2000

Adjali, M.H., Davies, M., Ni Riain, C. and Littler, J.G. (2000) In-situ measurements and numerical simulation of heat transfer beneath a heated ground floor slab. Energy and Buildings, 33(1), pp. 75-83. ISSN (print) 0378-7788

Awaji, Hideo, Choi, Seong-Min, Ebisudani, Toshiki and Jayaseelan, Doni Daniel (2000) Toughening mechanisms of structural ceramics. Journal of the Ceramic Society of Japan, 108(1258), pp. 611-613. ISSN (print) 0914-5400

Cazan, A., Safa, M. and Gohar, R. (2000) High-stability externally pressurized gas bearing. In: 16th National Conference on Manufacturing Research; 5-7 Sept 2000, London, UK. (Advances in Manufacturing Technology, no. 14) ISBN 9781860582677

Curley, AJ, Hadavinia, H, Kinloch, AJ and Taylor, AC (2000) Predicting the service-life of adhesively-bonded joints. International Journal of Fracture, 103(1), pp. 41-69. ISSN (print) 0376-9429

Davies, M., Zoras, S. and Adjali, M.H. (2000) Development and inter-model comparative testing of a novel earth-contact heat-transfer simulation method. Building Services Engineering Research and Technology, 21(1), pp. 19-25. ISSN (print) 0143-6244

Dembele, S., Wen, JX and Sacadura, JF (2000) Analysis of the two-flux model for predicting water spray transmittance in fire protection application. Journal Of Heat Transfer, 122(1), pp. 183-186. ISSN (print) 0022-1481

Dembele, S. and Wen, J.X. (2000) Investigation of a spectral formulation for radiative heat transfer in one-dimensional fires and combustion systems. International Journal of Heat and Mass Transfer, 43(21), pp. 4019-4030. ISSN (print) 0017-9310

Dembele, S. and Wen, J.X. (2000) Predicting the mass burning rates of liquid pool fires using CFD techniques. International Symposium on Combustion, Abstracts of Accepted Papers, B, p. 67. ISSN (print) 1540-7489

Evangelou, LD, Self, A and Allen, J (2000) The F-16 departure phenomena. Aircraft Engineering and Aerospace Technology, 72(2), pp. 102-108. ISSN (print) 1748-8842

Evangelou, Leonidas (2000) Identification of the F-16 in flight handling qualities at high angles of attack using a total systems simulation approach. (MPhil thesis), Kingston University, .

Grant, RJ and Smart, J (2000) A comparison of the SPATE stress analysis technique and finite element results for pin-loaded tubular joints. In: 9th International Scientific Conference on Achievements in Mechanical and Materials Engineering; 11-14 Oct 2000, Gdansk, Sopot, Poland. (AMME 2000) ISBN 8391445801

Hadavinia, H., Travis, R.P. and Fenner, R.T. (2000) C1-continuous generalised parabolic blending elements in the Boundary Element Method. Mathematical and Computer Modelling, 31(8-9), 17-34.. ISSN (print) 0895-7177

Jayaseelan, D.Doni, Rani, D.Amutha, Nishikawa, Tadahiro, Awaji, Hideo and Gnanam, F.D. (2000) Powder characteristics, sintering behavior and microstructure of sol–gel derived ZTA composites. Journal of the European Ceramic Society, 20(3), pp. 267-275. ISSN (print) 0955-2219

Kapadoukas, GG and Self, A (2000) A taxonomy of aircraft ground handling modes. Aircraft Engineering and Aerospace Technology, 72(4), pp. 328-333. ISSN (print) 1748-8842

Kinloch, A. J., Hadavinia, H., Blackman, B.R.K., Ring-Groth, M., Williams, J.G. and Busso, E.P. (2000) The peel behaviour of adhesive joints. In: UNSPECIFIED, (ed.) Proceedings of the Annual Meeting of the Adhesion Society. Adhesion Society. pp. 25-28. ISSN (print) 1086-9506

Liu, B., Zhang, T. and Gawne, D.T. (2000) Computational analysis of the influence of process parameters on the flow field of a plasma jet. Surface and Coatings Technology, 132(2-3), pp. 202-216. ISSN (print) 0257-8972

Lo, Sing Hon, Voke, Peter R. and Rockliff, Nicole J. (2000) Eddy structures in a simulated low Reynolds number turbulent boundary layer. Flow, Turbulence and Combustion, 64(1), pp. 1-28. ISSN (print) 1386-6184

Millar, Ross, Colclough, Eamon, Claridge, Robert, Hamid, Javid, Philbin, Simon and Chauhan, Naren (2000) Clean synthesis of energetic materials using solid-supported reactions and related technologies. In: 31st International Annual Conference of Institut für Chemische Technologie (ICT); 27-30 Jun 2000, Karlsruhe, Germany. (Unpublished)

Papadopoulos, Christopher A. (2000) Aileron augmented directional control and braking. (PhD thesis), Kingston University, .

Philbin, Simon (2000) Current strands of research in DERA on the chemistry of energetic materials and insensitive munitions. In: National Defense Industrial Association (NDIA) Annual Conference on Insensitive Munitions and Energetic Materials (IM/EM) Technology; 27-30 Nov 2000, San Antonio, U.S.A.. (Unpublished)

Qiu, H, Li, Y, Cheng, K, Li, Y. B. and Wang, J (2000) An approach to form deviation evaluation for CMM measurement of 2D curve contours. Journal of Materials Processing Technology, 107(1-3), pp. 119-126. ISSN (print) 0924-0136

Qiu, H., Li, Y.-B., Cheng, K., Li, Y. and Wang, J. (2000) A study on an evaluation method for form deviations of 2D contours from coordinate measurement. The International Journal of Advanced Manufacturing Technology, 16(6), pp. 413-423. ISSN (print) 0268-3768

Wang, Yawei, Zhou, Peilin and Roskilly, Tony (2000) A comparison study of diesel and rapeseed methyl ester droplet vaporisation rates with a high speed video photographic technology. In: CEC/SAE Spring Fuels & Lubricants Meeting & Exposition; Jun 2000, Paris, France. ISSN (print) 0148-7191

Wang, Yun-Feng (2000) The selection of rapid prototyping processes based on feature extraction from STL models. (PhD thesis), Kingston University, .

Welch, CS (2000) Ascending node alteration of polar orbiting spacecraft using low-thrust propulsion. Proceedings of the Institution of Mechanical Engineers, Part G, Journal of Aerospace Engineering, 214(G5), pp. 313-321. ISSN (print) 0954-4100

Wen, J.X. and Huang, L.Y. (2000) CFD modelling of confined jet fires under ventilation-controlled conditions. Fire Safety Journal, 34(1), pp. 1-24. ISSN (print) 0379-7112

Zhang, T., Gawne, D.T. and Liu, B. (2000) Computer modelling of the influence of process parameters on the heating and acceleration of particles during plasma spraying. Surface and Coatings Technology, 132(2-3), pp. 233-243. ISSN (print) 0257-8972

Zhang, T., Bao, Y. and Gawne, D.T. (2000) Temperature profiles and thermal stress analysis of plasma sprayed glass-composite coatings. In: 1st International Thermal Spray Conference; 8-11 May 2000, Montreal, Quebec, Canada. (Proceedings of the 1st International Thermal Spray Conference)

Zhou, P.L., Wang, Yawei and Roskilly, T. (2000) An investigation of droplet size and distribution in DI diesel sprays using laser PDA and mathematical regression techniques. Transactions - Institute of Marine Engineers, 112(3/4), pp. 103-113. ISSN (print) 0020-2924

Zweiri, Y. H., Whidborne, J. F. and Seneviratne, L. D. (2000) Instantaneous friction components model for transient engine operation. Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 214(D7), 809 - 824. ISSN (print) 0954-4070

Zweiri, Yahya H., Whidbourne, James F. and Seneviratne, Lakmal D. (2000) Numerical inversion of the dynamic model of a single-cylinder diesel engine. Communications in Numerical Methods in Engineering, 16(7), 505 - 517. ISSN (print) 1069-8299