D

Dembele, S, Delmas, A and Sacadura, JF (1996) Shielding fire thermal radiation by water spray curtains: some improvements in radiative transfer modelling. In: Industrial Fires III Proceedings; 17-18 Sep 1996, Roskilde, Denmark. (EUR 17477) ISBN 8755022871

E

Everington, M. and Augousti, A.T. (1996) Non-contact measurement of rotating shaft characteristics using optical fibre techniques. Optical Fiber Technology, 2(4), pp. 394-399. ISSN (print) 1068-5200

H

Haque, MN, Ransom, ECP and Self, A (1996) High performance supersonic aircraft intake design. In: 20th Congress of the International Council of the Aeronautical Sciences; 8-13 Sep 1996, Sorrento, Italy. (AIAA Conference Proceedings Series) ISBN 1563472198

K

Kapadoukas, GG, Self, AW and Marteau, F (1996) The simulation of aircraft landing gears during usual and unusual manoeuvres. In: 20th Congress of the International Council of the Aeronautical Sciences; 8-13 Sep 1996, Sorrento, Italy. (AIAA Conference Proceedings Series) ISBN 1563472198

L

Lung, A. and Mebrahtu, H. (1996) Using expert system to aid interpreting manufacturing simulation results. In: 12th International Conference on CAD/CAM Robotics and Factories of the Future; 14-16 Aug 1996, London, U.K.. ISBN 9781898253037

M

Mark, N.J., Augousti, A.T. and Belli, A.-M. (1996) A Study of the Radiological Use of Laser Angioplasty in Britain. Lasers in Medical Science, 11(2), pp. 79-95. ISSN (print) 0268-8921

S

Sabir, HM, Suen, KO and Vinnicombe, GA (1996) Investigation of effects of wave motion on the performance of a falling film absorber. International Journal of Heat and Mass Transfer, 39(12), pp. 2463-2472. ISSN (print) 0017-9310

Y

Yao, Yufeng (1996) High order resolution and parallel implementation on unstructured grids. (PhD thesis), University of Glasgow, .

Z

Zhang, T., Evans, J.R.G. and Bevis, M. (1996) Control of orientation in short fibre-reinforced metal matrix composites. International Journal of Powder Metallurgy, 32(4), pp. 331-339. ISSN (print) 0888-7462

Zhang, T., Blackburn, S. and Bridgwater, J. (1996) Debinding and sintering defects from particle orientation in ceramic injection moulding. Journal of Materials Science, 31(22), pp. 5891-5896. ISSN (print) 0022-2461

Zhang, Tao, Evans, J.R.D and Bevis, M. (1996) The control of fibre orientation in ceramic and metal composites by open-ended injection moulding. Composites Science and Technology, 56(8), pp. 921-928. ISSN (print) 0266-3538