A

Aluri, N.K., Sha, Q, Muppala, S.P.R. and Dinkelacker, F. (2005) Flame surface density models - A numerical evaluation. In: European Combustion meeting; 3 - 6 Apr 2005, Louvain-la-Neuve, Belgium.

Aluri, N.K., Pantangi, P.K.G., Muppala, S.P.R. and Dinkelacker, F. (2005) A numerical study promoting algebraic models for the Lewis number effect in atmospheric turbulent premixed Bunsen flames. Flow, Turbulence and Combustion, 75(1-4), pp. 149-172. ISSN (print) 1386-6184

B

Boustras, G and Wen, J.X. (2005) A study on the socio-economic and demographic significance of fire in the devleoped world and the developing countries. International Journal on Engineering Performance-Based Fire Codes, 7(2), pp. 57-64.

D

Dembele, S., Zhang, J. and Wen, J.X. (2005) Assessments of spectral narrow band and weighted-sum-of-gray-gases models for computational fluid dynamics simulations of pool fires. Numerical Heat Transfer Part B, 48(3), pp. 257-276. ISSN (print) 1040-7790

Dembele, S. and Wen, J. (2005) Predicting Glazing Behaviour in a Fire Environment - Effect of Radiation Models. FABIG Newsletter, R570(45),

F

Ferraris, S., Wen, J.X. and Dembele, S. (2005) Large-eddy simulation of a large-scale methane pool fire. Fire Safety Science, 8, pp. 963-974.

Fried, A.N., Tovey, A.K and Roberts, J.J. (2005) Comparison of current approaches to the design of masonry diaphragm walls. Masonry International, 18(2), pp. 55-66. ISSN (print) 0950-2289

G

Gwane, D.T., Liu, B., Bao, Y. and Zhang, T. (2005) Modelling of plasma-particle two-phase flow using statistical techniques. Surface and Coatings Technology, 191(2-3), pp. 242-254. ISSN (print) 0257-8972

H

Hay, G.I., Evans, P.S.A., Harrison, D.J., Southee, D., Simpson, G. and Harrey, P.M. (2005) Characterization of lithographically printed resistive strain gauges. IEEE Sensors Journal, 5(5), pp. 864-871. ISSN (print) 1530-437x

L

Laicini, M., Spearman, P., Tavazzi, S. and Borghesi, A. (2005) Microscopic calculation of dielectric tensor of quaterthiophene crystals. Physical Review B, 71(4), 0-0. ISSN (online) 1098-0121

Limbachiya, M., Roberts, J.J. and Fried, A.N. (2005) Thin joint masonry in the UK. Masonry International, 18(2), pp. 85-88. ISSN (print) 0950-2289

M

Maidi, M. and Lesieur, M. (2005) Large eddy simulations of spatially growing subsonic and supersonic turbulent round jets. Journal of Turbulence, 6, pp. 1-20. ISSN (online) 1468-5248

Muppala, S.P.R., Aluri, N.K. and Dinkelacker, F. (2005) A test of validation of turbulent premixed models for high-pressure bunsen flames. In: European Combustion meeting; 3 - 6 Apr 2005, Louvain-la-Neuve, Belgium.

Muppala, S.P.Reddy, Aluri, Naresh K., Dinkelacker, Friedrich and Leipertz, Alfred (2005) Development of an algebraic reaction rate closure for the numerical calculation of turbulent premixed methane, ethylene, and propane/air flames for pressures up to 1.0 MPa. Combustion and Flame, 140(4), pp. 257-266. ISSN (online) 0010-2180

Muppala, Siva Prasad Reddy (2005) Modelling of turbulent premixed high-pressure combustion with application towards gas turbine combustors. (PhD thesis), Friedrich-Alexander-Universitat Erlangen-Nurnberg, .

Murray, M.G. and Murray, P.M. (2005) WatSup model: a high resolution water supply modelling system. Journal of Hydroinformatics, 7(2), pp. 79-89. ISSN (print) 1464-7141

S

Setoodeh, A.R., Hadavinia, H., Biglari, F.R. and Nikbin, K. (2005) Comparison of analytical, numerical and experimental methods in deriving fracture toughness properties of adhesives using bonded double lap joint specimens. Journal of Adhesion, 81(5), pp. 529-553. ISSN (print) 0021-8464

Sáez, Doris, Ordys, Andrzej and Grimble, Michael (2005) Design of a supervisory predictive controller and its application to thermal power plants. Optimal Control Applications and Methods, 26(4), pp. 169-198. ISSN (print) 0143-2087

W

Williams, J.G., Hadavinia, H. and Cotterell, B. (2005) Anisotropic elastic and elastic-plastic bending solutions for edge constrained beams. International Journal of Solids and Structures, 42(18-19), pp. 4927-4946. ISSN (print) 0020-7683

X

Xu, B.P, Zhang, J.P., Wen, J.X., Dembele, S. and Karwatzki, J. (2005) Numerical study of a highly under-expanded hydrogen jet. In: International Conference on Hydrogen Safety; 8-10 September 2005, Pisa, Italy. (Unpublished)

Z

Zhang, J., Dembele, S. and Wen, J.X. (2005) Effect of radiation models on CFD simulations of upward flame spread. Fire Safety Science, 8, pp. 421-432.

Zhang, T., Bao, Y. and Gawne, D.T. (2005) Non-steady state heating of substrate and coating during thermal-spray deposition. Surface and Coatings Technology, 194(1), pp. 82-90. ISSN (print) 0257-8972

Zhang, T., Liu, B., Bao, Y. and Gawne, D.T. (2005) Statistical analysis of the motion and heating of particles in a plasma jet. Plasma Chemistry and Plasma Processing, 25(4), pp. 403-425. ISSN (print) 0272-4324