E

Eames, IW and Sabir, HM (1997) Potential benefits of electrohydrodynamic enhancement of two-phase heat transfer in the design of refrigeration systems. APPLIED THERMAL ENGINEERING, 17(1), pp. 79-92. ISSN (print) 1359-4311

Eames, IW, Marr, NJ and Sabir, HM (1997) The evaporation coefficient of water. International Journal of Heat and Mass Transfer, 40(12), pp. 2963-2973. ISSN (print) 0017-9310

G

Grant, R J and Smart, J (1997) A parametric study of the elastic stress distribution in pin-loaded tubes. Journal of Strain Analysis for Engineering Design, 32(3), pp. 213-228. ISSN (print) 0309-3247

H

Haque, MN, Ransom, ECP and Self, A (1997) High performance supersonic aircraft intake design. In: UNSPECIFIED, (ed.) 20th Congress of the International Council of the Aeronautical Sciences. Reston, VA, U.S.A. : American Institute of Aeronautics and Astronautics. pp. 1004-1014. (AIAA Conference Proceedings Series, (ICAS 199)) ISBN 1563472198

K

Kapadoukas, GG, Self, AW and Marteau, F (1997) The simulation of aircraft landing gears during usual and unusual manoeuvers. In: UNSPECIFIED, (ed.) 20th Congress of the International Council of the Aeronautical Sciences. Reston, VA, U.S.A. : American Institute of Aeronautics & Astronautics. pp. 2678-2688. (AIAA Conference Proceedings Series, (ICAS 199)) ISBN 1563472198

Kennedy, T., Self, D. G., Self, A and Safa, M. (1997) The manufacture of a low cost instrument for the Mars 96 mission. In: Factory 2000 - The Technology Exploitation Process, Fifth International Conference; 2-4 April 1997, London, UK. (IEE Conference Publication, no. 435) ISSN (print) 0537-9989 ISBN 0852966822

S

Steidler, S., Hadavinia, H., Durodola, J. and Beevers, A. (1997) Stiffness characteristics of adhesive joints in vehicle body structures: a comparison between FE models and experimental measurement. In: Mechanical behaviour of adhesive joints: analysis, testing and design. 38th Euromech Colloquium; 4-6 Sept 1997, Nevers, France. (Euromech Colloquium, no. 358)

T

Thompson, S. J. and Safa, M.M.A. (1997) Development of an automated high accuracy pH measuring instruments with full audit reporting facility. In: Factory 2000 - The Technology Exploitation Process, Fifth International Conference; 2-4 April 1997, Cambridge, UK. (IEE Conference Publications, no. 435) ISSN (print) 0537-9989 ISBN 0852966822

Z

Zhang, T, Gawne, DT and Bao, Y (1997) The influence of process parameters on the degradation of thermally sprayed polymer coatings. Surfaces and Coatings Technology, 96(2-3), pp. 337-344. ISSN (online) 0257-8972

Zhang, T., Blackburn, S. and Bridgwater, J. (1997) Orientation of binders and particles during ceramic injection moulding. Journal of the European Ceramic Society, 17(1), pp. 101-108. ISSN (print) 0955-2219