Items where Research Area is "Research Areas > General engineering and mineral and mining engineering"

Up a level
Export as [feed] Atom [feed] RSS
Group by: First Author/Editor | Item Type | Year
Number of items: 23.

Article

Aluri, N.K., Pantangi, P.K.G., Muppala, S.P.R. and Dinkelacker, F. (2005) A numerical study promoting algebraic models for the Lewis number effect in atmospheric turbulent premixed Bunsen flames. Flow, Turbulence and Combustion, 75(1-4), pp. 149-172. ISSN (print) 1386-6184

Boustras, G and Wen, J.X. (2005) A study on the socio-economic and demographic significance of fire in the devleoped world and the developing countries. International Journal on Engineering Performance-Based Fire Codes, 7(2), pp. 57-64.

Dembele, S., Zhang, J. and Wen, J.X. (2005) Assessments of spectral narrow band and weighted-sum-of-gray-gases models for computational fluid dynamics simulations of pool fires. Numerical Heat Transfer Part B, 48(3), pp. 257-276. ISSN (print) 1040-7790

Dembele, S. and Wen, J. (2005) Predicting Glazing Behaviour in a Fire Environment - Effect of Radiation Models. FABIG Newsletter, R570(45),

Ferraris, S., Wen, J.X. and Dembele, S. (2005) Large-eddy simulation of a large-scale methane pool fire. Fire Safety Science, 8, pp. 963-974.

Fried, A.N., Tovey, A.K and Roberts, J.J. (2005) Comparison of current approaches to the design of masonry diaphragm walls. Masonry International, 18(2), pp. 55-66. ISSN (print) 0950-2289

Gwane, D.T., Liu, B., Bao, Y. and Zhang, T. (2005) Modelling of plasma-particle two-phase flow using statistical techniques. Surface and Coatings Technology, 191(2-3), pp. 242-254. ISSN (print) 0257-8972

Hay, G.I., Evans, P.S.A., Harrison, D.J., Southee, D., Simpson, G. and Harrey, P.M. (2005) Characterization of lithographically printed resistive strain gauges. IEEE Sensors Journal, 5(5), pp. 864-871. ISSN (print) 1530-437x

Laicini, M., Spearman, P., Tavazzi, S. and Borghesi, A. (2005) Microscopic calculation of dielectric tensor of quaterthiophene crystals. Physical Review B, 71(4), 0-0. ISSN (online) 1098-0121

Limbachiya, M., Roberts, J.J. and Fried, A.N. (2005) Thin joint masonry in the UK. Masonry International, 18(2), pp. 85-88. ISSN (print) 0950-2289

Maidi, M. and Lesieur, M. (2005) Large eddy simulations of spatially growing subsonic and supersonic turbulent round jets. Journal of Turbulence, 6, pp. 1-20. ISSN (online) 1468-5248

Muppala, S.P.Reddy, Aluri, Naresh K., Dinkelacker, Friedrich and Leipertz, Alfred (2005) Development of an algebraic reaction rate closure for the numerical calculation of turbulent premixed methane, ethylene, and propane/air flames for pressures up to 1.0 MPa. Combustion and Flame, 140(4), pp. 257-266. ISSN (online) 0010-2180

Murray, M.G. and Murray, P.M. (2005) WatSup model: a high resolution water supply modelling system. Journal of Hydroinformatics, 7(2), pp. 79-89. ISSN (print) 1464-7141

Setoodeh, A.R., Hadavinia, H., Biglari, F.R. and Nikbin, K. (2005) Comparison of analytical, numerical and experimental methods in deriving fracture toughness properties of adhesives using bonded double lap joint specimens. Journal of Adhesion, 81(5), pp. 529-553. ISSN (print) 0021-8464

Sáez, Doris, Ordys, Andrzej and Grimble, Michael (2005) Design of a supervisory predictive controller and its application to thermal power plants. Optimal Control Applications and Methods, 26(4), pp. 169-198. ISSN (print) 0143-2087

Williams, J.G., Hadavinia, H. and Cotterell, B. (2005) Anisotropic elastic and elastic-plastic bending solutions for edge constrained beams. International Journal of Solids and Structures, 42(18-19), pp. 4927-4946. ISSN (print) 0020-7683

Zhang, J., Dembele, S. and Wen, J.X. (2005) Effect of radiation models on CFD simulations of upward flame spread. Fire Safety Science, 8, pp. 421-432.

Zhang, T., Bao, Y. and Gawne, D.T. (2005) Non-steady state heating of substrate and coating during thermal-spray deposition. Surface and Coatings Technology, 194(1), pp. 82-90. ISSN (print) 0257-8972

Zhang, T., Liu, B., Bao, Y. and Gawne, D.T. (2005) Statistical analysis of the motion and heating of particles in a plasma jet. Plasma Chemistry and Plasma Processing, 25(4), pp. 403-425. ISSN (print) 0272-4324

Conference or Workshop Item

Aluri, N.K., Sha, Q, Muppala, S.P.R. and Dinkelacker, F. (2005) Flame surface density models - A numerical evaluation. In: European Combustion meeting; 3 - 6 Apr 2005, Louvain-la-Neuve, Belgium.

Muppala, S.P.R., Aluri, N.K. and Dinkelacker, F. (2005) A test of validation of turbulent premixed models for high-pressure bunsen flames. In: European Combustion meeting; 3 - 6 Apr 2005, Louvain-la-Neuve, Belgium.

Xu, B.P, Zhang, J.P., Wen, J.X., Dembele, S. and Karwatzki, J. (2005) Numerical study of a highly under-expanded hydrogen jet. In: International Conference on Hydrogen Safety; 8-10 September 2005, Pisa, Italy. (Unpublished)

Thesis

Muppala, Siva Prasad Reddy (2005) Modelling of turbulent premixed high-pressure combustion with application towards gas turbine combustors. (PhD thesis), Friedrich-Alexander-Universitat Erlangen-Nurnberg, .

This list was generated on Fri Dec 20 02:08:47 2024 GMT.