Items where Research Area is "Metallurgy and materials"

Up a level
Export as [feed] Atom [feed] RSS
Group by: First Author/Editor | Item Type | Year
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | P | R | S | T | V | W | Y | Z
Number of items at this level: 93.

A

Amiri-Rad, Ahmad, Mashayekhi, Mohammad, van der Meer, Frans P. and Hadavinia, Homa (2015) A two-scale damage model for high cycle fatigue delamination in laminated composites. Composites Science and Technology, 120(4), pp. 32-38. ISSN (print) 0266-3538

Atkinson, P.A., Skinner, G.A. and Haines, P.J. (2001) The mechanism of action of tin compounds as flame retardants and smoke suppressants for polyester thermosets. Polymer Degradation and Stability, 71(3), pp. 351-360. ISSN (print) 0141-3910

Atkinson, P.A., Haines, P.J. and Skinner, George (2000) Inorganic tin compounds as flame retardants and smoke suppressants for polyester thermosets. Thermochimica Acta, 360(1), pp. 29-40. ISSN (print) 0040-6031

Atkinson, P.A., Haines, P.J., Skinner, G.A. and Lever, T.J. (2000) Studies of fire-retardant polyester thermosets using thermal methods. Journal of Thermal Analysis and Calorimetry, 59(1-2), pp. 395-408. ISSN (print) 1388-6150

B

Bakhtiarian, Elaheh (2014) Synthesis and properties of conducting polymer blends. (PhD thesis), Kingston University.

Barton, Stephen, Bullock, Clive and Weir, Deborah (1996) The effects of ultrasound on the activities of some glycosidase enzymes of industrial importance. Enzyme and Microbial Technology, 18(3), pp. 190-194. ISSN (print) 0141-0229

Barton, Stephen, Pritchard, Geoffrey and Vaezi-Nejad, S.M (1993) Dielectric behaviour of crosslinked polyether resins during moisture absorption. Polymers and Polymer Composites, 1(1), pp. 19-26. ISSN (print) 0967-3911

Barton, Stephen, Ghortra, J. S., Matthews, A. E. and Pritchard, G (1989) The synthesis and characterization of vinyl-terminated oligomeric ethers. Polymer, 30(8), pp. 1546-1551. ISSN (print) 0032-3861

Barton, Stephen J., Foot, Peter J. S., Miller Tate, Philip C., Kishi, Mariko and Ghatora, Baljit (2013) The effects of gamma irradiation on medical grade poly(methyl methacrylate). Polymers and Polymer Composites, 21(1), pp. 1-8. ISSN (print) 0967-3911

Bavisi, B.H., Pritchard, G. and Ghotra, J.S. (1996) Measuring and reducing moisture penetration through thick laminates. Advances in Polymer Technology, 15(3), pp. 223-235. ISSN (print) 0730-6679

Brown, John W., Lambe, Gillian, Foot, Peter J.S. and Clipson, Jacqueline A. (2004) Synthesis and properties of a novel thiophene-based conducting copolymer with mesogenic groups attached parallel to the polymer backbone. Macromolecular Rapid Communications, 25(10), pp. 1000-1003. ISSN (print) 1022-1336

Brown, John W., Foot, Peter J. S., Gabaston, Laurence I., Ibison, Paul and Prevost, Adeline (2004) Synthesis of laser-alignable liquid crystalline conducting polymers. Macromolecular Chemistry and Physics, 205(14), pp. 1823-1828. ISSN (print) 1022-1352

Brown, John W. and Foot, Peter J.S. (2002) John W. Brown, Peter J.S. Foot Conducting polymers with swithchable magnetic/electronic properties. GB 2346148.

C

Cedillos-Barraza, Omar, Manara, Dario, Boboridis, Konstantinos, Watkins, Tyson, Grasso, Salvatore, Jayaseelan, Daniel, Konings, Rudy, Reece, Michael and Lee, William (2016) Investigating the highest melting temperature materials : a laser melting study of the TaC-HfC system. Scientific Reports, 6, p. 37962. ISSN (online) 2045-2322

Cerminara, M., Meinardi, F., Borghesi, A., Campione, M., Sassella, A., Spearman, P., Bongiovanni, G., Mura, A. and Tubino, R. (2003) Coherent emission from crystalline oligothiophenes with an even number of rings. Synthetic Metals, 139(3), pp. 765-768. ISSN (online) 0379-6779

Charsley, Stephen M., Jones, Christopher J., Neaves, Brian D., Kresinski, Roman A., McWhinnie, Sean L.W., McCleverty, Jon. A and Yellowlees, Lesley J. (2002) Synthesis, electrochemistry and spectroelectrochemistry of hydrazido(2-) bridged bimetallic molybdenum species, and the x-ray crystal structure of {Mo{HB(3,5-Me[sub]2pz)[sub]3}(NO)Cl}[sub]2([mu]-NHNH) in solid solution. Polyhedron, 21(8), pp. 849-857. ISSN (online) 0277-5387

D

Davies, Philip, Irena Kratochvilova, Irena, Ewels, Chris, Aqeel, Tariq, Martin, Nazaio, Fal'ko, Vladimir, Enoki, Toshiaki, Rodriguez-Fortea, Antonio, Kaneko, Katsumi, Turak, Ayse, Buono, Carlo, Kovalenko, Valeri, Ajayan, Pulickel, Heggie, Malcolm, Khare, Varsha, Hirsch, Andreas, Gspann, Thurid, Windle, Alan, Costa, Pedro, Shaffer, Milo, Casado, Juan, Chan-Park, Mary and Busquets, Rosa (2014) Doping and theory : general discussion. Faraday Discussions, 173, pp. 233-256. ISSN (print) 1359-6640

Dhiman, Dhruv (2014) Synthesis and properties of graphite intercalates and possible routes to graphene. (MSc(R) thesis), Kingston University.

Douglas, William E. and Overend, Andrew S. (1993) Curing reactions in acetylene terminated resins—III. DSC, TGA and TMA study of catalyzed cure of an ethynylaryl-terminated monomer. European Polymer Journal, 29(11), pp. 1513-1519. ISSN (print) 0014-3057

Douglas, William E. and Overend, Andrew S. (1993) Curing reactions in acetylene-terminated resins. Part 2.—Differential scanning calorimetric, thermal gravimetric and thermomechanical analytical study of catalysed cure of an aryl prop-2-ynyl ether-terminated monomer. Journal of Materials Chemistry, 3(1), pp. 27-31. ISSN (print) 0959-9428

Douglas, William E. and Overend, Andrew S. (1993) Curing reactions in acetylene-terminated resins. Part 4.—IR and NMR study of catalysed polymerization of aryl prop-2-ynyl etherterminated monomers. Journal of Materials Chemistry, 3(10), pp. 1019-1024. ISSN (print) 0959-9428

Douglas, William E. and Overend, Andrew S. (1993) Nickelocene-catalyzed polymerization of acetylenes. Journal of Organometallic Chemistry, 444(1-2), C62-C64. ISSN (print) 0022-328X

E

Evans, S.J., Haines, P.J. and Skinner, G.A. (1997) The thermal degradation of polyester resins II. The effects of cure and of fillers on degradation. Thermochimica Acta, 291(1-2), pp. 43-49. ISSN (print) 0040-6031

Evans, S.J., Haines, P.J. and Skinner, G.A. (1996) The effects of structure on the thermal degradation of polyester resins. Thermochimica Acta, 278(1-2), pp. 77-89. ISSN (print) 0040-6031

F

Foot, P.J.S., Ghatora, Baljit, Barton, Steve and Sabagh, Bassem (2011) Investigating polymer degradation with triple detection GPC/SEC. Separation Science, 3(6), pp. 2-7.

Foot, Peter J.S., Miah, Mijan, Montgomery, Vincent and Youngs, Ian (2002) The electronic properties of metal complexed poly(3-alkythiophene) films. Materials Research Bulletin, 37(12), pp. 2055-2066. ISSN (print) 0025-5408

Foot, Peter J.S., Ghatora, Baljit, Barton, Steve and Sabbagh, Bassem (2011) The effects of gamma sterilisation of PMMA for implanted intra-ocular lenses. Medical Plastics News, pp. 32-34.

Foot, Peter Jonathan Samuel [Patent holder], Brown, John William [Patent holder] and Gabaston, Laurence Isabelle [Patent holder] (2000) Peter J. S. Foot, John W. Brown, Laurence I. Gabaston Liquid-crystalline conducting polymers. GB2304723.

Foot, Peter Jonathan Samuel [Patent holder], Davis, Reginald [Patent holder] and Budd, Darren [Patent holder] (1998) Baxenden Chemicals Ltd. Conductive polymers and processes for their preparation. WO9841555 (A1).

Foot, Peter Jonathan Samuel [Patent holder], Brown, John William [Patent holder], Ibison, Paul [Patent holder] and Simon, Richard [Patent holder] (1998) Peter J. S. Foot, John W. Brown, Paul Ibison, Richard Simon Laser Processed Conducting Polymers. GB2318119.

French, M.A. and Pritchard, G. (1993) The fracture surfaces of hybrid fibre composites. Composites Science and Technology, 47(3), pp. 217-223. ISSN (print) 0266-3538

G

Gabaston, Laurence I., Foot, Peter J.S. and Brown, John W. (1996) Synthesis and properties of liquid crystalline aniline monomers and semiconducting polyaniline with mesogenic side-chains. Chemical Communications, 1996(3), pp. 429-430. ISSN (print) 1359-7345

Ghasemnejad, H. and Hadavinia, H. (2010) Off-axis crashworthiness characteristic of woven glass/epoxy composite box structures. Journal of Reinforced Plastics and Composites, 29(15), pp. 2306-2330. ISSN (print) 0731-6844

Ghatora, Baljit [Speaker] (2012) Post-operative complications of poly (methyl methacrylate) employed in intraocular lenses. In: Recent appointees in Materials Science; 05 - 07 Sep 2012, Glasgow, U.K..

Ghatora, Baljit (2010) Effects of gamma-ray sterilization on high molecular weight PMMA for biomedical applications. (Documentation) Malvern, U.K. : Malvern Instruments Ltd. 4 p. (Viscotek application note, no. MRK143)

Ghatora, Baljit, Foot, Peter, Barton, Stephen and Kishi, Mariko (2008) Investigation into the causes of post-operative calcification in intraocular lenses. In: Institute of Materials, Minerals and Mining Annual Conference 2008; 13-15 May 2008, Grantham, U.K..

Ghatora, Baljit, Foot, Peter, Barton, Stephen and Kishi, Mariko (2007) Investigation into the causes of post-operative calcification in intraocular lenses. In: 35th European Federation of the Contact Lens and IOL Industries Conference; 11-13 Oct 2007, Malaga, Spain. (Unpublished)

Ghiassee, N.B. (1986) Vapour-pressure equations for solid and liquid UF[sub]6. Journal of Nuclear Materials, 139(3), pp. 284-286. ISSN (print) 0022-3115

Ghotra, J.S. and Mackay, P. (1999) Moisture transmission through aramid, polyethylene and glass-fibre reinforced epoxy laminates. Polymers and Polymer Composites, 7(2), pp. 79-88. ISSN (print) 0967-3911

Ghotra, Joginder Singh (1999) Oilfield FRP liners face corrosion and high temperatures. Polymers and Polymer Composites, 7(3), pp. 143-164. ISSN (print) 0967-3911

Goddard, Sharon.L., Brown, Richard.J.C. and Ghatora, Baljit (2016) Determination of beryllium concentrations in UK ambient air. Atmospheric Environment, ISSN (print) 1352-2310 (Epub Ahead of Print)

H

Hill, Patricia G., Foot, Peter J.S. and Davis, Reg (1996) Novel inorganic/conjugated polymer nanocomposites. Synthetic Metals, 76(1-3), pp. 289-292. ISSN (print) 0379-6779

I

Ibison, Paul, Foot, Peter J.S. and Brown, John W. (1996) Preparation and characterization of polypyrrole, N-substituted with liquid crystalline moieties. Synthetic Metals, 76(1-3), pp. 297-300. ISSN (print) 0379-6779

Izzard, V. G., Hadavinia, H., Morris, V.J., Foot, P.J.S., Wilson, L. and Hewson, K. (2012) Compression and recovery behaviour of polyamide-6 based foams. Polymer & Polymer Composites, 20(5), p. 425. ISSN (print) 0967-3911

J

Jenkins, James T. and Koenders, M.A. (2005) Hydrodynamic interaction of rough spheres. Granular Matter, 7(1), pp. 13-18. ISSN (print) 1434-5021

K

Kemp, N.T., Kaiser, A.B., Trodahl, H.J., Chapman, B., Buckley, R.G., Partridge, A.C. and Foot, P.J.S. (2006) Effect of ammonia on the temperature-dependent conductivity and thermopower of polypyrrole. Journal of Polymer Science, pt.B: Polymer Physics, 44(9), pp. 1331-1338. ISSN (print) 0887-6266

Koenders, M.A. (2005) Constitutive properties of contacting materials with a finite-sized microstructure. Molecular Simulation, 31(13), pp. 873-882. ISSN (print) 0892-7022

Koenders, M.A. "Curt" and Reymann, Steffen (2000) Potential distribution and electrostatic forces in wedge-shaped geometries: analytical and numerical results. Journal of Colloid and Interface Science, 225(2), pp. 299-306. ISSN (print) 0021-9797

Koenders, MA, Gaspar, N and Liebhart, E (1999) The stress-state in a torsion shear cell filled with a Newtonian fluid. Journal Of Fluids Engineering, 121(3), pp. 560-567. ISSN (print) 0098-2202

Koenders, MA (1998) Effects of microstructure and non-linearity in heterogeneous materials. Journal of Physics D: Applied Physics, 31(15), pp. 1875-1882. ISSN (print) 0022-3727

Koenders, MA (1997) Evolution of spatially structured elastic materials using a harmonic density function. Physical Review E (PRE), 56(5), pp. 5585-5593. ISSN (print) 1539-3755

Kostic, B., Zhang, T. and Evans, J.R.G. (1993) Effect of molding conditions on residual stress in powder injection molding. International Journal of Powder Metallurgy, 29(3), 251 - 257. ISSN (print) 0888-7462

Kostic, B., Zhang, T. and Evans, J.R.G. (1992) The measurement of residual stress in injection-molded ceramics. Journal of the American Ceramic Society, 75(10), pp. 2773-2778. ISSN (print) 0002-7820

Kresinski, Roman A., Platt, Andrew W. G. and Seddon, Joanne A. (2000) Lanthanide complexes with O[sub]2PH[sub]2, O[sub]2P(CH[sub]2Cl)[sub]2 and O[sub]2P(CH[sub]2OH)[sub]2 ligands: a solid-state tubular micelle. CrystEngComm (Crystal Engineering Communications), 2, pp. 177-182. ISSN (online) 1466-8033

Kresinski, Roman A. (1999) Pyrazabole formation by thermolysis of the free acid of the hydrotris(pyrazolyl)borate ion. Journal of the Chemical Society - Dalton Transactions, 3, pp. 401-405. ISSN (print) 1477-9226

L

Lacey, Joseph, Ghatora, Baljit, Foot, Peter, Barton, Stephen and De Cock, Romain (2016) Intraocular lens calcification after DSEK : a mechanism and preventive technique. Cornea, 35(9), e28-e30. ISSN (print) 0277-3740

Lawrence, Royston G., Jones, Christopher J. and Kresinski, Roman A. (1996) Heteroleptic poly(pyrazolyl)borate derivatives of the lanthanides. Structural and electronic spectral studies of some salicylaldehyde complexes. Journal of the Chemical Society - Dalton Transactions, 4, pp. 501-507. ISSN (print) 1477-9226

Lees, Anthony M.J., Charnock, John M., Kresinski, Roman A. and Platt, Andrew W.G. (2001) Soultion and solid-state structures of lanthanide nitrate complexes with [(MeO)[sub]2P(O)][sub]2C(OH)R (R=Me,[sup]tBu). Inorganica Chimica Acta, 312(1-2), pp. 170-182. ISSN (online) 0020-1693

Lerdprom, W., Li, C., Jayaseelan, D.D., Skinner, S.J. and Lee, W.E. (2017) Temperature dependence of electrical conductivity of a green porcelain mixture. Journal of the European Ceramic Society, 37(1), pp. 343-349. ISSN (print) 0955-2219

Liu, J., Zhang, T., Bao, Y. and Gawne, D.T. (2010) Processing and properties of plasma sprayed silicon nitride-glass composite coatings. Advance in Applied Ceramics, 109(6), pp. 355-361. ISSN (print) 1743-6753

M

Meinardi, F., Cerminara, M., Sassella, A., Borghesi, A., Spearman, P, Bongiovanni, G., Mura, A. and Tubino, R. (2002) Intrinsic excitonic luminescence in odd and even numbered oligothiophenes. Physical Review Letters, 89(15), pp. 157403-157407. ISSN (online) 0031-9007

Miller Tate, P., Heshmati, P., Brown, A. and Wills, J. (1999) Design and synthesis of an optimum performance crosslinking resist based on poly (2,4-dimethylstyrene). Journal of Materials Science: Materials in Electronics, 10(1), pp. 1-7. ISSN (print) 0957-4522

Morgan, H., Foot, P.J.S. and Brooks, N.W. (2001) The effects of composition and processing variables on the properties of thermoplastic polyaniline blends and composites. Journal of Materials Science, 36(22), pp. 5369-5377. ISSN (print) 0022-2461

P

Persano, Luana, Camposeo, Andrea, Pisignano, Dario, Burini, Andrea, Spearman, Peter and Tavazzi, Silvia (2014) Electron-beam nanopatterning and spectral modulation of organic molecular light-emitting single crystals. Langmuir, 30(6), pp. 1643-1649. ISSN (print) 0743-7463

Poussin, Denis, Morgan, Huda and Foot, Peter J.S. (2003) Thermal doping of polyaniline by sulfonic acids. Polymer International, 52(3), pp. 433-438. ISSN (print) 0959-8103

R

Rabias, I., Hamerton, I., Howlin, B.J. and Foot, P.J.S. (1998) Theoretical studies of conducting polymers based on substituted polypyrroles. Computational and Theoretical Polymer Science, 8(3-4), pp. 265-271. ISSN (print) 1089-3156

S

Safa, M. M. A, Leather, J. A. and Anderson, J. C. (1979) Thin film microtransducers for elastohydrodynamic lubrication studies. Thin Solid Films, 64(2), pp. 257-262. ISSN (print) 0040-6090

Seddon, Joanne A., Jackson, Andrew R. W., Kresinski, Roman A. and Platt, Andrew W. G. (1996) Hypophosphite complexes of the lanthanide metals, [LN(H[sub]2PO[sub]2)x(OH)[sub]3-x(H[sub]2O)] (Ln = La---Nd, Sm, Eu, Dy---Er, Yb, Lu). Polyhedron, 15(11), pp. 1899-1902. ISSN (print) 0277-5387

Senghor, Dioumacor (2011) Lithological, fluid and structural controls of gold mineralization at Massawa, eastern Senegal. (MSc(R) thesis), Kingston University.

Shah, Jatin, Brown, John W., Buckley-Dhoot, Eileen and Bandara, Asoka J. (2000) The use of a phenylpyrazine liquid crystalline material with a liquid crystalline solvent mediator as an ion-selective electrode. Journal of Materials Chemistry, 10(12), pp. 2627-2628. ISSN (print) 0959-9428

Shanazari, H, Liaghat, GH, Hadavinia, H and Aboutorabi, A (2015) Analytical investigation of high-velocity impact on hybrid unidirectional/woven composite panels. Journal of Thermoplastic Composite Materials, ISSN (print) 0892-7057 (Epub Ahead of Print)

Spearman, P., Borghesi, A., Campione, M., Laicini, M., Moret, M. and Tavazzi, S. (2005) Directional dispersion in absorbance spectra of oligothiophene crystals. The Journal of Chemical Physics, 122(1), ISSN (print) 0021-9606

Swan, M. and Pritchard, G. (1992) The effects of a cure accelerator on the fracture toughness and morphology of a rubber-modified bismaleimide. Journal of Materials Science Letters, 11(21), pp. 1443-1445. ISSN (online) 1573-4811

T

Talal, S and Tate, PCM (1999) Comparison of the recovery mechanisms of rigid polymer foams following long term compression. Cellular Polymers, 18(5), pp. 315-327. ISSN (print) 0262-4893

Tate, PCM, Talal, S, Page, CJ and Scarrow, RK (2000) Accelerated compression set at elevated temperature in rigid polymer foams. Cellular Polymers, 19(5), pp. 309-318. ISSN (print) 0262-4893

Tate, PCM and Talal, S (1999) Compressive properties of rigid polyurethane foams. Polymers and Polymer Composites, 7(2), pp. 117-124. ISSN (print) 0967-3911

Torabmostaedi, Hosein and Zhang, Tao (2014) Computational study of the effect of processing parameters on the formation and growth of ZrO2 nanoparticles in FSP process. Chemical Engineering and Processing: Process Intensification, 78, pp. 1-10. ISSN (print) 0255-2701

V

Vekinis, G., Beaumont, P.W.R., Pritchard, G. and Wainwright, R. (1991) Dynamic observation of fracture in particulate-filled epoxy resins reinforced with rubber. Journal of Materials Science, 26(16), pp. 4527-4533. ISSN (print) 0022-2461

W

Wang, Z.P., Ghotra, J.S., Pritchard, G. and Rose, R.G. (1997) The mechanical properties of particulate-filled aramid and polyethylene laminates. Polymer International, 42(3), pp. 241-244. ISSN (print) 0959-8103

Whitby, R.L.D and Busquets, R. (2013) Nanomaterials and the environment: global impact of tiny materials. Nanomaterials and the Environment, 1, pp. 1-2. ISSN (online) 2299-1204

Y

Yang, Q., Pritchard, G., Phipps, M.A. and Rose, R.G. (1996) The damage tolerance of fire-retardant glass-epoxy laminates. Polymers and Polymer Composites, 4(4), pp. 239-246. ISSN (print) 0967-3911

Z

Zhang, T., Evans, J.R.G. and Bevis, M. (1997) Analysis of open-ended injection molding. Advances in Polymer Technology, 16(2), pp. 105-115. ISSN (print) 0730-6679

Zhang, T., Evans, J.R.G. and Bevis, M. (1996) Control of orientation in short fibre-reinforced metal matrix composites. International Journal of Powder Metallurgy, 32(4), pp. 331-339. ISSN (print) 0888-7462

Zhang, T. and Evans, J.R.G. (1993) Predicting the incidence of voids in injection molding of thick ceramic sections. Journal of the American Ceramic Society, 76(2), pp. 481-486. ISSN (print) 0002-7820

Zhang, T. and Evans, J.R.G. (1993) Relaxation effects in large injection moulded ceramic bodies. Journal of the European Ceramic Society, 12(1), 51 - 59. ISSN (print) 0955-2219

Zhang, T. and Evans, J.R.G. (1993) The solidification of large section in ceramic injection molding: I. Conventional molding. Journal of Materials Research, 8(1), pp. 187-194. ISSN (print) 0884-2914

Zhang, T. and Evans, J.R.G. (1993) The solidification of large section in ceramic injection molding: II Modulated Pressure Molding. Journal of Materials Research, 8(2), pp. 345-351. ISSN (print) 0884-2914

Zhang, T. and Evans, J.R.G. (1993) The use of a heated sprue in the injection moulding of large ceramic sections. British Ceramic Transactions, 92(4), 146 - 151. ISSN (print) 0967-9782

Zhang, T. and Evans, J.R.G. (1992) Calculation of temperature distributions during the solidification stage in ceramic injection molding. Journal of the American Ceramic Society, 75(8), pp. 2260-2267. ISSN (print) 0002-7820

Zhang, T. and Evans, J.R.G. (1991) Mechanical properties of injection moulding suspensions as a function of ceramic volume fraction and temperature. Journal of the European Ceramic Society, 7(3), pp. 155-163. ISSN (print) 0955-2219

Zhang, T. and Evans, J.R.G. (1991) The properties of a ceramic injection moulding suspensions based on a preceramic polymer. Journal of the European Ceramic Society, 7(6), pp. 405-412. ISSN (print) 0955-2219

Zhang, T. and Evans, J.R.G. (1990) Anomalies in the thermal expansion of ceramic injection moulding bodies. Journal of Materials Science Letters, 9(6), pp. 672-674. ISSN (print) 0261-8028

Zhang, Tao, Jiang, Zuozhao, Wu, Jianguang and Zhengang, Chen (1990) Influence of rheology behavior of ceramic mixes on injection molding of ceramic compacts. Journal of the American Ceramic Society, 73(7), 2171 - 2175. ISSN (print) 0002-7820

This list was generated on Tue Feb 14 04:08:53 2017 GMT.