Items where Kingston Author is "Gnanasagaran, Constance"

Article

Azadani, Meysam Nasr, Abdi, Meisam, Ramachandran, Karthikeyan and Gnanasagaran, Constance L (2025) A comparative analysis of mechanical and surface properties of FCC lattice in FFF and MJF based additive manufacturing. Progress in Additive Manufacturing, ISSN (print) 2363-9512 (Epub Ahead of Print)

Azadani, Meysam Nasr, Narayanan, Nandhu, Ramachandran, Karthikeyan and Gnanasagaran, Constance L (2025) Optimizing tibia implants : comparative study of lattice designs and material performance under gait cycles. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, ISSN (print) 0954-4062 (Epub Ahead of Print)

Thirugnanasamabandam, Arunkumar, Nallamuthu, Ramasamy, Renjit, Malavika and Gnanasagaran, Constance L (2024) 3D printed PLA/PMMA polymer composites : a consolidated feasible characteristic investigation for dental applications. Polymer Engineering and Science, 64(9), pp. 4019-4031. ISSN (print) 0032-3888

Thirugnanasambandam, Arunkumar, Dutta, Hrishikesh, Gnanasagaran, Constance L. and Kechagias, John D. (2024) Development of 3D printed novel multi-polymer component based on blended filaments of polylactic acid and polyethylene terephthalate glycol. Progress in Additive Manufacturing, ISSN (print) 2363-9512 (Epub Ahead of Print)

Ramachandran, Karthikeyan and Gnanasagaran, Constance L. (2024) Life cycle assessment of sugarcane bagasse based natural composites prepared via vacuum bagging technique. Bioresource Technology Reports, p. 101811. ISSN (print) 2589-014X (Epub Ahead of Print)

Ramachandran, Karthikeyan, Azadani, Meysam Nasr, Ravichandran, Prithviraj, Shivaprakash, Nithyasri Bangalore, Obi, Martins and Gnanasagaran, Constance L. (2024) Failure mechanics of fused filament fabricated nylon/carbon reinforced composites. Progress in Additive Manufacturing, ISSN (print) 2363-9512 (Epub Ahead of Print)

Gnanasagaran, Constance L., Ramachandran, Karthikeyan, Kumar, Vishaal Harikrishna, Ramachandran, Vishwanathan and Rangarajan, Murali (2024) Influence of infill patterns on mechanical properties of 3D printed Al₂O₃ ceramics via fused filament fabrication. Ceramics International, ISSN (print) 0272-8842 (Epub Ahead of Print)

Gnanasagaran, Constance, Ramachandran, Karthikeyan, Jamadon, Nashrah H., Kumar, Vishaal H., Muchtar, Andanastuti, Pazhani, Ashwath and Ayaz, Beenish (2023) Microstructural and mechanical behaviours of Y-TZP prepared via slip-casting and fused deposition modelling (FDM). Heliyon, 9, e21705. ISSN (online) 2405-8440

An, Xinyi, Chong, Perk Lin, Zohourkari, Iman, Roy, Sandipan, Merdji, Ali, Gnanasagaran, Constance Linda, Faraji, Foad, Moey, Lip Kean and Yazdi, Mohammad Hossein (2023) Mechanical influence of tissue scaffolding design with different geometries using finite element study. Journal of Engineering in Medicine, ISSN (print) 0954-4119 (Epub Ahead of Print)

Ramachandran, Karthikeyan, Gnanasagaran, Constance L, Pazhani, Ashwath, Kumar, Vishaal Harikrishna, Xavior, M. Anthony, Subramani, R Ram and Arunkumar, T. (2023) Impact behaviour of MWCNTs reinforced YSZ and Al₂O₃ ceramic-nanocomposites prepared via vacuum hot-pressing technique. Journal of Materials Research and Technology, 24, pp. 6595-6603. ISSN (print) 2238-7854

Ramachandran, Karthikeyan, Gnanasagaran, Constance L, Subramani, R Ram, Boopalan, Vignesh and T, Arunkumar (2023) Influence of ceramic nanoparticles on fatigue life of Al 6061 prepared via ultrasonic aided rheo-squeeze casting process. Advances in Materials and Processing Technologies, ISSN (print) 2374-068X (Epub Ahead of Print)

Ramachandran, Karthikeyan, Gnanasagaran, Constance L and Vekariya, Ashish (2023) Life cycle assessment of carbon fiber and bio-fiber composites prepared via vacuum bagging technique. Journal of Manufacturing Processes, 89, pp. 124-131. ISSN (print) 1526-6125

Sabri, Ban Ali, Satgunam, Meenaloshini, Manap, A., Gnanasagaran, Constance L. and Ramachandran, Karthikeyan (2023) Physical and chemical investigation of TiO₂ nanotubes treated with isopropyl triisostearoyl titanate (KR-TTS). Journal of Nanomaterials, 2023, p. 7961857. ISSN (print) 1687-4110

Gnanasagaran, Constance Linda, Ramachandran, Karthikeyan, Ramesh, S., Ubenthiran, Sutharsini and Jamadon, Nashrah Hani (2022) Effect of co-doping manganese oxide and titania on sintering behaviour and mechanical properties of alumina. Ceramics International, ISSN (print) 0272-8842 (Epub Ahead of Print)

Linda, C., Meenaloshini, S., Zaimah, H. and Noor Zaimah, M. (2014) An analysis on the implementation of industrial training for mechanical engineering students in Uniten. International Journal of Asian Social Science, 4(5), pp. 664-669. ISSN (print) 2226-5139

Conference or Workshop Item

Gnanasagaran, Constance (2023) Degradation, bioactivity and cytotoxicity evaluation of polyhydroxyalkanoate (PHA) reinforced with nano-calcium phosphate (nCaP) and chitosan for bone regeneration. In: 3rd Edition of International Conference on Tissue Engineering and Regenerative Medicine; 21-23 Aug 2023, London, U.K.. (Unpublished)

Gnanasagaran, Constance, Ramachandran, Karthikeyan and Chong, Perk Lin (2023) Influence of infill patterns on mechanical properties of 3D printed ceramics Al₂O₃ via fused deposition modelling for biomedical applications. In: UK Society for Biomaterials (UKSB) Annual Conference 2023; 20-21 Jun 2023, Belfast, Northern Ireland. U.K.. (Unpublished)

Gnanasagaran, C., Ramesh, S., Ibrahim, Zunaidi and Sutharsini, U. (2021) Sintering behaviour of alumina doped with small amounts of manganese and titania. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET 2021); 08-10 Nov 2021, Brunei Darussalam (held online).

Linda, Constance, Long, Chua Yaw, Tiong, Tay Tee and Yan, Koh Yit (2016) Overview of peer review assessment for mechanical design process project in Universiti Tenaga Nasional, Malaysia. In: SEAAIR 2016 16th Annual Conference; 21-23 September 2016, Suan Dusit University, Thailand.. (Submitted)

Constance, L., Ramesh, S., Ting, C.H. and Tan, C.Y (2009) Effect of sintering additives on the properties of alumina ceramic. In: National Postgraduate Conference on Engineering, Science & Technology NPC2009; 25-26 March 2009, Perak, Malaysia.. (Unpublished)