocomposites by combining nanotubes and nanosheets as fillers. Materials, 10(1179), ISSN (print) 1996-1944

Domun, Nadiim, Hadavinia, Homayoun, Zhang, Tao, Liaghat, Gholamhossein, Vahid, Samireh, Spacie, Chris, Paton, Keith R. and Sainsbury, Toby (2017) Improving the fracture toughness properties of epoxy using graphene nanoplatelets at low filler content. Nanocomposites, 3(3), pp. 85-96. ISSN (print) 2055-0324

Emelyanov, V.N., Teterina, I.V., Volkov, K.N. and Garkushev, A.U. (2017) Pressure oscillations and instability of working processes in the combustion chambers of solid rocket motors. Acta Astronautica, 135, pp. 161-171. ISSN (print) 0094-5765

Essa, K., Hassanin, H., Attallah, M.M., Adkins, N.J., Musker, A.J., Roberts, G.T., Tenev, N. and Smith, M. (2017) Development and testing of an additively manufactured monolithic catalyst bed for HTP thruster applications. Applied Catalysis A General, 542, pp. 125-135. ISSN (print) 0926-860X

Essa, Khamis, Modica, Francesco, Imbaby, Mohamed, El-Sayed, Mahmoud Ahmed, ElShaer, Amr, Jiang, Kyle and Hassanin, Hany (2017) Manufacturing of metallic micro components using hybrid soft lithography and micro-electrical discharge machining. The International Journal of Advanced Manufacturing Technology, 91(1-4), pp. 445-452. ISSN (print) 0268-3768

Fountas, N. A., Vaxevanidis, N. M., Stergiou, C. I. and Benhadj-Djilali, R. (2017) A virus-evolutionary multi-objective intelligent tool path optimization methodology for 5-axis sculptured surface CNC machining. Engineering with Computers, 33(3), pp. 375-391. ISSN (print) 0177-0667

Fountas, N.A, Stergiou, C.I., Vaxevanidis, N.M. and Benhadj-Djilali, R. (2017) A generic multi-axis post-processor engine for optimal CNC data creation and intelligent surface machining. In: 9th International Congress on Precision Machining; 06 - 09 Sep 2017, Glyfada, Greece. (Submitted)

Gheisari, M., Nezamabadi, A. and Khazaeinejad, P. (2017) On buckling of cylindrical shells under combined loading. Journal of Advanced Manufacturing Technology, 11(2), pp. 9-18. ISSN (print) 1985-3157

Haghbin, Amin, Liaghat, Gholamhossein, Hadavinia, Homayoun, Arabi, Amir Masoud and Pol, Mohammad Hossein (2017) Enhancement of the electrical conductivity and interlaminar shear strength of CNT/GFRP hierarchical composite using an electrophoretic deposition technique. Materials, 10(10), p. 1120. ISSN (online) 1996-1944

Hassanin, Hany, Al-Kinani, Ali, ElShaer, Amr, Polycarpou, Elena, El-Sayed, Mahmoud Ahmed and Essa, Khamis (2017) Stainless steel with tailored porosity using canister-free hot isostatic pressing for improved osseointegration implants. Journal of Materials Chemistry B, 5(47), pp. 9384-9394. ISSN (print) 2050-750X

Hedayatian, M., Liaghat, G.H., Rahimi, Gh, Pol, M.H., Hadavinia, H. and Zamani, R. (2017) Investigation of the high velocity impact behavior of grid cylindrical composite structures. Polymer Composites, 38(11), pp. 2603-2608. ISSN (print) 0272-8397

Heidari, A. and Wen, J. (2017) Numerical simulation of detonation failure and re-initiation in bifurcated tubes. International Journal of Hydrogen Energy, 42(11), pp. 7353-7359. ISSN (print) 0360-3199

Irukuvarghula, S., Hassanin, H., Cayron, C., Attallah, M.M., Stewart, D. and Preuss, M. (2017) Evolution of grain boundary network topology in 316L austenitic stainless steel during powder hot isostatic pressing. Acta Materialia, 133, pp. 269-281. ISSN (print) 1359-6454

Jiang, Pingfei, Atherton, Mark, Harrison, David and Malizia, Alessio (2017) Framework of mechanical design knowledge representations for avoiding patent infringement. In: 21st International Conference on Engineering Design (ICED17); 21-25 Aug 2017, Vancouver, Canada.

Khodadadi Azadboni, Reza, Heidari, Ali and Wen, Jennifer X. (2017) CFD analysis of deflagration to detonation transition in homogenous and inhomogeneous hydrogen-air mixtures. In: UK Consortium on Turbulent Reacting Flows (UKCTRF) Annual Meeting; 07-08 Sep 2017, Southampton, U.K.. (Unpublished)

Khodadadi Azadboni, Reza, Heidari, Ali and Wen, Jennifer X (2017) Numerical modelling of flame acceleration and transition to detonation in hydrogen/air mixtures with concentration gradient. In: International Conference On Hydrogen Safety (ICHS 2017); 11-13 Sep 2017, Hamburg, Germany. (Unpublished)

Khodadadi Azadboni, Reza, Heidari, Ali, Boeck, Lorenz R. and Wen, Jennifer X. (2017) Numerical study of deflagration-to-detonation transition in homogenous and inhomogeneous hydrogen-air mixtures. In: The International Colloquium on the Dynamics of Explosions and Reactive Systems (ICDERS); 30 Jul – 04 Aug 2017, Boston, U.S.. (Unpublished)

Khodadadi Azadboni, Reza, Wen, Jennifer and Heidari, Ali (2017) A computational fluid dynamic investigation of inhomogeneous hydrogen flame acceleration and transition to detonation. In: 10th Mediterranean Combustion Symposium (MCS-10); 17-21 Sep 2017, Naples, Italy. (Unpublished)

Lerdprom, Wirat, Zapata-Solvas, Eugenio, Jayaseelan, Doni D., Borrell, Amparo, Salvador, Maria. D. and Lee, William. E. (2017) Impact of microwave processing on porcelain microstructure. Ceramics International, 43(16), pp. 13765-13771. ISSN (print) 0272-8842

Levermore, Thomas (2017) Innovative powertrain control systems for a premium vehicle. (PhD thesis), Kingston University, .

Li, Yongfeng, Tao, Fei, Cheng, Ying, Zhang, Xianzhi and Nee, A.Y.C. (2017) Complex networks in advanced manufacturing systems. Journal of Manufacturing Systems, 43(3), pp. 409-421. ISSN (print) 0278-6125

Lin, Y., Vadlamani, R., Savill, M. and Tucker, P. (2017) Wall-resolved large eddy simulation for aeroengine aeroacoustic investigation. The Aeronautical Journal, 121(1242), pp. 1032-1050. ISSN (print) 0001-9240

Liu, Jian, Hassanin, Hany, Ni, Zhenyu, Yang, Yi, Yang, Gang and Jiang, Kyle (2017) Production of high precision micro metallic components by electroforming process. Materials and Manufacturing Processes, 32(12), pp. 1325-1330. ISSN (print) 1042-6914

Nanayakkara, Visakha K., Cotugno, Giuseppe, Vitzilaios, Nikolaos, Venetsanos, Demetrios, Nanayakkara, Thrishantha and Sahinkaya, M. Necip (2017) The role of morphology of the thumb in anthropomorphic grasping : a review. Frontiers in Mechanical Engineering, 3(5), ISSN (online) 2297-3079

Rayner, Robert M.C., Sahinkaya, M. Necip and Hicks, Ben (2017) Improving the design of high speed mechanisms through multi-level kinematic synthesis, dynamic optimization and velocity profiling. Mechanism and Machine Theory, 118, pp. 100-114. ISSN (print) 0094-114X

Sabouri, Aydin, Yetisen, Ali K., Sadigzade, Rashad, Hassanin, Hany, Essa, Khamis and Butt, Haider (2017) Three-dimensional microstructured lattices for oil sensing. Energy & Fuels, 31(3), pp. 2524-2529. ISSN (print) 0887-0624

Shanazari, H, Liaghat, GH, Feli, S and Hadavinia, H (2017) Analytical and experimental study of high-velocity impact on ceramic/nanocomposite targets. Journal of Composite Materials, 51(27), pp. 3743-3756. ISSN (print) 0021-9983

Shi, Zhenyu and Zhang, Xianzhi (2017) Contact angle hysteresis analysis on superhydrophobic surface based on the design of channel and pillar models. Materials & Design, 131, pp. 323-333. ISSN (print) 0264-1275

Shi, Zhenyu, Zhao, Tianming, Wan, Yi and Zhang, Xianzhi (2017) Development of a micropump composed of three gears with Logix tooth profiles fabricated by micromilling technology. The International Journal of Advanced Manufacturing Technology, 92(1-4), pp. 1507-1517. ISSN (print) 0268-3768