Items where Research Area is "Chemical engineering"
Number of items at this level: 83.
An, Liantong, Gao, Yang and Zhang, Tao (2007) Effect of powder injection location on ceramic coatings properties when using plasma spray. Journal of Thermal Spray Technology, 16(5-6), pp. 967-973. ISSN (print) 1059-9630
Atkinson, P.A., Haines, P.J. and Skinner, George (2000) Inorganic tin compounds as flame retardants and smoke suppressants for polyester thermosets. Thermochimica Acta, 360(1), pp. 29-40. ISSN (print) 0040-6031
Atkinson, P.A., Haines, P.J., Skinner, G.A. and Lever, T.J. (2000) Studies of fire-retardant polyester thermosets using thermal methods. Journal of Thermal Analysis and Calorimetry, 59(1-2), pp. 395-408. ISSN (print) 1388-6150
Bao, Y., Gawne, D.T., Zhang, T., Qiu, Z. and Zhang, K. (2000) Influence of secondary phase on residual stress of plasma sprayed glass coating. Surface Engineering, 16( 6), pp. 473-479. ISSN (print) 0267-0844
Bao, Y., Zhang, T. and Gawne, D.T. (1998) The mechanism of crack formation in plasma sprayed enamel. Transactions of the Institute of Metal Finishing, 76( 6), pp. 213-216. ISSN (print) 0020-2967
Barton, Stephen J and Pritchard, Geoffrey (1994) The moisture absorption characteristics of crosslinked vinyl terminated polyethers compared with epoxies. Polymers for Advanced Technologies, 5(5), pp. 245-252. ISSN (print) 1042-7147
Bavisi, B.H., Pritchard, G. and Ghotra, J.S. (1996) Measuring and reducing moisture penetration through thick laminates. Advances in Polymer Technology, 15(3), pp. 223-235. ISSN (print) 0730-6679
Bergman, J.S., Duffin, H.C. and Wells, C.H.J. (1998) Studies on 2,4,6-trinitrophenyl substituted naphthalenes. Part IV: Synthesis of nitro- and polynitro-di-(2,4,6-trinitrophenyl)naphthalenes. "Propellants, Explosives, Pyrotechnics", 23(4), pp. 208-211. ISSN (print) 0721-3115
Bergman, J.S., Duffin, H.C. and Wells, C.H.J. (1997) Studies on 2,4,6-trinitrophenyl substituted naphthalenes. Part III: Synthesis of nitro- and polynitro-1-methyl-4-(2,4,6-trinitrophenyl) naphthalenes. "Propellants, Explosives, Pyrotechnics", 22(5), pp. 301-305. ISSN (print) 0721-3115
Bergman, John S., Duffin, Henry C., Golding, Peter and Wells, Clifford H.J. (1996) Studies on 2,4,6-trinitrophenyl substituted naphthalenes. Part II. Synthesis of nitro- and polynitro-1-(2,4,6-trinitrophenyl)naphthalenes. "Propellants, Explosives, Pyrotechnics", 21(5), pp. 227-230. ISSN (print) 0721-3115
Cox, Sophie C, Jamshidi, Parastoo, Eisenstein, Neil M, Webber, Mark A, Hassanin, Hany, Attallah, Moataz M, Shepherd, Duncan E T, Addison, Owen and Grover, Liam M (2016) Adding functionality with additive manufacturing : fabrication of titanium-based antibiotic eluting implants. Materials Science & Engineering C - Materials for Biological Applications, 64, pp. 407-415. ISSN (print) 0928-4931
Cuming, S. and Wells, C.H.J. (1996) A study of some charge-transfer complexes of 2-methyl-1,3,6,8-tetranitronaphthalene. "Propellants, Explosives, Pyrotechnics", 21(1), pp. 40-42. ISSN (print) 0721-3115
Dogan, Faith, Hadavinia, Homayoun, Barton, Stephen J and Mason, Peter J. (2010) Applications of intrinsically conducting polymers. Recent Patents on Mechanical Engineering, 3(3), pp. 174-182. ISSN (print) 2212-7976
Duffin, H.C., Golding, P. and Wells, C.H.J. (1998) A parametric study of the synthesis of 4,4 ',5,5 ',7,7 '-hexanitro-1,1 '-binaphthyl. Propellants, Explosives, Pyrotechnics, 23(5), pp. 244-245. ISSN (print) 0721-3115
Elsayed, Ahmed, Elsayed, Eman, AL-Dadah, Raya, Mahmoud, Saad, ElShaer, Amr and Kaialy, Waseem (2016) Thermal energy storage using metal–organic framework materials. Applied Energy, ISSN (print) 0306-2619 (Epub Ahead of Print)
Evans, S.J., Haines, P.J. and Skinner, G.A. (1997) The thermal degradation of polyester resins II. The effects of cure and of fillers on degradation. Thermochimica Acta, 291(1-2), pp. 43-49. ISSN (print) 0040-6031
Ferraris, S.A. and Wen, J. (2008) LES of the SANDIA Flame D using Laminar Flamelet Decomposition for conditional source-term estimation. Flow Turbulence and Combustion, 81(4), pp. 609-639. ISSN (print) 1386-6184
French, M.A. and Pritchard, G. (1992) Environmental stress corrosion of hybrid fibre composites. Composites Science and Technology, 45(3), pp. 257-263. ISSN (print) 0266-3538
Gawne, D.T., Zhang, T. and Bao, Y. (2001) Abrasive wear resistance of plasma-sprayed glass-composite coatings. Journal of Thermal Spray Technology, 10(4), pp. 599-603. ISSN (print) 1059-9630
Georgiades, Savvas N., Vamvakaki, Maria and Patrickios, Costas S. (2002) Synthesis and Characterization of Double-Hydrophilic Model Networks Based on Cross-Linked Star Polymers of Poly(Ethylene Glycol) Methacrylate and Methacrylic Acid. Macromolecules, 35(13), pp. 4903-4911. ISSN (print) 0024-9297
Gundogdu, O., Koenders, M. A., Wakeman, R.J. and Wu, P. (2003) Vibration-assisted dead-end filtration: experiments and theoretical concepts. Chemical Engineering Research and Design, 81(8), pp. 916-923. ISSN (print) 0263-8762
Gundogdu, O., Koenders, M., Wakeman, R.J. and Wu, P. (2003) Permeation through a bed on a vibrating medium: theory and experimental results. Chemical Engineering Science, 58(9), pp. 1703-1713. ISSN (print) 0009-2509
HAN, Tong-wei, He, Peng-fei, Wang, Jian and Wu, Ai-hui (2010) Molecular dynamics simulation of single graphene sheet under tension. New Carbon Materials, 25(4), pp. 261-266. ISSN (print) 1872-5805
Heidari, A., Ferraris, S., Wen, J.X. and Tam, V.H.Y. (2011) Numerical simulation of large scale hydrogen detonation. International Journal of Hydrogen Energy, 36(3), pp. 2538-2544. ISSN (print) 0360-3199
Heidari, A. and Mazaheri, K. (2008) Determination of the equilibrium parameters of gaseous detonation using a genetic algorithm. Iranian Journal of Chemical Engineering, 5(3), pp. 3-13. ISSN (print) 1735-5397
Jones, Keith, Brunton, Shirley A. and Gosain, Rajendra (1999) The aryl radical route to oxindoles: dependence on temperature and tin hydride concentration. Tetrahedron Letters, 40(50), pp. 8935-8938. ISSN (print) 0040-4039
Kilchherr, R., Koenders, M. A., Wakeman, R. J. and Tarleton, E. S. (2004) Transport processes during electrowashing of filter cakes. Chemical Engineering Science, 59(5), pp. 1103-1114. ISSN (online) 0009-2509
Koenders, M., Liebhart, E. and Wakeman, R.J. (2001) Dead-end filtration with torsional shear: experimental findings and theoretical analysis. Chemical Engineering Research and Design, 79(3), pp. 249-259. ISSN (print) 0263-8762
Koenders, M.A. and Wakeman, R.J. (1997) Filter cake formation from structured suspensions. Chemical Engineering Research and Design, 75(3), pp. 309-320. ISSN (print) 0263-8762
Koenders, M. A. and Wakeman, R.J. (1996) The initial stages of compact formation from suspensions by filtration. Chemical Engineering Science, 51(16), pp. 3897-3908. ISSN (print) 0009-2509
Koenders, M.A., Reymann, S. and Wakeman, R.J. (2000) The intermediate stage of the dead-end filtration process. Chemical Engineering Science, 55(18), pp. 3715-3728. ISSN (print) 0009-2509
Li, Sheng, Hassanin, Hany, Attallah, Moataz, Adkins, Nicholas and Essa, Khamis (2016) The development of TiNi-based negative poisson's ratio structure using selective laser melting. Acta Materialia, 105, pp. 75-83. ISSN (print) 1359-6454
Ozdemir, Nazli G., Zhang, Tao, Hadavinia, Homayoun, Aspin, Ian and Scarpa, Fabrizio (2016) Glass fibre reinforced polymer composites toughened with acrylonitrile butadiene nanorubber. Composites Part B Engineering, 88, pp. 182-188. ISSN (print) 1359-8368
Ozdemir, Nazli G., Zhang, Tao, Hadavinia, Homayoun, Aspian, Ian and Scarpa, Fabrizio (2015) Influence of nanorubber toughening on the tensile deformation and tensile fatigue behaviour of a carbon fibre-reinforced epoxy composite. Journal of Composite Materials, ISSN (print) 0021-9983 (Epub Ahead of Print)
Ozdemir, Nazli G., Zhang, Tao, Hadavinia, Homayoun, Aspin, Ian and Wang, Jian (2015) Rheological properties, cure characteristics, and morphology of acrylonitrile-based nanorubber modified epoxy. Journal of Applied Polymer Science, 132(18), ISSN (print) 0021-8995
Page, Nigel M., Morrish, Donald W. and Weston-Bell, Nicola J. (2009) Differential mRNA splicing and precursor processing of neurokinin B in neuroendocrine tissues. Peptides, 30(8), pp. 1508-1513. ISSN (print) 0196-9781
Paul, Parneet and Jones, Franck Anderson (2016) Advanced wastewater treatment engineering : investigating membrane fouling in both rotational and static membrane bioreactor systems using empirical modelling. International Journal of Environmental Research and Public Health, 13(1), p. 100. ISSN (print) 1661-7827
Paul, Parneet and Jones, Franck Anderson (2015) Development of a comprehensive fouling model for a rotating membrane bioreactor system treating wastewater. Water, 7(2), pp. 377-397. ISSN (online) 2073-4441
Pereira, J. M, Ghasemnejad, H., Wen, J.X and Tam, V.H.Y (2011) Blast response of cracked steel box structures repaired with carbon fibre-reinforced polymer composite patch. Materials & Design, 32(5), pp. 3092-3098. ISSN (print) 0261-3069
Pritchard, G., Swan, M. and Rose, R.G. (1995) Plastic zone radius of crosslinked bismaleimide resins. Polymer International, 36(1), pp. 1-8. ISSN (print) 0959-8103
Pritchard, G. and Yang, Qiang (1994) Microscopy of impact damage in particulate-filled glass-epoxy laminates. Journal of Materials Science, 29(19), pp. 5047-5053. ISSN (print) 0022-2461
Russell, Andrea E., Maniguet, Stephanie, Mathew, Rebecca J., Yao, Jun, Roberts, Mark A. and Thompsett, David A. (2001) In situ X-ray absorption spectroscopy and X-ray diffraction of fuel cell electrocatalysts. Journal of Power Sources, 96(1), pp. 226-232. ISSN (print) 0378-7753
Shahzad, Moazzam, Khan, Sher Jamal and Paul, Parneet (2015) Influence of temperature on the performance of a full-scale activated sludge process operated at varying solids retention times whilst treating municipal sewage. Water, 7(3), pp. 855-867. ISSN (online) 2073-4441
Torabmostaedi, H. and Zhang, T. (2014) Effect of nozzle geometry and processing parameters on the formation of nanoparticles using FSP. Chemical Engineering Research and Design, 92(11), 2470-2478. ISSN (print) 0263-8762
Torabmostaedi, H., Zhang, T., Foot, P. J., Dembele, S. and Fernandez, C. (2013) Process control for the synthesis of ZrO2 nanoparticles using FSP at high production rate. Powder Technology, 246, pp. 419-433. ISSN (print) 0032-5910
Torabmostaedi, Hosein and Zhang, Tao (2014) Computational study of the effect of processing parameters on the formation and growth of ZrO2 nanoparticles in FSP process. Chemical Engineering and Processing: Process Intensification, 78, pp. 1-10. ISSN (print) 0255-2701
Torabmostaedi, Hosein and Zhang, Tao (2014) Numerical optimization of quenching efficiency and particle size control in flame synthesis of zro2 nanoparticles. Journal of Thermal Spray Technology, 23(8), pp. 1478-1492. ISSN (print) 1059-9630
Tota-Maharaj, K. and Paul, P. (2015) Evaluation of the solar photocatalytic degradation of organochlorine compound trichloroethanoic acid using titanium dioxide and zinc oxide in the Caribbean region. Water Science and Technology : Water Supply, 15(3), pp. 559-568. ISSN (print) 1606-9749
Tota-Maharaj, Kiran and Paul, Parneet (2015) Performance of pilot-scale microbial fuel cells treating wastewater with associated bioenergy production in the Caribbean context. International Journal of Energy and Environmental Engineering, 6(3), pp. 213-220. ISSN (print) 2008-9163
Wang, Z.P., Ghotra, J.S., Pritchard, G. and Rose, R.G. (1997) The mechanical properties of particulate-filled aramid and polyethylene laminates. Polymer International, 42(3), pp. 241-244. ISSN (print) 0959-8103
Wen, J. X., Rao, V. C. M. and Tam, V. H. Y. (2010) Numerical study of hydrogen explosions in a refuelling environment and in a model storage room. International Journal of Hydrogen Energy, 35(1), pp. 385-394. ISSN (print) 0360-3199
Wilkinson, John L., Swinden, Julian, Hooda, Peter S., Barker, James and Barton, Stephen (2016) Markers of anthropogenic contamination : a validated method for quantification of pharmaceuticals, illicit drug metabolites, perfluorinated compounds, and plasticisers in sewage treatment effluent and rain runoff. Chemosphere, 159, pp. 638-646. ISSN (print) 0045-6535
Xu, B.P., Hima, L.EL., Wen, J.X. and Tam, V.H.Y. (2009) Numerical study of spontaneous ignition of pressurized hydrogen release into air. International Journal of Hydrogen Energy, 34(14), pp. 5954-5960. ISSN (print) 0360-3199
Xu, B.P., Wen, J. X., Dembele, S., Tam, V.H.Y. and Hawksworth, S.J. (2009) The effect of pressure boundary rupture rate on spontaneous ignition of pressurized hydrogen release. Journal of Loss Prevention in the Process Industries, 22(3), pp. 279-287. ISSN (print) 0950-4230
Xu, B. P. and Wen, J. X. (2012) Numerical study of spontaneous ignition in pressurized hydrogen release through a length of tube with local contraction. International Journal of Hydrogen Energy, 37(22), pp. 17571-17579. ISSN (print) 0360-3199
Xu, Hu, Bao, Yuqing, Gawne, David T. and Zhang, Tao (2016) Process control for thermal-spray deposition of thermoset coatings using computer simulation. Progress in Organic Coatings, 101, pp. 407-415. ISSN (print) 0300-9440
Yang, Q., Pritchard, G., Phipps, M.A. and Rose, R.G. (1996) The damage tolerance of fire-retardant glass-epoxy laminates. Polymers and Polymer Composites, 4(4), pp. 239-246. ISSN (print) 0967-3911
Yannopoulis, SN, Zouganelis, GD, Nurmohamed, S, Smith, JR, Bouropoulos, N, Calabrese, G, Fatouros, DG and Tsibouklis, J (2010) Physisorbed o-carborane onto lyso-phosphatidylcholine-functionalized, single-walled carbon nanotubes: a potential carrier system for the therapeutic delivery of boron. Nanotechnology, 21(8), Article number 085101. ISSN (print) 0957-4484
Yap, H.Y. and Nixon, J.D. (2015) A multi-criteria analysis of options for energy recovery from municipal solid waste in India and the UK. Waste Management, ISSN (print) 0956-053X (Epub Ahead of Print)
Zhang, J., Dembele, S. and Wen, J.X. (2009) Investigation of turbulence models for CFD simulations of gas and liquid pool fires. Journal of Fire Sciences, 27(2), pp. 157-182. ISSN (print) 0734-9041
Volkov, Konstantin (2010) Combustion of single aluminium droplet in two-phase flow. In: Stoev, George I., (ed.) Heterogeneous Combustion. Hauppauge NY, U.S.A. : Nova Science. pp. 191-260. (Chemical Engineering Methods and Technology) ISBN 9781617613241
Conference or Workshop Item
Heidari, A., Pereira, J.M., Wen, J., Tam, V., Ghasemnejad, H., Shariff, H., Donchev, T. and Johnson, M (2011) Towards understanding the Buncefield explosion through advanced numerical analysis and experimental investigations. In: Hazards XXII - process safety and environmental protection ; 11-14 Apr 2011, Liverpool, U.K..
Kinloch, A. J., Hadavinia, H., Kawashita, L., Moore, D. R. and Williams, G. (2006) Modelling of elastic-plastic peel tests for structural adhesives. In: 16th European Conference of Fracture; 03 - 07 Jul 2006, Alexandroupolis, Greece. ISBN 9781402049712
Lai, Cheng-Yuan, Foot, Peter J.S. and Brown, John W. (2008) The synthesis of novel electrochromic materials to increase the colour-changing service life of poly(3-hexylthiophene), and investigation of their optical and electrical properties. In: 59th Annual Meeting of the International Society of Electrochemistry; 7 - 12 Sept 2008, Seville, Spain. (Unpublished)
Tam, V.H.Y., Wang, M, Savvides, C.N., Tunc, E, Ferraris, S and Wen, J.X. (2008) Simplified flammable gas volume methods for gas explosion modelling from pressurized gas releases: a comparison with large scale experimental data. In: Institution of Chemical Engineers Symposium Series: Hazards XX: Process Safety and Environmental Protection, Harnessing Knowledge, Challenging Complacency; 15-17 April 2008, Manchester, UK. (IChemE Symposium series , no. 154)
Tam, V.H.Y., Xu, B.P. and Wen, J.X. (2008) The dispersion characteristics of micromist in enclosures - a proof of concept numerical study on using micromist as a soft barrier for explosion control. In: Seventh International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions; 7-11 July 2008, St. Petersburg, Russia. (Unpublished)
Taylor, A C, Hadavinia, H, Kinloch, A J and Lees, J H (2005) Nano and micro particles in adhesives: mechanical properties and modelling. In: 42nd Annual Conference on Adhesion and Adhesives; 26 Jan 2005, Oxford, U.K.. (Unpublished)
Tsakiropoulos, P. and Wang, Yawei (2004) A study of particle size and velocities distributions in centrifugal atomisation using mathematical regression techniques. In: TMS 2004 : 133rd Annual Meeting & Exhibition; 14-18 Mar 2004, Charlotte, North Carolina, U.S.. (Unpublished)
Volkov, Konstantin (2010) Interaction of laser pulse with oxygen and hydrogen mixture containing metal particles. In: IMA Conference on Fluid Problems in Process Engineering; 06 - 08 September 2010, Leeds, U.K..
Wen, J.X., Heidari, A., Madhav Rao, V.C. , Ferraris, S.A. and Tam, V.H.Y. (2010) Simulating flame propagation in obstructed channels with OpenFOAM. In: 6th International Seminar on Fire and Explosion Hazards; 11-16 April 2010, Leeds, UK.
Mason, Julian [Inventor], Augousti, Andy [Inventor], McMillan, Norman [Inventor], Smith, Stuart [Inventor] and Baker, Michael [Inventor] (2004) Julian Mason, Andy Augousti, Norman McMillan, Stuart Smith, Michael Baker Apparatus and method for measuring a property of a liquid. US6832506 (B1).
Barton, Stephen Jonathan (1992) The study of an electrically insulating resin for humid environments. (PhD thesis), Kingston University.
Budd, Darren (1995) Transition metal complexation of hetrocyclic conducting polymers. (PhD thesis), Kingston University.
Heidari, Ali (2012) Numerical simulation of deflagration to detonation transition in hydrogen explosion. (PhD thesis), Kingston University.
Hider, Jennifer Agnes (2003) Analysis of a thermosetting polyester resin with novel crosslinking agent. (PhD thesis), Kingston University.
Lilley, Peter A. (1994) An investigation of wear in lower limb endoprostheses. (PhD thesis), Kingston University.
Phipps, Mark Anthony (1995) The strength of alumina trihydrate filled epoxy resins. (PhD thesis), Kingston University.
Riedel, Sven Manfred (2007) Developments in tensiographic multivariate analysis leading to a new approach with prevalent applicability for sample fingerprinting and data representation. (PhD thesis), Kingston University.