2004

Adjali, M.H., Davies, M. and Rees, S.W. (2004) A comparative study of design guide calculations and measured heat loss through the ground. Building and Environment, 39(11), pp. 1301-1311. ISSN (print) 0360-1323

Ahmed, A., Fried, A.N., Limbachiya, M.C. and Roberts, J.J. (2004) Advantages and implications of high performance low density aircrete product for the UK construction industry. In: 13th International Brick/Block Masonry Conference; 4- 7 July 2004, Amsterdam, Netherlands.

Bromhead, E.N. and Ibsen, M.-L. (2004) Bedding-controlled coastal landslides in Southeast Britain between Axmouth and the Thames Estuary. Landslides, 1(2), pp. 131-141. ISSN (print) 1612-510X

Doni Jayaseelan, D, Amutha Rani, D, Benny Anburaj, D and Ohji, T (2004) Pulse electric current sintering and microstructure of industrial mullite in the presence of sintering aids. Ceramics International, 30(4), pp. 539-543. ISSN (print) 0272-8842

Duran, O, Althoefer, K and Seneviratne, L (2004) Automated pipe inspection using ANN and laser data fusion. In: IEEE International conference on robotics and automation; 24 - 27 April 2004, New Orleans, USA. (IEE International Conference on Robotics and Automation 2004; Proceedings ICRA, no. 5) ISSN (print) 1050-4729

Duran, O, Althoefer, K and Seneviratne, L (2004) Laser profiler model for robot-based pipe inspection. In: World Automation Congress (WAC'04), Tenth International Symposium on Robotics and Applications (ISORA-101); 28 June - 1 July 2004, Seville, Spain. (Robotics and Applications; WAC 2004; ISORA 2004; TSI Press Series, no. 15) ISBN 9781889335216

Duran, Olga (2004) Automated laser and pipe inspection. (PhD thesis), Kings's College, London, .

Fried, A.N., Roberts, J.J., Limbachiya, M.C. and Kanyeto, O. (2004) Predicting the behaviour of laterally loaded masonry panels. In: 13th International Brick/Block Masonry Conference; 4- 7 July 2004, Amsterdam, Netherlands.

Ibsen, M.-L. and Casagli, N. (2004) Rainfall patterns and related landslide incidence in the Porretta-Vergato region, Italy. Landslides, 1(2), pp. 143-150. ISSN (print) 1612-510X

Jayaseelan, D. Doni, Ueno, Shunkichi, Ohji, Tatsuki and Kanzaki, Shuzo (2004) Differential sintering by improper selection of sintering parameters during pulse electric current sintering. Journal of the American Ceramic Society, 87(1), pp. 159-161. ISSN (print) 0002-7820

Jayaseelan, D. Doni, Ueno, S., Ohji, T. and Kanzaki, S. (2004) Sol–gel synthesis and coating of nanocrystalline Lu[sub]2Si[sub]2O[sub]7 on Si[sub]3N[sub4 substrate. Materials Chemistry and Physics, 84(1), pp. 192-195. ISSN (print) 0254-0584

Jayaseelan, D. Doni, Ueno, S., Ohji, T. and Kanzaki, S. (2004) Thermo-mechanical stability of porous alumina : effect of sintering parameters. Science and Technology of Advanced Materials, 5(4), pp. 387-392. ISSN (print) 1468-6996

Kang, Yun (2004) Large eddy simulation of turbulent diffusion flames and pool fires. (PhD thesis), Kingston University, .

Kita, Hideki, Osumi, Kazuo, Ueno, Syunkichi, Jayaseelan, D. Doni and Iizuka, Tateoki (2004) State of small amount of elements in silicon nitride fabricated by post-sintering process using low-grade silicon powder as raw materials. Journal of the Ceramic Society of Japan, 112(1312), pp. 665-668. ISSN (print) 0914-5400

Koulouris, A., Limbachiya, M.C., Fried, A.N. and Roberts, J.J. (2004) Use of recycled aggregate in concrete application : case studies. In: Sustainable Waste Management and Recycling: Challenges and Opportunities.; 14 - 15 Sept 2004, Kingston, U.K..

Limbachiya, M.C., Koulouris, A., Roberts, J.J. and Fried, A.N. (2004) Performance of recycled aggregate concrete. In: RILEM International Symposium on Environment-Conscious Materials and Systems for Sustainable Development; 6-7 Sep 2004, Koriyama, Japan. ISBN 2912143551

Lung, A.W.M., Benhadj-Djilali, R. and Garcia, J.A. (2004) Web-based integration for virtual factory implementation. In: Cheng, Kai , Webb, David and Marsh, Rodney, (eds.) Advances in E-Engineering and Digital Enterprise Technology: Proceedings of the 4th International Conference on E-Engineering and Digital Enterprise. Bury St. Edmunds, Suffolk, UK : Professional Engineering Publishing. pp. 553-559. ISBN 9781860584671

Mansouri, H., Monshi, A. and Hadavinia, H. (2004) Effect of local induction heat treatment on the residual stresses in the web region of a welded rail. The Journal of Strain Analysis for Engineering Design, 39(3), pp. 271-283. ISSN (print) 0309-3247

Muppala, S.P.R. and Dinkelacker, F (2004) Numerical modelling of the pressure dependent reaction source term for premixed turbulent methane/air flames. Progress in Computational Fluid Dynamics, an International Journal, 4(6), 328- 336. ISSN (print) 1468-4349

Sabir, H.M., Chretienneau, R. and ElHag, Y.B.M. (2004) Analytical study of a novel GAX-R heat driven refrigeration cycle. Applied Thermal Engineering, 24(14-15), pp. 2083-2099. ISSN (print) 1359-4311

Suvorovs, T, De Wit, JR, Osborne, BP and Steinberg, TA (2004) Investigation of burning aluminum in oxygen-enriched atmospheres through microanalysis techniques. Journal of ASTM International, 1(8), ISSN (online) 1546-962x

Thomas, Mark E., Petford, Nick and Bromhead, Edward N. (2004) Volcanic rock-mass properties from Snowdonia and Tenerife: implications for volcanic edifice strength. Journal of the Geological Society, 161(6), pp. 939-946. ISSN (print) 0016-7649

Tian, Y. S., Wang, J. and Lu, T. J. (2004) Racking strength and stiffness of cold-formed steel wall frames. Journal of Constructional Steel Research, 60(7), pp. 1069-1093. ISSN (print) 0143-974X

Tian, Y. S., Wang, J., Lu, T. J. and Barlow, C. Y. (2004) An experimental study on the axial behaviour of cold-formed steel wall studs and panels. Thin-Walled Structures, 42(4), pp. 557-573. ISSN (print) 0263-8231

Tsakiropoulos, P. and Wang, Yawei (2004) A study of particle size and velocities distributions in centrifugal atomisation using mathematical regression techniques. In: TMS 2004 : 133rd Annual Meeting & Exhibition; 14-18 Mar 2004, Charlotte, North Carolina, U.S.. (Unpublished)

Ueno, S., Jayaseelan, D. D., Kondo, N., Ohji, T. and Kanzaki, S. (2004) Corrosion behavior of Al[sub]2O[sub]3 in static state water vapor environment at high temperature. Journal of Materials Science, 39(21), pp. 6627-6629. ISSN (print) 0022-2461

Ueno, Shunkichi, Jayaseelan, D. Doni, Kondo, Naoki, Ohji, Tatsuki and Kanzaki, Shuzo (2004) Anisotropic behavior of water vapor corrosion of rutile TiO[sub]2 at high temperature. Materials Transactions, 45(2), pp. 281-283. ISSN (print) 1345-9678

Ueno, Shunkichi, Jayaseelan, D. Doni, She, Jihong, Kondo, Naoki, Ohji, Tatsuki and Kanzaki, Shuzo (2004) Carbon dioxide absorption mechanisms of sodium added to calcium oxide at high temperatures. Ceramics International, 30(6), pp. 1031-1034. ISSN (print) 0272-8842

Ueno, Shunkichi, Jayaseelan, D. Doni and Ohji, Tatsuki (2004) Development of oxide-based EBC for silicon nitride. International Journal of Applied Ceramic Technology, 1(4), pp. 362-373. ISSN (print) 1546-542X

Ueno, Shunkichi, Jayaseelan, D. Doni, Kondo, Naoki, Ohji, Tatsuki and Kanzaki, Shuzo (2004) High-temperature water vapor corrosion behavior of Lu[4]Hf[3]O[12] phase. Ceramics International, 30(6), pp. 865-867. ISSN (print) 0272-8842

Wang, XX, Guo, YY and Shu, PC (2004) Investigation into gas-solid heat transfer in a cryogenic vibrated fluidised bed. Powder Technology, 139(1), pp. 33-39. ISSN (print) 0032-5910

Zhang, T., Liu, B., Bao, Y. and Gawne, D.t. (2004) Process optimisation of plasma spraying using statistical modelling. In: International Thermal Spray Conference; 10-12 May 2004, Osaka, Japan. (Proceedings of the International Thermal Spray Conference)

Zweiri, Y.H., Seneviratne, L.D and Althoefer, K. (2004) Identification methods for excavator arm parameters. In: SICE 2004 Annual Conference; 4-6 Aug 2004, Sapporo, Japan.