B

Bromhead, E.N. (1997) The treatment of landslides. Proceedings of the ICE - Geotechnical Engineering, 125(2), pp. 85-96. ISSN (print) 1353-2618

Bromhead, EN (1997) The treatment of landslides. Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, 125(2), pp. 85-96. ISSN (print) 1353-2618

Bromhead, Edward and Ibsen, Maia-Laura (1997) Land-use and climate-change impacts on landslide hazards in SE Britain. In: International Workshop on Landslide Risk Assessment; 19-21 Feb 1997, Honolulu, U.S.. ISBN 9789054109143

E

Eames, IW and Sabir, HM (1997) Potential benefits of electrohydrodynamic enhancement of two-phase heat transfer in the design of refrigeration systems. APPLIED THERMAL ENGINEERING, 17(1), pp. 79-92. ISSN (print) 1359-4311

Eames, IW, Marr, NJ and Sabir, HM (1997) The evaporation coefficient of water. International Journal of Heat and Mass Transfer, 40(12), pp. 2963-2973. ISSN (print) 0017-9310

G

Grant, R J and Smart, J (1997) A parametric study of the elastic stress distribution in pin-loaded tubes. Journal of Strain Analysis for Engineering Design, 32(3), pp. 213-228. ISSN (print) 0309-3247

H

Haque, MN, Ransom, ECP and Self, A (1997) High performance supersonic aircraft intake design. In: UNSPECIFIED, (ed.) 20th Congress of the International Council of the Aeronautical Sciences. Reston, VA, U.S.A. : American Institute of Aeronautics and Astronautics. pp. 1004-1014. (AIAA Conference Proceedings Series, (ICAS 199)) ISBN 1563472198

Huang, L.Y., Wen, J.X., Karayiannis, T G and Matthews, R D (1997) CFD modelling of heat transfer in condensing heat exchangers. International Journal of Heat and Technology, 15(1), pp. 23-30. ISSN (print) 0392-8764

I

Ibsen, M.-L. and Bromhead, E.N. (1997) Head scarps and toe heaves. In: Magnitude and frequency in Geomorphology: Proceedings of the Fourth International Conference on Geomorphology; 28 Aug - 3 Sep 1997, Bologna, Italy. (Magnitude and frequency in Geomorphology: Annals of Geomorphology, no. 115) ISSN (print) 0044-2798 ISBN 9783443211158

Ibsen, M.-L. and Brunsden, D. (1997) Mass movement and climatic variation on the south coast of Great Britain. Paläoklimaforschung - Palaeoclimate Research, 19, pp. 171-182. ISSN (print) 0930-4673

K

Kapadoukas, GG, Self, AW and Marteau, F (1997) The simulation of aircraft landing gears during usual and unusual manoeuvers. In: UNSPECIFIED, (ed.) 20th Congress of the International Council of the Aeronautical Sciences. Reston, VA, U.S.A. : American Institute of Aeronautics & Astronautics. pp. 2678-2688. (AIAA Conference Proceedings Series, (ICAS 199)) ISBN 1563472198

Kennedy, T., Self, D. G., Self, A and Safa, M. (1997) The manufacture of a low cost instrument for the Mars 96 mission. In: Factory 2000 - The Technology Exploitation Process, Fifth International Conference; 2-4 April 1997, London, UK. (IEE Conference Publication, no. 435) ISSN (print) 0537-9989 ISBN 0852966822

M

Mangat, P.S. and Limbachiya, M.C. (1997) Repair material properties for effective structural application. Cement and Concrete Research, 27(4), pp. 601-617. ISSN (print) 0008-8846

Z

Zhang, T, Gawne, DT and Bao, Y (1997) The influence of process parameters on the degradation of thermally sprayed polymer coatings. Surfaces and Coatings Technology, 96(2-3), pp. 337-344. ISSN (online) 0257-8972

Zhang, T., Evans, J.R.G. and Bevis, M. (1997) Analysis of open-ended injection molding. Advances in Polymer Technology, 16(2), pp. 105-115. ISSN (print) 0730-6679

Zhang, T., Blackburn, S. and Bridgwater, J. (1997) Orientation of binders and particles during ceramic injection moulding. Journal of the European Ceramic Society, 17(1), pp. 101-108. ISSN (print) 0955-2219